2026 Jeep Compass TSBs

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): P0607 - Control Module Performance. Customers may also comment on one or more of the following: The vehicle will not start until the ignition is cycled for a second time. Engine malfunction (injection) warning lamp illuminated in the Instrument Panel Cluster (IPC). This bulletin involves reprogramming the PCM with the latest available software.

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): P0607 - Control Module Performance. Customers may also comment on one or more of the following: The vehicle will not start until the ignition is cycled for a second time. Engine malfunction (injection) warning lamp illuminated in the Instrument Panel Cluster (IPC). This bulletin involves reprogramming the PCM with the latest available software.

Park Lock Piston Leaking Customers may comment on the following: SYMPTOM: Power loss - jerking while driving that may result in the engine being unable to restart after a stop if fault code P0B0C 7A is present.

Oil Leak Through The Rear Crankshaft Oil Seal (Flywheel Side) Customers may comment on the following: Oil Pressure warning light illuminates. Engine oil is leaking onto the floor beneath the vehicle This bulletin involves inspecting for oil leaks and if necessary replacing the rear crankshaft oil seal (flywheel side)

1. Please follow the service procedure: 08-Electrical/8N - Power Systems/ Power Top, Sunroof/ Diagnosis and Testing. 2. If sunroof motors continue to be inoperative, please contact STAR and reference SET 1599. ***This should be done before trying to replace the sunroof motors.***

Noisy Timing Chain Tensioner Customers may experience the following: SYMPTOM: A metallic knocking noise coming from the timing chain area during engine operation. This bulletin involves replacing the timing chain tensioner.

illumination, and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): U0287-00 - Lost Communication With Transmission Fluid Pump Module 1. Customers must also comment on one or more of the following: The Engine Stop/Start (ESS) is disabled. Service Transmission message is displayed on the Instrument Panel Cluster (IPC). This bulletin involves replacement of the Transmission Electric Oil Pump and reprogramming the TCM with the latest available software

Whistle Noise From Engine Area Customers may comment on the following: SYMPTOM: Whistle noise from engine compartment.

Engine Will Not Start If Fault Code P0AA1-09 Is Present Customers may experience the following: The engine will not start with display of the message "Electric drive system fault" in the Instrument Panel Cluster (IPC) - if fault code P0AA1-09 is present.

Difficulty Fueling Fuel Tank Customers may experience the following: SYMPTOM: Difficulty fueling the vehicle. This bulletin involves inspecting the fuel tank inflow control valve and possibly the fuel tank.

Difficulty Fueling Fuel Tank Customers may experience the following: SYMPTOM: Difficulty fueling the vehicle. This bulletin involves inspecting the fuel tank inflow control valve and possibly the fuel tank.

Oil Leak Through The Rear Crankshaft Oil Seal (Flywheel Side) Customers may comment on the following: SYMPTOM: Oil Pressure warning light illuminates. Engine oil is leaking onto the floor beneath the vehicle. This bulletin involves inspecting for oil leaks and if necessary replacing the rear crankshaft oil seal (flywheel side).

High Pressure Fuel Pump Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0087-00 - Sensor De Presso Da Linha De Combustvel - Banco 1 - Presso Abaixo Do Limite. P0088-00 - Sensor De Presso Da Linha De Combustvel - Banco 1 - Presso Acima Do Limite. P0089-00 - Sensor De Presso Da Linha De Combustvel 1 - Desempenho. Customers may also comment on one or more of the following: Unstable idle. The engine is running rough. Partial loss of engine power. This bulletin involves diagnosing and possibly replacing the high-pressure fuel pump and the high-pressure tube.

High Pressure Fuel Pump Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0087-00 - Sensor De Presso Da Linha De Combustvel - Banco 1 - Presso Abaixo Do Limite. P0088-00 - Sensor De Presso Da Linha De Combustvel - Banco 1 - Presso Acima Do Limite. P0089-00 - Sensor De Presso Da Linha De Combustvel 1 - Desempenho. Customers may also comment on one or more of the following: Unstable idle. The engine is running rough. Partial loss of engine power.

