1996 Hyundai Accent TSBs
51 Technical Service Bulletins across 12 categories
Categories
Transmission
18 bulletinsAUTOMATIC TRANSAXLE PULSE GENERATOR DIAGNOSTIC TROUBLE CODES P0717 AND P0722 - REVISED.
Read full bulletin
*JG
SUBJECT REGARDING AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODES LIST.
Read full bulletin
*YH
SUBJECT ON AUTOMATIC TRANSAXLE HARSH OR DELAYED PARK REVERSE OR PARK DRIVE ENGAGEMENT.
Read full bulletin
*YH
INFORMATION ON PERFORMING A TEST DRIVE FOR TRANSAXLE SHIFT QUALITY.
Read full bulletin
*TT
SOME VEHICLES MAY EXHIBIT SHIFTING OR CRACKING IN THE UNDERBODY LEFT AND / OR RIGHT LOWER ARM MOUNTING MEMBERS.
Read full bulletin
*TT
CONCERNS WITH SHIFT SHOCK AND DELAY UNDER VARIOUS CONDITIONS.
Read full bulletin
*TT
SUBJECT REGARDING AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODE P1613/1614.
Read full bulletin
*TT
VEHICLES MAY EXHIBIT A SLIGHT SHIFT FLARE DURING THE UPSHIFT FROM 2ND TO 3RD GEAR.
Read full bulletin
*TT
MODIFIED TRANSAXLE CONTROL MODULES.
Read full bulletin
*YC
MANUAL TRANSAXLE AIR BREATHER MODIFICATION.
Read full bulletin
*JD
SHIFT CONDITION CAUSED BY SHORT CIRCUIT IN INHIBITOR SWITCH.
Read full bulletin
*TW
IMPROVED SHIFT ENGAGEMENT LOGIC IN TRANSAXLE CONTROL MODULE.
Read full bulletin
*TW
MODIFIED TRANSAXLE CONTROL MODULES.
Read full bulletin
*TW
IMPROVED REVERSE GEAR SHIFT QUALITY.
Read full bulletin
*TW
The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both...
Read full bulletin
OEM (new) and remanufactured automatic transmissions:
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODE (DTC) LIST.
Read full bulletin
*KB
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODES LIST.
Read full bulletin
*TT
AUTOMATIC TRANSAXLE PULSE GENERATOR DIAGNOSTIC TROUBLE CODES P0717 & P0722.
Read full bulletin
2004 ACCENT INCLUDED. *TT
Other
8 bulletinsEXPERIENCING A TICKING/COLLAPSED LASH ADJUSTER CONDITION.
Read full bulletin
*YC
HDS ADAPTER CABLE HY02 INSTALLATION PROCEDURE.
Read full bulletin
*TW
This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using...
Read full bulletin
recommended safe chemical products.
This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe...
Read full bulletin
chemical products.
This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository.
Read full bulletin
Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
DATA LINK CONNECTOR (DLC) WIRE REPAIR FOR COMMUNICATION WITH GENERIC SCAN TOOLS (GST).*MR
ATA SOLENOID DIAGNOSTIC TROUBLE CODES P0740, P0741, P0742, P0743, P0745, P0747, P0748, P0750, P0752, P0753, P0755, P0757, P0758, P0760, P0765.
Read full bulletin
*TT *MJ
OBD-II READINESS TEST DRIVE CYCLE.
Read full bulletin
*TT
Engine
7 bulletinsSUBJECT REGARDING CRANKSHAFT POSITION SENSOR REPLACEMENT PROCEDURE.
Read full bulletin
*TT
ENGINE MOUNT BRACKET TORQUE SPECIFICATION (SHOP MANUAL CORRECTION).
Read full bulletin
*TW
ACCENT BRAKE BOOSTER CHECK VALVE (SHOP MANUAL CORRECTION).
Read full bulletin
*TW
THE CYLINDER HEAD TORQUE SEQUENCE FOR IN-LINE 4 CYLINDER ENGINES NOTED IN THE LISTED SHOP MANUALS IS INCORRECT.
Read full bulletin
*JD
RECALL 97V-026 - THE WINDSHIELD WIPER MOTOR THERMAL SWITCH CIRCUIT CONTACT POINTS MUST BE CLEANED ON CERTAIN HYUNDAI...
Read full bulletin
VEHICLES WHICH FALL INTO THE FOLLOWING PRODUTION RANGES TO CORRECT A POSSIBLE INTERMITTENT INTERRUPTION OF WIPER OPERATION- A WIPER MOTOR SERVICE KIT (PART #00305-CMP00-30) WILL BE SENT TO EACH DEALERSHIP CONTAINING THE SUPPLIES REQUIRED TO PERFORM THIS PROCEDURE- EACH KIT CAN SERVICE UP TO TEN (10) VEHICLES- ADDITIONAL KITS CAN BE ORDERED FROM YOUR FACING PDC- MODEL/PRODUCTION DATE RANGE: ACCENT 3/04/96 THROUGH 10/18/96- ELANTRA (SADAN & WAGON) 11/20/95 THROUGH 10/18/96- SONATA 12/18/95 THROUGH 10/18/96- TIBURON THROUGH 10/18/96- 97V-026. *JD
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear...
Read full bulletin
combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear...
Read full bulletin
combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
Electrical
5 bulletinsSUBJECT REGARDING DIAGNOSTIC GUIDE FOR CLIFFORD AND DEI SECURITY SYSTEM.
Read full bulletin
*JG
INFORMATION ON THE OXYGEN SENSOR OFFSET VOLTAGE CHANGE.
Read full bulletin
*YC
This bulletin provides information on identifying dealer stock vehicles with either: A Battery SOC alert - low Battery...
Read full bulletin
State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance...
Read full bulletin
from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
OXYGEN SENSORS. *SC
Tires & Wheels
3 bulletinsThis bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance.
Read full bulletin
For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to...
Read full bulletin
maximize tire life and performance.
This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when...
Read full bulletin
diagnosing and conducting alignment-related repairs for all models and model years.
Lighting
2 bulletinsTIBURON/ACCENT REAR SPOILER CENTER HIGH MOUNTED STOP LAMP.
Read full bulletin
*TW
REPLACEMENT CIGARETTE LIGHTER.
Read full bulletin
*NM
Infotainment
2 bulletinsRADIO REMOVAL AND INSTALLATION FOR ACCENT.
Read full bulletin
*TW
This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions.
Read full bulletin
2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
Suspension
2 bulletinsCAMPAIGN 058 . CUSTOMER NOTIFICATION.
Read full bulletin
LOWER CONTROL ARM INSPECTION/REPLACEMENT. *TT
LOWER CONTROL ARM INSPECTION/REPLACEMENT.
Read full bulletin
ROAD SALT MAY RESULT IN CORROSION OF THE FRONT LOWER CONTROL ARMS. SEVERE CORROSION MAY RESULT IN PERFORATION OF THE FRONT LOWER CONTROL ARM. *TT
Body & Paint
1 bulletinSERVICE PROCEDURES AND INFORMATION ON WINDOW ADJUSTMENT.
Read full bulletin
*YC
Steering
1 bulletinPOWER STEERING RESERVOIR MOUNTING BRACKET DESIGN CHANGE.
Read full bulletin
*TW
Pre-Delivery & Maintenance
1 bulletinThis bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
Brakes
1 bulletinThis bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.