2007 International Durastar TSBs
217 Technical Service Bulletins across 15 categories
Categories
Other
48 bulletinsThis document will guide the user through understanding Prop Shaft Codes and understanding the variations of prop codes.
Read full bulletin
(Metric Prop codes start with the number a 4 and Non metric Prop codes start with a 2.)
Title: Driveline Information Center and Troubleshooting Procedures Applies To: All Vehicles
Title: Fan belt replacement guidelines for frayed edges Applies To: All Models
J1939 Data Link Source Address Information
Diagnosis of chassis wander complaints.
J1939 Data Link Source Address Information
J1939 Data Link Troubleshooting
J1939 Data link source address information
Pico Scope CCOS (Crankcase Separator Test)
PicoScope Test One Channel RCT
PicoScope Test Resistance and Ohmmeter
PicoScope Test for Datalink (CAN) Health Shorts & opens
J1939 Data Link Source Address Information
J1939 Data Link Troubleshooting
Cab Lean Concern
Driveline Information Center and Troubleshooting Procedures
Cleaning and Disinfecting Trucks and Buses
J1939 Data Link Troubleshooting
How To Get A Helios Capture; only 1939 and 1708 multiplexed buses and trucks
Wiper Troubleshooting
J1939 Data Link Source Address Information
Driveline Information Center and Troubleshooting Procedures
Programing New Key Fobs
Medium duty cole weather operation / solid winter front; EXCLUDING High Cab DuraStar
Dash Cluster Stuck in one mode
Transfer case troubleshooting
Ethylene Glycol Coolant Color Change to be Phased-In Approximately April 1, 2004
To Get A Helios Capture; All 1939 and 1708 multiplexed trucks only
J1939 Data Link Troubleshooting; Only Models with 250k Baud Data Link (Black 9 Pin Diagnostic Connector)
J1939 Data Link Troubleshooting
NEW Ultrasonic DEF Tank Sending Unit; only models with SCR Aftertreatment system.
J1939 Data Link Troubleshooting
Retrieving Fault Codes Through the Cluster Doesn?t Work
Cooling System Flush Procedure
J1939 Data Link Source Address Information
J1939 Data Link Troubleshooting
Updating OnCommand Link with Accelerator
OnCommand EZ-Tech
Winter Front Usage
ISX, N13, and N9 / N10 Aftertreatment Private Data Link Troubleshooting
J1939 Data Link Troubleshooting
OnCommand EZTech
OnCommand EZ-Tech Download Center
Cluster Issues
1939 Data Link Troubleshooting
Cup Holder
Transfer case troubleshooting; Only vehicles equipped with Transfer case
RADIATOR INTERNAL RESTRICTION AND FLUSH PROCEDURE
Engine
32 bulletinsEngine replacements for all International engines will need to follow this procedure.
In some geographic areas, ambient temperatures reaching below 15F (-10 C), including high levels of humidity, an...
Read full bulletin
operator may experience engine stalling, low performance, and or poor aftertreatment performance. This is caused by condensation accumulating and freezing within the Charge Air Cooler (CAC); affecting air flow into the engine. This article lists all the currently available winter front covers that can be installed on the front grille and bumper to reduce cold air flow to the engine compartment.
Title: Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure Applies...
Read full bulletin
To: All Navistar Powered Trucks Requesting Engine Emission Label Replacement, Certificate of Conformance and/or Clean Idle Sticker, Clean Truck Check
Title: How to Request a Horsepower Quote Applies To: All International and Cummins Electronic engines
Applies To: All Navistar Powered Trucks Requesting Engine Emission Label Replacement, Certificate of Conformance and/or...
Read full bulletin
Clean Idle Sticker, Clean Truck Check
Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or...
Read full bulletin
PSI engine.
How to request a horsepower quote; all International and Cummins engines
Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI...
Read full bulletin
engines or Cummins ISB engine with Allison transmissions
Calculating pulses per mile (speedometer setting); only models equipped with International engines
ECM Calibration for DPF Replacement; Applies to MaxxForce Engines
Engine Oil Capacities.
