2023 Harley-Davidson Fltrt TSBs

PURPOSE: Initial release. This bulletin informs dealers that cosmetic staining or etching on the inside of the cylinder bore does not have an impact on engine performance, oil consumption, or overall functionality. This bulletin provides example images of cylinders with cosmetic staining, and images of cases where cylinder replacement would be recommended.

PURPOSE: Revision C. To inform dealers of a running change for the new reverse motor (Part No. 83388-09C) for Trike models. As of January 28, 2020 all Trike platform vehicles will be manufactured using the new reverse motor. The new reverse motor will be used to replace reverse motor assemblies (Part No. 83388-09, 83388-09A,83388-09B) that have failed diagnostics. Refer to Table 3. This motor contains several improvements for better motor durability. A new procedure has been added, Refer to PINION EXTENDS BUT REVERSE MOTOR STALLS OR SPINS SLOWLY. REV D: Updated: Guide. Add link to: PINION EXTENDS BUT REVERSE MOTOR STALLS OR SPINS SLOWLY

PURPOSE: Initial release. This bulletin informs dealers that Harley-Davidson has identified instances of premature engine failure due to abrasive particle wear, specifically from debris inside new aftermarket exhaust headers. Recent evaluations have identified that certain newly manufactured exhaust headers may contain residual hard particles that, if not removed prior to installation, can migrate through the engine system and cause accelerated component wear or severe mechanical damage.

PURPOSE: Revision C. To inform dealers of a running change for the new reverse motor (Part No. 83388-09C) for Trike models. As of January 28, 2020 all Trike platform vehicles will be manufactured using the new reverse motor. The new reverse motor will be used to replace reverse motor assemblies (Part No. 83388-09, 83388-09A,83388-09B) that have failed diagnostics. Refer to Table 3. This motor contains several improvements for better motor durability. A new procedure has been added, Refer to PINION EXTENDS BUT REVERSE MOTOR STALLS OR SPINS SLOWLY. REV C: Update Removal and Assembly (R&I) of the Solenoid. Updated: DISASSEMBLE, ASSEMBLE and Install Electrical Kit.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.3.2. Release Date: Week of January 28, 2026. NOTE Software version (26.3.2) will need to be manually installed only if current software version of DT II is (26.0.2). Refer to bulletin M1713 for instructions. New Features: LiveWire. Changes: Revolution Max and all MY2026 vehicles. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 26.1.5. Release Date: Week of December 15, 2025. NOTE: Software version (26.1.5) will need to be manually installed. Refer to bulletin M1713 for instructions. New Features, Changes: 2026 Revolution Max Vehicles (RH975, RH975S, RH1250S, RA1250S, RA1250ST), 2026 Police Body Control Module (BCM), and Tire Pressure Monitoring System (TPMS). NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 26.0.2. Release Date: Week of November 18, 2025. New Features, Changes. 2026 Vehicles, 2025 Softail and LiveWire S2DM/MH/AP EV3. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision B. Updated: Summary. The App has returned to the Apple App Store. This bulletin informs dealers that a recent software update to the Screamin' Eagle Pro Street Tuner application will require the use of a Personal Computer (PC) to complete a Bluetooth Communication Interface (BCI) firmware update.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 25.8.9 Release Date: Week of September 2, 2025. Changes: LiveWire 2024 S2MH: Removal of incorrect Electro Hydraulic Control Unit (EHCU) reflash support; EHCU Module (Part No. 41100123): Addressed issue where module became unrecoverable after failed reflash attempted. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update Version 25.6.4, Release Date: Week of August 19, 2025. Includes New Features and Changes for the Models & Model Years listed. NOTE: Digital Technician II (DT II) supports additional Harley-Davidson motorcycle models and model years outside of those listed.

PURPOSE: Revision (A) * Updated: Summary, Update table. This bulletin informs of the availability of the SYN3 New Improved Formula, a dual weight SAE 15W50 / SAE 50 Motorcycle Oil. The new formula transitions into inventory as the old SYN3 20W50 product inventory is depleted. Availability varies by SKU and region. The original SYN3 20W50 will be obsoleted when the transition is complete.

