2016 Harley-Davidson Fltru TSBs

PURPOSE: Initial release. This bulletin informs dealers that Harley-Davidson has identified instances of premature engine failure due to abrasive particle wear, specifically from debris inside new aftermarket exhaust headers. Recent evaluations have identified that certain newly manufactured exhaust headers may contain residual hard particles that, if not removed prior to installation, can migrate through the engine system and cause accelerated component wear or severe mechanical damage.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.3.2. Release Date: Week of January 28, 2026. NOTE Software version (26.3.2) will need to be manually installed only if current software version of DT II is (26.0.2). Refer to bulletin M1713 for instructions. New Features: LiveWire. Changes: Revolution Max and all MY2026 vehicles. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 26.1.5. Release Date: Week of December 15, 2025. NOTE: Software version (26.1.5) will need to be manually installed. Refer to bulletin M1713 for instructions. New Features, Changes: 2026 Revolution Max Vehicles (RH975, RH975S, RH1250S, RA1250S, RA1250ST), 2026 Police Body Control Module (BCM), and Tire Pressure Monitoring System (TPMS). NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 26.0.2. Release Date: Week of November 18, 2025. New Features, Changes. 2026 Vehicles, 2025 Softail and LiveWire S2DM/MH/AP EV3. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision B. Updated: Summary. The App has returned to the Apple App Store. This bulletin informs dealers that a recent software update to the Screamin' Eagle Pro Street Tuner application will require the use of a Personal Computer (PC) to complete a Bluetooth Communication Interface (BCI) firmware update.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 25.8.9 Release Date: Week of September 2, 2025. Changes: LiveWire 2024 S2MH: Removal of incorrect Electro Hydraulic Control Unit (EHCU) reflash support; EHCU Module (Part No. 41100123): Addressed issue where module became unrecoverable after failed reflash attempted. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 25.6.4, Release Date: Week of August 19, 2025. Includes New Features and Changes for the Models & Model Years listed. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: This bulletin informs dealers that changes have been made to the Camshaft Drive Gear Retention Kit and service proceduresfor the Milwaukee-Eight and Twin Cam applications. In an effort to increase the clamp load of the camshaft drive sprocket bolted joint and prevent the drive bolt from loosening in high lift camshaft applications, the following changes have been made: a. The camshaft drive bolt final torque has been increased to 40 ft-lbs (54 Nm) for all Milwaukee-Eight and certain Twin Cams models. See Vehicles Affected. This increase in torque will make the bolt a one time use application. Never re-use a camshaft drive bolt for service after tightening to the increased specification. See service manual for updated procedure. b. A new camshaft drive gear retention kit (Part No. 91800088) has been created. This new kit is compatible with all Milwaukee-Eight and Twin Cam engines using Parts and Accessories (P&A) camshaft and Original Equipment (OE) camshaft applications. See Instruction sheet for specific fitment on Twin Cam OE camshaft applications. The new kit utilizes friction washers to prevent unwanted rotation of components in the drive sprocket bolted joint under stress. The use of liquid threadlocker on the threads of the bolt and pre-lube to the head of the bolt flange and outside of the washer help the bolt reach full stretch when tightening. NOTE: Engines produced at all Harley-Davidson Motor Company (HDMC) plants will not come with the new kits installed. They will continue to be produced with (Part No. 25566-06).

PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.

Purpose: To inform dealers of an issue with the bulb wire terminals not being to specification. The light bulbs were used in numerous front and rear fender tip light assemblies for domestic and international applications.

PURPOSE: REVISION. Updated: 2014-2019 to 2014 and later Touring vehicles, and VEHICLES AFFECTED. Harley-Davidson motorcycles are designed, manufactured and tested to be operated with both of the riders hands on the handlebar. If you or a customer are experiencing a handling concern, refer to the TROUBLESHOOTING, HANDLING, IRREGULARITIES found in the MAINTAINANCE chapter of the appropriate service manual. The service manual process is not intended to validate factory settings, but rather to be used if a concern is presented. Through extensive testing, Harley-Davidson has developed the service manual specification and adjustment procedure as the optimum steering head bearing adjustment and verification method to achieve the desired handling characteristics across all speeds and conditions. Addressing a perceived feel of low speed wobble, oscillation or free play by adjusting the steering head bearings beyond the service manual specification may have an adverse effect on motorcycle stability.

