2024 Hyundai Tucson TSBs

This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption Inspection & Repair Guidelines, or the latest revision.

This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.

return to the designated park position due to a loose wiper motor crank arm nut. At Hyundai, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, the warranty coverage for the Wiper Motor Crank Arm Nut under these conditions has been extended to 10 years/100,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.

park position due to a loose wiper motor crank arm nut. Hyundai is extending the warranty coverage for the wiper motor crank arm nut under this condition to 10 years / 100,000 miles from the date of original retail delivery or date of first use (whichever comes first) and is valid for original and subsequent owners. Follow the procedure in Technical Service Bulletin (TSB) 26-BD-007H to replace the wiper motor crank arm nut to address this condition.

park position due to a loose wiper motor crank arm nut. Hyundai is extending the warranty coverage for the wiper motor crank arm nut under this condition to 10 years / 100,000 miles from the date of original retail delivery or date of first use (whichever comes first) and is valid for original and subsequent owners.

park position due to a loose wiper motor crank arm nut. Hyundai is extending the warranty coverage for the wiper motor crank arm nut under this condition to 10 years / 100,000 miles from the date of original retail delivery or date of first use (whichever comes first) and is valid for original and subsequent owners. Follow the procedure in this bulletin to replace the wiper motor crank arm nut to address this condition.

operation of the cooling fan after vehicle ignition has been turned off, potentially resulting in a no-start condition. The continuous cooling fan operation is caused by a stuck relay in the engine room PCB block. This bulletin provides instructions to replace the engine room PCB block to ensure the proper operation of the cooling fan.

lamp and store Diagnostic Trouble Code (DTC) P2B59F0, which relates to the Integrated Thermal Management Module (ITM) circuit due to a logic error. This bulletin provides instructions to update the Engine Control Module (ECM) logic to correct this condition.

have DTC U028700 (Lost Communication With Trans Fluid Pump Module) set by the transmission Electric Oil Pump (EOP). This DTC can cause the Idle Stop & Go (ISG) system to become inoperative. Follow the procedure in this bulletin to replace the Electric Oil Pump on affected vehicles.

combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

contaminated with solder flux during manufacturing, which could potentially result in an electrical short. An electrical short within the EGR valve could lead to a Malfunction Indicator lamp (MIL) illumination (P0405, P0642, P0652, P0404/P049D/P240F). Follow the information in this bulletin to replace the EGR valve assembly and gasket.

solder flux during manufacturing, which could potentially result in an electrical short. An electrical short within the EGR valve could lead to a Malfunction Indicator lamp (MIL) illumination (P0405, P0642, P0652, P0404/P049D/P240F). The California Air Resources Board has determined that these vehicles may be releasing air pollutants which exceed Federal and California standards.

connection due to improper soldering within the sensor components. This bulletin outlines the procedure to replace the active air flap (AAF) on-board diagnostic (OBD) sensors to resolve this issue.

potentially result in an electrical short. An electrical short within the EGR valve could lead to a malfunction of the EGR valve or crank position sensor, both of which reside on the same power circuit, resulting in the malfunction indicator light (MIL) illumination and/or sudden loss of drive power during operation.

contaminated with solder flux during manufacturing, which could potentially result in an electrical short. An electrical short within the EGR valve could lead to a Malfunction Indicator lamp (MIL) illumination (P0405, P0642, P0652, P0404/P049D/P240F). Follow the information in this bulletin to replace the EGR valve assembly and gasket.

solder flux during manufacturing, which could potentially result in an electrical short. An electrical short within the EGR valve could lead to a Malfunction Indicator lamp (MIL) illumination (P0405, P0642, P0652, P0404/P049D/P240F). The California Air Resources Board has determined that these vehicles may be releasing air pollutants which exceed Federal and California standards.