Read full bulletin
All International electronic engines 1994 to present and Cummins ISB, ISM, or ISX engines
ECM Calibration for DPF Replacement; only trucks and busses built with 2007- 2009 MaxxForce DT/9/10.
Read full bulletin
2010-2012 MaxxForce DT/9/10, 2007-2009 MaxxForce V8, 2008-2009 MaxxForce 11/13 engines
Converting 4000 4 X 2 HPV Models with Hydraulic ABS Brakes to 4 X 4 Configuration may Increase Stopping Distance and is...
Read full bulletin
Not Approved by International Truck and Engine Corporation and Merritor Wabco
Oil Capacities; All Electronic International Engines 1994 - Present.
Read full bulletin
Cummins ISB, ISM & ISX
Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure
Engine Oil Capacities All Electronic International Engines 1994 - Present.
Read full bulletin
Cummins ISB, ISM & ISX
Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure; only Navistar...
Read full bulletin
Powered Trucks
ECM recalibration and cleaning of the diesel oxidation catalyst (DOC) to Prevent possible Diesel Oxidation Catalyst...
Read full bulletin
(DOC) face plugging resulting in excessive fuel dilution of the engine oil. Retired
Aftertreatment Resource Center; All models equipped with EPA 2007 and newer engines
Open Breather Kit Installation and Turbo Charger Cleaning Instructions
Remote Engine Speed Control Module (RESCM) Troubleshooting; Only trucks equipped with RESCM
Water In Fuel (WIF) Message Blinking in Dash Message Center at Key On; only models with International Engines
Threaded Drain Hole In DPF (Muffler); only trucks equipped with CAT 2007 Emission Engines
Allison Transmission Not Pre-selecting with Engine/Exhaust Brake; Only with Allison Transmission
Remote Throttle Control Options for Vehicles with ESC?s or Body Controllers and International Engines
Urea Quality Sensor (UQS) Supplemental Diagnostic and Service Information; only models with SCR Aftertreatment system...
Read full bulletin
and N9, N10, N13, A26 or Cummins ISB, ISL, ISX engines built from January 2016
The fire extinguishers may become clogged or require excessive force to activate.
Read full bulletin
In certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. Only equipped with Kidde model FC5 and FC10 fire extinguishers identified by International part numbers 1696423C2 and 1696423C3 and installed post production at Navistar?s Truck Sales Processing Center (TSPC).
Engine Oil Capacities
CPA Injector Misfire Detection; Only models with 2004 thru 2017 International engines.
Cylinder Performance Analyzer (CPA) Resource Center; Only models with 2004 thru 2017 International engines.
Front Blower Motor Runs Breifly At Initial Power Up
REMOTE ENGINE SPEED CONTROL MODULE (RESCM) TROUBLESHOOTING
Body & Paint
32 bulletinsThis article addresses chassis lean conditions on all chassis.
