1997 Hyundai Excel TSBs
20 Technical Service Bulletins across 9 categories
Categories
Other
4 bulletinsVARIOUS INFORMATION ON PROPER CARE FOR VEHICLE EXTERIORS AND CORRECTIVE STEPS FOR ENVIRONMENTAL DAMAGE.
Read full bulletin
*YC
This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using...
Read full bulletin
recommended safe chemical products.
This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe...
Read full bulletin
chemical products.
This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository.
Read full bulletin
Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
Transmission
3 bulletinsINFORMATION REGARDING END CLUTCH RETAINER AND CLUTCH PLATE MODIFICATION.
Read full bulletin
*YC
SHIFT CONDITION CAUSED BY SHORT CIRCUIT IN INHIBITOR SWITCH.
Read full bulletin
*TW
The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both...
Read full bulletin
OEM (new) and remanufactured automatic transmissions:
Engine
3 bulletinsThis bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear...
Read full bulletin
combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
This bulletin provides the service procedure for engine connecting rod bearing clearance testing.
Read full bulletin
Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear...
Read full bulletin
combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
Tires & Wheels
3 bulletinsThis bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance.
Read full bulletin
For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to...
Read full bulletin
maximize tire life and performance.
This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when...
Read full bulletin
diagnosing and conducting alignment-related repairs for all models and model years.
Brakes
2 bulletinsThis bulletin provides best practice recommendations when performing brake service procedures.
This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
Electrical
2 bulletinsThis bulletin provides information on identifying dealer stock vehicles with either: A Battery SOC alert - low Battery...
Read full bulletin
State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance...
Read full bulletin
from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
Suspension
1 bulletinINFORMATION ON TORSION BARS, GAS STRUTS AND CHMSL.
Read full bulletin
*YC
Pre-Delivery & Maintenance
1 bulletinThis bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
Infotainment
1 bulletinThis bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions.
Read full bulletin
2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.