2015 Indian Chief Dark Horse TSBs
21 Technical Service Bulletins across 3 categories
Engine
19 bulletinsIndian Motorcycle identified that on Indian Scout Models there is a potential for damage to occur to electrical hardware...
Read full bulletin
or the vehicle harness if the battery ground cable and ground joint is not connected properly. Damage can occur during procedures that require the battery cable to be disconnected or during battery removal and installation.
EFFECTIVE IMMEDIATELY: STOP SALE on affected motorcycle(s) identified in your inventory until further notice.
Indian Motorcycle has determined that some 2014-2020 FullSize (111 c.i.
Read full bulletin
/ 116 c.i.) and 2020 Challenger models sold in Japan show compliance concerns due to operating range frequency of key fob, Vehicle Control Module (VCM) or Wireless Control Module (WCM), and Tire Pressure Monitor System (TPMS). Mentioned devices operate in restricted in Japan frequency of 433Hhz.
Indian Motorcycle has determined that some 2014-2020 FullSize (111 c.i.
Read full bulletin
/ 116 c.i.) and 2020 Challenger models sold in Japan show compliance concerns due to operating range frequency of key fob, Vehicle Control Module (VCM) or Wireless Control Module (WCM), and Tire Pressure Monitor System (TPMS). Mentioned devices operate in restricted in Japan frequency of 433Hhz.
Indian Motorcycle has identified a potential calibration issue affecting some 111/116 c.i.
Read full bulletin
motorcycles. When active, the P1530 fault causes the motorcycle to operate in a reduced power (limp) mode.
This Team Tip has been released by Indian Motorcycle to provide information regarding odometer maintenance and address...
Read full bulletin
concerns about correct odometer value.
Indian Motorcycle has determined the gear position switch used on 2014-2019 (111 c.i.) motorcycles may provide an...
Read full bulletin
inaccurate signal, which can lead to an incorrect gear being displayed. Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear. Incorrect gear indication during start-up can increase the risk of a crash.
Indian Motorcycle has determined the gear position switch used on 2014-2019 (111 c.i.) motorcycles may provide an...
Read full bulletin
inaccurate signal, which can lead to an incorrect gear being displayed. Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear. Incorrect gear indication during start-up can increase the risk of a crash.
Indian Motorcycle has determined the gear position switch used on 2014-2019 (111 c.i.) motorcycles may provide an...
Read full bulletin
inaccurate signal, which can lead to an incorrect gear being displayed. Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear. Incorrect gear indication during start-up can increase the risk of a crash.
Indian Motorcycle is actively investigating a potential concern affecting 111 ci engines that have been equipped with...
Read full bulletin
the Thunder Stroke 116 ci Stage 3 Big Bore accessory kit. Investigation is currently planned to conclude by 5/7/18, and at that time this communication will be re-issued with additional information. In the interim, Big Bore Kits and vehicles equipped with kits should not be sold.
Indian Motorcycle has identified three separate calibration concerns currently affecting 2017 and 2018 full-size Indian Motorcycles.
Read full bulletin
The Indian Motorcycle engineering team has released updated ECM and cluster calibrations to correct these concerns. Gear Position Fault, Coil Driver Fault, and Battery Drain issues will all be resolved with this reflash. Refer to Team Tip I-17-11-01 for more details.
This Team Tip has been released to assist dealers when servicing vehicles that have, or are suspected to have, aftermarket (non-OEM) modifications.
Read full bulletin
It is critical for expedient and accurate diagnosis of a motorcycle, to identify and disclose all existing modifications to Indian Technical Service. Use of aftermarket components can create operating characteristics and sensor feedback that do not align with factory parameters. These cases can send our technicians down the wrong path and result in longer diagnostic time and a poor customer experience.
This Team Tip is designed to inform dealers about updated information regarding gear position switches for all 2014- 2019 Indian Motorcycle (111 c.
Read full bulletin
i.) models. Updated information has been added to the Service Manual to provide dealers with clear direction on how to properly maintain and service gear position switches. We have also updated the maintenance interval chart to include the inspection and cleaning of the gear position switch at 10,000 mile intervals.
2014-2018 Indian Motorcycles utilize Absorbent Glass Mat (AGM) batteries which are selected for their superior ...
Read full bulletin
vibration resistance, weight savings, and high output. This Team Tip is being released to provide the Indian dealer network with specific recommendations to help maintain and restore the AGM type batteries used in Indian Motorcycles.
This Team Tip is being released to provide dealers with an advanced understanding of Indian Motorcycle key fob...
Read full bulletin
operation, alarm compatibility, battery life expectations and troubleshooting. 2014-2016 Indian Chief, Chieftain and Roadmaster motorcycles utilize a keyless ignition system (Key Fob) for vehicle startup and operation. The Key Fob acts as a two-way transmitter which provides an authentication signal to the Vehicle Control Module (VCM) located on the motorcycle. When the Key Fob is detected, the ignition system is enabled and the motorcycle becomes operational.
This Team Tip has been released to clearly define Indian Motorcycles expectations when filing a warranty claim related...
Read full bulletin
to shipping and / or concealed crate damage. In the event that damage occurs during the shipping process, or that damage is concealed under the shipping bag, it is critical to adhere to the claim steps outlined in this communication. Following the guidelines explained below will expedite repairs and allow Indian Motorcycle to seek carrier reimbursement when applicable.
Indian Motorcycle has released a software update for some 2014-2015 Indian Classic / Vintage / Chieftain motorcycles to...
Read full bulletin
address customer concerns with Brake-Throttle Override (BTO) functionality. The BTO system will temporarily close the throttle plate and, in some cases, illuminate the Malfunction Indicator Lamp (MIL) if the brakes and throttle are applied at the same time while the vehicle is in motion. While this operation is normal, it is not always compatible with each individual riding style.
Updated information has been added to all Indian Motorcycle Service Manuals to provide dealers with clear directions when servicing the fuel system.
Read full bulletin
Be sure to reference the applicable Service Manual for the most accurate information.
This Team Tip identifies differences between crankcases used throughout Indian Motorcycle 111 C.I.
Read full bulletin
engine production, and introduces a new service crankcase for 2014-2020 models.
Other
1 bulletinBest practices for gauges, speedometers, and tachometers providing information regarding how to clean and maintain.
Read full bulletin
The version has been translated into French.
Pre-Delivery & Maintenance
1 bulletin579.5 Notices, Bulletins, customer satisfaction campaigns, consumer advisories, and other communications for the month...
Read full bulletin
of November 2015