Read full bulletin
This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
Cab water leak troubleshooting tips; HX with steel cab only
Aftertreatment Clamp Corrosion; Single Can Aftertreatment Systems
Power Windows Stop Randomly or are Inoperative, Power Door Locks are inoperative
Updating Body Controller Software
Hood Adjustment
Mirror Repair Procedures and Replacement Parts Availability
Power Windows Stop Randomly or are Inoperative, Power Door Locks are inoperative
Wind noise at upper side of cab door
Vehicle Speed ( VSS ) Output for Bodybuilders
Headlight Operation and Troubleshooting; only Post 2007 Vehicles Built with a Body Controller
Body Controller Resource Center
Water entry into the cab / Adding Cowl tray seal; models built prior to 11/11/2013
Mirror Repair Procedures and Replacement Parts Availability; only models with Lang Mekra Mirrors
Power Windows Stop Randomly or are Inoperative, Power Door Locks are inoperative
Power Windows randomly stop
Power Windows Stop Randomly or are Inoperative, Power Door Locks are inoperative
Power Windows Stop Randomly or are Inoperative, Power Door Locks are inoperative
Headlight Condensation or Frost; excludes sealed beam headlights such as on WorkStar, Paystar and 9900i)
Mirror Repair Procedures and Replacement Parts Availability
Body Controller/ESC Software Updates
City Horn Blows When Driver Shuts off Truck and Walks Away; only equipped with with ESC or Body Controller
Mirror Repair Procedures and Replacement Parts Availability
Wipers and Aftertreatment Lights Inop on Post 2007 Trucks with Body Controller
Mirror Repair Procedures and Replacement Parts Availability
The First Check to make when Troubleshooting any Body Controller or ESC Issue
Headlight Condensation or Frost; excludes sealed beam headlights such as on WorkStar, Paystar and 9900i)
Windows Stop Randomly or are Inoperative, Power Door Locks are inoperative
Wind noise at upper side door
WIND NOISE AT UPPER SIDE DOOR
COWL TRAY SEAL; ONLY BUILT PRIOR TO 11/11/2013
MIRROR REPAIR PROCEDURES AND REPLACEMENT PARTS AVAILABILITY
Brakes
29 bulletinsThis document will guide the user through a step-by-step procedure for detecting water leaks in vehicle cabs and...
Read full bulletin
windshields using an ultrasonic sound detector.
This document is to guide users to eliminate brake pedal rattle noise.
WABCO Full Power Brake Diagnostic Code (DTC) Index
How to program parameters after changing WABCO FPB ECU (Parking brake shows N/A)
Bendix EC80 Blank Module Replacement Program; This document will guide the user through selecting the correct ABS module...
Read full bulletin
when it has been determined a replacement is needed. Only Models with EC-80 ABS Controller
Wabco FPB/Quadraulic Brake Uneven Wear
Proper Brake Bleeding Procedure For Vehicles With Wabco Full Power Brakes; only models with Wabco Full Power Hydraulic...
Read full bulletin
Brakes
Air Powered (SAAR) Park Brake Troubleshooting (Service "P" Light Coming on).
Read full bulletin
Only models with hydraulic brakes
Brake Lights Staying On
Brake Light Operation; only models equipped with Meritor Wabco Full Power Brakes
Air Powered (SAAR) Park Brake Troubleshooting (Service "P" Light Coming on); only models with Wabco Full Power Hydraulic...
Read full bulletin
Brakes
General Air Brake Plumming Schematic
Wabco Toolbox Error Message When Downloading Wabco File; only models equipped with WABCO Full Power Brakes.
2007 and Newer Brake Light Operation; only equipped with Air Brakes
How to Program Parameters After Changing a WABCO FPB ECU ( Park Brake Shows NA ); only models equipped with WABCO Full...
Read full bulletin
Power Brakes
Hydraulic Brake System Park Brake Inspection and Adjustment Procedures; only models with Hydraulic Brake system equipped...
Read full bulletin
with 04GBJ Park Brake
Brake Lights Staying On
Brake Light Operation on HPV with Full Power Brakes; only models equipped with Meritor WABCO Full Power Hydraulic Brakes
Wabco Hydraulic Power Brake cap/grounds diagnostics and repair procedure
Wabco FPB/Quadraulic Brake Uneven Wear
Air Powered (SAAR) Park Brake Troubleshooting - Service "P" Light Coming on
General Air Brake Plumming Schematic
Wabco Full Power Hydraulic Brake Diagnostic Code (DTC) Index
Air Powered (SAAR) Park Brake Troubleshooting (Service "P" Light Coming on)
How to Program Parameters After Changing a WABCO FPB ECU ( Park Brake Shows NA )
Wabco FPB/Quadraulic Brake Uneven Wear
Chassis with Quadraulic Brakes; Quadraulic Brake Pads
Adding an Electronic Trailer Brake Controller
BRAKE LIGHT OPERATION; ONLY EQUIPPED WITH FULL POWER BRAKE SYSTEM
Electrical
19 bulletinsThis document provides: Steps to take when switch pack programming fails, or when switch pack disappears after body...
