2015 Hyundai Genesis TSBs

performance on certain 2015-2016MY 3.8L AWD G80 (DH) vehicles.

recommended safe chemical products.

This bulletin describes the procedure to install an e-ring clip to the tilt pipe housing on the front seat.

chemical products.

This bulletin describes the procedure to replace the seat backboard clip.

This bulletin describes the procedure to replace the seat backboard clip.

Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.

This bulletin describes the procedure to replace the seat backboard clip.

Some vehicles may experience the seat backboard coming loose.

If wobble, and/or noise occurs from the front seat track assembly, it is recommended to replace the front seat cushion tilt pipe housings with new ones instead of replacing the front seat track assembly.

combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

Poor fuel quality may lead to cold engine startability issues, hesitation at idle or during acceleration, and/or poor driveability. In addition, prolonged vehicle operation with poor quality fuel may result in damage to the fuel system and formation of engine deposits. The BG Fuel Test Kit can be used to determine the following aspects of the fuel: Sediment / Water Contamination Inspection Specific Gravity Alcohol Content

To correct this symptom, an auxiliary canister assembly between the canister and Canister Close Valve (CCV) will be installed.

To correct this symptom, install an auxiliary canister assembly between the canister and Canister Close Valve (CCV).

combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of the Gross Vehicle Weight Rating or 100 pounds. If the total added weight exceeds the lesser of the limit, a label (See Figure 1) must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard. NOTE: Effective immediately, all ports will stop the installation of the Load Capacity Label when there are no port accessories installed.

load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.

system accordingly during engine short block or sub-assembly replacement.

Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.

combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.

This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.

Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3.3L / 3.8L GDI engines.

Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3.3L / 3.8L GDI engines.

replace the throttle body.

replace the related solenoid and E-module.

Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.

Procedure and replace the E-module.

This bulletin provides service information and the procedure to replace the haptic controller.

which may exhibit a coolant leak between the ATF connector and engine side heater pipe.

the original equipment tires (Hankook Ventus S1 Noble 2) may exhibit uneven tread wear; and/or cracks along the sidewall(s). The cracks in the sidewall of a tire could result in air loss and a loss of vehicle control, increasing the risk of a vehicle crash. This bulletin describes the service procedure to replace the Hankook brand tires with 18 Michelin tires or 19 Continental tires. Vehicles equipped with 18 tires require a software update which changes the Engine Control Modules speed governor from 149 to 130 mph to accommodate the tire speed rating change from W for the Hankook tires to V for the Michelins.

MALFUNCTION INDICATOR LAMPS BLINKS OFF AND ON AND PROCEDURE IS PROVIDED. MODEL 2015 GENESIS. *PE

(transmission clutch slip in gear above limit) listed on Page 2.

the 2~3, 3~4 or 4~5 upshift.

OEM (new) and remanufactured automatic transmissions:

GDS.

This procedure is necessary to reduce the TCU learning time and improve the shift quality.

If the variant coding procedure is not performed after the navigation unit is replaced and vehicle is in the Reverse gear, a black/blank screen, black and white image, or no image may be displayed.

If the variant coding procedure is not performed after the navigation unit is replaced and vehicle is in the Reverse gear, a black/blank screen, black and white image, or no image may be displayed.

The ATF level can be checked by the procedure shown below.

DESCRIPTION: DO NOT REPLACE THE TRANSMISSION FOR THE DTC LISTED BELOW. INSTEAD, FOLLOW THE REPAIR PROCEDURE AND REPLACE THE E-MODULE."

P0773, P2709 & P0841"

INSTEAD, FOLLOW THE REPAIR PROCEDURE AND REPLACE THE E-MODULE.

THIS PROCEDURE IS NECESSARY TO REDUCE THE TCM LEARNING TIME AND IMPROVE THE SHIFT QUALITY.

THIS BULLETIN PROVIDES THE PROCEDURES NECESSARY TO RESET (ERASE) AND RELEARN THE PCM/TCM ADAPTIVE VALUES. AFTER THE FOLLOWING REPAIRS HAVE BEEN COMPLETED, THE PCM/TCM ADAPTIVE VALUES MUST BE RESET IN ORDER TO PROVIDE OPTIMUM SHIFT QUALITY. IF THE PROCEDURE IS NOT PERFORMED, THE TRANSMISSION MAY EXPERIENCE A SHIFT FLARE OR HARSH SHIFT. H REPLACE AUTOMATIC TRANSAXLE OR PCM/TCM H REPROGRAM OR EXCHANGE A PCM/TCM FROM ANOTHER VEHICLE"

Apple CarPlay and Android Auto feature. This bulletin describes how to transfer the update software to a storage drive (USB or SD Card) and perform the software installation into the audio system.

2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.

