2017 Kia Sportage TSBs

(CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whole Integrated Body control Unit (IBU) / Body Control Module (BCM) did receive the Ant-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.

is conducting Customer Satisfaction Campaign. A software upgrade that addresses the social media theft method has been made available to owners of eligible Kia model vehicles free of charge at authorized Kia dealers since 2023. In addition to the anti-theft software, a new zinc-reinforced ignition cylinder protector hardware upgrade has been developed and can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because the subject Kia vehicles were not factory-equipped with an engine immobilizer and were previously eligible for the software upgrade, these vehicles are eligible until March 31, 2027, to have the ignition cylinder protector installedif requestedat no cost through an authorized Kia dealership. (Mailing of these notifications to vehicle owners will be completed from December 17, 2025 through February 27, 2026)

notification advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) for certain 2017-2022 MY Sportage vehicles equipped with 2.4L Gas Direct Injection (GDI) engines to ensure compliance with emissions regulations.

(CS2312) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 19, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.

notification advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) for certain 2017-2022 MY Sportage vehicles equipped with 2.4L Gas Direct Injection (GDI) engines to ensure compliance with emissions regulations.

(SC340) - This bulletin provides information to upgrade the Electronic Control Module ECM system software for certain 2016-2022MY vehicles equipped with 2.4L Theta II engines listed in the table below. Kia has become aware that certain 2016-2022MY vehicles equipped with 2.4L Theta II engines may have engine calibrations that were not optimized for emissions standards under certain specific conditions. These calibrations may cause the vehicle to release air pollutants which exceed Federal and California standards. These standards were established to protect your health and welfare from the dangers of air pollution.

bulletin has been revised to include additional information. New / revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to upgrade the Electronic Control Module ECM system software for certain 2016-2022MY vehicles equipped with 2.4L Theta II engines listed in the table below. Kia has become aware that certain 2016-2022MY vehicles equipped with 2.4L Theta II engines may have engine calibrations that were not optimized for emissions standards under certain specific conditions. These calibrations may cause the vehicle to release air pollutants which exceed Federal and California standards. These standards were established to protect your health and welfare from the dangers of air pollution.

to the dealer Parts and Service managers advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations in certain 2017-2022 MY Sportage vehicles manufactured from December 10, 2015, through December 7, 2021, certain 2016-2020 MY Optima vehicles manufactured from August 28, 2015, through June 23, 2020, and certain 2016-2020 MY Sorento vehicles manufactured from October 27, 2014, through November 4, 2020, equipped with 2.4L Theta GDI engines.

principals advising that Kia is conducting a Voluntary Emissions Service Campaign to improve the emissions software logic in the Electronic Control Module (ECM) to ensure compliance with emissions regulations in certain 2017-2022 MY Sportage vehicles manufactured from December 10, 2015, through December 7, 2021, certain 2016-2020 MY Optima vehicles manufactured from August 28, 2015, through June 23, 2020, and certain 2016-2020 MY Sorento vehicles manufactured from October 27, 2014, through November 4, 2020, equipped with 2.4L Theta GDI engines.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2024MY vehicles (refer to the table on pages 9 and 10 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2024MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.

This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information related to the Technical Service Bulletin previously published PI1802 titled "Knock Sensor Detection System - ECU Logic Improvement"; equipped w/THETA II engine. Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal Range/Performance).

test procedure of the Bearing Clearance Tester (BCT) Special Service Tool (SST). The SST comes pre-calibrated from the supplier however, in some cases, due to variable shop compressor air pressure, the SST may need to be re-calibrated to ensure that the tool provides accurate readings when testing the engine rod bearing wear. The calibration and BCT measuring point maintenance is included in this bulletin.

to address a no-start or hard start with poor running condition after engine replacement under PI1802Y/Z or PI1803Y/Z. Some replacement long blocks may come with pre-installed fuel rail, injectors, and injector wiring harness. If the condition is present, it is possible that the injector harness was not installed correctly. The connections may be swapped from cylinder No. 1 and cylinder No. 4, and from cylinder No. 2 and cylinder No. 3.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2021MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2021MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.

to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information related to the Technical Service Bulletin previously published PI1802 titled "Knock Sensor Detection System - ECU Logic Improvement" equipped w/THETA II engine. Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal Range/Performance).

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2021MY vehicles (refer to the tables on pages 8-9 for applicable models and engine), which may exhibit a symptom of excessive oil consumption.

The SST comes pre-calibrated from the supplier however, in some cases, due to variable shop compressor air pressure, the SST may need to be re-calibrated to ensure that the tool provides accurate readings when testing the engine rod bearing wear. The calibration and BCT measuring point maintenance is included in this bulletin.

to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information related to the Technical Service Bulletin previously published PI1802 titled "Knock Sensor Detection System - ECU Logic Improvement" equipped w/THETA II engine. Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal Range/Performance).

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Steering Column Housing, or Worm Gear Assembly. When the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit. On some vehicles when the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly and does not affect the steering effort.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2019MY vehicles (refer to table below for applicable model and engine), which may exhibit a symptom of excessive oil consumption.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Steering Column Housing, or Worm Gear Assembly. When the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

takes pride in providing you with high quality and dependable vehicles. In order to maintain these standards, Kia is extending the New Vehicle Limited Warranty coverage for the door latches, for original and subsequent owners of certain 2017 MY Sportage vehicles, from 5-years/60,000-miles to 10-years/unlimited-miles starting from the date the vehicle was first put into service. Kia has determined that over time and extended use, the door latches may not function properly when the outside handle is pulled. If the door latch is not functioning properly, the door may not open. The door(s) can be opened by pulling the inside handle (provided the rear door child safety locks are not engaged).

is extending the warranty coverage for the door latches, for the original or subsequent owners of certain 2017 MY Sportage vehicles, from 5-years/60,000-miles to 10-years/unlimited-miles starting from the date the vehicle was first put into service. Kia has determined that, over time and extended use, the door latches may not function properly when the outside handle is pulled. If the door latch is not functioning properly, the door may not open. The doors can be opened by pulling any inside handle, provided the rear door child safety locks are not engaged.