Vehicle Will Not Start With Display Of The Message "Electric Traction System Fault" Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0BD8-11 - Drive Motor Inverter Temperature Sensor "D" Circuit Low. P0A78-01 - Drive Motor "A" Inverter Performance. P0AEF-11 - Drive Motor Inverter Temperature Sensor "A" Circuit Low. P10D3-41 - High Level Driving Power Transistor Of The Inverter Of The Electric Traction Machine - General Checksum Failure (Electric Machine Management ECU). Customers may also comment on one or more of the following: Vehicle does not start. "Electric Traction System Fault" message displayed in the Instrument Panel Cluster (IPC) This bulletin involves checking for DTCs and possibly replacing the traction electric machine inverter on the hybrid dualclutch automated manual transmission.

Significant Engine Braking The customer must describe the following: Significant engine braking when letting off the accelerator.

Difficulty Fueling Fuel Tank Customers may experience the following: Difficulty fueling the vehicle. This bulletin involves inspecting the fuel tank inflow control valve and possibly the fuel tank.

Knocking Noise From The Gearbox Customers may comment on the following: Knocking noise from the gearbox heard with the engine speed at idle or fast idle, when parking, in forward or reverse gear with a vehicle speed below 15 km/h (9 mph).

Oil Leak Through The Rear Crankshaft Oil Seal (Flywheel Side) Customers may comment on the following: Oil Pressure warning light illuminates. Engine oil is leaking onto the floor beneath the vehicle. This bulletin involves inspecting for oil leaks and if necessary replacing the rear crankshaft oil seal (flywheel side).

Coolant Temperature Sensor Malfunction Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): P0115-00 - Engine Coolant Temperature Plausibility Check. Customers may also experience the following: Engine overheating warning lamp indicator is illuminated on the Instrument Panel Cluster (IPC). This bulletin involves inspecting and possibly replacing the ECT sensor.

and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: **Oil Level High Warning in the Instrument Panel Cluster (IPC).** Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. Vehicle is not heating up fast enough at freezi

Fuel Injector Leak Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): **P1336-00 - Multiple Cylinder Misfire. P1337-00 - Cylinder 1 Misfire. P1338-00 - Cylinder 2 Misfire. P1339-00 - Cylinder 3 Misfire. P1340-00 - Cylinder 4 Misfire.** P0300-00 - Multiple Cylinder Misfire. P0301-00 - Cylinder 1 Misfire. P0302-00 - Cylinder 2 Misfire. P0303-00 - Cylinder 3 Misfire. P0304-00 - Cylinder 4 Misfire. Customers may also comment on one or more of the following: Unstable idle. Abnormal engine noise. , Diagnostic section, Repair Procedure, additional Claims Data Note, Special Tool and Reading Defects and Cleaning Procedure Of

High Pressure Fuel Pump Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0087-00 - Sensor De Presso Da Linha De Combustvel - Banco 1 - Presso Abaixo Do Limite. P0088-00 - Sensor De Presso Da Linha De Combustvel - Banco 1 - Presso Acima Do Limite. P0089-00 - Sensor De Presso Da Linha De Combustvel 1 - Desempenho. Customers may also comment on one or more of the following: **Unstable idle.** The engine is running rough. Partial loss of engine power. statement, LOPs, Repair Procedure, new Market Applicability Note, special tools, Consumable Table, Reading Defects (DTC) section and Injection System Cleaning Procedure. Revisions not highlighted with asterisks include removal of an engine Sales Code and build date. REPAIR SUMMARY: **This bulletin involves diagnosing and possibly cleaning the fuel injection system with an approved product and/or replacing the high-pressure fuel pump and the high-pressure tube.**

Methanol In Fuel - Diagnostic Trouble Code (DTC) P0171 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): P0171-00 - System Too Lean (Bank 1). Customers can also experience one or more of the following: Engine misfire. Rough engine idle. Difficulty starting engine. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.

Water In Fuel - Diagnostic Trouble Code (DTC) P0169 Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): P0169 - Incorrect Fuel Composition. Customers can also experience one or more of the following: Rough running engine (jerking). Unstable engine idle. Performance loss. Abnormal or excess engine noise. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.

