2020 Kia Optima Phev TSBs

Kia is conducting a Product Improvement Campaign to perform a software update on 2019-2020 MY Kia Optima HEV & PHEV vehicles to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit (ECU).

Kia conducting an important Product Improvement Campaign to perform a software update on n 2019-2020 MY Kia Optima HEV & PHEV vehicles to protect the engine from excessive connecting rod bearing damage.

DTC P1326 (PI2108Y/Z) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information related to the Technical Service Bulletin previously published in (PI2108) titled Knock Sensor Detection System - ECU Logic Improvement for certain 2019-2020MY Optima P/HEV (JF P/HEV) vehicles equipped with Nu 2.0L GDI engine, produced from July 6, 2018 through October 28, 2019. Specifically, this bulletin provides instructions on which procedures to follow if, after installation of the KSDS, any one of the subject vehicles below return to the dealer with Diagnostic Trouble Code (DTC) P1326 (Knock Signal Range/Performance).

Kia is conducting a Product Improvement Campaign to perform a software update on 2019-2020 MY Kia Optima Hybrid (HEV) and Plug-In Hybrid (PHEV) vehicles to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit ("ECU").

bulletin provides information related to a software update to the Engine Control Unit (ECU) to install the Knock Sensor Detection System (KSDS), in order to protect the Hybrid engine from excessive connecting rod bearing damage. This update is for certain 2019-2020MY Optima (JF HEV) and (PHEV) vehicles equipped with Nu 2.0L GDI engines, produced from July 6, 2018 through October 28, 2019.

conducting a Product Improvement Campaign to perform a software update on 2019-2020 MY Kia Optima HEV & PHEV vehicles to protect the engine from excessive connecting rod bearing damage. The update will be done free of charge and will only involve the addition of newly developed computer software for the Engine Control Unit ("ECU") (PI2108).

Parts and Service Managers that Kia is conducting a Product Improvement Campaign to perform a software update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage on 2019-2020 MY Kia Optima HEV vehicles manufactured from July 6, 2018 through October 28, 2019 and 2019-2020 MY Kia Optima PHEV vehicles manufactured from July 6, 2018 through May 30, 2019.

Kia is conducting a Product Improvement Campaign to perform a software update to the Engine Control Unit (ECU) to protect the engine from excessive connecting rod bearing damage on 2019-2020 MY Kia Optima HEV vehicles manufactured from July 6, 2018 through October 28, 2019 and 2019-2020 MY Kia Optima PHEV vehicles manufactured from July 6, 2018 through May 30, 2019.

the small bearing of the Column Motor Driven Power Steering (C-MDPS) unit on the vehicles listed below, which may exhibit an abnormal noise when steering left and right. This may be caused by foreign substances in the MDPS worm shaft small bearing. On some vehicles when the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Small Bearing and does not affect the steering effort.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Steering Column Housing, or Worm Gear Assembly. When the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit. On some vehicles when the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly and does not affect the steering effort.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Steering Column Housing, or Worm Gear Assembly. When the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. - This bulletin provides information related to extracting in use performance tracking emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Worm Gear Assembly or Steering Column Housing on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Worm Gear Assembly or Steering Column Housing on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

information related to extracting "in use performance tracking" emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting.

revised to include additional information.This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU) or Steering Column Housing on some 2010MY~ Kia models listed on page 5 equipped with a Column Motor Driven Power Steering (C-MDPS) unit. Follow the MDPS Flowchart (page 2) along with the MDPS DTC Table (page 3) procedure outlined in this bulletin before replacing the C-MDPS Motor, ECU or Steering Column Housing.

has been revised to include additional information.This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU) or Steering Column Housing on some 2010MY~ Kia models listed on page 5 equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

the lower engine service cover on 2016-2020MY Optima 2.4L and 2.0L equipped vehicles. The lower engine service cover is secured by seven (7) retaining bolts. Installation of the two (2) long bolts in the incorrect location may cause puncture or damage to the oil pan in the event that the vehicle is bottomed out while driving. If the oil pan is damaged or punctured, the engine oil may leak, possibly causing engine damage. This

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to update the software on 5th Generation AVN wide on certain 2020-2024MY Kia vehicles (refer to model list on page 3) to remedy a 'non-responsive' or 'inoperative' radio (FM, AM, SXM, etc. ) concern. The affected AVN unit on the vehicles may not respond when pressing the 'RADIO' hard key/button on the AVN unit or when selecting the 'RADIO' icon on the AVN menu screen.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop contains information regarding the log file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.

the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster. The KDS is required to change the setting from "Workshop" to "Customer Mode."