is extending the warranty coverage for the door latches, for the original or subsequent owners of certain 2017 MY Sportage vehicles, from 5-years/60,000-miles to 10-years/unlimited-miles starting from the date the vehicle was first put into service. Kia has determined that, over time and extended use, the door latches may not function properly when the outside handle is pulled. If the door latch is not functioning properly, the door may not open. The door(s) can be opened by pulling any inside handle, provided the rear door child safety locks are not engaged.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2019MY vehicles (refer to table below for applicable model and engine), which may exhibit a symptom of excessive oil consumption.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on diagnosing and/or repairing some 2011-2019MY vehicles (refer to table below for applicable model and engine), which may exhibit a symptom of excessive oil consumption.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Worm Gear Assembly or Steering Column Housing on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Worm Gear Assembly or Steering Column Housing on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802 Rev 10, 03/16/2020) titled Knock Sensor Detection System - ECU Logic Improvement equipped w/THETA II engine. Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal Range/Performance).

revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage.

revised to include additional information. - This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802 Rev 10, 03/16/2020) titled "Knock Sensor Detection System - ECU Logic Improvement".

revised to include additional information. This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802 Rev 10, 03/16/2020) titled "Knock Sensor Detection System - ECU Logic Improvement".

been revised to include additional information. This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage.

This Pitstop provides information regarding the updated spark plug for vehicles listed below, equipped with 2.0T Theta-II engines, which may not yet be available in the Electronic Parts Catalog (EPC). If not available, the updated spark plug must be ordered manually. This updated spark plug has been improved with the thread shoulder lengthened to enhance protection of the insulator from combustion heat.

- SUPERSEDED BY PI1802YZ/1803YZ.

to include additional information. This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802 Rev 10, 03/16/2020) titled "Knock Sensor Detection System - ECU Logic Improvement". Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below return to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal Range/Performance).

BY PI1802Y/Z.

revised to include additional information. This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802 Rev 10, 03/16/2020) titled Knock Sensor Detection System - ECU Logic Improvement. Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below return to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal Range/Performance).

bulletin has been revised to include additional information. This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage.

bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage.

to include additional information.This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802, Rev 6, 01/31/2019) titled "Knock Sensor Detection System - ECU Logic Improvement". Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code (DTC), P1326.

is conducting an important Product Improvement Campaign to perform a software update on all 2014-2018 MY Sportage vehicles equipped with 2.4L Gasoline Direct Injection ("GDI") and 2.0L Turbocharged GDI ("T-GDI") engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit ("ECU").

bulletin has been revised to include additional information. This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802, Rev 6, 01/31/2019) titled '"Knock Sensor Detection System - ECU Logic Improvement". Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code ("DTC"), P1326.

the partial repair of the Four Wheel Drive (4WD) Coupling Assembly, Pressure Sensor, Actuator Motor or 4WD harness on some 2011-2020 Sportage (SL, QL) and 2013-2020MY Sorento (XMa, UMa) 4WD vehicles for a concern regarding: Oil leakage from the 4WD coupling assembly 4WD Malfunction and MIL lamp ON with DTCs Abnormal noise or vibration while driving

revised to include additional information.This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU) or Steering Column Housing on some 2010MY~ Kia models listed on page 5 equipped with a Column Motor Driven Power Steering (C-MDPS) unit. Follow the MDPS Flowchart (page 2) along with the MDPS DTC Table (page 3) procedure outlined in this bulletin before replacing the C-MDPS Motor, ECU or Steering Column Housing.

been revised to include additional information. This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage.

has been revised to include additional information.This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU) or Steering Column Housing on some 2010MY~ Kia models listed on page 5 equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage. The KSDS detects vibrations indicating the onset of excessive connecting rod bearing wear. It is designed to alert the driver at an early stage of bearing wear before the occurrence of severe engine damage, including engine failure. If vibrations caused by bearing wear start to occur, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Limp Home Mode. This will reduce further damage to the engine and ensure that the vehicle occupants are not exposed to the risk of a more severe engine failure. At that time, Diagnostic Trouble Code (DTC) P1326, specific to the KSDS, will be recorded in the ECU. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slowly and have a reduced maximum speed. Also, engine RPMs will be limited to approximately 1800-2000 RPM.

This bulletin provides the procedure to inspect the Air Conditioner (A/C) and replace the A/C compressor, Evaporator Temperature Sensor (ETS), and/or External Control Valve (ECV), depending on the inspection results on some 2017-2019MY Sportage (QL) vehicles, produced from December 1, 2015 through July 7, 2017, which may exhibit intermittent poor air conditioning performance.

Conditioner (A/C) and replace the A/C compressor, Evaporator Temperature Sensor (ETS), and/or External Control Valve (ECV), depending on the inspection results on some 2017-2019MY Sportage (QL) vehicles, produced from December 1, 2015 through July 7, 2017, which may exhibit intermittent poor air conditioning performance.

is conducting an important Product Improvement Campaign to perform a software update on all 2014-2018 MY Sportage vehicles equipped with 2.4L Gasoline Direct Injection ("GDI") and 2.0L Turbocharged GDI ("T-GDI") engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit ("ECU").

related to an expanded diagnostic test that is now required on a number of vehicles previously diagnosed with Diagnostic Trouble Code ("DTC") P1326. Using the procedures published in TSB PI1802W/X and PI1803W/X, the subject vehicles were diagnosed and determined to require an engine replacement and are currently being held at dealers pending repair. As a result of additional field data collection and analysis, the initial diagnosis method has been updated to improve test result accuracy. Prior to performing an engine replacement on any of the VINs affected by this Service Action, the engine condition needs to be re-assessed utilizing an updated/expanded diagnostic process.

related to an expanded diagnostic test that is now required on a number of vehicles previously diagnosed with Diagnostic Trouble Code ("DTC") P1326. Using the procedures published in TSB PI1802W/X and PI1803W/X, the subject vehicles were diagnosed and determined to require an engine replacement and are currently being held at dealers pending repair. As a result of additional field data collection and analysis, the initial diagnosis method has been updated to improve test result accuracy. Prior to performing an engine replacement on any of the VINs affected by this Service Action, the engine condition needs to be re-assessed utilizing an updated/expanded diagnostic process.