Flash: Powertrain Control Module (PCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): P2002 - Diesel Particulate Filter Flow Resistance Monitoring Too High Level 2 Component Or System Operation Obstructed Or Blocked. Customers may also comment on the following: Oil change service light comes on at 15,000km (9,321 Miles). The actual maintenance interval for the Australian market is 20,000km (12,427 Miles). "DEF Low Refill Soon" message will appear in the Instrument Panel Cluster (IPC). Engine power output is lower than expected when applying the throttle. Engine not starting. Battery not charging. "Engine Oil Temperature High" message in the Instrument Panel Cluster (IPC). "Stop/Start Not Ready / Driver Seatbelt Unbuckled" message in the IPC Fig. 1. Vehicle will go to limp-in mode and will not go beyond 100 kmh (62 mph) speed.** ,

Engine Coolant Leak Through Water Pump Cover Customers may experience the following: Coolant is leaking This bulletin involves inspecting and, if necessary, replacing the water pump cover.

Confirm if coolant is visibly dripping from the weeper chamber. 2.Root Cause identification The weeper chamber is designed to collect small amounts of coolant (< 3 ml/h) that pass through the dynamic seal. Red traces or shadows around the chamber may appear during initial operation due to seal adaptation or vapor condensation. These traces are not necessarily signs of a leak. Continuous dripping of coolant, however, indicates a malfunction. 3.Service Repair Procedure Lift the vehicle using an elevator. Verify if coolant is actively dripping from the weeper chamber. Run the engine at idle, alternating speed between 2000 4000 rpm for 15 minutes. Observe the weeper chamber during this test: If coolant continues to drip: Replace the water pump (possible permanent damage to the dynamic seal). If dripping stops: No further action is needed; the vehicle can be returned to the customer. 4.Clarify Leak Sources Do not confuse leaks from: The Press-In-Place rubber gasket (between water pump and engine block), or The inlet pipe nipples with leaks from the weeper chamber.

Drivers Monitoring Module Manifold Absolute Pressure (MAP) Sensor Not Installed Properly Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P006D-00 - Barometric Pressure - Inlet Air Pressure Correlation. P012C-00 - Turbocharger/Supercharger Inlet Air Pressure Sensor 1 Circuit Low. P012D-00 - Turbocharger/Supercharger Inlet Air Pressure Sensor 1 Circuit High. P1189-00 - Inlet Air Pressure Sensor Circuit Low. P1190-00 - Inlet Air Pressure Sensor Circuit High. This bulletin involves measuring the distance between the lower base of the MAP sensor and the surface of the intake air line and, if required, replacing the MAP sensor.

Brake Warning Lamp On Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): C1215-86 - Brake Light Switch - Signal Invalid. Customers may comment on one or more of the following: "ABS" warning displays on the Instrument Panel Cluster (IPC). Excessive force required when depressing the brake pedal when trying to start the engine This bulletin involves inspecting the brake pedal switch pressure and possibly performing a reseating of the brake pedal switch

Brake Warning Lamp On Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): C1215-86 - Brake Light Switch - Signal Invalid. Customers may comment on one or more of the following: "ABS" warning displays on the Instrument Panel Cluster (IPC). Excessive force required when depressing the brake pedal when trying to start the engine. This bulletin involves inspecting the brake pedal switch pressure and possibly performing a reseating of the brake pedal switch

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0032-00 - Comando Do Aquecedor De Sonda Lambda Pr-catalisador - Circuito Alto. P0133-00 - Sonda Lambda Pr-catalisador - Resposta Lenta. P0171-00 - Sonda Lambda Pr-catalisador - Mistura Pobre. Customers may comment on one or more of the following: Engine power loss. Engine acceleration cuts out at times This bulletin involves possibly replacing the upstream oxygen sensor and reprogramming the PCM with the latest available software

Flash: Powertrain Control Module (PCM) Updates ustomers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0032-00 - Comando Do Aquecedor De Sonda Lambda Pr-catalisador - Circuito Alto. P0133-00 - Sonda Lambda Pr-catalisador - Resposta Lenta. P0171-00 - Sonda Lambda Pr-catalisador - Mistura Pobre. Customers may comment on one or more of the following: Engine power loss. Engine acceleration cuts out at times. This bulletin involves possibly replacing the upstream oxygen sensor and reprogramming the PCM with the latest available software.

Rear Main Crankshaft Oil Seal Leak Customers may comment on the following: **Oil Pressure warning light illuminates.** Engine oil leak. This bulletin involves inspecting for oil leaks and if necessary replacing the rear main crankshaft oil seal.