This procedure is specifically for the clock date and time not displaying which started appearing around August 17, 2019. Other similar concerns which were opened before this date are a different root cause and will not be resolved by this information. An example of the clock concern is shown in the screenshot below:

This procedure is specifically for the clock date and time not displaying which started appearing around August 17, 2019. Other similar concerns which were opened before this date are a different root cause and will not be resolved by this information. An example of the clock concern is shown in the screenshot below:

pop-up message shown (intermittently) after every Head Unit boot up.

AM>FM>SXM (intermittently) on its own.

the inability to set the clock or view it on the top of the screen.

DE-ACTIVATED FOR THE FOLLOWING REASONS: H A CUSTOMER WHO INITIALLY WAIVES BLUE LINK ENROLLMENT, AND THEN DECIDES TO ENROLL AFTER PURCHASE OF VEHICLE. H A CUSTOMER WHO ALLOWS ALL PACKAGES OF THEIR BLUE LINK SUBSCRIPTION TO EXPIRE AND THEN WISHES TO RE-SUBSCRIBE TO BLUE LINK. H A CUSTOMER WHO DID NOT ENROLL IN BLUE LINK WITHIN THE FIRST 30 DAYS OF OWNERSHIP (AT WHICH TIME THE DEVICE BECOMES INACTIVE), BUT THEN DECIDES TO ENROLL. H A SUBSEQUENT OWNER WHO WISHES TO ENROLL IN BLUE LINK."

APPLE CARPLAY AND ANDROID AUTO FEATURE. THIS BULLETIN DESCRIBES HOW TO TRANSFER THE UPDATE SOFTWARE TO A STORAGE DRIVE (USB OR SD CARD) AND PERFORM THE SOFTWARE INSTALLATION INTO THE AUDIO SYSTEM.

It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.

Creaking Noise ? Inoperative Slide

date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.

date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.

When diagnosing and repairing the outside mirror, do not replace the entire assembly. Refer to page 2 of this TSB for replacement of individual parts.

moving glass assembly.

HOUSING DUE TO WATER INTRUDING IN INTERIOR CABIN. MODEL 2015 GENESIS. *PE

Hyundai Genesis (DH) vehicles located in the non-salt belt states. Nonsalt belt states are listed below in Applicable Vehicles.

vehicles located in the salt belt states. Salt belt states are listed below in Applicable Vehicles.

equipped with Electronic Control Suspension (ECS). These harnesses are now available separately from the ECS shock assembly.

For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.

maximize tire life and performance.

diagnosing and conducting alignment-related repairs for all models and model years.

UNEVEN TREAD WEAR; AND/OR CRACKS ALONG THE SIDEWALL(S). THE CRACKS IN THE SIDEWALL OF A TIRE COULD RESULT IN AIR LOSS AND A LOSS OF VEHICLE CONTROL, INCREASING THE RISK OF A VEHICLE CRASH.

U010900 related to a communication error with the Fuel Pump Control Module (FPCM).

This bulletin provides the procedure to inspect, repair when necessary, and reroute the wire harness.

State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days.

from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.

This may be due to an irregular disconnection on Verizon's communication network. If you are experiencing issues with remote commands, or other Bluelink services, please see the instructions below to reestablish the connection via the AVN pinhole reset method.

This may be due to an irregular disconnection on Verizons communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.

Control Unit (ACU), which may cause the airbag warning light to illuminate. At Hyundai, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Hyundai is extending the warranty coverage for the ACU under this condition to 15 years with unlimited mileage from the date of original retail delivery or date of first use and is valid for original and subsequent owners.

The associated DTCs covered by this TSB are listed on page 3 of the TSB. The airbag warning light may illuminate, however, airbag operation is unaffected. Hyundai is extending warranty coverage for the airbag control unit (ACU) for this condition to 15 years/unlimited mileage from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.

The associated DTC covered by this TSB are listed on page 3 of this bulletin. The airbag warning light may illuminate however airbag operation is unaffected. Hyundai is extending warranty coverage for the airbag control unit (ACU) for this condition to 15 years/unlimited mileage from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Follow the service procedure in this TSB to inspect the air bag control unit (ACU) and, if necessary, replace the airbag control unit (ACU).

assembly, and perform a software update. Certain vehicles may exhibit intermittent headlight flickering while driving with the light switch on AUTO light mode.

original retail delivery or date of first use (whichever occurs first). A service procedure is provided to replace the multifunction switch assembly. Certain vehicles may exhibit intermittent headlight flickering while driving with light switch on the AUTO light mode. Refer to the warranty and service parts information outlined in the TSB whenever the multifunction switch assembly replacement is required.

Certain vehicles may exhibit intermittent headlight flickering while driving with the light switch on AUTO light mode. Hyundai is extending the multifunction switch assembly warranty to 15 years with unlimited miles from the date of original retail delivery or date of first use (whichever occurs first). Refer to the warranty and service parts information outlined in this bulletin whenever the multifunction switch assembly replacement is required.

If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.

*LJ