Service Bulletin previously published in July 2018 (PI1802, Rev 6, 01/31/2019) titled "Knock Sensor Detection System - ECU Logic Improvement". Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code ("DTC"), P1326.

Service Bulletin previously published in July 2018 (PI1802, Rev 6, 01/31/2019) titled "Knock Sensor Detection System - ECU Logic Improvement". Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code ("DTC"), P1326.

to include additional information This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802, Rev 6, 01/31/2019) titled ?Knock Sensor Detection System - ECU Logic Improvement?. Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code (?DTC?), P1326..

to include additional information. This bulletin provides information related to the Technical Service Bulletin previously published in July 2018 (PI1802, Rev 5, 12/20/2018) titled ?Knock Sensor Detection System - ECU Logic Improvement?. Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below returns to the dealer with Diagnostic Trouble Code (?DTC?), P1326.

revised to include additional information.This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage.

This bulletin provides information relating to all Kia vehicles equipped with Gasoline Direct Injection (GDI) engines. In these engines highly pressurized gasoline is injected via a common fuel rail and injectors that deliver fuel directly into the combustion chamber of each cylinder. In comparison, in a conventional Multi-Point Fuel Injection (MPI) engine, the gasoline is injected into the intake port of each cylinder at a relatively low pressure. Due to high fuel pressure in a GDI system, servicing the GDI system requires special attention and handling procedures. This bulletin provides special service information and specifications for the GDI fuel system components.

is conducting an important Product Improvement Campaign to perform a software update on all 2016-2018 MY Sportage vehicles equipped with 2.4L Gasoline Direct Injection (?GDI?) and 2.0L Turbocharged GDI (?T-GDI?) engines to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit (?ECU?).

This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage.

This bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS) in order to protect the engine from excessive connecting rod bearing damage

addressing a concern related to P0449 (Evaporative Emission System ? Vent Valve / Solenoid Circuit) or P2422 (Evaporative Emission System Vent Valve Stuck Closed) on 2017MY~ Sportage (QL) model vehicles, and the Canister Closed Valve (CCV) and corresponding circuit were found to be within specifications, it may be necessary to inspect for flow restrictions within the EVAP ventilation system. If a foreign object is found anywhere from the filler neck to the main charcoal canister, such as a spider nest (A), the object will need to be removed with a pipe cleaner. Trying to clear the hose with compressed air has proven to be ineffective and should not be done. The most common area of spider nest presence is located at the filler neck. Fuel Tank

update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage.

to perform a software update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage.

software update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage.

This bulletin provides information regarding the inspection and/or replacement of the E-CVVT cover or O-ring and replacement of the motor plug on some 2016-2017MY Optima (JF, JFa), 2016-2017MY Sorento (UMa), and 2017MY Sportage (QL) vehicles, equipped with 2.4L GDI or 2.0T-GDI, which may exhibit a malfunction indicator light (MIL) ON with DTC P001000 and/or oil leakage in the E-CVVT motor plug of applicable vehicles.

to a single faint ?thud? type noise heard from the engine compartment at speeds of 18-20 MPH after initial start-up. Be aware that the Electronic Stability Control (ESC) system performs it?s self-check under these conditions. This single faint ?thud? type noise is normal and indicates that the ESC is functioning properly.

considered serviceable, and should be thoroughly cleaned and transferred to the new engine.

This bulletin provides information regarding the inspection and/or replacement of the E-CVVT cover or O-ring and replacement of the motor plug on some 2016-2017MY Optima (JF, JFa), 2016-2017MY Sorento (UMa), and 2017MY Sportage (QL) vehicles, equipped with 2.4L GDI or 2.0T-GDI, which may exhibit a malfunction indicator light (MIL) ON with DTC P001000 and/or oil leakage in the E-CVVT motor plug of applicable vehicles.

regarding data transfer of automatic transmission (A/T) characteristic values on 2015MY-2018MY K900 (KH) vehicles equipped with A8TR1 8-speed A/T and 2017MY~ Sportage (QL), Forte (YDm), and Cadenza (YG) vehicles equipped with the GEN2 Type (A6MF2-2 6-speed / A8LF1 8-speed) A/T. The type of solenoid valve used to control gear shifts changed from indirect to direct control type to reduce oil capacity and improve fuel efficiency.

System - Vent Valve / Solenoid Circuit) on 2017-2018MY Sportage (QL) model vehicles, and the Canister Closed Valve (CCV) and corresponding circuit were found to be within specifications, it may be necessary to inspect for flow restrictions within the EVAP ventilation system.

procedure to replace the Evaporator Temperature Sensor and /or ECV (External Control Valve) on 2017-2018MY Sportage (QL) vehicles produced from December 1, 2015 through July 18, 2017, which may exhibit intermittent poor air conditioning performance.

information regarding the inspection and/or replacement of the E-CVVT cover or O-ring and replacement of the motor plug on some 2016-2017MY Optima (JF, JFa), 2016-2017MY Sorento (UMa), and 2017MY Sportage (QL) vehicles, equipped with 2.4L GDI or 2.0T-GDI, which may exhibit a malfunction indicator light (MIL) ON with DTC P001000 and/or oil leakage in the E-CVVT motor plug of applicable vehicles.

regarding the inspection and/or replacement of the E-CVVT cover or O-ring and replacement of the motor plug on some 2016-2017MY Optima (JF, JFa), 2016-2017MY Sorento (UMa), and 2017MY Sportage (QL) vehicles, equipped with 2.4L GDI or 2.0T-GDI, which may exhibit a malfunction indicator light (MIL) ON with DTC P001000 and/or oil leakage in the E-CVVT motor plug of applicable vehicles.

related to extracting ?in use performance tracking? emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California.

extracting ?in use performance tracking? emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting. To facilitate collection of this data at the dealer level, KDS screenshots will allow the capture of relevant parameters.

and motor plug on some 2016MY Optima (JF/JFa), produced from August 29, 2015 to June 14, 2016, 2017MY Sportage (QL) vehicles, produced from December 10, 2015 to June 15, 2016, and 2016-2017MY Sorento (UMa), produced from October 27, 2014 to June 14, 2016, which may exhibit a MIL ON with DTC P001000 and/or oil leakage in the E-CVVT motor plug of applicable vehicle models equipped with 2.4L GDI or 2.0 T-GDI engines.

