Powered byNHTSA|EPA|Community Reports|Updated

2022 Grand Design Solitude TSBs

7 Technical Service Bulletins across 4 categories

Electrical

3 bulletins
11026622

Grand Design is addressing concerns of excessive frame flex or wall securement in the front upper deck area of a limited number of fifth-wheel units.

Read full bulletin

This condition could potentially occur over time due to a combination of manufacturing variations, an overload condition, or hitch modifications. Wall securement or excessive frame flex does not compromise vehicle safety or structural integrity of the coach as verified by third-party experts. This service campaign covers 2020-2023 Grand Design Solitude and Momentum fifth wheel products that are 18,000lbs GVWR and over.

11007856

7-Way Strain Relief Relocation.

Read full bulletin

Current strain relief needs relocated to provide additional securement to the 7-way cord.

10233218

Wiring to the remote start/stop switch of the generator at the GenSet panel is wired incorrectly.

Read full bulletin

During use, the generator must be unplugged to shut down. This is ONLY on Solitude units with factory installed generator package. Gen prep not affected.

Other

2 bulletins
11007851

Broken Interior Step treads.

Read full bulletin

Steps may break at the riser due to the amount of overhang.

10253005

TSB 24-001 Issued in March on March 7th.

Read full bulletin

Concern: Complaint of upper deck flex which results in cosmetic damages to the interior and excessive flex at the pin box. Remedy : The procedure outlined in attached summary to assess damages if any and direct customers to the next steps.

Lighting

1 bulletin
10219688

The rear upper deck on Solitude ST390RK models produced prior to June 6, 2022 may not be properly supported.

Read full bulletin

As a result, the rear upper deck floor may sag slightly at the sidewalls. Remedy: The remedy includes the use of additional fasteners (961113 - Screw 14x1 Hex Waster Type a Zinc, 960736- #625 Tri-fold LG FLG Alum .39-.354 Grip Rivet) and support bracing. (512064 - 1x2 Stuffed AL Tube, 512065 - 2x3 Stuffed AL Tube)

Body & Paint

1 bulletin
10217898

Newly designed lippert upper deck leaves space between pin box and bulkhead.

Read full bulletin

This creates the potential for water intrusion from road spray. The remedy is to install a filler plate (part number #110460)