2025 Hyundai Santa Fe Hybrid TSBs

This bulletin provides instructions to trim the seat cover and replace the walk-in switch with improved parts.

entry feature of the Digital Key 2 premium causing repeated wakeup of the vehicle. This bulletin provides instructions to perform software updates for the Ultra-Wide Band (UWB) and Body Domain Control (BDC) modules.

(FPM) not entering 'SLEEP' mode when the ignition is turned off. This bulletin provides instructions to perform a software update with revised logic for the FPM.

Fingerprint Module (FPM) not entering 'SLEEP' mode when the ignition is turned off. Technical Service Bulletins (TSBs) 26-01-015H and 26-01-016H provide instructions to perform a software update with revised logic for the FPM. *Over-the-Air (OTA): This update can also be conducted via OTA. The customer can complete on his/her own if he/she has an active subscription to Hyundai Bluelink. A visit to the dealership is not required. Deployment of the OTA to Bluelink customers is planned starting the week of 02/16/2026.

(FPM) not entering 'SLEEP' mode when the ignition is turned off. This bulletin provides instructions to perform a software update with revised logic for the FPM.

capacitive touch buttons due to incorrect ECU logic for the Seat Heater Unit Front (SHU_FRT). Technical Service Bulletins (TSBs) 25-01-025H-1 and 25-01-028H-1 provides instructions to perform a software update for the Seat Heater Unit Front to correct the logic. Over-the-Air (OTA): This update can also be conducted via OTA. The customer can complete on his/her own if he/she has an active subscription to Hyundai Bluelink. A visit to the dealership is not required. Deployment of the OTA to Bluelink customers is planned to start the week of 11/11/25.

This bulletin provides instructions to perform a software update for the Seat Heater Unit Front to correct the logic.

Instrument Cluster Module require software verification PRIOR to odometer mileage writing. If the Cluster Module does not have the latest software, the incorrect mileage may be written to the new module. This bulletin provides information to confirm the Instrument Cluster Module is equipped with the latest software version prior to using the GDS tablet to write the odometer mileage.

Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 2nd Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.

Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.

The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.

The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.

screen flickering or intermittently going blank. This may be due to the shield width of the coaxial cable being too wide, causing a loose connection. Follow the procedures in this bulletin to adjust the width of the shield using a supplied shield adjustment jig.

This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption Inspection & Repair Guidelines, or the latest revision.

This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.

System (IMS) may produce buzz, squeak, rattle noises when the drivers front seat is adjusted forward or backwards due to friction within the motors tube. This bulletin provides instructions to remove the motor tube.

combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

Sunday, February 9th , resulting in the potential loss of connectivity or interruptions when attempting to use Bluelink functions. Voice Recognition, Sports Media, and Weather will not be available. Dealer stock and retailed vehicles are both affected. If a customer calls in and their vehicle is experiencing issues related to Bluelink, please have them come into the dealership to assist with resetting the Bluelink Data Communication Unit (DCU) and utilize TSB 25-BE-003H posted on Hyundai Tech Info.

This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.

The noise may be caused by a missing weld on the right front subframe mounting stud.

This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.

This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.

This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to reset the Connected Car Data Communication Unit (DCU) in Dealer Mode to resolve the connection.

This bulletin provides the procedure to replace the armrest cap on the 2nd row captains chairs with a revised part.

This bulletin provides instructions to reset the network in Dealer Mode to prevent the Data Concentrator Unit (DCU) modem from experiencing a "Blue Link Not Open" error.

This bulletin provides instructions to reset the network in Dealer Mode to prevent the Data Concentrator Unit (DCU) modem from experiencing a "Blue Link Not Open" error.

drivers-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

counterfeit driverside airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or noncertified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

weld on the mounting stud of the right front subframe while driving. The vehicles structural integrity is maintained even with a missing weld; however, drivers may report an abnormal noise coming from the affected area during certain driving scenarios.

weld on the mounting stud of the right front subframe while driving. The vehicles structural integrity is maintained even with a missing weld; however, drivers may report an abnormal noise coming from the affected area during certain driving scenarios. This bulletin describes the procedure to inspect, and if necessary, repair the missing weld on the mounting stud to eliminate the noise.

surfaces may exhibit wrinkling on the first or second row seat cushions or seat backs, or tearing along the perforation holes due to the stiffness of the leather material. This bulletin provides instructions to replace the wrinkled or torn seat covers.