SHARDS HAVE CONTAMINATED THE SYSTEM, THE DESICCANT OR THE ENTIRE A/C RECEIVER/DRYER ASSEMBLY MAY NEED TO BE REPLACED. THIS IS DUE TO THE FACT THAT IT MAY BE IMPOSSIBLE TO REMOVE ALL METAL CONTAMINANTS FROM THE RECEIVER/DRYER DURING THE A/C FLUSHING PROCEDURE. REFER TO THE INCLUDED TABLE FOR DETAILED INFORMATION ON COMPONENT REPLACEMENT BY MODEL. IF YOU SUSPECT A PLUGGED EXPANSION VALVE, THE INLET SCREENS CAN BE CLEANED. IF THE VALVE IS NOT EQUIPPED WITH AN INLET SCREEN AND IS RESTRICTED, THE EXPANSION VALVE MAY ALSO NEED TO BE REPLACED.

AND MOTOR PLUG ON SOME 2016MY SORENTO (UMA), PRODUCED FROM OCTOBER 27, 2014 TO JUNE 14, 2016, 2016MY OPTIMA (JF/JFA), PRODUCED FROM AUGUST 29, 2015 TO JUNE 14, 2016, AND 2017MY SPORTAGE (QL) VEHICLES, PRODUCED FROM DECEMBER 10, 2015 TO JUNE 15, 2016, WHICH MAY EXHIBIT A MIL ON WITH DTC P001000 AND/OR OIL LEAKAGE IN THE E-CVVT MOTOR PLUG OF APPLICABLE VEHICLE MODELS EQUIPPED WITH 2.4L GDI OR 2.0 T-GDI ENGINES. FOLLOW THE PROCEDURE OUTLINED IN THIS BULLETIN TO REPLACE THE E-CVVT COVER AND MOTOR PLUG TO CORRECT THE CONCERN.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on some 2011-2016MY Sportage (SL) vehicles produced from May 6, 2010 through Nov 16, 2015, and 2017-2022MY Sportage (QL) vehicles produced from December 10, 2015 through December 7, 2021, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked with the use of the key fob.

COMPATIBILITY (CS2310) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software logic in the Kia Genuine Remote Start Control Module on certain 2012-2022MY model vehicles listed on page 7. Vehicles equipped with a Kia Genuine Remote Start feature and have had the Anti-Theft software logic (CS230*) applied to the Integrated Body Control Unit (IBU) or Body Control Module (BCM) may experience five (5) inadvertent honks after starting the vehicle with the remote start feature.

developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of the original letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to the vehicle to discourage a break-in.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on some 2011-2016MY Sportage (SL) vehicles produced from May 6, 2010 through Nov 16, 2015, and 2017-2022MY Sportage (QL) vehicles produced from Dec 10, 2015 through Dec 7, 2021, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.

COMPATIBILITY (CS2310) - This bulletin provides information to update the software logic in the Kia Genuine Remote Start Control Module on certain 2012-2022MY model vehicles listed on page 6. Vehicles equipped with a Kia Genuine Remote Start feature and have had the Anti-Theft software logic (CS230*) applied to the Integrated Body Control Unit (IBU) or Body Control Module (BCM) may experience five (5) inadvertent honks after starting the vehicle with the remote start feature.

New/revised sections of this pitstop are indicated by a black bar in the margin area. This Pitstop provides information regarding a possible mismatch of a SRSCM (Supplemental Restraint System Control Module) and driver seat belt buckle that may set the SRS DTC(s) B168400 and/or B176200 on the models listed below. When diagnosing a vehicle that has been in an accident and/or has recently had a superseded SRSCM replaced, it may be necessary to inspect and replace the driver seat belt buckle with the latest production P/N listed in EPC. Older production driver seat belt buckles have a 4 pin connector and may no longer be compatible with the superseded SRSCM. Only the SRSCM is superseded; the driver seat belt buckle is not superseded.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on some 2011-2016MY Sportage (SL) vehicles produced from May 6, 2010 through Nov 16, 2015, and 2017-2022MY Sportage (QL) vehicles produced from Dec 10, 2015 through Dec 7, 2021, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on some 2011-2016MY Sportage (SL) vehicles produced from May 6, 2010 through Nov 16, 2015, and 2017-2022MY Sportage (QL) vehicles produced from Dec 10, 2015 through Dec 7, 2021, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation.

developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of this letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to your vehicle to discourage a break-in.

developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of this letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to your vehicle to discourage a break-in.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on some 2011-2016MY Sportage (SL) vehicles produced from May 6, 2010 through Nov 16, 2015, and 2017-2022MY Sportage (QL) vehicles produced from Dec 10, 2015 through Dec 7, 2021, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation.

bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on some 2011-2016MY Sportage (SL) vehicles produced from May 6, 2010 through Nov 16, 2015, and 2017-2022MY Sportage (QL) vehicles produced from Dec 10, 2015 through Dec 7, 2021, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation.

alignment on 2014MY and later vehicles that may exhibit a warning light ON related to radar sensor alignment errors in the Forward Collision-Avoidance Assist (FCA)/Smart Cruise Control (SCC) system.

(Supplemental Restraint System Control Module) and driver seat belt buckle that may set the SRS DTC(s) B168400 and/or B176200 on the models listed below. When diagnosing a vehicle that has been in an accident and/or has recently had a superseded SRSCM replaced, it may be necessary to inspect and replace the driver seat belt buckle with the latest production P/N listed in EPC. Older production driver seat belt buckles have a 4 pin connector and may no longer be compatible with the superseded SRSCM. Only the SRSCM is superseded; the driver seat belt buckle is not superseded. DTC B176200:

2017-2018MY Sportage (QL) 2.0T and 2016-2018MY Sorento (UMa) 2.0T vehicles, which may not yet be available in the Electronic Parts Catalog (EPC). If not available, the updated spark plug must be ordered manually.

