2017 Kia Cadenza TSBs

revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY039) to diagnose a coolant leak from the cylinder head gasket area and, if necessary, replace the engine sub assembly on 2014-2015 MY Sorento, 2014-2017 MY Cadenza, and 2015-2016 MY Sedona vehicles, equipped with 3.3L GDI engines. The warranty coverage for repairs related to the cylinder head gasket will be extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service.

revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY039) to diagnose a coolant leak from the cylinder head gasket area and, if necessary, replace the engine sub assembly on 2014-2015 MY Sorento, 2014-2017 MY Cadenza, and 2015-2016 MY Sedona vehicles, equipped with 3.3L GDI engines. The warranty coverage for repairs related to the cylinder head gasket will be extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY039) to diagnose a coolant leak from the cylinder head gasket area and, if necessary, replace the engine sub assembly on 2014-2015 MY Sorento, 2014-2017 MY Cadenza, and 2015-2016 MY Sedona vehicles, equipped with 3.3L GDI engines. The warranty coverage for repairs related to the cylinder head gasket will be extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY039) to diagnose a coolant leak from the cylinder head gasket area and, if necessary, replace the engine sub assembly on 2014-2015 MY Sorento, 2014-2017 MY Cadenza, and 2015-2016 MY Sedona vehicles, equipped with 3.3L GDI engines. The warranty coverage for repairs related to the cylinder head gasket will be extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service.

has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY034) to diagnose the Malfunction Indicator Lamp (MIL) accompanied by DTC P0088 and, if necessary, replace the high-pressure fuel pump on 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020, 2017-2020 MY Cadenza vehicles manufactured from June 2, 2016 through October 15, 2020, and 2019-2020 MY Sorento vehicles equipped with 3.3L V6 Engines manufactured from January 24, 2018 through October 26, 2020.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY039) to diagnose a coolant leak from the cylinder head gasket area and, if necessary, replace the engine sub assembly on 2014-2015 MY Sorento, 2014-2017 MY Cadenza, and 2015-2016 MY Sedona vehicles, equipped with 3.3L GDI engines. The warranty coverage for repairs related to the cylinder head gasket will be extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY039) to diagnose a coolant leak from the cylinder head gasket area and, if necessary, replace the engine sub assembly on 2014-2015 MY Sorento, 2014-2017 MY Cadenza, and 2015-2016 MY Sedona vehicles, equipped with 3.3L GDI engines. The warranty coverage for repairs related to the cylinder head gasket will be extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service.

has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY034) to diagnose the Malfunction Indicator Lamp (MIL) accompanied by DTC P0088 and, if necessary, replace the high-pressure fuel pump on 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020, 2017-2020 MY Cadenza vehicles manufactured from June 2, 2016 through October 15, 2020, and 2019-2020 MY Sorento vehicles equipped with 3.3L V6 Engines manufactured from January 24, 2018 through October 15, 2020.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information associated with the Warranty Extension Program (WTY039) to diagnose a coolant leak from the cylinder head gasket area and, if necessary, replace the engine sub assembly on 2014-2015 MY Sorento, 2014-2017 MY Cadenza, and 2015-2016 MY Sedona vehicles, equipped with 3.3L GDI engines. The warranty coverage for repairs related to the cylinder head gasket will be extended from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service.

bulletin provides information associated with the Warranty Extension Program (WTY039) to diagnose a coolant leak from the cylinder head gasket area and, if necessary, replace the engine sub-assembly on 2014-2015 MY Sorento (3.3L GDI Lambda), 2014-2017 MY Cadenza (3.3L GDI Lambda), 2015-2016 MY Sedona (3.3L GDI Lambda) vehicles.

extending the New Vehicle Limited Warranty coverage, to all owners, for certain repairs related to the vehicles engine in 2014-2017 MY Cadenza vehicles from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. Under certain severe operating conditions and over time, the engine in the vehicle may develop a coolant leak from the cylinder head gasket area.

