2020 Kia Stinger TSBs

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2024MY vehicles (refer to the table on pages 9 and 10 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2024MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.

conducting a Voluntary Emissions Service Campaign on certain 2018-2021 MY Kia Stinger vehicles equipped with 2.0L Turbo GDI engines manufactured from September 29, 2017 to January 20, 2021 to improve the emissions logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations. This condition may cause the vehicle to release air pollutants that exceed Federal and California standards.

information to upgrade the software logic of the engine control module (ECM) with an improved version on 2018-2021MY Stinger (CK) vehicles equipped with a Theta 2.0L T-GDI ULEV engine manufactured from September 29, 2017 through January 20, 2021. The subject vehicles may have engine calibrations that were not optimized for emissions standards under certain specific conditions, which may cause the vehicle to release air pollutants which exceed Federal and California standards (such as NMOG (Non-Methane Organic Gas) and CO (Carbon Monoxide) during IUVP (In-Use Verification Program). To ensure compliance with emissions regulations, apply the improved logic to the ENGINE system using the KDS ECU Upgrade function as described in this bulletin.

dealer Parts and Service Managers that Kia is conducting a Voluntary Emissions Service Campaign on certain 2018-2021 MY Kia Stinger vehicles equipped with 2.0L Turbo GDI engines manufactured from September 29, 2017 to January 20, 2021 to improve the emissions logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations. This condition may cause the vehicle to release air pollutants that exceed Federal and California standards.

that Kia is conducting a Voluntary Emissions Service Campaign on certain 2018-2021 MY Kia Stinger vehicles equipped with 2.0L Turbo GDI engines manufactured from September 29, 2017 to January 20, 2021 to improve the emissions logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations. This condition may cause the vehicle to release air pollutants that exceed Federal and California standards.

replace the AVN head unit on some 2018-2020MY Stinger (CK) vehicles produced from October 1, 2017 through May 31, 2019, which exhibit intermittent audio dropping or audio sound cutting out concern while the engine is 'ON' or during normal driving operation. Confirm that the concern is present and place an order for the applicable AVN part required.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2021MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2021MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2021MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2019MY vehicles (refer to table below for applicable model and engine), which may exhibit a symptom of excessive oil consumption.

This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. - This bulletin provides information related to extracting in use performance tracking emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting.

information related to extracting "in use performance tracking" emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software on 5th Generation AVN wide on certain 2020-2024MY Kia vehicles (refer to model list on page 3) to remedy a 'non-responsive' or 'inoperative' radio (FM, AM, SXM, etc. ) concern. The affected AVN unit on the vehicles may not respond when pressing the 'RADIO' hard key/button on the AVN unit or when selecting the 'RADIO' icon on the AVN menu screen.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop contains information regarding the log file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.

the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster. The KDS is required to change the setting from "Workshop" to "Customer Mode."

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop contains information regarding the log file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.

operation of Multi-Function Camera (MFC) on some Kia vehicles. When normal operation is not possible due to certain outside environment conditions (such as sunlight glare, heavy rain, sunlight, snow, fog and/or substance/debris) causing a temporary concern. This stops operation causing Warning Lamp ON and/or Pop-up Message displayed on the cluster. This is a normal operation of the ADAS and once environment conditions improve and/or substance/debris are removed, the system will clear itself and operate normally.

the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a Warning Lamp to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission.

A flush is required ONLY when a transmission is replaced.

with the All-Wheel-Drive (AWD) system due to tire sizes of differing circumference. Some customers may complain of a chatter sensation felt in the drivetrain of the vehicle and/or the failure of drivetrain component(s). A difference in tire size (width, aspect ratio, construction, rim diameter etc.) may be the cause.

correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles in the chart starting on page 2.

the overhead console lamp assembly and sunglass door latch on some 2012-2023MY model vehicles listed in the table below, which may encounter the sunglass case of the overhead console lamp not closing properly.

rear sled assembly in the sunroof (left and right side) on some 2018-2023MY Stinger (CK) vehicles produced from September 21, 2017 through January 28, 2022, which may exhibit separation of the rear sled assembly in the sunroof mechanism, resulting in an inoperative sunroof.

New/revised sections of this bulletin are indicated by a black bar in the margin area. When servicing windshield wipers on the below listed vehicles, including during PDI, ensure to raise the wiper arms to a vertical position to avoid damaging the paint on the rear edge of the hood.

New/revised sections of this bulletin are indicated by a black bar in the margin area.This bulletin provides information on setting the "Service Interval Reminder" feature available on most 2014-2023MY Kia vehicles (refer to model list on page 2). If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance. Refer to TSB ENG241 for 2023MY~ vehicles equipped with the Oil Life Management System (OLMS) feature not included in table on page 2.

Interval Reminder" feature available on most Kia vehicles. If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance.

(SC281Y) - This bulletin provides information related to the Technical Service Bulletin previously published under SC281 titled High-Pressure Fuel Pump Inspection /Replacement and ECM Software Upgrade.

alignment on 2014MY and later vehicles that may exhibit a warning light ON related to radar sensor alignment errors in the Forward Collision-Avoidance Assist (FCA)/Smart Cruise Control (SCC) system.

the most frequently asked questions regarding the Voluntary Emissions Service Campaign (SC279).

bulletin provides information to repair an inoperative Dynamic Bending Light (DBL) by replacing the moisture absorbent and bracket on some 2018-2022MY Stinger (CK) vehicles produced from October 11, 2017 through April 27, 2022, which may exhibit a MIL 'ON' with DTC B232509 or B232609 (active or pending). This may be due to an expanded moisture absorbent causing the bracket to interfere with the DBL module. New parts are available to address this condition (see chart below for details).

substance found on some Kia vehicles, due to possible excess assembly oil applied during assembly.

2018-2023MY Stinger (CK) vehicles, after replacement of an MDPS and/or EPS unit. The selections on KGIS do not match those on the KDS. Follow the procedure below to perform variant coding on a newly replaced MDPS and/or EPS unit.

regarding the procedure to repair the bulb connector on some 2010MY~ vehicles listed on the table below, which may exhibit a bulb connector concern. To correct this concern, replace the connector with a new and improved part.