The TPMS positioning from the manufacturer may be different from the positioning shown on a KDS.

BCM (Body Control Module) software upgrade on 2017MY Sportage (QL) vehicles to improve the fuel door open logic. To install the upgraded logic, the BCM should be reprogrammed using the GDS/KDS download.

the repositioning of the front power seat back board strap for 2017MY Sportage (QL) vehicles produced from December 10, 2015 through October 10, 2016 due to interference between the side air bag harness and front seat back board strap. This interference may cause a noise when moving the front seat forward/backward and up/down.

PRODUCED FROM DECEMBER 10, 2015 THROUGH FEBRUARY 15, 2016, AND EQUIPPED WITH AUTO (FATC) OR MANUAL HVAC CONTROLS. THE ECU UPGRADE PROVIDES AN IMPROVED HEATING STRATEGY DURING FLOOR MODE OPERATION. TO INSTALL THE UPGRADED LOGIC, THE ECU SHOULD BE REPROGRAMMED USING THE GDS/KDS DOWNLOAD AS DESCRIBED IN THIS BULLETIN.

SOME VEHICLES EQUIPPED WITH BLIND SPOT DETECTION (BSD), WHICH MAY EXHIBIT A CHECK BSD SYSTEM MESSAGE WITH DTCS: C270254 AND C270354: C270254: CONTROL MODULE MASTER MISSING CALIBRATION / C270354: CONTROL MODULE SLAVE MISSING CALIBRATION

CONTROLLER SOFTWARE UPGRADE FOR 2017MY SPORTAGE (QL) VEHICLES, PRODUCED FROM DECEMBER 10, 2015 THROUGH FEBRUARY 15, 2016, AND EQUIPPED WITH AUTO (FATC) OR MANUAL HVAC CONTROLS. THE ECU UPGRADE PROVIDES AN IMPROVED HEATING STRATEGY DURING FLOOR MODE OPERATION. TO INSTALL THE UPGRADED LOGIC, THE ECU SHOULD BE REPROGRAMMED USING THE GDS/KDS DOWNLOAD, AS DESCRIBED IN THIS BULLETIN. KIA IS REQUESTING THE COMPLETION OF THIS SERVICE ACTION ON ALL AFFECTED VEHICLES. FOR CONFIRMATION THAT THE LATEST REFLASH HAS BEEN DONE TO A VEHICLE YOU ARE WORKING ON, VERIFY ROM ID USING THE TABLES IN THIS TSB.

CONTROLLER SOFTWARE UPGRADE FOR 2017MY SPORTAGE (QL) VEHICLES, PRODUCED FROM DECEMBER 10, 2015 THROUGH JUNE 22, 2016, AND EQUIPPED WITH AUTO (FATC) OR MANUAL HVAC CONTROLS. THE ECU UPGRADE PROVIDES AN IMPROVED COOLING STRATEGY TO PREVENT EVAPORATOR ICING UNDER SPECIFIC DRIVING AND AMBIENT TEMPERATURE AND/OR HUMIDITY CONDITIONS. TO INSTALL THE UPGRADED LOGIC, THE ECU SHOULD BE REPROGRAMMED USING THE GDS/KDS DOWNLOAD, AS DESCRIBED IN THIS BULLETIN. KIA IS REQUESTING THE COMPLETION OF THIS SERVICE ACTION ON ALL AFFECTED VEHICLES. FOR CONFIRMATION THAT THE LATEST REFLASH HAS BEEN DONE TO A VEHICLE YOU ARE WORKING ON, VERIFY ROM ID USING THE TABLES IN THIS TSB.

Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a Warning Lamp to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission.

A flush is required ONLY when a transmission is replaced.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP), and some 2016-2017MY Optima (JF) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the concerns listed below. These concerns may be due to the inhibitor switch not allowing the correct gear position signal to be sent to various control units.

with the All-Wheel-Drive (AWD) system due to tire sizes of differing circumference. Some customers may complain of a chatter sensation felt in the drivetrain of the vehicle and/or the failure of drivetrain component(s). A difference in tire size (width, aspect ratio, construction, rim diameter etc.) may be the cause.

include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP), and some 2016-2017MY Optima (JF) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the concerns listed below. These concerns may be due to the inhibitor switch not allowing the correct gear position signal to be sent to various control units.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP), and some 2016-2017MY Optima (JF) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the concerns listed below. These concerns may be due to the inhibitor switch not allowing the correct gear position signal to be sent to various control units.

correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles in the chart starting on page 2.

procedure to replace the window regulator drum/gear on some 2017 MY Sportage (QL) vehicles, produced from December 15, 2015 through May 31, 2016, which may exhibit an inoperative front (left and/or right side) window regulator concern due to a drum gear separating and/or breaking.

This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP), and some 2016-2017MY Optima (JF) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the concerns listed in this bulletin. These concerns may be due to the inhibitor switch not allowing the correct gear position signal to be sent to various control units.

Transmission Control Unit (TCU) on some 2017-2018MY Sportage (QL) 2.4L vehicles, produced from December 10, 2015 through April 5, 2018, which may experience an intermittent shift flare concern.

- This bulletin provides the procedure to replace the inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP), and some 2016-2017MY Optima (JF) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the following concerns: ? Malfunction Indicator Lamp (MIL) ON with DTC P0705 - Transmission Range Sensor (TRS) Circuit Malfunction (active or history) ? CAN-related DTCs (For both Hybrids: CAN DTC C2243); ? Intermittent no crank/no start ? Erratic or harsh shifting; ? EPB and Hold lights illuminated intermittently; ? ?Key OFF? indicated after placing the selector lever into the ?P? position and depressing the Start/Stop button.Note: When this condition occurs, the ?P? position is not indicated on the instrument cluster.

