2019 Kia Sedona TSBs

(CS2312) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 20, which may not have been equipped with an immobilizer and whole Integrated Body control Unit (IBU) / Body Control Module (BCM) did receive the Ant-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.

is conducting Customer Satisfaction Campaign. A software upgrade that addresses the social media theft method has been made available to owners of eligible Kia model vehicles free of charge at authorized Kia dealers since 2023. In addition to the anti-theft software, a new zinc-reinforced ignition cylinder protector hardware upgrade has been developed and can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because the subject Kia vehicles were not factory-equipped with an engine immobilizer and were previously eligible for the software upgrade, these vehicles are eligible until March 31, 2027, to have the ignition cylinder protector installedif requestedat no cost through an authorized Kia dealership. (Mailing of these notifications to vehicle owners will be completed from December 17, 2025 through February 27, 2026)

(CS2312) - This bulletin provides information to install a Theft Deterrent Ignition Cylinder Protector on certain 2010-2022MY Kia vehicles outlined on page 19, which may not have been equipped with an immobilizer and whose Integrated Body Control Unit (IBU) / Body Control Module (BCM) did receive the Anti-Theft Software Logic upgrade under CS2301/02/03/04/05/06/07/08/09 TSBs. In an effort to help prevent thefts of Kia vehicles, a protective cover will be permanently affixed to the ignition cylinder. This Theft Deterrent Ignition Cylinder Protector prevents the removal of the key lock cylinder thereby preventing access to the ignition tumbler.

has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY034) to diagnose the Malfunction Indicator Lamp (MIL) accompanied by DTC P0088 and, if necessary, replace the high-pressure fuel pump on 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020, 2017-2020 MY Cadenza vehicles manufactured from June 2, 2016 through October 15, 2020, and 2019-2020 MY Sorento vehicles equipped with 3.3L V6 Engines manufactured from January 24, 2018 through October 26, 2020.

has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY034) to diagnose the Malfunction Indicator Lamp (MIL) accompanied by DTC P0088 and, if necessary, replace the high-pressure fuel pump on 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020, 2017-2020 MY Cadenza vehicles manufactured from June 2, 2016 through October 15, 2020, and 2019-2020 MY Sorento vehicles equipped with 3.3L V6 Engines manufactured from January 24, 2018 through October 15, 2020.

provides information associated with the Warranty Extension Program (WTY034) to diagnose the Malfunction Indicator Lamp (MIL) accompanied by DTC P0088 and, if necessary, replace the high-pressure fuel pump on 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020, 2017-2020 MY Cadenza vehicles manufactured from June 2, 2016 through October 15, 2020, and 2019-2020 MY Sorento vehicles equipped with 3.3L V6 Engines manufactured from January 24, 2018 through October 15, 2020.

dealer Parts and Service Managers that Kia is extending the New Vehicle Limited Warranty coverage, to all owners, for repairs related to the high-pressure fuel pump for eligible vehicles from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address the high-pressure fuel pump condition on 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020, 2017-2020 MY Cadenza vehicles manufactured from June 2, 2016 through October 15, 2020, and 2019-2020 MY Sorento vehicles equipped with 3.3L V6 Engines manufactured from January 24, 2018 through October 15, 2020.

that Kia is extending the New Vehicle Limited Warranty coverage, to all owners, for repairs related to the high-pressure fuel pump for eligible vehicles from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address the high-pressure fuel pump condition on the following vehicles: 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020, 2017-2020 MY Cadenza vehicles manufactured from June 2, 2016 through October 15, 2020, and 2019-2020 MY Sorento vehicles equipped with 3.3L V6 Engines manufactured from January 24, 2018 through October 15, 2020.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.

has been revised to include additional information.This bulletin provides the procedure to inspect and, if necessary, replace the oil filler cap on some vehicle models listed below. The engine oil filler cap may contain a misprint of SAE Engine Oil Viscosity Number. Follow the procedure outlined in this bulletin to replace the oil filler cap.

procedure to inspect and, if necessary, replace the oil filler cap on some vehicle models listed below. The engine oil filler cap may contain a misprint of SAE Engine Oil Viscosity Number. Follow the procedure outlined in this bulletin to replace the oil filler cap.

regarding the Voluntary Emissions Service Campaign on the Engine Oil Filler Cap inspection, and if necessary, replacement.