Brake Warning Lamp On Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): C1215-86 - Brake Light Switch - Signal Invalid. Customers may comment on one or more of the following: "ABS" warning displays on the Instrument Panel Cluster (IPC). Excessive force required when depressing the brake pedal when trying to start the engine This bulletin involves inspecting the brake pedal switch pressure and possibly performing a reseating of the brake pedal switch

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0032-00 - Comando Do Aquecedor De Sonda Lambda Pr-catalisador - Circuito Alto. P0133-00 - Sonda Lambda Pr-catalisador - Resposta Lenta. P0171-00 - Sonda Lambda Pr-catalisador - Mistura Pobre. Customers may comment on one or more of the following: Engine power loss. Engine acceleration cuts out at times. This bulletin involves possibly replacing the upstream oxygen sensor and reprogramming the PCM with the latest available software.

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0032-00 - Comando Do Aquecedor De Sonda Lambda Pr-catalisador - Circuito Alto. P0133-00 - Sonda Lambda Pr-catalisador - Resposta Lenta. P0171-00 - Sonda Lambda Pr-catalisador - Mistura Pobre. Customers may comment on one or more of the following: Engine power loss. Engine acceleration cuts out at times. This bulletin involves reprogramming the PCM with the latest available software and possibly replacing the upstream oxygen sensor. This bulletin involves reprogramming the PCM with the latest available software and possibly replacing the upstream oxygen sensor.

thermostatic valve This bulletin involves inspecting and, if necessary, replacing the thermostatic valve gasket"

must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C2260-63 - ECU Internal Performance - Circuit Component Protection Time-Out Customers may also comment on the following: Service 4WD indicator is illuminated.

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P0176 - Falha na calibrao do sensor de etanol. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.

Direct Voltage Transformer ECU Fault Code P0606-48 Technicians may experience the following: Fault code P0606-48 in the direct voltage transformer ECU.

cold air when set to full cold setting This bulletin involves reprogramming the HVAC module with the latest software.

illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): C14A4-00 - Sensor Adjustment Required. Customers may also experience the following: "ACC/FCW Unavailable, Service Required" message in the Instrument Panel Cluster (IPC). This bulletin involves reprogramming of the ACC module with the latest available software.

Flash: Adaptive Cruise Control (ACC) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Codes (DTC): C14A4-00 - Sensor Adjustment Required. Customers may experience the following: "ACC/FCW Unavailable, Service Required" message in the Instrument Panel Cluster (IPC). This bulletin involves reprogramming the ACC with the latest available software.

Monitoring System functions with a steering wheel angle sensor fault (U053B 81, B2EF8 9E, U1205 81), present in several ECUs.

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Rain Sensor Internal Failure.

Rain Sensor Internal Failure.

Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): B1E21-96 - Backup Battery Component Internal Failure.

the radio: "Battery of Uconnect Box requires service. SOS call and related functions may be unavailable. Please visit an authorized dealer." PLEASE do not Replace the TBM module, only replace TBM Internal Battery (inside Telematics Box Module) and order PN68493347

Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): B1E21-96 - Backup Battery Component Internal Failure

Collision Warning And Lane Keep Assist Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): B178F-15 - Turn Signal Switch-circuit Short To Battery Or Open. B1051-15 - Column Switch Module Turnlights - Circuit Short To Battery Or Open. Customers may also comment on the following: The collision warning light and lane-keeping light Fig. 1 illuminate on the Instrument Panel Cluster (IPC) when the steering wheel is turned. NOTE: There are no other abnormal behaviors in the vehicle due to this concer This bulletin involves replacing the signal lever assembly.

Current controls are not robust against depleted auxiliary battery condition. Please follow SOL S2508000031.

Current controls are not robust against depleted auxiliary battery condition. Please follow SOL S2508000031.

R1H Radio Update to U41.17 - Dealer Option Customers may experience one or more of the following: SYMPTOM: The Embedded Navigation application does not recognize voice commands in Spanish. The infotainment system intermittently reboots automatically. NOTE: Rearview Camera (RVC) functions normally. This bulletin involves inspecting and if required, updating the radio software level to U41.17.