Read full bulletin
control module update Sample scenarios Additional information to assist readers in understanding DLB switch pack programming
General Wheel Speed Sensor Troubleshooting
PicoScope Test - Battery Loss of Charge - Parasitic Draw Test
PicoScope Test 5V & 12V Intermittent Open and Short circuit diagnostics
Dual Drive Cab Throttle Position Harness for APS/IVS throttle pedals; only models with both left hand and right hand...
Read full bulletin
drive.
General wheel speed sensor troubleshooting
Codes 141, 142, and 621 in a 2-box ECM/IDM; only models with 2-box ECM/IDM from 2003-2007
Dual Throttle Pedal Harness Troubleshooting; only models with Dual Throttle Harness and Switch Installed.
Dual Drive Cab Throttle Position Harness for Converting Models to both Left and Right Hand Drive
BlindSpotter Wired to Battery Power; only models with feature code 08TSB and built between 11/23/2016 and 11/12/2018
Tool Instruction - BCM Programming Harness
Dual Throttle Pedal Harness Troubleshooting; only Models with Dual Throttle Harness and Switch Installed
Remote Power Module (RPM) Troubleshooting
How to Add Lift Gate Battery Protection; only models equipped with Electronic System Controller (ESC) or Body Controller...
Read full bulletin
(BC).
Location of 1000 OHM Resistor In the HVAC Wiring
HVAC fault 2609-19 with 4th Gen BCM; Only models equipped with 4th generation BCM
Remote Power Module (RPM) Visual Inspection Guidelines
Remote Power Module (RPM) Visual Inspection Guidelines
Remote Power Module (RPM) Visual Inspection Guidelines
HVAC & Climate
11 bulletinsTitle: A/C Refrigerant and Oil Capacities Applies To: All current models
A/C Refrigerant and Oil Capacities
Air Pressure Gauges and A/C Pressure Transducer Troubleshooting
Air Pressure Gauges and A/C Pressure Transducer Troubleshooting
A/C Refrigerant and Oil Capacities
HVAC faults 520211 and 520465; only Models with Body Controllers
A/C Refrigerant and Oil Capacities
Body Controller Software Revision 231 HVAC Improvements for Post 2007 ProStar, DuraStar, TranStar Only
HVAC faults 520211 and 520465
BODY CONTROLLER SOFTWARE REVISION 231 HVAC IMPROVEMENTS; POST 2007 MODELS ONLY
AIR PRESSURE GAUGES AND A/C PRESSURE TRANSDUCER TROUBLESHOOTING
Transmission
9 bulletinsTitle: Steering Gear Seal Repair Guidelines Applies To: Steering gears
Power Steering Diagnostics Flow / Pressure Specifications For Power Steering Gears and Power Steering Pumps
Manual Shift Lever Jumps Out of Gear; built during specific build dates noted in document
Transmission Upshifting too Fast; Only with Allison Gen 4 LCT (1000 and 2000 series) Transmission
Transmission Control Module Relocation; only with Allison WT Gen 3 Transmission
Roll Pins Backing Out of Bell Crank; Only with manual transmission
Allison Transmission with Auto Neutral Feature Won?t Shift Back into Gear When the Parking Brake is Released; only with...
Read full bulletin
Allison MD Transmission and Auto Neutral Feature 13AAZ and 13WUA
Transmission Jumping Out of Gear; manual transmission only
New Synthetic Oil for Eaton and Spicer Transmissions; only with Eaton or Spicer transmissions
Fuel System
8 bulletinsDual Fuel Tank Transfer Pump Troubleshooting
Fuel Transfer Pumps May be Installed Backwards; only vehicles built at Garland Assembly Plant between 05/22/07 and...