This bulletin provides information regarding axle shaft serviceability for Kia vehicles equipped with a six-speed automatic transmission.

inhibitor switch on some 2017MY Optima (JFa), Sorento (UMa), Optima Hybrid (HEV), Optima Plug-in Hybrid (PHEV), Sportage (QL), Forte (YD), and Sedona (YP) vehicles, equipped with a front wheel drive 6-speed transmission, which may experience the concerns listed below. These concerns may be due to the inhibitor switch not allowing the correct gear position signal to be sent to various control units.

the TCU (Transmission Control Unit) software upgrade of some 2017MY Sportage (QL) 2.0T-GDI/2.4GDI vehicles produced from December 10, 2015 through October 27, 2016 to improve the gear shift and acceleration performance logic.

information in regards to: ANDROID AUTO will not launch when a Samsung Android phone is connected to the vehicle. UVO eServices setup fails and the head unit displays a smartphone connection error.

Apple CarPlay and Android Auto on vehicles equipped with Premium Navigation (AVN 4.0) or UVO eServices (UVO 3.0) systems.

operation of Multi-Function Camera (MFC) on some Kia vehicles. When normal operation is not possible due to certain outside environment conditions (such as sunlight glare, heavy rain, sunlight, snow, fog and/or substance/debris) causing a temporary concern. This stops operation causing Warning Lamp ON and/or Pop-up Message displayed on the cluster. This is a normal operation of the ADAS and once environment conditions improve and/or substance/debris are removed, the system will clear itself and operate normally.

the clock on UVO eServices (UVO 3.0) head units installed on 2017-2018MY vehicles.

the following customer concern occurs on a 2017MY Sportage (QL) with Base Audio (Audio 3.0 B): * ?When turning on the vehicle, the car radio shows broken characters and symbols near the station numbers?. * ?Intermittently at start up, the screen will display unidentifiable symbols.?

diagnose and repair 2017-18MY Sportage (QL) and 2017MY Niro (DE HEV) vehicles, with UVO eServices (UVO 3.0) head units, produced after June 15, 2017, with Bluetooth sound quality customer concerns.

especially when the vehicle drives over bumps. This condition can be caused by loose connections at the base of the antenna and/or at the antenna cable connector located at the right front A pillar.

REGARDS TO:ANDROID AUTO WILL NOT LAUNCH WHEN A SAMSUNG ANDROID PHONE IS CONNECTED TO THE VEHICLE. UVO ESERVICES SETUP FAILS AND THE HEAD UNIT DISPLAYS A SMARTPHONE CONNECTION ERROR.

AUDIO SYSTEM SOFTWARE TO INCLUDE ANDROID AUTO AND APPLE CARPLAY SOFTWARE.

ESPECIALLY WHEN THE VEHICLE DRIVES OVER BUMPS. THIS CONDITION CAN BE CAUSED BY LOOSE CONNECTIONS AT THE BASE OF THE ANTENNA. FOLLOW THE PROCEDURE OUTLINED BELOW TO RESOLVE THE CONCERN.

CARPLAY AND ANDROID AUTO ON 2017MY SORENTO (UMA) AND THE LAUNCH OF APPLE CARPLAY ON 2016MY OPTIMA (JFA) AND 2017MY SPORTAGE (QL) VEHICLES, EQUIPPED WITH PREMIUM NAVIGATION (AVN 4.0) OR UVO ESERVICES (UVO 3.0) SYSTEMS.

CARPLAY AND ANDROID AUTO ON VEHICLES EQUIPPED WITH PREMIUM NAVIGATION (AVN 4.0) OR UVO ESERVICES (UVO 3.0) SYSTEMS.

vehicles equipped with Autonomous Emergency Brake (AEB), the front license plate bracket is installed in one of two different positions, depending on whether the vehicle is equipped with 2WD or All-Wheel-Drive (AWD). Follow the instructions in this bulletin to ensure that the AEB system is not being impaired by an incorrect license plate installation.

substance found on some Kia vehicles, due to possible excess assembly oil applied during assembly.

revised to include additional information. This Pitstop provides information regarding the installation of the front license plate bracket on 2017MY~ Sportage (QL) and 2019MY~ Sorento (UMa) vehicles equipped with Autonomous Emergency Braking (AEB) / Forward Collision Avoidance Assist (FCA).

revised to include additional information. This Pitstop provides information regarding the installation of the front license plate bracket on 2017MY~ Sportage (QL) and 2019MY~ Sorento (UMa) vehicles equipped with Autonomous Emergency Braking (AEB) / Forward Collision Avoidance Assist (FCA).

provides the procedure to inspect and/or replace the Hydraulic Electronic Control Unit (HECU) module mounting bolts or replace the HECU assembly depending on the inspection results on some 2017MY Sportage (QL) vehicles, produced from October 29, 2016 through November 21, 2016, and on some 2017MY Cadenza (YG) vehicles, produced from October 29, 2016 through December 2, 2016, which may exhibit damaged module mounting bolt heads. Vehicles within the production date range listed above may exhibit an illumination of the ABS/ESC warning lamp.

This bulletin has been revised to include additional information. On 2017MY~ Sportage (QL) vehicles equipped with Autonomous Emergency Brake (AEB), the front license plate bracket is installed in one of two different positions, depending on whether the vehicle is equipped with 2-Wheel-Drive (2WD) or All-Wheel-Drive (AWD). Follow the instructions in this publication to ensure that the AEB system is not being impaired by an incorrect license plate installation!

information for applying soundproof padding to the Delta Garnish on 2017MY Sportage (QL) vehicles produced from December 10, 2015 through October 14, 2016, and to inspect the front bumper and, if necessary, apply soundproof padding on some 2017MY Sportage (QL) vehicles produced from July 8, 2016 through August 30, 2016. Kia is requesting the completion of this Service Action on all affected vehicles in dealer stock, prior to delivery. Before conducting the procedure, verify the vehicle is included in the list of affected VINs.

once fully attached, are utilized in various Kia models and are strictly intended for ?one time use.? Some examples are: axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners with pre-applied ?thread-locking adhesives.? It is critical for technicians to be aware that ALL such locking fasteners, regardless of type, are for ?one time use? only.

strictly intended for ?one time use?. Though not limited to the following, some examples are: axle shaft nuts with stake collar, cotter pins, washers with locking tabs and other similar hardware, including threaded fasteners with pre-applied ?thread-locking adhesives.?

information for applying soundproof padding to the Delta Garnish on 2017MY Sportage (QL) vehicles produced from December 10, 2015 through October 14, 2016, and to inspect the front bumper and, if necessary, apply soundproof padding on some 2017MY Sportage (QL) vehicles produced from July 8, 2016 through August 30, 2016. Kia is requesting the completion of this Service Action on all affected vehicles in dealer stock, prior to delivery. Before conducting the procedure, verify the vehicle is included in the list of affected VINs.

with Autonomous Emergency Braking (AEB). Some customers may have interest and/or questions regarding this new technology, including what type of feedback they can expect from this system. The information provided below is a brief reference. The service information found on KGIS including the Owner?s Manual will provide more detailed information.