Navigation Stability - Android Auto & Carplay stability & connectivity- Distorted/glitchy display prior to startup animation- Text appearance display- Widget incorrect display- Turn signal blind spot response timing- Audio cut out - Drive Modes selection- Park assist Guidelines selction

R1H Radio USB Update to U41.17 Customers may experience one or more of the following: SYMPTOM: The Embedded Navigation application does not recognize voice commands in Spanish. The infotainment system intermittently reboots automatically. NOTE: Rearview Camera (RVC) functions normally. This bulletin involves inspecting and if required, updating the radio software level to U41.17.

R1H Radio USB Update to U41.17 Customers may experience one or more of the following: SYMPTOM: The Embedded Navigation application does not recognize voice commands in Spanish. The infotainment system intermittently reboots automatically. NOTE: Rearview Camera (RVC) functions normally. This bulletin involves inspecting and if required, updating the radio software level to U41.17.

Will Not Open/ Close. Liftgate/Hatch Ajar Message Displayed. Rev A

Cluster (IPC) when the turn-by-turn feature is enabled. This issue occurs when using Google Maps for Navigation via CarPlay

Cluster (IPC) when the turn-by-turn feature is enabled. This issue occurs when using Google Maps for Navigation via CarPlay

TBM Setting Stored Or Pending DTCs B22A9, B1560, B1561, B1562

the following: - Broken Telematic client connection. Customers are not able to connect to the broadcast servers nor able to enroll in AOTA features (connectivity Apps)

S2623000040.

Alignment Gap And Flush Customers may comment on the following: SYMPTOM: Misalignment of play and profile in the frontal region (hood, fender and bumper) and between side doors. This bulletin involves inspecting for an alignment issue with the hood, fenders and/or doors and aligning as necessary.

B Pillar Applique Rubber Molding Peeling Off Customers may comment on the following: Both rear door B Pillar applique rubber moldings are loose Fig. 1. This bulletin involves replacing both rear door B Pillar appliques.

(DTC) present: SYMPTOM: B251D1-00 - Universal Garage Door Opener Control. Customers may comment on the following: Operational questions regarding the usage of the HomeLink UGDO. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.

chatter/streak/jump/skip/smear or make noise while traveling across the windshield. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.

No Switching To Electric Mode The customer must describe the following: Vehicle not switching to electric mode.

Fluid Reservoir Is Full.

floor mats and cargo trays This bulletin involves inspecting and possibly supplying the customer's vehicle with the MOPAR Basic All Weather Package

layer of condensation on the SYMPTOM: inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.

Corner Radar Dynamic Alignment Calibration Issue Technicians must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ? B2EF9-78 - Alignment Of The Corner Radar

layer of condensation on the SYMPTOM: inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.

Turn Signal Lever Does Not Cancel Customers may comment on the following: Turn signal lever does not return or cancel This bulletin involves inspecting the turn signal lever and possibly replacing it.

Turn Signal Lever Does Not Cancel Customers may comment on the following: Turn signal lever does not return or cancel. This bulletin involves inspecting the turn signal lever and possibly replacing it.

Turn Signal Lever Does Not Cancel Customers may comment on the following: Turn signal lever does not return or cancel. This bulletin involves inspecting the turn signal lever and possibly replacing it.

lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*

Turn Signal Lever Does Not Cancel Customers may comment on the following: Turn signal lever does not return or cancel. This bulletin involves inspecting the turn signal lever and possibly replacing it.

Turn Signal Lever Does Not Cancel Customers may comment on the following: Turn signal lever does not return or cancel. This bulletin involves inspecting the turn signal lever and possibly replacing it.

Fault Code P120F-00 Present In Hybrid The vehicle may illuminate the Malfunction Indicator Lamp (MIL) and the vehicle may exhibit/set the SYMPTOM: following Diagnostic Trouble Code (DTC): P120F-00 - Supplier Fault Code (Hybrid Dual Clutch Transmission Module).

Gear Changing Issue The customer must describe the following: SYMPTOM: Poor driveability/shifting when changing from sixth to seventh gear.

Time To Change From Reverse Gear To Drive Gear Excessive Customers may experience the following: Perceived shift delay between Reverse and Drive This bulletin provides information regarding perceived excessive time to shift between different driving gears.