letter to Kia Sedona vehicle owners advising them that Kia is conducting a Voluntary Emissions Service Campaign to inspect the engine oil filler cap and, if necessary, replace the cap on their 2019 MY Sedona vehicles.

will be conducting a Voluntary Emissions Service Campaign to inspect and, if necessary, replace the engine oil filler cap on certain 2018 MY Stinger, 2018 MY Cadenza, 2019 MY Sedona, 2019 MY Sorento, and 2019 MY Optima vehicles. The engine oil filler cap may contain a misprint of the SAE Engine Oil Viscosity Number.

that that Kia Motors America, Inc. will be conducting a Voluntary Emissions Service Campaign to inspect and, if necessary, replace the engine oil filler cap on certain 2018 MY Stinger, 2018 MY Cadenza, 2019 MY Sedona, 2019 MY Sorento, and 2019 MY Optima vehicles. The engine oil filler cap may contain a misprint of the SAE Engine Oil Viscosity Number.

improve the logic of the Engine Control Module (ECM) on some 2019-2020MY Sedona (YP) 3.3 GDI 8AT ULEV vehicles, produced from February 13, 2018 through August 27, 2019, which may exhibit an ECM MIL ON with DTC P0456.

This bulletin provides information related to extracting "in use performance tracking" emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the In-Panel Module (IPM) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked with the use of the key fob.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the In-Panel Module (IPM) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.

This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the In-Panel Module (IPM) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.

developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of the original letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to the vehicle to discourage a break-in.

COMPATIBILITY (CS2310) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software logic in the Kia Genuine Remote Start Control Module on certain 2012-2022MY model vehicles listed on page 7. Vehicles equipped with a Kia Genuine Remote Start feature and have had the Anti-Theft software logic (CS230*) applied to the Integrated Body Control Unit (IBU) or Body Control Module (BCM) may experience five (5) inadvertent honks after starting the vehicle with the remote start feature.

COMPATIBILITY (CS2310) - This bulletin provides information to update the software logic in the Kia Genuine Remote Start Control Module on certain 2012-2022MY model vehicles listed on page 6. Vehicles equipped with a Kia Genuine Remote Start feature and have had the Anti-Theft software logic (CS230*) applied to the Integrated Body Control Unit (IBU) or Body Control Module (BCM) may experience five (5) inadvertent honks after starting the vehicle with the remote start feature.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.

developed a software upgrade that can be installed on the vehicle to restrict the operation of the vehicle's ignition system should a locked vehicle be the subject of a break-in and theft attempt without the key. This software upgrade will be available to the customer free of charge for eighteen (18) months from the date of this letter. When the software upgrade is complete, Kia will also provide the customer with window stickers that can be applied to your vehicle to discourage a break-in.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation which activates when the vehicle is locked.

bulletin provides the procedure to upgrade the software logic of the Integrated Body Control Unit (IBU) or Body Control Module (BCM) system on certain 2011-2014MY Sedona (VQ) vehicles produced from March 3, 2010 through April 4, 2014 and certain 2015-2021MY Sedona (YP) vehicles produced from July 29, 2014 through July 8, 2020, which may not be equipped with an immobilizer. This logic upgrade will add anti-theft ignition start logic to the vehicle's system operation. Follow the procedure outlined in this publication to apply the improved logic to the "IBU-BCM" system using the KDS ECU Upgrade function as described in this bulletin. For confirmation that the latest reflash has been applied to a vehicle you are working on, verify the ROM ID using the table on page 3 of this bulletin.

alignment on 2014MY and later vehicles that may exhibit a warning light ON related to radar sensor alignment errors in the Forward Collision-Avoidance Assist (FCA)/Smart Cruise Control (SCC) system.

Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a Warning Lamp to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission.

A flush is required ONLY when a transmission is replaced.

correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles in the chart starting on page 2.

This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles on page 2. Refer to the shop manual on KGIS for the specific Kia model for the correct transmission fluid check/fill procedures.

