2026 GMC Yukon XL TSBs
218 Technical Service Bulletins across 15 categories
Categories
Engine
39 bulletinsThis Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is currently...
Read full bulletin
investigating.
This preliminary information communicates an issue with of a service theft message after using the rear window defogger.
Read full bulletin
Engineering is currently investigating.
This Preliminary information communicates an issue with the virtual garage door opener not programming to a garage opener.
Read full bulletin
Engineering is working on a new module.
This preliminary information communicates an issue with of a service theft message after using the rear window defogger.
Read full bulletin
Engineering is currently investigating.
This preliminary information communicates an issue with a service column lock message and DTC U3000.
Read full bulletin
Engineering is working on the issue and in the meantime dealerships are to reset/clear the DTC and perform four sleep cycles to verify the DTC does not return.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This PI communicates information to inform customer that Engineering is aware of concern where the heated seats are...
Read full bulletin
inoperative when interior temp is above 86Fand are working on a repair solution.
Improves transmission diagnostic software.
Read full bulletin
Reduces unnecessary check engine light activations. Improved braking performance and reduced unnecessary messages and alerts
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This Preliminary information communicates an issue with the virtual garage door opener not programming to a garage opener.
Read full bulletin
Engineering is working on a new module.
This Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is currently...
Read full bulletin
investigating.
This Preliminary information communicates to the technician on the a potential cause for Buzz/rattle/vibration/ from the...
Read full bulletin
passenger side when the vehicle is under light load, with a 3.0L LZ0 Engine. It also addresses the potential for a slow/no crank or not charging.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This PI informs General Motors dealers that programming for the Image Processing Module is currently unavailable and...
Read full bulletin
provides the process to obtain required programming
This Preliminary information communicates an issues with the HVAC making a hum buzz noise when the blower is set to a higher speed.
Read full bulletin
Engineering is working on a new HVAC door seal material to correct the noise.
Fog lamp control may be missing from radio display after a BCM update.
Read full bulletin
Engineering is investigating.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This preliminary information is to inform technicians and customers that the voice command will be inoperative when trying to open applications.
Read full bulletin
Engineering is investigating and this PI will be converted to a bulletin when a repair is available.
This PI informs General Motors dealers that programming for the Image Processing Module is currently unavailable and...
Read full bulletin
provides the process to obtain required programming
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This Preliminary information communicates an issue with the virtual garage door opener not programming to a garage opener.
Read full bulletin
Engineering is working on a new module.
This Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is currently...
Read full bulletin
investigating.
This Preliminary information communicates that Engineering is working on a resolution and no parts should be replaced at...
Read full bulletin
this time.
This Preliminary information communicates to the technician on the a potential cause for Buzz/rattle/vibration from the...
Read full bulletin
passenger side when the vehicle is under light load, with a 3.0L LZ0 Engine.
This Preliminary information communicates an issue with blower motor speed changing when air flow is blocked by snow.
This PI communicates information that the Collision / Detection Systems will revert to default setting of Alert and...
Read full bulletin
Brake after an Ignition Cycle due to an Engineering change.
This Preliminary information communicates an issues with the HVAC making a hum buzz noise when the blower is set to a higher speed.
Read full bulletin
Engineering is working on a new HVAC door seal material to correct the noise.
This Preliminary Information communication provides information to the technician about vehicles that have had multiple...
Read full bulletin
repair attempts that are being performed on customers vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
This preliminary information communicates an issue with a Service Brake system message and DTC C0597 C055F.
Read full bulletin
Dealers are to replace the brake master cylinder.
This preliminary information communicates an issue with a Service Brake system message and DTC C0597.
Read full bulletin
Dealers are to replace the brake master cylinder.
PIP6091 was created to advise technicians engineering is aware of a misfire during a passing maneuver is being...
Read full bulletin
investigated.
This PI communicates information that the Collision / Detection Systems will revert to default setting of Alert and...
Read full bulletin
Brake after an Ignition Cycle due to an Engineering change.
This PI communicates information that the Collision / Detection Systems will revert to default setting of Alert and...
Read full bulletin
Brake after an Ignition Cycle due to an Engineering change.
This Preliminary Information communication provides information to the technician about fluid leaking from the brake...
Read full bulletin
caliper piston area found during a service of the vehicle. The substance is actually excess assembly grease from the caliper boot and piston.
This preliminarily information communication an issue with the supercruise dropping out when next to a merging lane and...
Read full bulletin
engineering is investigating.
This preliminary information advises dealers that Engine Control Module designation E90 is on a ordering restriction...
Read full bulletin
through technical assistance.
This Preliminary information communicates an issue with the virtual garage door opener not programming to a garage opener.
Read full bulletin
Engineering is working on a new module.
This Preliminary information communicates Engineering is investigating a no audio issue.
Other
39 bulletinsThis preliminary information is to help technicians decide if the DTC needs to be diagnosed if relating to the concern...
Read full bulletin
and if it is not, the DTC can be ignored.
This preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
This PI provides Diagnostics tips on how the LIN bus works and how to diagnosis it.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary information communicates to the technicians a diagnostic tip if a technician loses communication with...
