2026 Kia EV9 TSBs

that Kia is conducting a Product Improvement Campaign on 2024-2026 MY EV9 vehicles to replace the passenger-side wiper arm on your vehicle with an improved wiper arm of a different shape and angle to increase the clearance between the wiper and windshield cowl.

provides information to install enhanced windshield wiper software on certain 20242026MY EV9 (MV1, MV1a) vehicles as listed.

is conducting a Product Improvement Campaign on all 2024-2025 MY and certain 2026 MY EV9 vehicles to install enhanced windshield wiper software that provides drivers with additional reminders related to the use of the windshield wipers during winter conditions.

dealer Parts and Service managers advising that Kia is conducting a a Product Improvement Campaign on all 2024-2025 MY and certain 2026 MY EV9 vehicles, manufactured from September 25, 2023 through July 16, 2026, to install enhanced windshield wiper software that provides drivers with additional reminders related to the use of the windshield wipers during winter weather conditions.

principals advising that Kia is conducting a Product Improvement Campaign on all 2024-2025 MY and certain 2026 MY EV9 vehicles, manufactured from September 25, 2023 through July 16, 2026, to install enhanced windshield wiper software that provides drivers with additional reminders related to the use of the windshield wipers during winter weather conditions.

provides the service procedure to replace the passenger-side (RH) windshield wiper arm on certain 2024-2026MY EV9 (MV1, MV1a) vehicles listed in the table below. During winter conditions, the windshield wipers may become temporarily inoperable due to accumulated snow on the windshield or cowl area. Kia has developed a newly designed passenger-side wiper arm of a different shape and angle to increase the clearance between the wiper and windshield cowl.

is conducting a Product Improvement Campaign on 2024-2026 MY EV9 vehicles to replace the passenger-side wiper arm on your vehicle with an improved wiper arm of a different shape and angle to increase the clearance between the wiper and windshield cowl.

dealer Parts and Service managers advising that Kia is conducting a a Product Improvement Campaign on 2024-2026 MY EV9 vehicles, manufactured from September 25, 2023 through April 9, 2026, to replace the passenger-side wiper arm with an improved wiper arm of a different shape and angle to increase the clearance between the wiper and windshield cowl.

principals advising that Kia is conducting a a Product Improvement Campaign on 2024-2026 MY EV9 vehicles, manufactured from September 25, 2023 through April 9, 2026, to replace the passenger-side wiper arm with an improved wiper arm of a different shape and angle to increase the clearance between the wiper and windshield cowl.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to install enhanced windshield wiper software that provides drivers with additional warnings related to the use of the windshield wipers during winter conditions on all 2024-2025 MY and certain 2026 MY EV9 (MV1, MV1a) vehicles manufactured from September 25, 2023, through October 31, 2025. The enhanced software detects obstructed windshield wipers and provides advance messages to remind the driver to check for any obstructions such as snow/ice in the windshield wiper area.

principals advising that Kia is conducting a Product Improvement Campaign on all 2024-2025 MY and certain 2026 MY EV9 vehicles, manufactured from September 25, 2023 through November 28, 2025, to install enhanced windshield wiper software that provides drivers with additional warnings related to the use of the windshield wipers during winter conditions.

dealer Parts and Service managers advising that Kia is conducting a a Product Improvement Campaign on all 2024-2025 MY and certain 2026 MY EV9 vehicles, manufactured from September 25, 2023 through November 28, 2025, to install enhanced windshield wiper software that provides drivers with additional warnings related to the use of the windshield wipers during winter conditions

conducting a Product Improvement Campaign to install enhanced windshield wiper software in all 2024-2025 MY and certain 2026 MY EV9 vehicles to provide drivers with additional warnings related to the use of the windshield wipers during winter conditions.

provides information to install enhanced windshield wiper software that provides drivers with additional warnings related to the use of the windshield wipers during winter conditions on all 2024-2025 MY and certain 2026 MY EV9 (MV1, MV1a) vehicles manufactured from September 25, 2023, through October 31, 2025. The enhanced software detects obstructed windshield wipers and provides advance messages to remind the driver to check for any obstructions such as snow/ice in the windshield wiper area.