BOX GTS SOFTWARE UPDATE. PURPOSE: To notify International dealers that International GTS radios are now available to be ordered and installed in 2014-2018 Touring, CVO Touring and Trike models previously equipped with 6.5 GT radios as retrofittable with additional parts and software as noted. Markets Affected: Only international markets are affected.

Purpose: During recent dealer visits to observe steering head bearing adjustment process, Harley-Davidson staff observed that some dealers are not correctly following the service manual steering head bearing adjustment process. Issue: Steering head bearings on 2014 and later Touring, CVO Touring and Police Touring motorcycles which may not have been adjusted correctly using the service manual procedure at dealerships. Resolution: Never make adjustments by feel. Always follow the process in the appropriate service manual.

Purpose: Technicians have been falsely identifying connecting rod bearings as failed due to a perception of resistance as the rods are rotated. The clearance of the Twin Cam and Milwaukee-Eight crank pin bearings are maintained to a very tight range. This optimizes performance and maintains low mechanical noise in operation. The connecting rod bore can also distort slightly in operation due to stress relaxation. As a result, bearing clearance decreases due to the contact zone broadening and the load being distributed over more rollers. The combination of a bore being slightly out of round and reduced bearing clearance can result in varying degrees of resistance through the range of motion. Axial clearance is also tightly controlled for proper alignment. For these reasons, zones of resistance can be found when the connecting rods are rotated by hand through their range of motion. Resistance during rod motion, by itself, is not an indication of a performance or durability concern.

Reason for Revision: Due to improved kit availability, and for customer and dealer convenience, the "Quarantine and Inspection" process has been removed for all remaining vehicles affected by Safety Recall 0169. All remaining 0169 repairs can proceed directly to the "Wash and Rebuild" process. See Required Dealer Action. Original bulletin release date was July 11, 2016.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version Version 26.8.3, Release Date: Week of July 24, 2026. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions. New Features - Harley-Davidson: 2023-2024 Touring: Updated Electronic Control Module (ECM) calibration offerings. LiveWire: S2DM/MH/AP: Calibration bundle 10.2.28: Telematic Control Unit (TCU) reflash updates. Change: Vehicle Setup: Body Control Module (BCM) Tire Pressure Monitoring System (TPMS) Replacement: Correct issue where tire size selections were not available. System Info Auxiliary Load Controller (ALC): Added Bike configuration field. Data Items Trike ECM: Improved display of Gear Position when in reverse. Amp Added support for (Part No. 76001619).

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.5.2 Release Date: Week of March 30, 2026. NOTE Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions. New Features. 2024: Pan America (RA1250), Pan America Special (RA1250S), CVO Pan America (RA1250SE) Updated Body Control Module (BCM) reflash calibration. 2024-2026: CVO Road Glide ST (FLTRXSTSE) Updated Electronic Control Module (ECM) reflash calibration. 2026: CVO Street Glide ST (FLHXSTSE) Updated ECM reflash calibration. Changes. 2026 Trike Update Reverse Lockout Reason to support new values, Vehicle setup: Gear Indicator Calibration improve operation. 2025-2026 Softail Update reflash for Softail Speedometer (SPDO) enable operation of auxiliary lamp telltale. LiveWire S2 Provide reflash support for Vehicle Supervisory Controller (VSC) hardware (Part No. 41001756RE).

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.4.3 Release Date: Week of February 25, 2026. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). Refer to bulletin M1713 for instructions. New Features: Support for 2026 LiveWire Vehicles, LiveWire S2 Vehicle Status: Display notification when vehicle has unconfigured Electro Hydraulic Control Unit (EHCU) module, Vehicle Setup: New operation to support Anti-lock Braking System (ABS) / EHCU Correction, Reflash: Enabled EHCU calibrations for vehicles previously ineligible for update, requiring ABS / EHCU Correction to be performed. 20212025 Pan America (RA1250), Pan America S (RA1250S), Pan America ST (RA1250ST), CVO Pan America (RA1250SE): Reflash Updated Electronic Control Module (ECM) software calibration to improve quick shifter performance. Changes: Infotainment Control Unit (IFCU) Customization Correct issue where speakers were improperly configured.