EQUIPPED WITH AUTONOMOUS EMERGENCY BRAKE (AEB), THE FRONT LICENSE PLATE BRACKET IS INSTALLED IN ONE OF TWO DIFFERENT POSITIONS, DEPENDING ON WHETHER THE VEHICLE IS EQUIPPED WITH 2WD OR ALL-WHEEL-DRIVE (AWD). FOLLOW THE INSTRUCTIONS IN THIS BULLETIN TO ENSURE THAT THE AEB SYSTEM IS NOT BEING IMPAIRED BY AN INCORRECT LICENSE PLATE INSTALLATION.

regarding blocked windshield wiper nozzles on some 2016MY~ Sorento (UMa) and 2017MY~ Sportage (QL) vehicles equipped with windshield washer heaters (A). Mixing tap water (?) and concentrated windshield washer fluid can cause corrosion of the heater element due to the mineral content of tap water.

concern on 2017-2019MY Sportage (QL) and 2015-2018MY K900 (KH) vehicles that may have a seized compressor. To confirm the diagnosis of a seized A/C compressor, visually inspect for a paint mark (A) against the limiter in the center of the compressor. If the mark is no longer aligned (B), an internal disconnection of the limiter has occurred and the compressor assembly needs to be replaced.

Refer to TSB CLI041/SA309.

Refer to TSB CLI041/SA309.

and all Kia vehicles, after and including 2017MY, incorporate an anti-condensation logic to prevent the interior windows from becoming excessively fogged. The HVAC control head in these vehicles monitors ambient temperature to determine which settings will best prevent the windows from fogging. If the system detects lower ambient temperature (about 60F or below), the anti-condensation logic may automatically set the air intake mode to FRESH, depending on the other HVAC settings. The anti-condensation logic is also designed to ensure that air intake mode is set to FRESH, as long as all conditions are met. If the user changes the air intake to RECIRCULATION, the anti-condensation logic will take control again after 5 minutes, and change the air intake mode back to FRESH. If this results in an undesired operation, the logic may be enabled or disabled by following the procedure below.

incorporate a defogging logic to prevent the interior windows from becoming excessively fogged. Depending on the specific model, the HVAC control head monitors ambient temperature and/or cabin humidity to determine which settings will best prevent the windows from fogging. If the system detects lower ambient temperature or higher cabin humidity, the defogging logic may automatically switch ON the A/C, and/or set the air intake mode to Fresh Air. If the user changes these settings, the defogging logic will take control again after 3 to 5 minutes, depending on the procedure in this publication.

recycling, and recharging equipment. This equipment is designed to meet SAE J2843 requirements for servicing vehicles containing R1234yf refrigerant.

R1234YF A/C SYSTEMS OIL AND DYE INJECTOR KITS ARE AVAILABLE THROUGH SNAP-ON BUSINESS SOLUTIONS.

RECOVERY EQUIPMENT, CAN AID IN LOCATING R1234YF REFRIGERANT LEAKS.

RECYCLING, AND RECHARGING EQUIPMENT. THIS EQUIPMENT IS DESIGNED TO MEET SAE J2843 REQUIREMENTS FOR SERVICING VEHICLES CONTAINING R1234YF REFRIGERANT.

RELEASED WITH THE 2017MY SPORTAGE (QL), AND APPLICABLE TO FUTURE MODELS. GOVERNMENTAL STANDARDS TO REDUCE THE LENGTH OF TIME REFRIGERANTS CAN LINGER IN THE UPPER ATMOSPHERE HAVE RESULTED IN AN ADOPTION OF R1234YF, AS A REPLACEMENT FOR R134A.

containing the most frequently asked questions regarding the Voluntary Emissions Service Campaign SC340.

satellite radio service in regards to the following customer concerns: Sirius XM Data will not load; Head unit display shows "No Information Received" when Weather, Fuel Prices, Sports, Stocks, or Movies is selected. The concerns above may happen when the communication between the Sirius XM Satellite and the head unit is not initializing correctly. To correct this concern, a "signal refresh" is required. Please see the bulletin for information on how to perform a signal refresh.

certain 2017MY Sportage (QL) vehicles, produced between December 10, 2015 and December 12, 2016, which may exhibit poor A/C performance due to a refrigerant leak caused by a defective tube weld at the A/C evaporator core.

illuminated with DTC(s) P0442, P0455, P0456, or P0457 (Evaporative Emissions System-Leak detected) and the evaporative (EVAP) leak self-test resulted in NTF, a manual EVAP test is recommended.

models such as K900 (KH), Sedona (YP), Sorento (UMa), Optima (JFa), Sportage (QL), and 17MY Forte (YD, YDm), etc., equipped with a sunroof, a ventilation logic has been applied in order to prevent exhaust gases flowing into the vehicle due to the pressure difference (inside vs outside) that is generated when driving with the sunroof open. This logic allows the system to automatically switch from RECIRCULATION to FRESH mode when the sunroof is open.