Follow the procedure outlined in this TSB to inspect and, if necessary, replace the O-Ring at the Oil Cooler Fitting.

vehicles and the Engine Control Module (ECM) for the 2022-24MY Tucson vehicles to improve operation of the Idle Stop and Go (ISG) system. Under certain circumstances the vehicle may not restart after ISG system has engaged and require a manual restart due to the lack of intake manifold pressure recovery.

or symptoms listed below, refer to the Service Procedure to diagnose the condition. DIAGNOSTIC TROUBLE CODES: P070500 - Transmission range sensor circuit malfunction P070512 - Transmission range sensor circuit malfunction P070514 - Transmission range sensor circuit malfunction P07051C - Transmission range sensor circuit malfunction P070600 - Transmission range sensor circuit range/performance P070661 - Transmission range sensor circuit range/performance P070696 - Transmission range sensor circuit range/performance SYMPTOMS: Malfunction Indicator Light (MIL) illuminated 5th gear fail-safe Intermittently wont shift into D or R Intermittently wont shift out of Park Intermittent ly no engine cr ank/n o start in P or N with or without MIL or DTC.

service procedure and replace the related solenoid and harness.

Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 2nd Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.

Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.

The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.

The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.

screen flickering or intermittently going blank. This may be due to the shield width of the coaxial cable being too wide, causing a loose connection. Follow the procedures in this bulletin to adjust the width of the shield using a supplied shield adjustment jig.

drivers-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

counterfeit driverside airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or noncertified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

and/or a Check turn signal error message on the cluster. Follow the procedure in this bulletin to update the software for the Integrated Control Unit (ICU) to correct these conditions.

and/or a Check turn signal error message on the cluster. Follow the procedure in this bulletin to update the software for the Integrated Control Unit (ICU) to correct these conditions.

This bulletin provides instructions on how to replace both inoperative horns.

Follow the procedure in this TSB to replace the C-pillar garnishes for vehicles exhibiting this condition.

(transmission clutch slip in gear above limit) listed on Page 2.

If replacement of the SBW button is required due to one or more button plating peeling, replace the button(s) with a new one. Do not replace the complete SBW lever.

If you are servicing a vehicle with any symptoms listed below or DTCs (listed on Page 2) , follow the Service Procedure on Page 3. SYMPTOMS: Shifter System Malfunction displayed in the cluster Wont shift into or out of gear or wont shift out of Park Incorrect gear display in cluster and/or wont start

improper sealing of the windshield glass. This bulletin provides the procedures to fill in the gap of the urethane seal between the body and windshield glass.

improper sealing of the windshield glass. TSB 23-01-085H-1 (or latest version) provides the procedures to fill in the gap of the urethane seal between the body and windshield glass.

improper sealing of the windshield glass. This bulletin provides the procedures to fill in the gap of the urethane seal between the body and windshield glass.

improper sealing of the windshield glass. TSB 23-01-085H provides the procedures to fill in the gap of the urethane seal between the body and windshield glass.

This may be due to an irregular disconnection on Verizons communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.

This may be due to an irregular disconnection on Verizon's communication network. If you are experiencing issues with remote commands, or other Bluelink services, please see the instructions below to reestablish the connection via the AVN pinhole reset method.

This may be due to an irregular disconnection on Verizons communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.

display warning messages on the instrument cluster, resulting in the PDW sensor(s) failing to detect nearby objects or triggering multiple false alarms. This condition may be a result of external damage to the PDW sensor membrane or sensor cover from rock chips or road debris, a collision, or previous vehicle repairs or modifications.

This bulletin provides the procedure to perform an inspection on the starter magnetic switch for potential freezing and, if necessary, replace the starter magnetic switch (solenoid) assembly.

C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: If the front camera is not properly installed and is completely or partially detached. In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).

closing condition due to an inoperative fuel filler door release actuator. This bulletin provides instructions to replace the fuel filler door release actuator.

This incorrect software may result in some functions and images not matching the Owners Manual. Follow the procedure in this TSB to update the software to the correct version.

If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.