PURPOSE: This bulletin informs of the availability of the SYN3 New Improved Formula, a dual weight SAE 15W50 / SAE 50 Motorcycle Oil. The new formula transitions into inventory as the old SYN3 20W50 product inventory is depleted. Availability varies by SKU and region. The original SYN3 20W50 will be obsoleted when the transition is complete.

PURPOSE: This bulletin informs dealers that changes have been made to the Camshaft Drive Gear Retention Kit and service proceduresfor the Milwaukee-Eight and Twin Cam applications. In an effort to increase the clamp load of the camshaft drive sprocket bolted joint and prevent the drive bolt from loosening in high lift camshaft applications, the following changes have been made: a. The camshaft drive bolt final torque has been increased to 40 ft-lbs (54 Nm) for all Milwaukee-Eight and certain Twin Cams models. See Vehicles Affected. This increase in torque will make the bolt a one time use application. Never re-use a camshaft drive bolt for service after tightening to the increased specification. See service manual for updated procedure. b. A new camshaft drive gear retention kit (Part No. 91800088) has been created. This new kit is compatible with all Milwaukee-Eight and Twin Cam engines using Parts and Accessories (P&A) camshaft and Original Equipment (OE) camshaft applications. See Instruction sheet for specific fitment on Twin Cam OE camshaft applications. The new kit utilizes friction washers to prevent unwanted rotation of components in the drive sprocket bolted joint under stress. The use of liquid threadlocker on the threads of the bolt and pre-lube to the head of the bolt flange and outside of the washer help the bolt reach full stretch when tightening. NOTE: Engines produced at all Harley-Davidson Motor Company (HDMC) plants will not come with the new kits installed. They will continue to be produced with (Part No. 25566-06).

PURPOSE:To inform dealers of a running change for the new reverse motor (Part No. 83388-09C) for Trike models. As of January 28, 2020 all Trike platform vehicles will be manufactured using the new reverse motor. The new reverse motor will be used to replace reverse motor assemblies (Part No. 83388-09,83388-09A,83388-09B) that have failed diagnostics. Refer to Table 3. This motor contains several improvements for better motor durability. A new procedure has been added, Refer to PINION EXTENDS BUT REVERSE MOTOR STALLS OR SPINS SLOWLY. Revision A. Released 1-2-2025. Added section: PINION EXTENDS BUT REVERSE MOTOR STALLS OR SPINS SLOWLY. Added: PINION EXTENDS BUT REVERSE MOTOR STALLS OR SPINS SLOWLY. Revision B. Release 1-3-2025. Added 2025 models. Updated: Motorcycles Affected.

PURPOSE: To inform dealerships of a new Vehicle Identification Number (VIN) and Calibration search function for the Screamin' Eagle Pro Street Tuner (Bluetooth).

PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.

PURPOSE: To inform California dealers about the new California Air Resources Board (CARB) approvals for select 2021-2022 Harley-Davidson vehicles. Summary: Various Screamin' Eagle Air Cleaner Kits and Stage I calibrations have been approved for sale on select 2021 and 2022 Harley-Davidson models. Please see the table that indicates which part numbers should be ordered for what models.

PURPOSE: To inform California dealers about the new California Air Resources Board (CARB) approvals. Screamin' Eagle Quickshifter and Screamin' Eagle Extreme Flow 55mm Intake Manifold.

PURPOSE: Revision I to L - Updated Document History. Updated Summary. Rev L thru J 7/27/2023 - Updated Summary: Screamin Eagle Stage kit calibration dates for various models. Rev H 5/26/2023 - Updated Summary: Updated: Jan 2, 2023 Softail calibration info. Added: July 2023 Softail calibration info for FXBR, FXLRS, FXLRST models. Rev I 5/26/2023 - Updated Summary: Updated: Trike Stage I and II July calibrations to "Now Available". To inform 49-State US, Canada, Mexico, and ANZ dealerships of the Screamin' Eagle calibration schedule as it relates to 2023 vehicles. Markets Affected: United States (excluding California), Canada, Mexico and New Zealand. Revision: Updated timing for 2023 DTII Screamin Eagle calibrations.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version Version 26.8.3, Release Date: Week of July 24, 2026. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions. New Features - Harley-Davidson: 2023-2024 Touring: Updated Electronic Control Module (ECM) calibration offerings. LiveWire: S2DM/MH/AP: Calibration bundle 10.2.28: Telematic Control Unit (TCU) reflash updates. Change: Vehicle Setup: Body Control Module (BCM) Tire Pressure Monitoring System (TPMS) Replacement: Correct issue where tire size selections were not available. System Info Auxiliary Load Controller (ALC): Added Bike configuration field. Data Items Trike ECM: Improved display of Gear Position when in reverse. Amp Added support for (Part No. 76001619).

