2025 Harley-Davidson RH1250S TSBs

PURPOSE: Initial release. This bulletin informs dealers that Harley-Davidson has identified instances of premature engine failure due to abrasive particle wear, specifically from debris inside new aftermarket exhaust headers. Recent evaluations have identified that certain newly manufactured exhaust headers may contain residual hard particles that, if not removed prior to installation, can migrate through the engine system and cause accelerated component wear or severe mechanical damage.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.3.2. Release Date: Week of January 28, 2026. NOTE Software version (26.3.2) will need to be manually installed only if current software version of DT II is (26.0.2). Refer to bulletin M1713 for instructions. New Features: LiveWire. Changes: Revolution Max and all MY2026 vehicles. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 26.1.5. Release Date: Week of December 15, 2025. NOTE: Software version (26.1.5) will need to be manually installed. Refer to bulletin M1713 for instructions. New Features, Changes: 2026 Revolution Max Vehicles (RH975, RH975S, RH1250S, RA1250S, RA1250ST), 2026 Police Body Control Module (BCM), and Tire Pressure Monitoring System (TPMS). NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 26.0.2. Release Date: Week of November 18, 2025. New Features, Changes. 2026 Vehicles, 2025 Softail and LiveWire S2DM/MH/AP EV3. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 25.8.9 Release Date: Week of September 2, 2025. Changes: LiveWire 2024 S2MH: Removal of incorrect Electro Hydraulic Control Unit (EHCU) reflash support; EHCU Module (Part No. 41100123): Addressed issue where module became unrecoverable after failed reflash attempted. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 25.6.4, Release Date: Week of August 19, 2025. Includes New Features and Changes for the Models & Model Years listed. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Initial Release. This bulletin informs dealers that Harley-Davidson has identified a potential concern with the Rear Camshaft Sprockets (Part No. 25400337) on certain 2025 Revolution Max engines. Due to this potential concern from manufacturing of the sprockets, Harley-Davidson is conducting a Product Program for dealerships to pre-emptively replace the sprockets at no charge to the owners of the affected vehicles.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.7.3. Release Date: Week of June 11, 2026. NOTE Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.6.2. Release Date: Week of April 22, 2026. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions. New Features: 2026 Police Vehicle Setup: Civilianize; LiveWire S2: Del Mar (S2DM), Mulholland (S2MH), Alpinista (S2AP) - Calibration bundle 10.2.20: Vehicle Supervisory Controller (VSC) and Onboard Charger (OBC) reflash updates. Changes: 2026 Trike Update Reverse Lockout Reason resize column.

PURPOSE: Revision C. This bulletin informs dealers that an issue was discovered in the Digital Technician II (DT II) software version (26.0.2), released on November 18, 2025. The issue prevents automatic software updates to be installed on your DT II computer. A manual installation of the latest DT II software version (26.4.3) will need to be performed if current DT II software version is (26.0.2), to allow future automatic updates. If a manual update to (26.1.5) or (26.3.2) has previously been completed, DT II will automatically update to (26.4.3) and no additional action is needed.. Revision C. Updated: Purpose for Service Bulletin and Required Dealer Action. Updated to Software Version (26.4.3).

PURPOSE: Revision B. This bulletin informs dealers that an issue was discovered in the Digital Technician II (DT II) software version (26.0.2), released on November 18, 2025. The issue prevents automatic software updates to be installed on your DT II computer. A manual installation of the latest DT II software version (26.3.2) will need to be performed if current DT II software version is (26.0.2), to allow future automatic updates. If a manual update to (26.1.5) or (26.2.1) has previously been completed, DT II will automatically update to (26.3.2) and no additional action is needed. Revision B. 1/28/2026. Updated: Purpose for Service Bulletin and Required Dealer Action. Updated to Software Version (26.3.2). Revision A. 1/16/2026. Updated: Purpose for Service Bulletin and Required Dealer Action. Updated to Software Version (26.2.1).

PURPOSE: Initial Release. This bulletin informs dealers that an issue was discovered in the Digital Technician II (DT II) software version (26.0.2), released on November 18, 2025. The issue prevents automatic software updates to be installed on your DT II computer. A manual installation of the latest DT II software version (26.1.5) will need to be performed, to allow future automatic updates.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version Version 26.8.3, Release Date: Week of July 24, 2026. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions. New Features - Harley-Davidson: 2023-2024 Touring: Updated Electronic Control Module (ECM) calibration offerings. LiveWire: S2DM/MH/AP: Calibration bundle 10.2.28: Telematic Control Unit (TCU) reflash updates. Change: Vehicle Setup: Body Control Module (BCM) Tire Pressure Monitoring System (TPMS) Replacement: Correct issue where tire size selections were not available. System Info Auxiliary Load Controller (ALC): Added Bike configuration field. Data Items Trike ECM: Improved display of Gear Position when in reverse. Amp Added support for (Part No. 76001619).