provides information associated with the Warranty Extension Program (WTY034) to diagnose the Malfunction Indicator Lamp (MIL) accompanied by DTC P0088 and, if necessary, replace the high-pressure fuel pump on 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020, 2017-2020 MY Cadenza vehicles manufactured from June 2, 2016 through October 15, 2020, and 2019-2020 MY Sorento vehicles equipped with 3.3L V6 Engines manufactured from January 24, 2018 through October 15, 2020.

dealer Parts and Service Managers that Kia is extending the New Vehicle Limited Warranty coverage, to all owners, for repairs related to the high-pressure fuel pump for eligible vehicles from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address the high-pressure fuel pump condition on 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020, 2017-2020 MY Cadenza vehicles manufactured from June 2, 2016 through October 15, 2020, and 2019-2020 MY Sorento vehicles equipped with 3.3L V6 Engines manufactured from January 24, 2018 through October 15, 2020.

that Kia is extending the New Vehicle Limited Warranty coverage, to all owners, for repairs related to the high-pressure fuel pump for eligible vehicles from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address the high-pressure fuel pump condition on the following vehicles: 2019-2021 MY Sedona vehicles manufactured from February 13, 2018 through July 8, 2020, 2017-2020 MY Cadenza vehicles manufactured from June 2, 2016 through October 15, 2020, and 2019-2020 MY Sorento vehicles equipped with 3.3L V6 Engines manufactured from January 24, 2018 through October 15, 2020.

dealer Parts and Service Managers that Kia is extending the New Vehicle Limited Warranty coverage, to all owners, for certain repairs related to the vehicles engine in the following vehicles equipped with 3.3L V6 engines: 2014-2015 MY Sorento vehicles, manufactured from December 17, 2012 through December 11, 2014, 2014-2017 MY Cadenza vehicles, manufactured from February 1, 2013 through July 12, 2017, and 2015-2016 MY Sedona vehicles, manufactured from July 21, 2014 through March 17, 2016. This will extend the warranty from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service. Under certain severe operating conditions and over time, the engine in the vehicle may develop a coolant leak from the cylinder head gasket area.

that Kia is extending the New Vehicle Limited Warranty coverage, to all owners, for certain repairs related to the vehicles engine in the following vehicles equipped with 3.3L V6 engines: 2014-2015 MY Sorento vehicles, manufactured from December 17, 2012 through December 11, 2014, 2014-2017 MY Cadenza vehicles, manufactured from February 1, 2013 through July 12, 2017, and 2015-2016 MY Sedona vehicles, manufactured from July 21, 2014 through March 17, 2016. This will extend the warranty from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Steering Column Housing, or Worm Gear Assembly. When the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit. On some vehicles when the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly and does not affect the steering effort.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to some Kia models that may exhibit fogging, condensation, and/or moisture inside a headlamp assembly. Generally, a fogging condition is considered normal and can be eliminated by turning on the headlamps with the engine running for up to 30 minutes or during normal driving conditions. Headlamp assembly replacement WILL NOT be necessary in most cases.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Steering Column Housing, or Worm Gear Assembly. When the steering wheel is rotated a scraping noise can be heard originating from the lower bearing on the Worm Gear Assembly on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Worm Gear Assembly or Steering Column Housing on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Worm Gear Assembly or Steering Column Housing on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

revised to include additional information.This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU) or Steering Column Housing on some 2010MY~ Kia models listed on page 5 equipped with a Column Motor Driven Power Steering (C-MDPS) unit. Follow the MDPS Flowchart (page 2) along with the MDPS DTC Table (page 3) procedure outlined in this bulletin before replacing the C-MDPS Motor, ECU or Steering Column Housing.

has been revised to include additional information.This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU) or Steering Column Housing on some 2010MY~ Kia models listed on page 5 equipped with a Column Motor Driven Power Steering (C-MDPS) unit.