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.5.2 Release Date: Week of March 30, 2026. NOTE Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions. New Features. 2024: Pan America (RA1250), Pan America Special (RA1250S), CVO Pan America (RA1250SE) Updated Body Control Module (BCM) reflash calibration. 2024-2026: CVO Road Glide ST (FLTRXSTSE) Updated Electronic Control Module (ECM) reflash calibration. 2026: CVO Street Glide ST (FLHXSTSE) Updated ECM reflash calibration. Changes. 2026 Trike Update Reverse Lockout Reason to support new values, Vehicle setup: Gear Indicator Calibration improve operation. 2025-2026 Softail Update reflash for Softail Speedometer (SPDO) enable operation of auxiliary lamp telltale. LiveWire S2 Provide reflash support for Vehicle Supervisory Controller (VSC) hardware (Part No. 41001756RE).

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.4.3 Release Date: Week of February 25, 2026. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). Refer to bulletin M1713 for instructions. New Features: Support for 2026 LiveWire Vehicles, LiveWire S2 Vehicle Status: Display notification when vehicle has unconfigured Electro Hydraulic Control Unit (EHCU) module, Vehicle Setup: New operation to support Anti-lock Braking System (ABS) / EHCU Correction, Reflash: Enabled EHCU calibrations for vehicles previously ineligible for update, requiring ABS / EHCU Correction to be performed. 20212025 Pan America (RA1250), Pan America S (RA1250S), Pan America ST (RA1250ST), CVO Pan America (RA1250SE): Reflash Updated Electronic Control Module (ECM) software calibration to improve quick shifter performance. Changes: Infotainment Control Unit (IFCU) Customization Correct issue where speakers were improperly configured.

PURPOSE: Revision. This bulletin informs dealers that (Part No. 33900172) is obsolete. Dealers must purchase the updated bearing door when installing the new shift drum on 2017-2024 Milwaukee-Eight vehicles. Revision B. Updated: Required Dealer Action. Updated sentence for M8 Transmission built before Oct 4, 2023.

PURPOSE: This bulletin informs dealers that (Part No. 33900172) is obsolete. Dealers must purchase the updated bearing door when installing the new shift drum on 2017-2024 Milwaukee-Eight vehicles. Revision A. Updated: Purpose for Service Bulletin. Part No. 33900172) is obsolete.

Purpose: Revision. Update: Notes for Table 3 and 4. * Updated: Part Numbers. This bulletin informs dealers that all: Twin Cam gear packs on CVO, Dyna, Police, Softail, Touring & Trike models and Milwaukee-Eight gear packs on CVO, Police, Softail, Touring & Trike models ordered after December 04, 2023 will not come with the shift drum, forks, shafts and related hardware. Models Affected: 2006-2017 Twin Cams: Dyna models 2007-2016 Twin Cams: CVO, Police, Touring and Trike models 2007-2017 Twin Cams: Softail models 2017-2024 Milwaukee-Eight: CVO, Police, Touring and Trike models 2018-2024 Milwaukee-Eight: Softail models

Purpose: This bulletin informs dealers that all: Twin Cam gear packs on CVO, Dyna, Police, Softail, Touring & Trike models and Milwaukee-Eight gear packs on CVO, Police, Softail, Touring & Trike models ordered after December 04, 2023 will not come with the shift drum, forks, shafts and related hardware. Note: Resubmission is a correction to Selected Products Section of Transaction ID 24MC44619, NHTSA ID 10248397. Models Affected by M1612 to include only: 2006-2017 Twin Cams: Dyna models 2007-2016 Twin Cams: CVO, Police, Touring and Trike models 2007-2017 Twin Cams: Softail models 2017-2024 Milwaukee-Eight: CVO, Police, Touring and Trike models 2018-2024 Milwaukee-Eight: Softail models

Purpose: This bulletin informs dealers that all: Twin Cam gear packs on CVO, Dyna, Police, Softail, Touring & Trike models and Milwaukee-Eight gear packs on CVO, Police, Softail, Touring & Trike models ordered after December 04, 2023 will not come with the shift drum, forks, shafts and related hardware.