This bulletin provides the procedure to improve the logic of the Transmission Control Unit (TCU) software on some 2019MY Sorento (UMa) vehicles produced from January 24, 2018 through March 26, 2019, and Sedona (YP) produced from February 14, 2018 through October 15, 2018, which may experience a malfunction indicator lamp (MIL) ON with DTC P0741.

with the customer letter advising them to submit the form if they had paid for repairs for this same matter prior to the warranty extension program launch.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This pitstop provides the KDS service procedure for mileage setting on the models listed below with newly replaced instrument clusters. Certain models allow for mileage setting with the KDS, which prevents the need to send out the instrument cluster to a 3rd party for mileage adjustment (refer to PS264). After a new cluster is installed, cluster (variant) coding may also need to be conducted using the KDS. Make sure the KDS software is also updated to the latest version. Mileage setting should be performed by using the KDS only, as described in this bulletin.

3rd row seat inboard latch engagement on some 2019-2020MY Sedona (YP) vehicles, produced from February 18, 2019 through November 15, 2019, and if necessary, replace the rubber damper. Slight up and down seat movement may be felt when the inboard front latch is not properly locking in place, which may be caused by a defective rubber damper inside the latch.

Attention Warning (DAW) feature on equipped Sedona (YP) vehicles. The default setting of this feature is set 'OFF' from the factory and needs to be enabled for operation utilizing the Kia Diagnostic System (KDS). This feature cannot be enabled via the user settings menu in the instrument cluster until it is first enabled by KDS.

regarding the procedure to repair the bulb connector on some 2010MY~ vehicles listed on the table below, which may exhibit a bulb connector concern. To correct this concern, replace the connector with a new and improved part.

the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster. The KDS is required to change the setting from "Workshop" to "Customer Mode."

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

operation of Multi-Function Camera (MFC) on some Kia vehicles. When normal operation is not possible due to certain outside environment conditions (such as sunlight glare, heavy rain, sunlight, snow, fog and/or substance/debris) causing a temporary concern. This stops operation causing Warning Lamp ON and/or Pop-up Message displayed on the cluster. This is a normal operation of the ADAS and once environment conditions improve and/or substance/debris are removed, the system will clear itself and operate normally.

the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

- This bulletin provides the repair procedure to replace the sliding door lock/unlock release actuator on manual and power sliding doors on some 2015 - 2021MY Sedona (YP) vehicles produced from July 24, 2014~ to present, which may exhibit an inoperative door lock/unlock actuator.

been revised to include additional information.This bulletin provides the procedure to inspect the tailgate gas lift dust covers and if necessary, replace the tailgate gas lift(s) on certain non-power tail gate equipped 2019-2020MY Sedona (YP) vehicles produced between March 04, 2019 through June 25, 2019.

inspect the tailgate gas lift dust covers and if necessary, replace the tailgate gas lift(s) on certain non-power tail gate equipped 2019-2020MY Sedona (YP) vehicles produced between March 04, 2019 through June 25, 2019.

BEEN REVISED TO INCLUDE ADDITIONAL INFORMATION. This bulletin provides the procedure to inspect the tailgate gas lift dust cover and if necessary, replace the tailgate gas lift(s) on non-power tail gate 2019-2020MY Sedona (YP) produced between March 04, 2019 through June 25, 2019, which may exhibit an inoperative tailgate gas lift due to dust cover cracks.

provides the procedure to inspect the tailgate gas lift dust cover and if necessary, replace the tailgate gas lift(s) on non-power tail gate 2019-2020MY Sedona (YP) produced between March 04, 2019 through June 25, 2019, which may exhibit an inoperative tailgate gas lift due to dust cover cracks.

the most frequently asked questions regarding the Warranty Extension Campaign WTY034.

New/revised sections of this bulletin are indicated by a black bar in the margin area.This bulletin provides information on setting the "Service Interval Reminder" feature available on most 2014-2023MY Kia vehicles (refer to model list on page 2). If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance. Refer to TSB ENG241 for 2023MY~ vehicles equipped with the Oil Life Management System (OLMS) feature not included in table on page 2.

Interval Reminder" feature available on most Kia vehicles. If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance.

for mileage setting on the listed vehicles with newly replaced instrument clusters.

extending the New Vehicle Limited Warranty coverage, to all owners, for the high-pressure fuel pump in 2019-2021 MY Sedona vehicles from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service.

substance found on some Kia vehicles, due to possible excess assembly oil applied during assembly.

feature on some 2019-2020MY Sedona (YP PE) vehicles.