2022 Hyundai Palisade TSBs

This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.

This bulletin outlines the combustion chamber cleaning procedure for vehicles diagnosed with this condition. All internal combustion engines consume some engine oil during normal operation, depending on driving conditions and mileage, and this procedure should only be performed when deemed necessary based on inspection and diagnosis of the vehicle as outlined in TSB 26-EM-015H, Engine Oil Consumption Inspection & Repair Guidelines, or the latest revision.

due to deterioration of the housing seal. At Hyundai, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, the warranty coverage for the Engine Oil Filter Housing Seal under these conditions has been extended to 15 years/180,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.

operation of the cooling fan after vehicle ignition has been turned off, potentially resulting in a no-start condition. The continuous cooling fan operation is caused by a stuck relay in the engine room PCB block. This bulletin provides instructions to replace the engine room PCB block to ensure the proper operation of the cooling fan.

Hyundai is extending the warranty coverage for the engine oil filter housing seal to 15 years / 180,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the procedure in Technical Service Bulletin (TSB) 26-EM-012H to replace the engine oil filter housing seal in order to address this condition. Please note that any vehicles within 15 years / 180,000 miles are covered by this TSB, even if the vehicle is still within the New Vehicle Limited Warranty (NVLW) of 5 years / 60,000 miles or Powertrain Warranty of 10 years / 100,000 miles (for the original owner).

Hyundai is extending the warranty coverage for the engine oil filter housing seal to 15 years / 180,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Please note any vehicles within 15 years / 180,000 miles are covered by this TSB, even if the vehicle is still within the New Vehicle Limited Warranty (NVLW) of 5 years / 60,000 miles or Powertrain Warranty of 10 years / 100,000 miles (for the original owner).

Hyundai is extending the warranty coverage for the engine oil filter housing seal to 15 years / 180,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the procedure in this bulletin to replace the engine oil filter housing seal in order to address this condition.

and Particulate Matter (PM) emission standards. Technical Service Bulletin (TSB) 26-01-010H provides the service procedure to update the emission logic within the Engine Control Module (ECM) to improve engine-out NOx and PM emissions, so they are within permissible specifications. Additionally, improvements to reduce noise during engine start, and enhanced thermostat logic, are also included in the updated ECM software.

and Particulate Matter (PM) emission standards. The service procedure provides an update to the emission logic within the Engine Control Module (ECM) to improve engine-out NOx and PM emissions, so they are within permissible specifications. Additionally, improvements to reduce noise during engine start, and enhanced thermostat logic, are also included in the updated ECM software.

and Particulate Matter (PM) emission standards. This bulletin provides the service procedure to update the emission logic within the Engine Control Module (ECM) to improve engine-out NOx and PM emissions, so they are within permissible specifications. Additionally, improvements to reduce noise during engine start, and enhanced thermostat logic, are also included in the updated ECM software.

combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

(LX2) vehicles to reduce the coupling noises when making turns.

or symptoms listed below, refer to the Service Procedure to diagnose the condition. DIAGNOSTIC TROUBLE CODES: P070500 - Transmission range sensor circuit malfunction P070512 - Transmission range sensor circuit malfunction P070514 - Transmission range sensor circuit malfunction P07051C - Transmission range sensor circuit malfunction P070600 - Transmission range sensor circuit range/performance P070661 - Transmission range sensor circuit range/performance P070696 - Transmission range sensor circuit range/performance SYMPTOMS: Malfunction Indicator Light (MIL) illuminated 5th gear fail-safe Intermittently wont shift into D or R Intermittently wont shift out of Park Intermittent ly no engine cr ank/n o start in P or N with or without MIL or DTC.

service procedure and replace the related solenoid and harness.

Follow the procedure outlined in this bulletin to inspect and replace the radiator to correct the condition, if necessary.

service procedure and replace the related solenoid and harness.

combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.

system accordingly during engine short block or sub-assembly replacement.

If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.

This bulletin provides the procedure to update the Integrated Central Control Unit (ICU) software to resolve this condition.

the repair procedure and replace the related input/output speed sensor and harness.

If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.

If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.

the repair procedure and replace the related solenoid and valve body harness.

If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing

panels: hood, fender(s), roof, door(s), quarter panel(s), and tailgate/trunk. This warranty extension only applies to factory-applied paint and does not cover collision-related paint repairs or vehicles with a salvaged title. Hyundai is extending the warranty coverage for certain white paint colors under these conditions from 3 years and 36,000 miles, to 10 years with unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners.

fender(s), roof, door(s), quarter panel(s), and tailgate/trunk. The paint warranty coverage for affected vehicles has been extended to 10 years/unlimited miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners. The warranty extension does not apply to any vehicle that has ever been declared a total loss or sold for salvage by a financial institution or insurer or has a branded or similar title under any states law.

roof, door(s), quarter panel(s), and tailgate/trunk. The paint warranty coverage for affected vehicles has been extended to 10 years/unlimited miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners.

panels: hood, fender(s), roof, door(s), quarter panel(s), and tailgate/trunk. This warranty extension only applies to factory-applied paint and does not cover collision-related paint repairs or vehicles with a salvaged title. Hyundai is extending the warranty coverage for certain white paint colors under these conditions from 3 years and 36,000 miles, to 10 years and unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners.