This bulletin provides information relating to all Kia vehicles equipped with Gasoline Direct Injection (GDI) engines. In these engines highly pressurized gasoline is injected via a common fuel rail and injectors that deliver fuel directly into the combustion chamber of each cylinder. In comparison, in a conventional Multi-Point Fuel Injection (MPI) engine, the gasoline is injected into the intake port of each cylinder at a relatively low pressure. Due to high fuel pressure in a GDI system, servicing the GDI system requires special attention and handling procedures. This bulletin provides special service information and specifications for the GDI fuel system components.

(Evaporative Emissions System ? (Very) Small Leak Detected) or fuel smell on some 2017MY Cadenza (YG) vehicles, produced before August 7, 2017 and some Optima Hybrid (JF HEV) vehicles, produced before August 16, 2017. When addressing the concern with DTC P0456/P0442 and the vapor lines, fuel cap, and all other corresponding circuits are found to be within specifications, it may be necessary to inspect the fuel pump seal for damage. If this seal is found to be torn or split, replace the fuel pump seal by referring to the ?Engine Control / Fuel System ? Fuel Delivery System ? Low Pressure Fuel Pump ? Repair procedures? chapter in the applicable Shop Manual on KGIS.

considered serviceable, and should be thoroughly cleaned and transferred to the new engine.

improve the logic of the Transmission Control Unit (TCU) on some 2017-2018MY Cadenza (YG) vehicles, produced from June 2, 2016 through August 18, 2017, which may experience unusual 5th gear engagement instead of 1st gear after starting the engine and shifting from Park (P) to Drive (D).

regarding data transfer of automatic transmission (A/T) characteristic values on 2015MY-2018MY K900 (KH) vehicles equipped with A8TR1 8-speed A/T and 2017MY~ Sportage (QL), Forte (YDm), and Cadenza (YG) vehicles equipped with the GEN2 Type (A6MF2-2 6-speed / A8LF1 8-speed) A/T. The type of solenoid valve used to control gear shifts changed from indirect to direct control type to reduce oil capacity and improve fuel efficiency.

related to extracting ?in use performance tracking? emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California.

extracting ?in use performance tracking? emissions data from the Engine Control Unit (ECU) of certain vehicles sold in California. The California Air Resources Board (CARB) requires the emissions data from vehicles with a minimum of 3,000 accumulated miles without reprogramming or resetting. To facilitate collection of this data at the dealer level, KDS screenshots will allow the capture of relevant parameters.

that was mailed with the customer letter advising them to submit the form if they had paid for repairs for this same matter prior to the warranty extension program launch.

with the customer letter advising them to submit the form if they had paid for repairs for this same matter prior to the warranty extension program launch.

was mailed with the customer letter advising them to submit the form if they had paid for repairs for this same matter prior to the warranty extension program launch.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This pitstop provides the KDS service procedure for mileage setting on the models listed below with newly replaced instrument clusters. Certain models allow for mileage setting with the KDS, which prevents the need to send out the instrument cluster to a 3rd party for mileage adjustment (refer to PS264). After a new cluster is installed, cluster (variant) coding may also need to be conducted using the KDS. Make sure the KDS software is also updated to the latest version. Mileage setting should be performed by using the KDS only, as described in this bulletin.

regarding the procedure to repair the bulb connector on some 2010MY~ vehicles listed on the table below, which may exhibit a bulb connector concern. To correct this concern, replace the connector with a new and improved part.

replace the electric thermostat (ECT) assembly on some 2017-2018MY Cadenza (YG) vehicles, produced from January 6, 2016 through August 10, 2017, which may exhibit a Malfunction Indicator Light (MIL) illuminated with one or more DTCs.

replace the electric thermostat assembly on some 2017MY Cadenza (YG) vehicles, produced from June 2, 2016 through December 28, 2016, which may exhibit a Malfunction Indicator Light (MIL) illuminated. TSB CLOSED - REFER TO TSB ENG188/SA346.

Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a Warning Lamp to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)

New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, and the transmission oil cooler is transferred to the new transmission.

A flush is required ONLY when a transmission is replaced.

correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles in the chart starting on page 2.