In some cases, high-voltage charging performance may be limited or inoperative and accompanied by an illuminated malfunction indicator lamp (MIL) with DTC P343A98 stored. This condition may occur if the Electric Water Pump #1 (Power Electronics) E65 connector and Electric Water Pump #2 (High-Voltage Battery) E66 connector being inadvertently swapped.

the Vehicle-to-Everything V2X function enhancements by upgrading the software of the Central Communication Unit CCU on certain 2025 - 2026MY EV9 (MV1a) vehicles produced at Kia Georgia (KaGA) that have been unable to be updated using the Over-The-Air OTA method. The V2X technology allows EV9 vehicles to interact with other devices such as Vehicle-to-Home V2H and Vehicle-to-Grid V2G technology which enables bidirectional charging, where the EV's battery can be used as a mobile energy storage unit, providing power to the grid or a home backup power source.

conducting a Voluntary Service Campaign on certain 2024-2026 MY EV9 vehicles to reposition an electrical connector in the driver's footwell to prevent accidental disconnection by the driver's foot.

advising that Kia is conducting a Voluntary Service Campaign on certain 2024-2026 MY EV9 vehicles manufactured from September 25, 2023 through April 29, 2025 to reposition an electrical connector in the drivers footwell to prevent accidental disconnection by the drivers foot.

dealer Parts and Service managers advising that Kia is conducting a Voluntary Service Campaign on certain 2024-2026 MY EV9 vehicles manufactured from September 25, 2023 through April 29, 2025 to reposition an electrical connector in the drivers footwell to prevent accidental disconnection by the drivers foot.

provides information on repositioning the EF31 electrical connector by replacing the bracket with an improved one for certain 2024MY-2026MY EV9 (MV, MVa) vehicles within the production ranges listed in the table of this bulletin. The EF31 electrical connector, located near the top of the drivers footrest, may become disconnected due to interference from the drivers foot. If this electrical connector becomes disconnected, the 12V battery may discharge, which can cause the service warning light and/or check electric vehicle system message to illuminate. If the vehicle continues to be driven in this condition, the Power Limited (Turtle) warning light may illuminate, and the vehicle may enter Limp Home Mode with speed temporarily limited.

Electric Vehicle EV charging error accompanied by DTC P343B16 on certain 2025-2026MY EV6 (CVa) and 2026MY EV9 (MVa) vehicles equipped with Combined Charging System Combo 1 (CCS1, also known as SAE J1772 Combo) charging ports. When using the wrong CCS1 to North American Charging Standard NACS adapter, proper electrical connections are not made between the charger to adapter and adapter to vehicle charging port, resulting in a charging error which can cause DTC P343B16 to set. Non-OEM adapters may not set the DTC P343B16.

provides instructions for replacing the Integrated Charge Controller Unit (ICCU) on certain 2025 model year EV6 (CVa) and 2026 EV9 (MVa) vehicles produced between February 21, 2025, and September 18, 2025. Affected vehicles may exhibit Diagnostic Trouble Code (DTC) P2E9092 related to the Battery Charger A Internal Power Supply, resulting in an inability to charge under Level 1 or Level 2 conditions.

instructions for updating the Finger Print Module (FPM) software on all 20242026MY EV9 (MV1, MV1a) vehicles. The affected vehicles may experience discharge of the auxiliary (12-volt) battery when the vehicle is parked for an extended period due to the FPM not entering sleep mode. This may result in a no-start condition.

Central Communication Unit CCU and Power Transfer Communication Module PCM system software on certain 2025MY EV6 (CVa) vehicles produced from January 7, 2025 through August 20, 2025, and 2026MY EV9 (MVa) vehicles produced from January 2, 2025 through September 3, 2025 built at a Kia assembly plant in the US, that have either failed the Over-The-Air (OTA) software upgrade or in cases where Kia Connect is not available to the customer. This update provides certain EV6 (CVa) and EV9 (MVa) with the Plug and Charge (PnC) feature that simplifies the process of charging electric vehicles (EVs) by automating authentication and payment. It allows drivers to simply plug their vehicle into a compatible charging station, and the charging process starts automatically without needing to use an app, card, or other form of authentication.

the most frequently asked questions regarding the Product Improvement Campaign PI2601B.

