2019 Indian FTR1200 TSBs

2019-2025 Indian FTR motorcycles.

2019-2024 Indian FTR 1200 motorcycles.

your Indian FTR Motorcycles.

on Indian FTR motorcycles.

Indian FTR Motorcycles.

Year 2019-2024 FTR motorcycles.

coolant junction resulting in coolant loss during operation. If this occurs, coolant may come in contact with the rider, posing an injury hazard and/or coolant may come in contact with the rear tire, posing a crash hazard. To address this concern, Indian Motorcycle has released this safety recall with instructions to replace the coolant junction with an improved part.

coolant junction resulting in coolant loss during operation. If this occurs, coolant may come in contact with the rider, posing an injury hazard and/or coolant may come in contact with the rear tire, posing a crash hazard. Indian Motorcycle is currently evaluating a repair procedure for this concern and will provide an update to dealers in the coming weeks.

or the vehicle harness if the battery ground cable and ground joint is not connected properly. Damage can occur during procedures that require the battery cable to be disconnected or during battery removal and installation.

additional UV protection as well as scratch and damage resistance.

concerns about correct odometer value.

Through product design, dedicated safety engineering, and increased consumer awareness, Polaris continues to work toward a safe riding experience and proper operation of our products. The following information can be used to help identify and report Product Safety Concerns.

ABS module.

This communication will be updated with additional information as soon as its available.

It is critical for expedient and accurate diagnosis of a motorcycle, to identify and disclose all existing modifications to Indian Technical Service. Use of aftermarket components can create operating characteristics and sensor feedback that do not align with factory parameters. These cases can send our technicians down the wrong path and result in longer diagnostic time and a poor customer experience.

Emissions Control Information (VECI) decal that was printed with a typographical error which reads Permeation Family KIDNPMETALR1 instead of KIDNPP203BR1. No action is required on the part of the consumer.

protectors to vehicles with Ride Command.

This bulletin provides coverage to install screen protectors to vehicles with Ride Command.

plausibility faults, improves traction control calibration, and shortens engine warm-up time to improve cold start performance.

The version has been translated into French.

later requires dealers to enter a valid 10-digit Digital Wrench serial number to operate the app. The serial number requirement has been added to improve visibility to app downloads and usage.

times in the ownership experience. To ensure that all Polaris dealers are equipped to deliver a world-class experience that matches the high quality and excitement of the products, PCDX was developed to create a mobile streamlined dealership delivery experience. PCDX combines the setup, registration, and delivery process into one easy to use application.

PCDX training.

COMMAND on 2019-2022 Indian FTR models.

Updating to version 4.0 is required to update the base Digital Wrench software version from 3.9 to 4.0 to allow for future MY19 vehicle support.

The interface walks the dealer and the customer through a standardized online form that includes the PDI (pre-delivery inspection), general warnings, assembly and inspection, safety bulletins, test ride, customer information, customer walkaround and discussion, and customer acceptance. This application has been proven in dealerships to automate document retention, streamline vehicle setup, and provide a consistent, professional customer experience. Vehicles shipped after 11/1/2015 no longer include a paper PDI form with the vehicle setup material; instead dealers should complete the vehicle setup and PDI using the PCDX application, which can be located on the Dealer Website under Service and Warranty PCDX.