This bulletin provides information relating to the correct transmission fluid type and fill quantity requirement for each Kia model. A flush is required ONLY when a transmission is replaced, refer to applicable vehicles on page 2. Refer to the shop manual on KGIS for the specific Kia model for the correct transmission fluid check/fill procedures.

JF-HEV, JF-PHEV) vehicles, the accelerator pedal features a small detent with a spring to provide increased resistance to help avoid unnecessary fuel consumption when applying full throttle. When the driver depresses the pedal beyond the resistance where the detent is felt (above 85% WOT), the pedal will easily reach WOT and kickdown shift will occur accordingly. For additional information, refer to the individual vehicle?s Owner?s Manual under section ?Driving Your Vehicle? ? Automatic Transmission (Drive).

the most frequently asked questions regarding the Warranty Extension Campaign WTY034.

frequently asked questions regarding the Warranty Extension Campaign WTY039.

asked questions regarding the warranty extension (WTY027).

Interval Reminder" feature available on most Kia vehicles. If the service interval reminder is set, the customer will be informed to have the next maintenance service performed, which can positively affect vehicle longevity and performance.

for mileage setting on the listed vehicles with newly replaced instrument clusters.

extending the New Vehicle Limited Warranty coverage, to all owners, for the high-pressure fuel pump in 2017-2020 MY Cadenza vehicles from 5 years / 60,000 miles to 15 years / 180,000 miles, whichever comes first, starting from the date the vehicle was first put into service.

New/revised sections of this bulletin are indicated by a black bar in the margin area. This Pitstop provides information regarding DTC P0456/P0442 (Evaporative Emissions System (Very) Small Leak Detected) or fuel smell on some 2017-2018MY Cadenza (YG) vehicles and some Optima Hybrid (JF HEV) vehicles, produced before August 16, 2017.

(Evaporative Emissions System ? (Very) Small Leak Detected) or fuel smell on some 2017MY Cadenza (YG) vehicles.

models such as K900 (KH), Sedona (YP), Sorento (UMa), Optima (JFa), Sportage (QL), and 17MY Forte (YD, YDm), etc., equipped with a sunroof, a ventilation logic has been applied in order to prevent exhaust gases flowing into the vehicle due to the pressure difference (inside vs outside) that is generated when driving with the sunroof open. This logic allows the system to automatically switch from RECIRCULATION to FRESH mode when the sunroof is open.

associated with the "Warranty Extension Program" (WTY027) to inspect and, if necessary, replace the Airbag Control Unit (ACU) with a new one on 2017MY Cadenza (YG) produced from June 2, 2016 through July 12, 2017 and Sportage (QL) vehicles produced from December 10, 2015 through April 11, 2017. If these vehicles exhibit an MIL "ON" and one or more of the DTCs listed in the table below are stored, the ACU is to be replaced. Follow the procedure outlined in this publication for the inspection of DTCs and ACU replacement.

Vehicle Limited Warranty coverage for repairs related to the illumination of the Airbag Warning Light in 2017 MY Cadenza vehicles from 5 years/60,000 miles to 15 years/unlimited miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address certain Airbag Warning Light ON conditions at no cost to you.

Service Managers that Kia is extending the New Vehicle Limited Warranty coverage for the repairs related to the Airbag Warning Light ON for 2017 MY Sportage and 2017 MY Cadenza vehicles from 5 years/60,000 miles to 15 years/unlimited miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address certain Airbag Warning Light ON conditions.

extending the New Vehicle Limited Warranty coverage for the repairs related to the Airbag Warning Light ON for 2017 MY Sportage and 2017 MY Cadenza vehicles from 5 years/60,000 miles to 15 years/unlimited miles, whichever comes first, starting from the date the vehicle was first put into service. This warranty extension is to address certain Airbag Warning Light ON conditions.

operation logic on some 2017-2020MY Cadenza (YG) vehicles, where the panoramic sunroof operation will not relearn.

revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides the procedure to repair a panoramic sunroof that exhibits a slow to close condition and/or abnormal noise when closing, on some 2017-2019MY Cadenza (YG) vehicles. Follow the procedure in this bulletin to clean, lubricate, and replace the rear tilt levers to correct the concern.

