2027 Jeep Wagoneer S TSBs

gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.

gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.

Part numbers affected: 68630089AA 68630088AB 68649038AA Welcome Green LED turns on for 1 second after multiple IGN ON/OFF without sleep cycle and no phone on the charging pad. Intent of this condition is to notify the customer/dealership that the Wireless Charging Pad is ready to charge. Do not report as warranty claim, no impact to wireless charger functionality. Part numbers affected: 68630089AB 68630088AD 68649038AB Advice to dealership: Do no replace wireless charger PNs 68630089AA,68630088AB,68649038AA if no Welcome GREEN LED is seen after multiple IGN ON/OFF without sleep cycle and no phone on the charging pads. This feature is available in the successor NIKs, no impact to wireless charger functionality.

1. Please follow the service procedure: 08-Electrical/8N - Power Systems/ Power Top, Sunroof/ Diagnosis and Testing. 2. If sunroof motors continue to be inoperative, please contact STAR and reference SET 1599. ***This should be done before trying to replace the sunroof motors.***

The instrument cluster should not be replaced based solely on the presence of stored or pending DTCs in the IPC. Replacement should only be considered if the stored or pending DTC becomes active during the troubleshooting and diagnostic process.