2025 Hyundai Tucson TSBs

This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption Inspection & Repair Guidelines, or the latest revision.

This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.

return to the designated park position due to a loose wiper motor crank arm nut. At Hyundai, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, the warranty coverage for the Wiper Motor Crank Arm Nut under these conditions has been extended to 10 years/100,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.

park position due to a loose wiper motor crank arm nut. Hyundai is extending the warranty coverage for the wiper motor crank arm nut under this condition to 10 years / 100,000 miles from the date of original retail delivery or date of first use (whichever comes first) and is valid for original and subsequent owners. Follow the procedure in Technical Service Bulletin (TSB) 26-BD-007H to replace the wiper motor crank arm nut to address this condition.

park position due to a loose wiper motor crank arm nut. Hyundai is extending the warranty coverage for the wiper motor crank arm nut under this condition to 10 years / 100,000 miles from the date of original retail delivery or date of first use (whichever comes first) and is valid for original and subsequent owners.

park position due to a loose wiper motor crank arm nut. Hyundai is extending the warranty coverage for the wiper motor crank arm nut under this condition to 10 years / 100,000 miles from the date of original retail delivery or date of first use (whichever comes first) and is valid for original and subsequent owners. Follow the procedure in this bulletin to replace the wiper motor crank arm nut to address this condition.

operation of the cooling fan after vehicle ignition has been turned off, potentially resulting in a no-start condition. The continuous cooling fan operation is caused by a stuck relay in the engine room PCB block. This bulletin provides instructions to replace the engine room PCB block to ensure the proper operation of the cooling fan.

lamp and store Diagnostic Trouble Code (DTC) P2B59F0, which relates to the Integrated Thermal Management Module (ITM) circuit due to a logic error. This bulletin provides instructions to update the Engine Control Module (ECM) logic to correct this condition.

an inoperable horn that may be caused by foreign substances causing internal parts to oxidize. This bulletin provides instructions on how to replace both inoperative horns.

combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

The matter is being investigated to ensure the software can be directed to the impacted VIN population. We will provide an update once the issue is resolved and the suspension is lifted.

The matter is being investigated to ensure the software can be directed to the impacted VIN population. We will provide an update once the issue is resolved and the suspension is lifted.

Some vehicles are not able to complete the update after multiple attempts and some are completing the update after multiple initial failed attempts. Technicians may experience consistent Data Communication Unit (DCU) software upgrade failures when attempting to update to the latest version. The matter is being investigated to address the update failures and recover any failed modules. We will provide an update once the issue is resolved and the suspension is lifted.

Sunday, February 9th , resulting in the potential loss of connectivity or interruptions when attempting to use Bluelink functions. Voice Recognition, Sports Media, and Weather will not be available. Dealer stock and retailed vehicles are both affected. If a customer calls in and their vehicle is experiencing issues related to Bluelink, please have them come into the dealership to assist with resetting the Bluelink Data Communication Unit (DCU) and utilize TSB 25-BE-003H posted on Hyundai Tech Info.

connection due to improper soldering within the sensor components. This bulletin outlines the procedure to replace the active air flap (AAF) on-board diagnostic (OBD) sensors to resolve this issue.

12-volt battery drain due to the passive entry feature of the Digital Key 2 premium causing repeated wakeup of the vehicle. This bulletin provides instructions to perform software updates for the Ultra-Wide Band (UWB) and Body Domain Control (BDC) modules.

The DCU module may shut down telematics services after one year. TSB 25-01-061H-1 provides instructions to perform a software update for the DCU module.

initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.

a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletins (TSBs) 25-01-057H-1, 25-01-059H-1 & 25-01-060H-1 provide instructions to perform a software update for the DCU module. Over-the-Air (OTA): This update can also be conducted via OTA. The customer can complete on his/her own if he/she has an active subscription to Hyundai Bluelink. A visit to the dealership is not required.

initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.

initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.

initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.

initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.

initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.

initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.

initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.

error message on the instrument cluster display. When the message appears, it may prevent usage of the Fingerprint Module (FPM). The DTC captured for this condition is B18CC00 IAU Teaching Error (w/FPM). This bulletin provides instructions to perform a software update for the Fingerprint Module (FPM).

error message on the instrument cluster display. When the message appears, it may prevent usage of the Fingerprint Module (FPM). The DTC captured for this concern is B18CC00 - IAU Teaching Error (w/FPM). This bulletin provides instructions to perform a software update for the Fingerprint Module (FPM).

Instrument Cluster Module require software verification PRIOR to odometer mileage writing. If the Cluster Module does not have the latest software, the incorrect mileage may be written to the new module. This bulletin provides information to confirm the Instrument Cluster Module is equipped with the latest software version prior to using the GDS tablet to write the odometer mileage.

This bulletin provides instructions to update both subsystems (MCU/AP) related to the CCU to improve the logic of the CCU.

Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.

The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.

Bluetooth and wireless phone projection. The vehicle's name may also not appear when trying to connect via Bluetooth. This condition may be caused by an internal fault inside the ccNC unit. Follow the procedures in this TSB to replace the ccNC unit in affected vehicles.

The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.

screen flickering or intermittently going blank. This may be due to the shield width of the coaxial cable being too wide, causing a loose connection. Follow the procedures in this bulletin to adjust the width of the shield using a supplied shield adjustment jig.

This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.

This bulletin provides instructions on how to replace both inoperative horns.

This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.

This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.

This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to reset the Connected Car Data Communication Unit (DCU) in Dealer Mode to resolve the connection.

This bulletin provides instructions to perform a software update for the CCU.

Event # 1297 is available TODAY effective 11:00 AM PST and the affected vehicle population (certain 2025 model year Hyundai Tucsons) has been reactivated.

drivers-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

counterfeit driverside airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or noncertified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: If the front camera is not properly installed and is completely or partially detached. In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).

PE/NX4 PE/NX4 PE HEV/NX4 PHEV/NX4a PE/NX4m PE vehicles in Puerto Rico.

This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to reset the Connected Car Data Communication Unit (DCU) in Dealer Mode to resolve the connection.