Insert Leaflet that contains revised information for wipers. Vehicle owners are advised to keep this leaflet with the Owner's Manual.

the most frequently asked questions regarding the Product Improvement Campaign PI2601A.

most frequently asked questions regarding the Voluntary Service Campaign SC360.

- This bulletin provides information to inspect the front passenger walk-in seat switch on certain 20252026MY EV9 (MV1a) vehicles produced from May 16, 2024 through August 21, 2025. On some vehicles, the switch may not be mounted flush to the backrest cushion. This condition does not affect the functionality of the switch and is a cosmetic issue only.

the most frequently asked questions regarding the Product Improvement Campaign PI2502.

information and service procedures for updating the infotainment systems on applicable Kia vehicles using the Kia Navigation Updater available at update.kia.com. The software update may improve system performance, enhance existing features, and apply the latest operating software for supported vehicles (2021-2026MY All Models).

for downloading infotainment software updates and preparing USB for installation on applicable Kia vehicles. The software downloads and USB preparation process is similar across all supported platforms; however, invehicle installation procedures vary by head unit type.

part of Kias ongoing commitment to providing vehicle owners with a superior ownership experience, Kia would like to remind owners about the importance of proper SNOW/ICE REMOVAL BEFORE DRIVING, as well as the related windshield wiper system warning feature. The Kia EV9 may display warning messages to inform drivers to check for any obstructions such as snow/ice in the windshield wiper area when operating in winter conditions.

software update is designed to update the Vehicle Control Unit (VCU) logic of certain 2026 EV9 vehicles. This update is designed to improve the processing logic of the Vehicle Control Unit (VCU) to reduce the unintended display of warning lights.

seat slide motor tube from the power front seats on certain 2026MY EV9 (MV1a) vehicles produced from January 2, 2025, through January 3, 2026. The subject vehicles may exhibit a buzzing noise while the user operates the front power seat slide (forward and rearward) functions. This condition does not affect seat functionality.

remove the seat slide motor tube from the power front seats on certain 2026MY EV9 (MV1a) vehicles produced from January 2, 2025, through January 3, 2026, that are in dealer stock only. The subject vehicles may exhibit a buzzing noise while the user operates the power seat slide (forward and rearward) functions. This condition does not affect seat functionality.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to upgrade the Vehicle Control Unit (VCU) system software on certain 2026MY EV9 (MV1a) vehicles produced from January 2, 2025 through November 3, 2025, where the Integrated Electronic Brake (IEB) Controller Area Network (CAN) times out on startup, resulting in a DTC warning light and failure to restart charging when the connector remains connected after charging is completed. This condition is not associated with any braking or drivability symptoms.

to upgrade the Vehicle Control Unit (VCU) system software on certain 2026MY EV9 (MV1a) vehicles produced from January 2, 2025 through November 3, 2025, where the Integrated Electronic Brake (IEB) Controller Area Network (CAN) times out on startup, resulting in a DTC warning light and failure to restart charging when the connector remains connected after charging is completed. This condition is not associated with any braking or drivability symptoms.

designed to update the Communication Control Unit (CCU) logic of certain 2025 2026MY EV9 vehicles. This update is designed to improve the Communication Control Unit (CCU) logic to enhance charging-related messaging in the app.

software update is designed to update the Data Connectivity Unit (DCU) logic of certain 2025 - 2026MY Carnival, EV9, K5 and Sorento vehicles. This update is designed to improve the vehicles network communication performance.

Data Connectivity Unit (DCU) system software on some 20252026MY vehicles listed in the table below. Kia has identified that Connected Car Services (CCS) functionality may intermittently fail due to temporary DCU communication issues. This condition can impact convenience and connectivity features by causing the Remote Start and Remote Climate functions to become inoperative, prevent vehicle status updates in the Kia Access app, and interrupt connected navigation routing services.

Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a Warning Lamp to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)