Purpose: Revision. Update: Notes for Table 3 and 4. * Updated: Part Numbers. This bulletin informs dealers that all: Twin Cam gear packs on CVO, Dyna, Police, Softail, Touring & Trike models and Milwaukee-Eight gear packs on CVO, Police, Softail, Touring & Trike models ordered after December 04, 2023 will not come with the shift drum, forks, shafts and related hardware. Models Affected: 2006-2017 Twin Cams: Dyna models 2007-2016 Twin Cams: CVO, Police, Touring and Trike models 2007-2017 Twin Cams: Softail models 2017-2024 Milwaukee-Eight: CVO, Police, Touring and Trike models 2018-2024 Milwaukee-Eight: Softail models

Purpose: This bulletin informs dealers that all: Twin Cam gear packs on CVO, Dyna, Police, Softail, Touring & Trike models and Milwaukee-Eight gear packs on CVO, Police, Softail, Touring & Trike models ordered after December 04, 2023 will not come with the shift drum, forks, shafts and related hardware. Note: Resubmission is a correction to Selected Products Section of Transaction ID 24MC44619, NHTSA ID 10248397. Models Affected by M1612 to include only: 2006-2017 Twin Cams: Dyna models 2007-2016 Twin Cams: CVO, Police, Touring and Trike models 2007-2017 Twin Cams: Softail models 2017-2024 Milwaukee-Eight: CVO, Police, Touring and Trike models 2018-2024 Milwaukee-Eight: Softail models

Purpose: This bulletin informs dealers that all: Twin Cam gear packs on CVO, Dyna, Police, Softail, Touring & Trike models and Milwaukee-Eight gear packs on CVO, Police, Softail, Touring & Trike models ordered after December 04, 2023 will not come with the shift drum, forks, shafts and related hardware.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.7.3. Release Date: Week of June 11, 2026. NOTE Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.6.2. Release Date: Week of April 22, 2026. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions. New Features: 2026 Police Vehicle Setup: Civilianize; LiveWire S2: Del Mar (S2DM), Mulholland (S2MH), Alpinista (S2AP) - Calibration bundle 10.2.20: Vehicle Supervisory Controller (VSC) and Onboard Charger (OBC) reflash updates. Changes: 2026 Trike Update Reverse Lockout Reason resize column.

PURPOSE: Revision C. This bulletin informs dealers that an issue was discovered in the Digital Technician II (DT II) software version (26.0.2), released on November 18, 2025. The issue prevents automatic software updates to be installed on your DT II computer. A manual installation of the latest DT II software version (26.4.3) will need to be performed if current DT II software version is (26.0.2), to allow future automatic updates. If a manual update to (26.1.5) or (26.3.2) has previously been completed, DT II will automatically update to (26.4.3) and no additional action is needed.. Revision C. Updated: Purpose for Service Bulletin and Required Dealer Action. Updated to Software Version (26.4.3).

PURPOSE: Revision B. This bulletin informs dealers that an issue was discovered in the Digital Technician II (DT II) software version (26.0.2), released on November 18, 2025. The issue prevents automatic software updates to be installed on your DT II computer. A manual installation of the latest DT II software version (26.3.2) will need to be performed if current DT II software version is (26.0.2), to allow future automatic updates. If a manual update to (26.1.5) or (26.2.1) has previously been completed, DT II will automatically update to (26.3.2) and no additional action is needed. Revision B. 1/28/2026. Updated: Purpose for Service Bulletin and Required Dealer Action. Updated to Software Version (26.3.2). Revision A. 1/16/2026. Updated: Purpose for Service Bulletin and Required Dealer Action. Updated to Software Version (26.2.1).

PURPOSE: Initial Release. This bulletin informs dealers that an issue was discovered in the Digital Technician II (DT II) software version (26.0.2), released on November 18, 2025. The issue prevents automatic software updates to be installed on your DT II computer. A manual installation of the latest DT II software version (26.1.5) will need to be performed, to allow future automatic updates.

Revision: Added Dealer inventory instructions. Purpose for Service Bulletin: To inform dealers of a new coolant pump replacement kit for 2014 - 2016 Twin Cooled vehicles. Markets Affected: All markets are affected.

PURPORSE: Revision T. The purpose of this bulletin is to inform the dealer network that a software update to the GRX-3110 and DCA-8000 is now available. DYNAMIC DIAGNOSTIC CHARGER SYSTEM (PART NUMBER: DCA-8000). [Rev T] Updated: New Software Update, Previous Software Updates and DCA-8000. Added: 192-210335P. Software update 192-210335P for GRX-3110 and DCA-800 to add new battery part numbers.

PURPOSE: Revision E. Added: Added procedures for the DCA-8000 E Battery Tester.* Updated: All sections. This bulletin informs the dealership network that Harley-Davidson has provided guidelines for battery warranty.

