2026 Hyundai Santa Fe Hybrid TSBs

This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption Inspection & Repair Guidelines, or the latest revision.

This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.

System (IMS) may produce buzz, squeak, rattle noises when the drivers front seat is adjusted forward or backwards due to friction within the motors tube. This bulletin provides instructions to remove the motor tube.

entry feature of the Digital Key 2 premium causing repeated wakeup of the vehicle. This bulletin provides instructions to perform software updates for the Ultra-Wide Band (UWB) and Body Domain Control (BDC) modules.

buttons due to incorrect ECU logic for the Seat Heater Unit Front (SHU_FRT). This bulletin provides instructions to perform a software update for the Seat Heater Unit Front to correct the logic.

capacitive touch buttons due to incorrect ECU logic for the Seat Heater Unit Front (SHU_FRT). Technical Service Bulletins (TSBs) 25-01-025H-1 and 25-01-028H-1 provides instructions to perform a software update for the Seat Heater Unit Front to correct the logic. Over-the-Air (OTA): This update can also be conducted via OTA. The customer can complete on his/her own if he/she has an active subscription to Hyundai Bluelink. A visit to the dealership is not required. Deployment of the OTA to Bluelink customers is planned to start the week of 11/11/25.

drivers-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

counterfeit driverside airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or noncertified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.