SATELLITE RADIO SERVICE IN REGARDS TO THE FOLLOWING CUSTOMER CONCERNS: SIRIUS XM DATA WILL NOT LOAD; HEAD UNIT DISPLAY SHOWS "NO INFORMATION RECEIVED" WHEN WEATHER, FUEL PRICES, SPORTS, STOCKS, OR MOVIES IS SELECTED. THE CONCERNS ABOVE MAY HAPPEN WHEN THE COMMUNICATION BETWEEN THE SIRIUS XM SATELLITE AND THE HEAD UNIT IS NOT INITIALIZING CORRECTLY. TO CORRECT THIS CONCERN, A "SIGNAL REFRESH" IS REQUIRED. PLEASE SEE THE BULLETIN FOR INFORMATION ON HOW TO PERFORM A SIGNAL REFRESH.

associated with the "Warranty Extension Program" (WTY027) to inspect and, if necessary, replace the Airbag Control Unit (ACU) with a new one on 2017MY Cadenza (YG) produced from June 2, 2016 through July 12, 2017 and Sportage (QL) vehicles produced from December 10, 2015 through April 11, 2017. If these vehicles exhibit an MIL "ON" and one or more of the DTCs listed in the table below are stored, the ACU is to be replaced. Follow the procedure outlined in this publication for the inspection of DTCs and ACU replacement.

Vehicle Limited Warranty coverage for repairs related to the illumination of the Airbag Warning Light in 2017 MY Sportage vehicles from 5 years/60,000 miles to 15 years/unlimited miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address certain Airbag Warning Light ON conditions at no cost to you.

Service Managers that Kia is extending the New Vehicle Limited Warranty coverage for the repairs related to the Airbag Warning Light ON for 2017 MY Sportage and 2017 MY Cadenza vehicles from 5 years/60,000 miles to 15 years/unlimited miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address certain Airbag Warning Light ON conditions.

extending the New Vehicle Limited Warranty coverage for the repairs related to the Airbag Warning Light ON for 2017 MY Sportage and 2017 MY Cadenza vehicles from 5 years/60,000 miles to 15 years/unlimited miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address certain Airbag Warning Light ON conditions.

inoperative cluster speaker on 2017-2018MY Sportage (QL). Customer concern may include inaudible turn signals and no seat belt and key/key fob warning chimes.

inoperative cluster speaker on 2017-2018MY Sportage (QL). Customer concern may include inaudible turn signals and no seat belt and key/key fob warning chimes.

information to improve the operation of the panoramic sunroof on some 2017-2022MY Sportage (QL) vehicles, produced from December 10, 2015 through December 7, 2021, which may exhibit slow, noisy, or inoperative sunroof operation caused by dust or dirt intrusion into the sunroof track mechanism. Vehicles driven in dusty environments with a high concentration of sand or dirt in the air, may accumulate debris into the sunroof mechanism causing friction.

Front and/or Rear Door Latches associated with the Warranty Extension Program (WTY020) on some 2017MY Sportage (QL) vehicles produced from December 10, 2015 through December 15, 2016. Over time and extended use, the door latches may not function properly, and the doors may not open when the outside handle is pulled. (The doors can be opened by pulling any inside handle, provided the rear door child safety locks are not engaged.)

replace the door latches on certain Sportage (QL) vehicles, produced from December 10, 2015 through March 11, 2016, which may exhibit an intermittent illumination of the door ajar warning lamp.

noise heard from the rear of the vehicle when closing a door or trunk on some 2016MY-2018MY vehicles.

CERTAIN SPORTAGE (QL) VEHICLES, PRODUCED FROM DECEMBER 10, 2015 THROUGH MARCH 11, 2016, WHICH MAY EXHIBIT AN INTERMITTENT ILLUMINATION OF THE DOOR AJAR WARNING LAMP.

REAR DOOR FRAME MOLDING ON CERTAIN SPORTAGE (QL) SX TRIM LEVEL VEHICLES PRODUCED FROM DECEMBER 24, 2015 THROUGH JANUARY 26, 2016, DUE TO THE POSSIBILITY OF MOLDING SEPARATION.

New/revised sections of this bulletin are indicated by a black bar in the margin area.This bulletin provides information on setting the "Service Interval Reminder" feature available on most 2014-2023MY Kia vehicles (refer to model list on page 2). If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance. Refer to TSB ENG241 for 2023MY~ vehicles equipped with the Oil Life Management System (OLMS) feature not included in table on page 2.

asked questions regarding the warranty extension (WTY027).

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles listed below. Due to an internal control chip concern inside the camera, the vehicle may exhibit an MIL on with DTC C160449 and/or C160649.

asked questions regarding the warranty extension (WTY020).

Interval Reminder" feature available on most Kia vehicles. If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance.

which was mailed with the customer letter advising them to submit the form if they had paid for repairs for this same matter prior to the warranty extension program launch.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles. Due to an internal control chip concern inside the camera, the vehicle may exhibit a Forward Collision Avoidance Assist Warning Lamp (A) and/or Master Warning Lamp (B) with C160449 and/or C160649 codes. Certain systems may become temporarily disabled during occurrences: Smart Cruise Control (SCC), Lane Keep Assistance (LKA), Lane Departure Warning (LDW), Forward Collision-Avoidance Assist (FCA), Forward Collision Warning (FCW) and/or Driver Attention Warning (DAW).

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information on the inspection and replacement of the front camera on some vehicles. Due to an internal control chip concern inside the camera, the vehicle may exhibit a Forward Collision Avoidance Assist Warning Lamp (A) and/or Master Warning Lamp (B) with C160449 and/or C160649 codes. Certain systems may become temporarily disabled during occurrences: Smart Cruise Control (SCC), Lane Keep Assistance (LKA), Lane Departure Warning (LDW), Forward Collision-Avoidance Assist (FCA), Forward Collision Warning (FCW) and/or Driver Attention Warning (DAW).

letter advising them to submit the form if they had paid for repairs for this same matter prior to the warranty extension program launch.

regarding the procedure to repair the bulb connector on some 2010MY~ vehicles listed on the table below, which may exhibit a bulb connector concern. To correct this concern, replace the connector with a new and improved part.

you last August and again last October to provide you with updates regarding news reports about non-collision fires in Kia vehicles and the status of Kia?s cooperative work with NHTSA.