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.5.2 Release Date: Week of March 30, 2026. NOTE Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions. New Features. 2024: Pan America (RA1250), Pan America Special (RA1250S), CVO Pan America (RA1250SE) Updated Body Control Module (BCM) reflash calibration. 2024-2026: CVO Road Glide ST (FLTRXSTSE) Updated Electronic Control Module (ECM) reflash calibration. 2026: CVO Street Glide ST (FLHXSTSE) Updated ECM reflash calibration. Changes. 2026 Trike Update Reverse Lockout Reason to support new values, Vehicle setup: Gear Indicator Calibration improve operation. 2025-2026 Softail Update reflash for Softail Speedometer (SPDO) enable operation of auxiliary lamp telltale. LiveWire S2 Provide reflash support for Vehicle Supervisory Controller (VSC) hardware (Part No. 41001756RE).

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.4.3 Release Date: Week of February 25, 2026. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). Refer to bulletin M1713 for instructions. New Features: Support for 2026 LiveWire Vehicles, LiveWire S2 Vehicle Status: Display notification when vehicle has unconfigured Electro Hydraulic Control Unit (EHCU) module, Vehicle Setup: New operation to support Anti-lock Braking System (ABS) / EHCU Correction, Reflash: Enabled EHCU calibrations for vehicles previously ineligible for update, requiring ABS / EHCU Correction to be performed. 20212025 Pan America (RA1250), Pan America S (RA1250S), Pan America ST (RA1250ST), CVO Pan America (RA1250SE): Reflash Updated Electronic Control Module (ECM) software calibration to improve quick shifter performance. Changes: Infotainment Control Unit (IFCU) Customization Correct issue where speakers were improperly configured.

PURPOSE: Initial Release. This bulletin informs dealers that all 2026 Revolution Max Powertains will come equipped with oil scavenge screens installed in the clutch and water pump cavities of the oil system. Oil scavenge screens prevent debris from entering the oil pump, potentially causing damage that would require additional inspection and repair to the bottom end of Revolution Max Powertrain.

Purpose: Initial Release. To inform dealers that a new redesigned Fuel Pump Module is available for the Sportster S and Pan America vehicles. The new Fuel Pump Module (Part No. 61200062A) has a larger fuel filter with new media and a slightly different housing to allow for assembly. This new Fuel Pump Module is retrofittable to all older vehicles. The new Fuel Filter (Part No. 61200123) is available separately for service but will only fit the new Fuel Pump Module. DO NOT mix old and new parts. When making warranty repairs, use the new Fuel Pump module (Part No. 61200062A). Return all old inventory of (Part No. 61200062) per Table 4.

PURPOSE: This bulletin informs the dealership network that Harley-Davidson has provided guidelines for battery warranty. REV H. Update section headers: AGM and Lithium-Iron Phosphate Batteries. Add graphics and callouts. Updated: Information on Battery.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update. NOTE: The TECHLINK 3 (PART NUMBER: HD-48650-TL3) supports Controller Area Network (CAN) and J-1850 protocol vehicles. 6-pin CAN vehicles are recommended to use Techlink 3 (TL-3) All 2021 (and later) vehicles must use TL-3 (connects to Red DLC on the vehicle) 4-pin (J-1850) vehicles are recommended to use TL-3. This includes all Fuel Injected Harley-Davidson vehicles 2002 and later. TECHLINK 3 (PART NUMBER: HD-48650-TL3) will not support Buell, VDO and Magneti Marelli vehicles (4-pin DLC). Support for those vehicles is available via TECHLINK II (PART NUMBER: HD-48650-1). Version 26.9.4, Release Date: Week of September 17, 2026. New Features, Changes. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions.

PURPOSE: [Revision C. Updated: Tire Tread Depth Guide. Add tire part numbers 43100063, 43200035,43100029A, 43100033A and 43200045A.] To provide tire tread depth specifications for the dealership network to consult when filling warranty claims on used tires. Please see the Warranty Manual of your region for tire policy guidelines.

PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.