Whining Noise From The Transmission Whining noise from the transmission

Flash: Transmission Control Module (TCM) Updates Customers may comment on the following: Possible undershoot during a 5-4 gear downshift while braking This bulletin involves inspecting and possibly reprogramming the TCM with the latest available software

Do not replace RDM for NVH issue.

Flash: Drivetrain Control Module (DTCM) Updates Customers may experience the following: SYMPTOM: Vehicle does not start due to a depleted battery. This bulletin involves inspecting and possibly reprogramming the DTCM with the latest available software.

Flash: Anti-Lock Brakes (ABS) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC) in the ABS module: C120E-29 - Vacuum Sensor Failure - Invalid Signal. Customers must also comment on one or more of the following: Lower brake pedal sensation. Vibration from the brake pedal. This bulletin involves reprogramming the ABS module with the latest available software.

Flash: Anti-Lock Brakes (ABS) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC) in the ABS module: C120E-29 - Vacuum Sensor Failure - Invalid Signal. Customers must also comment on one or more of the following: Lower brake pedal sensation. Vibration from the brake pedal. This bulletin involves reprogramming the ABS module with the latest available software.

vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): C10D0 - Electronic Park Brake System Failure. C10EA - 01 Left Park Brake Actuator - General Electrical Failure. C10D0 - 4B Electronic Park Brake Module - Over Temperature. C10D0 - 92 Electronic Park Brake Module-Performance or Incorrect Operation. C10D0 - 9A Electronic Park Brake Module-Component or System Operating Conditions. C2222 - 68 Improper Power Down-Event Information. U2006 - 64 EPB Status - Signal Plausibility Failure. NOTE: The above DTCs will only occur when there has been wire damage. Repair the damage following published repair methods. Submit repair claims following standard Warranty repair methods. Customers may also experience one or more of the following: 'Service Electric Park Brake' message on in Instrument Panel Cluster (IPC). Multiple warning lamps on. Vehicle does not start. This bulletin involves inspecting and possibly rerouting and securing a wiring harness.

Front Passenger Seat Customers may comment on the following: SYMPTOM: Front passenger side seat heating is not working. This bulletin involves adding felt inside the foam pad of the front passenger seat.

Front Or Rear Shock Absorber Noise Customers may experience the following: A squeaking, squealing or whistle noise coming from the front or rear shock absorbers when driving over uneven surfaces This bulletin involves inspecting and possibly replacing one or more, front or rear shock absorbers.

coming from the front shock absorbers while driving on uneven surfaces. This bulletin involves inspecting and possibly replacing the one or both front shock absorbers.

Electronic Park Brake Switch LED- C10CD-01 Electronic Park Brake Switch-General Electrical Failure 1. Confirm customer's concern 2. If the DTCs come as STORED, clear them prior to performing any service steps. If the DTCs come as ACTIVE 3. Check that the battery connectors are properly seated as well as the ground connector. 4. Try disconnecting the battery for 5min to reset the module. 5. If the issue with the EPB is still present and there are ACTIVE DTCs, check for any loose connection at the Park Brake Switch or Brake System Module BEFORE replacing the Switch. If after disconnecting the switch and the module, any DTC goes from ACTIVE to STORE, clear them and do not replace the switch. 6. If after following steps 1 to 5 the Park brake switch is not working, replace the switch. Note: If there is any other DTC are present, review Brake System Module BEFORE replacing the switch. C10EA-00 Left Park Brake Actuator- C10EC-00 Park Brak Actuator Correlation C10EB-00-RIGHT PARK BRAKE ACTUATOR

Power surge on USB hub detected Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle.

Power surge on USB hub detected Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle

Power surge on USB hub detected Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle

57008681AC: EXHAUST - RESONATOR of 2024 2025 MP GMET4 2.0L: Cold Start Exhaust BSR / Popping / Tapping Noise issue, please refer to this SOL S2511000002

Low Efficiency Air Conditioning The customer may comment on the following: Air conditioning provides insufficient cabin cooling. This bulletin involves performing an inspection and possibly replacing the evaporator piping to intermediate connection.

Low Efficiency Air Conditioning The customer may comment on the following: Air conditioning provides insufficient cabin cooling. This bulletin involves performing an inspection and possibly replacing the evaporator piping to intermediate connection.

Order a "Z" part number for all Exchange Orders: Warranty, Mopar, Customer pay and Service contract. Order"68" part number for New unsold units only