PURPOSE: This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.8.8. Release Date: Week of August 5, 2024. New Features for Harley-Davidson vehicles: Advanced Module Replace for 2021 and later Revolution Max; 2023 and later CVO Touring; and 2024 Street Glide (FLHX), Road Glide (FLTRX). New Features for LiveWire vehicles: Updated calibrations for 2024 S2DM EV1/ EV6; 2024 S2MH EV1; and 2024 S2DM, S2MH. Changes: Added Hand Control Module (HCM) (Part No. 71500522A and 71500536A) for reflash support.

Purpose is to notify dealers that the Smart Tune PRO ? Automatic Tuning Module is 50-state U.S. EPA approved and released for shipment.

INFOTAINMENT SOFTWARE RELEASE 1.20.2 MAY CAUSE THE INFOTAINMENT SYSTEM TO FREEZE AND BECOME NON-RESPONSIVE TO INPUTS FROM THE HAND CONTROLS, SOFT KEYS, OR TOUCH SCREEN. AN IGNITION CYCLE OFF-ON MAY GET THE SYSTEM TO RESPOND OR IT MAY NOT. IF A CUSTOMER IS EXPERIENCING THIS ISSUE, UPDATE SOFTWARE TO RELEASE 1.20.3.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update. NOTE: The TECHLINK 3 (PART NUMBER: HD-48650-TL3) supports Controller Area Network (CAN) and J-1850 protocol vehicles. 6-pin CAN vehicles are recommended to use Techlink 3 (TL-3) All 2021 (and later) vehicles must use TL-3 (connects to Red DLC on the vehicle) 4-pin (J-1850) vehicles are recommended to use TL-3. This includes all Fuel Injected Harley-Davidson vehicles 2002 and later. TECHLINK 3 (PART NUMBER: HD-48650-TL3) will not support Buell, VDO and Magneti Marelli vehicles (4-pin DLC). Support for those vehicles is available via TECHLINK II (PART NUMBER: HD-48650-1). Version 26.9.4, Release Date: Week of September 17, 2026. New Features, Changes. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions.

instrument gauges including speedometer and tachometers. This may occur after exposure of the vehicle to humid conditions. This condition may remain even after the moisture has evaporated.

instrument gauges including speedometer and tachometers. This may occur after exposure of the vehicle to humid conditions. This condition may remain even after the moisture has evaporated.

PURPOSE: Initial release. This bulletin informs dealers of changes to the Inner Primary Seal (Part No. 12052). The seal part number was changed from (Part No. 12052A, black in color) to (Part No. 12052B, brown in color). A new Inner Primary Seal (Part No. 12052C) has been released and the color has been changed back to black.

PURPOSE: Revision. Some 2009 - 2020 Touring, Touring CVO, Touring Police models exhibit drainage of rusty water from the rear fork (where the debris deflector mounts), which has raised customer concern. Updated Model Years. NOTE: This is a cosmetic concern and not an indication of an internal issue.

AUDIO - GENERAL INFORMATION AND SOFTWARE UPDATE 1.22.X. PURPOSE: Revision. This bulletin helps the dealer locate needed information to update and service Boom! Box Audio Infotainment systems. It also lists software revisions and the fixes addressed in each revision. This bulletin also replaces the following documents: TT431A: Software Download and Warranty Information, M1346: Boom! Box Audio System Software Update, M1344E: Boom! Box Infotainment System General Information and Procedures, M1442: Box Infotainment System General Information and Software Release 1.21.X Description, and The Boom! Box Infotainment System Job Aid located on h-dnet.com

BOX AUDIO INFOTAINMENT SYSTEMS. IT ALSO LISTS SOFTWARE REVISIONS AND THE FIXES ADDRESSED IN EACH REVISION.

PURPORSE: Revision U. The purpose of this bulletin is to inform the dealer network that a software update to the GRX-3110 and DCA-8000 is now available. DYNAMIC DIAGNOSTIC CHARGER SYSTEM (PART NUMBER: DCA-8000). [Rev U] Added: Description of improvements made to the testing algorithm for GRX software Version P and DCA-8000 software Version E.

PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.6.4. Release Date: Week of May 1, 2024. New Features for LiveWire S2DM and S2MH, 2024 Revolution Max, and 2024 Touring.

BEEN REMOVED FOR ALL REMAINING VEHICLES AFFECTED BY SAFETY RECALL 0169. ALL REMAINING 0169 REPAIRS CAN PROCEED DIRECTLY TO THE WASH AND REBUILD PROCESS. SEE REQUIRED DEALER ACTION. ORIGINAL BULLETIN RELEASE DATE WAS JULY 11, 2016.