Santa Fe Sport, 2019 model year Santa Fe, 2021 2023 model year Santa Fe Hybrid, and 2020 2023 model year Palisade vehicles may exhibit excessive paint peeling or bubbling of the primer/paint film on the exterior metal body panels: hood, fender(s), roof, door(s), quarter panel(s), and tailgate/trunk. This warranty extension only applies to factory-applied paint and does not cover collision-related paint repairs or vehicles with a salvaged title. Hyundai is extending the warranty coverage for certain white paint colors under these conditions from 3 years and 36,000 miles, to 10 years with unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners.

hood, fender(s), roof, door(s), quarter panel(s), and tailgate/trunk. The paint warranty coverage for affected vehicles has been extended to 10 years/unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners. The warranty extension does NOT apply to any vehicle that has ever been declared a total loss or sold for salvage by a financial institution or insurer, or has a branded or similar title under any states law.

fender(s), roof, door(s), quarter panel(s), and tailgate/trunk. The paint warranty coverage for affected vehicles has been extended to 10 years/unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners. The warranty extension does NOT apply to any vehicle that has been previously declared a total loss, and/or sold for salvage by a financial institution or insurer, and/or has a branded or similar title under any states law.

It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.

The sunroof may be inoperable and become stuck in the open, partially open, or closed position. This bulletin describes the procedure to replace the sunroof wind deflector and sunroof mechanisms with revised parts.

The sunroof may become inoperable and stuck in the open, partially open, or closed position. This bulletin describes the procedure to replace the sunroof wind deflector and sunroof mechanisms with revised parts.

This bulletin describes the procedure to repair the condition.

This bulletin describes the procedure to repair the condition.

drivers-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

counterfeit driverside airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or noncertified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

Hyundai has extended warranty coverage for the seat belt buckle under this condition to 15 years/150,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.

At Hyundai, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Hyundai is extending warranty coverage for the Seat Belt Buckle under this condition to 15 years/150,000 miles (whichever occurs first) from the date of original retail delivery or date of first use and is valid for original and subsequent owners.

Hyundai is extending warranty coverage for the seat belt buckle under this condition to 15 years/150,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Please note that any vehicles under 15 years/150,000 miles and within the original 5 years/60,000 miles are still subject to this warranty extension under TSB 25-BE-010H.

Follow the procedure in this TSB to inspect the concerning seat belt buckle(s) for abnormal symptoms with buckle insertion, ejection feeling, sound, or potential debris that influences operation. If any of the above symptoms are found, replace the seat belt buckle(s). Hyundai is extending warranty coverage for the seat belt buckle under this condition to 15 years/150,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Please note that any vehicles under 15 years/150,000 miles are covered by this TSB, even if vehicle is within original warranty of 5 years/60,000 miles.

Hyundai is extending warranty coverage for the seat belts under this condition to 10 years/100,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the service procedure in this TSB to visually inspect and replace seat belts that are twisted due to excessive space in the D-ring.

Hyundai is extending warranty coverage for the seat belts under this condition to 10 years/100,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the service procedure in this TSB to visually inspect and replace seat belts that are twisted due to excessive space in the D-ring.

At Hyundai, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Hyundai is extending the warranty coverage for the seat belts under this condition to 10 years/ 100,00 miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners.

Hyundai is extending warranty coverage for the seat belts under this condition to 10 years/100,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the service procedure in this TSB to visually inspect and replace seat belts that are twisted due to excessive space in the D-ring.

Hyundai is extending warranty coverage for the seat belts under this condition to 10 years/100,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the service procedure in this TSB to visually inspect and replace seat belts that are twisted due to excessive space in the D-ring.

This may be caused by worn rear self-leveling shock absorbers. At Hyundai, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Hyundai is extending warranty coverage for the self-leveling rear shock absorbers under this condition to 10 years / 120,000 miles (whichever occurs first) from the date of original retail delivery or date of first use and is valid for original and subsequent owners.

This may be caused by worn self-leveling rear shock absorbers. Hyundai is extending the warranty coverage for the self-leveling rear shock absorbers to 10 years/120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the procedure in the bulletin to identify the source of the noise, and if necessary, replace one or both self-leveling rear shock absorbers. Please note that for the first repair, replacement of both rear shock absorbers will be covered by this warranty extension. For subsequent repairs, one or both rear shock absorbers will be covered depending upon the impacted side(s).