Read full bulletin
11/20/07
Dual Fuel Tank Transfer Pump System With Two Wire Pump Troubleshooting; Only models built with Feature Code: 595192
How to Change From a 5 Wire Fuel Transfer Pump to a 2 Wire Fuel Transfer Pump
DPF Snap Accel Test - Quick Test to All vehicles with DPFs
Dual Fuel Tank Transfer Pump Troubleshooting on Post-2007 NGV and ProStar
Dual Fuel Tank Transfer Pump System With Two Wire Pump Troubleshooting; equipped with feature 595192 built after...
Read full bulletin
08/19/2002
MaxxForce 7 Fuel Dilution Diagnostics
Suspension
7 bulletinsThis document reminds technicians of the critical relationship between the truck's suspension and the driveline operating angles.
Read full bulletin
The information applies to diesel, gas, and electric vehicles.
Front cab mount bushings/insulators MV, HV, DuraStar, and WorkStar vehicles used in severe vocations
Suspension Lean Diagnostics; All models
Front Spring Bolt Hitting Coolant Pipe on DuraStar and WorkStar Models built with feature 12WYK; only models built prior...
Read full bulletin
to 05/22/2007
Suspension Dump; only models with programming feature 595ACA (Suspension Dump).
Cab Air Suspension Ride Height Measurement and Adjustment
8,000 LBS Front Suspension Lean Correction
Lighting
5 bulletinsRepair Procedures for Vehicles Struck by Lightning
Headlight Housing Moisture Dissipation (TSI 070804); only models built 05/03/2007 and before
Repair Information for Damaged Headlight Connector
Trailer Auxiliary Switch Lamp Burning Out; Only Vehicles Equipped with Feature Code 0008TTH or 0008THG
Repair Information for Damaged Headlight Connector
Tires & Wheels
4 bulletinsThis article describes how to fix a speedometer that does not read accurately.
Read full bulletin
An inaccurate speedometer can be caused by changing the tire size, changing rear axle ratio (RAR), or by parameters being inadvertently changed during a programming event. Use the formulas and calculator below to correct the pulses per mile (PPM).
Suggested alignment target values when performing a vehicle axle alignment.
Suggested alignment target values when performing a vehicle axle alignment
Suggested alignment target values when performing a vehicle axle alignment
Infotainment
4 bulletinsThis tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files.
Read full bulletin
It allows users to quickly load files either manually or directly from the Diamond Logic Builder Vehicles folder using VIN-based selection. As files are added or removed, the comparison runs automatically with no manual action required. The program presents results in an interactive table that shows feature codes, descriptions, access levels, and whether each feature is present in each selected file. Built-in search, filtering, and sorting make it easy to locate specific features or focus only on differences between files. Column visibility can be customized to show or hide descriptions and access information as needed. Users can remove files individually or clear all files at once, with results updating instantly. The tool also includes reporting and export options that reflect exactly what is visible on screen, allowing results to be printed, copied, saved as text, or exported to CSV for use in Excel or other spreadsheet tools. Overall, the program streamlines the process of comparing vehicle feature configurations, helping users quickly identify differences, validate setups, and document results without manual comparison or external tools.
Radio Diagnostics and Information
Asterisk in Lower Right Quadrant of Dash Display
RADIO DIAGNOSTICS AND INFORMATION
Steering
4 bulletinsAdjustment Procedure for Tilt Only Steering Column; only models with Feature code 0005708
Steering Fluids
Steering Shake, Shimmy, Shudder, or Steering Vibration; only with 14k front weight rated axles and below
Lubrication to the Intermediate Steering Column Upper U-Joint
Software & Calibration
3 bulletinsCluster Software Update Instructions
Using Supplier Software to Check DTCs
Dealer EZ-Tech and Diagnostic Software Support Resource Center
Pre-Delivery & Maintenance
2 bulletinsTitle: Service Portal iKNow Feedback Case Types Applies To: All
Frame Rail Straightness Inspection Procedure