PURPOSE: This bulletin informs dealers of a transmission shift drum running change to all variants of the Milwaukee-Eight powertrain. Starting on October 4, 2023 all Milwaukee-Eight CVO, Police, Softail, Touring and Trike models will be assembled using a common shift drum. The new shift drum (Part No. 33900265) is replacing the old shift drum (Part No. 33900172). The new shift drum was developed to include the "D" shaft on the end to interface with the Gear Position Sensor on 2023 CVO Street Glide (FLHXSE) and Road Glide (FLTRXSE). For all other Milwaukee-Eight models, the bearing door has been modified by adding a pocket to accept the "D" shaft of the new shift drum.

PURPOSE: Initial Release. This bulletin informs dealers and technicians that there are Parts and Accessories (P&A) Wiring Schematics for Harley-Davidson Audio Powered by Rockford Fosgate components. Schematics are available for both Non Center-Cooled and Center-Cooled models.

PURPORSE: Revision T. The purpose of this bulletin is to inform the dealer network that a software update to the GRX-3110 and DCA-8000 is now available. DYNAMIC DIAGNOSTIC CHARGER SYSTEM (PART NUMBER: DCA-8000). [Rev T] Updated: New Software Update, Previous Software Updates and DCA-8000. Added: 192-210335P. Software update 192-210335P for GRX-3110 and DCA-800 to add new battery part numbers.

PURPOSE: This bulletin informs the dealership network that Harley-Davidson has provided guidelines for battery warranty. REV H. Update section headers: AGM and Lithium-Iron Phosphate Batteries. Add graphics and callouts. Updated: Information on Battery.

PURPOSE: [Revision G: Updated: Information on Battery. Update section headers: AGM and Lithium-Ion Batteries.] This bulletin informs the dealership network that Harley-Davidson has provided guidelines for battery warranty.

PURPOSE: [Revision F. Added: Added video link for the DCA-8000 Battery Tester. Added: Supplemental Procedure Video.] This bulletin informs the dealership network that Harley-Davidson has provided guidelines for battery warranty.

PURPOSE: Revision E. Added: Added procedures for the DCA-8000 E Battery Tester.* Updated: All sections. This bulletin informs the dealership network that Harley-Davidson has provided guidelines for battery warranty.

PURPOSE: This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.8.8. Release Date: Week of August 5, 2024. New Features for Harley-Davidson vehicles: Advanced Module Replace for 2021 and later Revolution Max; 2023 and later CVO Touring; and 2024 Street Glide (FLHX), Road Glide (FLTRX). New Features for LiveWire vehicles: Updated calibrations for 2024 S2DM EV1/ EV6; 2024 S2MH EV1; and 2024 S2DM, S2MH. Changes: Added Hand Control Module (HCM) (Part No. 71500522A and 71500536A) for reflash support.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.7.3. Release Date: Week of June 11, 2026. NOTE Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 26.6.2. Release Date: Week of April 22, 2026. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions. New Features: 2026 Police Vehicle Setup: Civilianize; LiveWire S2: Del Mar (S2DM), Mulholland (S2MH), Alpinista (S2AP) - Calibration bundle 10.2.20: Vehicle Supervisory Controller (VSC) and Onboard Charger (OBC) reflash updates. Changes: 2026 Trike Update Reverse Lockout Reason resize column.

PURPOSE: Revision C. This bulletin informs dealers that an issue was discovered in the Digital Technician II (DT II) software version (26.0.2), released on November 18, 2025. The issue prevents automatic software updates to be installed on your DT II computer. A manual installation of the latest DT II software version (26.4.3) will need to be performed if current DT II software version is (26.0.2), to allow future automatic updates. If a manual update to (26.1.5) or (26.3.2) has previously been completed, DT II will automatically update to (26.4.3) and no additional action is needed.. Revision C. Updated: Purpose for Service Bulletin and Required Dealer Action. Updated to Software Version (26.4.3).