This may be caused by worn self-leveling rear shock absorbers. Hyundai is extending the warranty coverage for the self-leveling rear shock absorbers to 10 years/120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the procedure in Technical Service Bulletin (TSB) 26-SS-001H to identify the source of the noise, and if necessary, replace one or both self-leveling rear shock absorbers. Please note that for the first repair, replacement of both rear shock absorbers will be covered by this warranty extension. For subsequent repairs, one or both rear shock absorbers will be covered depending upon the impacted side(s). Please note that any vehicles under 10 years/120,000 miles are covered by this TSB, even if vehicle is within 5 years/60,000 miles.

This may be caused by worn self-leveling rear shock absorbers. Hyundai is extending the warranty coverage for the self-leveling rear shock absorbers to 10 years/120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Please note that any vehicles with Z12 and under 10 years/120,000 miles are covered by this TSB, even if vehicle is within original warranty of 5 years/60,000 miles.

This may be caused by worn self-leveling rear shock absorbers. Hyundai is extending the warranty coverage for the self-leveling rear shock absorbers to 10 years/120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the procedure in the bulletin to identify the source of the noise, and if necessary, replace one or both self-leveling rear shock absorbers. Please note that for the first repair, replacement of both rear shock absorbers will be covered by this warranty extension. For subsequent repairs, one or both rear shock absorbers will be covered depending upon the impacted side(s).

This may be caused by worn self-leveling rear shock absorbers. Hyundai is extending the warranty coverage for the self-leveling rear shock absorbers to 10 years/120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Technical Service Bulletin (TSB) 25-SS-004H provides instructions on the replacement of the self-level rear shock absorbers.

This may be caused by worn rear self-leveling shock absorbers. Hyundai is extending the warranty coverage for the self-leveling rear shock absorbers to 10 years/120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.

This may be caused by worn self-leveling rear shock absorbers. Hyundai is extending the warranty coverage for the self-leveling rear shock absorbers to 10 years/120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the procedure in this bulletin to identify the source of the noise and replace the self-leveling rear shock absorbers.

The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.

system.

The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.

system.

system.

when entering radio mode and/or displays a message that reads Uneven Road Ahead, Drive carefully on the cluster along with a warning sound. Follow the procedure outlined in this bulletin to update the AVN software to resolve this condition.

system.

when entering radio mode and/or displays a message that reads Uneven Road Ahead, Drive carefully on the cluster along with a warning sound. Follow the procedure outlined in this bulletin to update the AVN software to resolve this condition.

(transmission clutch slip in gear above limit) listed on Page 2.

If you are servicing a vehicle with any symptoms listed below or DTCs (listed on Page 2) , follow the Service Procedure on Page 3. SYMPTOMS: Shifter System Malfunction displayed in the cluster Wont shift into or out of gear or wont shift out of Park Incorrect gear display in cluster and/or wont start

The current version of Google Maps has 10 times the data transmission compared to the previous version. As a countermeasure, an update with a frame skip logic has been added to resolve the data congestion with Google Maps.

or symptoms listed below, refer to the Service Procedure to diagnose the condition.

is at normal operating temperature. This bulletin describes the procedure to inspect, and if necessary, replace the drive plate.

If you are servicing a vehicle with any symptoms or DTC listed below, follow the Service Procedure, Page 2.

accelerating from a stop due to ISG and improve shift quality.

with the All Wheel Drive Electronic Control Unit (AWD ECU). This bulletin provides instructions to update the AWD ECU to reduce the coupling noise.

to the battery SOH (State Of Health) condition will be removed - ISG engagement with satisfied battery SOC (State Of Charge) will remain

or latest version) for vehicles equipped with a Genuine Hyundai Accessory trailer tow hitch and wire harness installed.

The driver intermittently cannot adjust the outside mirrors. This bulletin provides the service procedure to update the DDM (Driver Door Module) or DAU (Driver Door Area Unit) software to resolve the condition stated above.

compressor pulley and hub assembly. Follow the procedure outlined in this bulletin to inspect and determine whether to replace the compressor assembly or only the pulley using the service kit.

compressor pulley and hub assembly. Follow the procedure outlined in this bulletin to inspect and determine whether to replace the compressor assembly or only the pulley using the service kit.

Follow the procedure outlined in this bulletin to inspect and determine whether to replace the compressor assembly or only the pulley using the service kit.

If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.

This may be due to an irregular disconnection on Verizons communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.

This may be due to an irregular disconnection on Verizon's communication network. If you are experiencing issues with remote commands, or other Bluelink services, please see the instructions below to reestablish the connection via the AVN pinhole reset method.

This may be due to an irregular disconnection on Verizons communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.

steering left vs right on some Palisade (LX2), Santa Fe Hybrid (TM HEV), and Santa Fe Plug-In Hybrid (TM PHEV) vehicles.

and newer Santa Fe (TMA), 2021MY and newer Santa Fe Hybrid (TM HEV), 2022MY and newer Santa Fe Plug-In Hybrid (TM PHEV), and 2019MY and newer Palisade (LX2) vehicles equipped with surround view monitoring (SVM) system.

This bulletin provides information for troubleshooting the third row seat.

click sound can be heard when tightening the cap.