New/revised sections of this bulletin are indicated by a black bar in the margin area. When servicing windshield wipers on the below listed vehicles, including during PDI, ensure to raise the wiper arms to a vertical position to avoid damaging the paint on the rear edge of the hood.

the procedure to repair a panoramic sunroof that exhibits a slow to close condition and/or abnormal noise when closing, on some 2017-2019MY Cadenza (YG) vehicles.

alignment on 2014MY and later vehicles that may exhibit a warning light ON related to radar sensor alignment errors in the Forward Collision-Avoidance Assist (FCA)/Smart Cruise Control (SCC) system.

below during PDI, make sure to use the procedure outlined below to raise the wiper arms to the fully vertical position in order to avoid damaging the paint on the rear edge of the hood. It is important to note that the wipers on these vehicles are recessed under the hood to provide better appearance and reduced wind noise characteristics. This procedure applies to both key start and SMK type ignition systems.

The TPMS positioning from the manufacturer may be different from the positioning shown on a KDS.

SOME VEHICLES EQUIPPED WITH BLIND SPOT DETECTION (BSD), WHICH MAY EXHIBIT A CHECK BSD SYSTEM MESSAGE WITH DTCS: C270254 AND C270354: C270254: CONTROL MODULE MASTER MISSING CALIBRATION / C270354: CONTROL MODULE SLAVE MISSING CALIBRATION

and all Kia vehicles, after and including 2017MY, incorporate an anti-condensation logic to prevent the interior windows from becoming excessively fogged. The HVAC control head in these vehicles monitors ambient temperature to determine which settings will best prevent the windows from fogging. If the system detects lower ambient temperature (about 60F or below), the anti-condensation logic may automatically set the air intake mode to FRESH, depending on the other HVAC settings. The anti-condensation logic is also designed to ensure that air intake mode is set to FRESH, as long as all conditions are met. If the user changes the air intake to RECIRCULATION, the anti-condensation logic will take control again after 5 minutes, and change the air intake mode back to FRESH. If this results in an undesired operation, the logic may be enabled or disabled by following the procedure below.

incorporate a defogging logic to prevent the interior windows from becoming excessively fogged. Depending on the specific model, the HVAC control head monitors ambient temperature and/or cabin humidity to determine which settings will best prevent the windows from fogging. If the system detects lower ambient temperature or higher cabin humidity, the defogging logic may automatically switch ON the A/C, and/or set the air intake mode to Fresh Air. If the user changes these settings, the defogging logic will take control again after 3 to 5 minutes, depending on the procedure in this publication.

recycling, and recharging equipment. This equipment is designed to meet SAE J2843 requirements for servicing vehicles containing R1234yf refrigerant.

operation of Multi-Function Camera (MFC) on some Kia vehicles. When normal operation is not possible due to certain outside environment conditions (such as sunlight glare, heavy rain, sunlight, snow, fog and/or substance/debris) causing a temporary concern. This stops operation causing Warning Lamp ON and/or Pop-up Message displayed on the cluster. This is a normal operation of the ADAS and once environment conditions improve and/or substance/debris are removed, the system will clear itself and operate normally.

the clock on UVO eServices (UVO 3.0) head units installed on 2017-2018MY vehicles.

substance found on some Kia vehicles, due to possible excess assembly oil applied during assembly.

provides the procedure to inspect and/or replace the Hydraulic Electronic Control Unit (HECU) module mounting bolts or replace the HECU assembly depending on the inspection results on some 2017MY Sportage (QL) vehicles, produced from October 29, 2016 through November 21, 2016, and on some 2017MY Cadenza (YG) vehicles, produced from October 29, 2016 through December 2, 2016, which may exhibit damaged module mounting bolt heads. Vehicles within the production date range listed above may exhibit an illumination of the ABS/ESC warning lamp.

relating to the vehicles listed below with Blind Spot Detection (BSD), which may exhibit a ?Check BSD System? message and no communication with the BSD system after collision repairs.