Powered byNHTSA|EPA|Community Reports|Updated

2017 Harley-Davidson Flhtk Anv TSBs

4 Technical Service Bulletins across 1 categories

Engine

4 bulletins
10176175

GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1097 INTERNATIONAL FITMENT: THE BOOM!

Read full bulletin

BOX GTS SOFTWARE UPDATE. PURPOSE: To notify International dealers that International GTS radios are now available to be ordered and installed in 2014-2018 Touring, CVO Touring and Trike models previously equipped with 6.5 GT radios as retrofittable with additional parts and software as noted. Markets Affected: Only international markets are affected.

10173477

SERVICE BULLETIN M1510: MILWAUKEE-EIGHT ENGINE - NEW OIL FILTER.

Read full bulletin

REVISION. PURPOSE: To inform dealers of an improved oil filter for the Milwaukee-Eight (MKE-8) engine. The new oil filter uses the same synthetic 5-micron media as the current filter, however, the new oil filter effective media surface area was increased by 25%. The increased media supports the higher oil flow rate of MKE-8 engines. Fitment, clearance and performance testing has only been performed on MKE-8 vehicles. All Twin Cam vehicles continue to use the current oil filter.

10173463

SERVICE BULLETIN M1510: MILWAUKEE-EIGHT ENGINE - NEW OIL FILTER.

Read full bulletin

REVISION. PURPOSE: To inform dealers of an improved oil filter for the Milwaukee-Eight (MKE-8) engine. The new oil filter uses the same synthetic 5-micron media as the current filter, however, the new oil filter effective media surface area was increased by 25%. The increased media supports the higher oil flow rate of MKE-8 engines. Fitment, clearance and performance testing has only been performed on MKE-8 vehicles. All Twin Cam vehicles continue to use the current oil filter.

10172231

SERVICE BULLETIN M1509: MILWAUKEE-EIGHT CYLINDER FLANGE NUT USAGE.

Read full bulletin

To Inform dealers of a service manual change. This change affects the flange nut attaching the cylinder/cylinder head assembly to the cylinder stud in all MKE-8 (Milwaukee-Eight) engines. The flange nut is one-time use and is replaced after removing. An additional change is the lubrication of the flange nut. Verify that only the bottom of the flange nut receives lubrication. Do not allow lubrication on the cylinder stud or on the internal threads of the flange nut. Motorcycles Affected: Vehicles with the MKE-8 engine From 2017 - 2020.