2018 Keystone Montana TSBs

The information and instructions in a Keystone Service Bulletin (KSB) are intended to inform RV dealership Service Managers/Technicians of situations that may occur with some Recreational vehicles so dealership personnel can perform proper and efficient service. KSBs are intended to be used by trained RV technicians with the knowledge, tools and equipment to do the job properly and safely, not do-it-yourselfers. Inspection information is not presented as a repair guaranteed to be covered by warranty. Keystones P & P (Policy & Procedures) must be followed for any requested warranty work. Do not assume this inspection is covered by warranty. Not every unit requires a repair. This process describes the inspection of sidewall cracks and separation forward of the front slideouts to determine if there is a defect and what repair may need to be performed.

The information and instructions in a Keystone Service Bulletin (KSB) are intended to inform RV dealership Service Managers/Technicians of situations that may occur with some Recreational vehicles so dealership personnel can perform proper and efficient service. KSBs are intended to be used by trained RV technicians with the knowledge, tools and equipment to do the job properly and safely, not do-it-yourselfers. Information is not presented as a repair guaranteed to be covered by warranty. Keystones P & P (Policy & Procedures) must be followed for any requested warranty work. Do not assume this repair is covered by warranty. Not every unit listed requires a repair. Please read through the instructions start to finish before attempting the repair. This process describes the safe and proper procedure to repair any unit which experiences a crack at the bottom corner of a slideout at the gooseneck of a 5th wheel, opening the side wall to repair broken tube welds and add reinforcement. This technical service bulletin explains how to perform the repair. Please note: A sublet will be required for aluminum welding if you do not have that capability.

This process describes the repair where under certain temperature conditions the Norco slide cable system gearbox may leak oil/grease on the slide roof membrane. The KSB describes how to install a drip pan to prevent damage to the roof membrane, and make repairs if necessary.

This process describes the repair where under certain temperature conditions the Norco slide cable system gearbox may leak oil/grease on the slide roof membrane. The KSB describes how to install a drip pan to prevent damage to the roof membrane, and make repairs if necessary.

It has been determined that certain Atwood furnace models may have wiring that can come in contact with the exhaust vent tube causing the furnace to shut down in a safe manner.

It has been determined that certain Atwood furnace models may have wiring that can come in contact with the exhaust vent tube causing the furnace to shut down in a safe manner. This is the communication to the dealership regarding advisory 18-318 for certain Atwood furnace models. This is the final owner notification for adviosry 18-318, for certain Atwood furnace models. This is the revised repair instructions for advisory 18-318 for certain Atwood furnace models.