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop contains information regarding the log file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to turn OFF the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

file collection procedure for 2020MY~ models equipped with AVN 5.0/W or Display Audio 2.0 head units.

operation of Multi-Function Camera (MFC) on some Kia vehicles. When normal operation is not possible due to certain outside environment conditions (such as sunlight glare, heavy rain, sunlight, snow, fog and/or substance/debris) causing a temporary concern. This stops operation causing Warning Lamp ON and/or Pop-up Message displayed on the cluster. This is a normal operation of the ADAS and once environment conditions improve and/or substance/debris are removed, the system will clear itself and operate normally.

the service reminder lamp, at the first service interval reminder alert that will display on the instrument cluster.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding partial repair of the Air Conditioning (A/C) compressor assembly on some 2011MY~ Optima Hybrid (TF HEV, JF HEV/PHEV), 2015MY~ Soul EV (PS EV), 2017MY~ Niro (DE HEV/PHEV/EV), 2022MY~ EV6 (CV), 2021MY~ Sorento (MQ4 HEV/PHEV), 2023MY~ Sportage (NQ5 HEV/PHEV), and 2023MY~ Niro (SG2 EV/HEV/PHEV) vehicles.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin outlines the ordering and return procedure for high-voltage Lithium-ion batteries equipped on EV/hybrid vehicles (hereafter referred to as "high-voltage batteries" or HVBs).

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin outlines the ordering and return procedure for high-voltage Lithium-ion batteries equipped on EV/hybrid vehicles (hereafter referred to as "high-voltage batteries" or HVBs).

alignment on 2014MY and later vehicles that may exhibit a warning light ON related to radar sensor alignment errors in the Forward Collision-Avoidance Assist (FCA)/Smart Cruise Control (SCC) system.

partial repair of the Air Conditioning (A/C) compressor assembly on some 2011MY~ Optima (TF HEV, JF HEV/PHEV/EV), Soul (PS EV) and Niro (DE HEV/PHEV/EV) vehicles.

resetting the modem in certain 2016-2025MY Kia vehicles listed on page 3 that are equipped with Kia Connect Services. The affected vehicles may encounter the following issues: remote Start/Climate Control function not working, vehicle Status on the Kia Access App not updating, connected routing not functioning properly.

A/C system leak detection dye to be used in all EV, HEV, and PHEV models equipped with an electric A/C compressor.

New/revised sections of this bulletin are indicated by a black bar in the margin area.This bulletin provides information on setting the "Service Interval Reminder" feature available on most 2014-2023MY Kia vehicles (refer to model list on page 2). If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance. Refer to TSB ENG241 for 2023MY~ vehicles equipped with the Oil Life Management System (OLMS) feature not included in table on page 2.

frequently asked questions regarding the Product Improvement Campaign (PI2108).

A flush is required ONLY when a transmission is replaced.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This pitstop provides the KDS service procedure for mileage setting on the models listed below with newly replaced instrument clusters. Certain models allow for mileage setting with the KDS, which prevents the need to send out the instrument cluster to a 3rd party for mileage adjustment (refer to PS264). After a new cluster is installed, cluster (variant) coding may also need to be conducted using the KDS. Make sure the KDS software is also updated to the latest version. Mileage setting should be performed by using the KDS only, as described in this bulletin.

provides information to properly test the evaporative emissions system in all Kia 2011MY~ Hybrid (HEV) and Plug-In Hybrid (PHEV) model vehicles. A smoke machine should NEVER be used when testing the evaporative system in a HEV/PHEV model vehicle.

substance found on some Kia vehicles, due to possible excess assembly oil applied during assembly.