PURPOSE: Revision B. This bulletin informs dealers that an issue was discovered in the Digital Technician II (DT II) software version (26.0.2), released on November 18, 2025. The issue prevents automatic software updates to be installed on your DT II computer. A manual installation of the latest DT II software version (26.3.2) will need to be performed if current DT II software version is (26.0.2), to allow future automatic updates. If a manual update to (26.1.5) or (26.2.1) has previously been completed, DT II will automatically update to (26.3.2) and no additional action is needed. Revision B. 1/28/2026. Updated: Purpose for Service Bulletin and Required Dealer Action. Updated to Software Version (26.3.2). Revision A. 1/16/2026. Updated: Purpose for Service Bulletin and Required Dealer Action. Updated to Software Version (26.2.1).

PURPOSE: Initial Release. This bulletin informs dealers that an issue was discovered in the Digital Technician II (DT II) software version (26.0.2), released on November 18, 2025. The issue prevents automatic software updates to be installed on your DT II computer. A manual installation of the latest DT II software version (26.1.5) will need to be performed, to allow future automatic updates.

PURPOSE: [Revision C. Updated: Tire Tread Depth Guide. Add tire part numbers 43100063, 43200035,43100029A, 43100033A and 43200045A.] To provide tire tread depth specifications for the dealership network to consult when filling warranty claims on used tires. Please see the Warranty Manual of your region for tire policy guidelines.

PURPOSE: [Revision B. Updated: Tire Tread Depth Guide. Add tire part numbers 43200063 and 43200038A.] To provide tire tread depth specifications for the dealership network to consult when filling warranty claims on used tires. Please see the Warranty Manual of your region for tire policy guidelines. Updated: Tire Tread Guide. Add tire part number 43100038B. Update tire tread depth, adjustment and reimbursement.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.6.4. Release Date: Week of May 1, 2024. New Features for LiveWire S2DM and S2MH, 2024 Revolution Max, and 2024 Touring.

PURPOSE: This bulletin informs dealers that there is a running change for the oil pan fastener on all Milwaukee-Eight powered Softail and Touring models. As of Monday July 31, 2023, Powertrain Operations (PTO) in Menomonee Falls, WI is building all Milwaukee-Eight Softail and Touring powertrain models with new oil pan fasteners (Part No. 12600369). The old fasteners (Part No. 4741A) will still remain available for dealer purchase. The oil pans for the Softail and Touring models were updated to accept the new fastener geometry. Their Part Numbers have been superseded to (-A). Touring will be (Part No. 24400180A) and Softail will be (Part No. 24400208A). The new fastener will not fit with an old oil pan but the old hardware will still be available for dealer purchase. The old fastener CAN be used with a new (-A) oil pans. The fastener torque has not been changed.

PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). New Software Update. NOTE: The TECHLINK 3 (PART NUMBER: HD-48650-TL3) supports Controller Area Network (CAN) and J-1850 protocol vehicles. 6-pin CAN vehicles are recommended to use Techlink 3 (TL-3) All 2021 (and later) vehicles must use TL-3 (connects to Red DLC on the vehicle) 4-pin (J-1850) vehicles are recommended to use TL-3. This includes all Fuel Injected Harley-Davidson vehicles 2002 and later. TECHLINK 3 (PART NUMBER: HD-48650-TL3) will not support Buell, VDO and Magneti Marelli vehicles (4-pin DLC). Support for those vehicles is available via TECHLINK II (PART NUMBER: HD-48650-1). Version 26.9.4, Release Date: Week of September 17, 2026. New Features, Changes. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions.

PURPORSE: Revision U. The purpose of this bulletin is to inform the dealer network that a software update to the GRX-3110 and DCA-8000 is now available. DYNAMIC DIAGNOSTIC CHARGER SYSTEM (PART NUMBER: DCA-8000). [Rev U] Added: Description of improvements made to the testing algorithm for GRX software Version P and DCA-8000 software Version E.

PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.