Read full bulletin
the image processor #2 and how to restore communication
This Preliminary information communicates ordering process for the night vision camera that are on restriction for all...
Read full bulletin
listed vehicles for Technical Assistance review.
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
This preliminary information is to inform technicians to not replace any parts and the vehicle is still operational.
Read full bulletin
The PI will be converted to a bulletin when the repair is available.
This PI states that if SDGM DTC P0604/P0607 is set and no other SDGM DTCs are present, clear DTCs and reset the SDGM.
Read full bulletin
Advises of how to contact PQC to authorize SDGM replacement.
This preliminary information is to inform technicians and customers that the HUD will not retain its current settings.
Read full bulletin
No parts should be replaced.
This Preliminary information communicates ordering process for the night vision camera that are on restriction for all...
Read full bulletin
listed vehicles for Technical Assistance review.
This Preliminary information communicates ordering process for the night vision camera that are on restriction for all...
Read full bulletin
listed vehicles for Technical Assistance review.
Pi created to provide GM dealers with information on gathering information for projection issue
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
This Preliminary information communicates ordering process for the night vision camera that are on restriction for all...
Read full bulletin
listed vehicles for Technical Assistance review.
This preliminary information is to inform technicians to not replace any parts and the vehicle is still operational.
Read full bulletin
The PI will be converted to a bulletin when the repair is available.
This PI communicates that the u013A code setting requires no repairs on Export Vehicles.
Improvements to reliability when extending the running boards on your vehicle.
This Preliminary information communicates the steps on how to save a GDS2 Session Log and upload to a Technical...
Read full bulletin
Assistance Case in CX Connect.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary information communicates to the field about a normal condition about a message that appears when using...
Read full bulletin
a NFC card to start the vehicle when a key fob or a digital key device is not present.
This preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
This preliminary information communicates an issue with programming error while try to complete N252521591 and provide...
Read full bulletin
info on how to complete the programming.
This preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
New Vehicle Monitoring Programs Section in IVH
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary information communicates an issue when performing a night vision camera learn the image can not be turned on.
Read full bulletin
This provides a work around while the issue is being worked.
This Preliminary information communicates an issue with super cruise unavailable due to the driver's monitoring camera...
Read full bulletin
and dealers to replace the camera.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
This Preliminary information communicates a diagnostic tip on how to resolve a issue if the serial data authentication...
Read full bulletin
configuration did not complete correctly.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary information communicates a possible retainer ring dis-lodged fora DTC P2714, may not have reverse as...
Read full bulletin
well.
Electrical
39 bulletinsIf a vehicle has an issue with super cruise inoperative tech is directed to follow a diagnostic path before replacing...
Read full bulletin
the Image processing module.
This PI provides a diagnostic tip when fuse F4DR is opening and dealerships are to inspect the wiring at the center...
Read full bulletin
console lid.
Surround Vision Recorder, a new feature that allows you to record, watch, and save video from your vehicle's cameras.
Read full bulletin
Security Recording, a new feature that can automatically begin recording if your vehicle's alarm is triggered while it is parked. Cabin Glance, a new feature that displays a live feed of the seating area on your infotainment screen. This allows you to check on passengers, such as kids or pets. Fixes to help ensure responsiveness for the driver display and rear view camera. Improvements to reliability for alerts and chimes. Better responsiveness for the driver display and rear-view camera.
This Preliminary information communicates an issue with a service door latch system messages.
Read full bulletin
On Cadillac and Chevrolet models dealership are to cycle the child door latch on and off to correct the issue. On GMC models reprogram the BCM and VCU then cyc
This Preliminary information communicates an issue with a service door latch system messages.
Read full bulletin
On Cadillac and Chevrolet models dealership are to cycle the child door latch on and off to correct the issue. On GMC models reprogram the BCM and VCU then cyc
If a vehicle has an issue with super cruise inoperative tech is directed to follow a diagnostic path before replacing...
Read full bulletin
the Image processing module.
This Preliminary information communicates to dealership technicians that if they encounter a customer vehicle with this...
Read full bulletin
concern, to perform the steps listed and should be able to reprogram the module and correct this.
This Preliminary Information is to inform customers to follow diagnostics if resetting, disconnecting the module did not...
Read full bulletin
correct it.
This Preliminary Information is to inform customers to follow diagnostics if resetting, disconnecting the module did not...
Read full bulletin
correct it.
This Preliminary information communicates an issue with a replace or low FOB battery message
This Preliminary information communicates an issue with a service door latch system messages.
Read full bulletin
On Cadillac and Chevrolet models dealership are to cycle the child door latch on and off to correct the issue. On GMC models reprogram the BCM and VCU then cyc
This Preliminary information communicates an issue with a service door latch system messages.
Read full bulletin
On Cadillac and Chevrolet models dealership are to cycle the child door latch on and off to correct the issue. On GMC models reprogram the BCM and VCU then cyc
This preliminary information is for technicians that will have this message after USB updating the radio.
Read full bulletin
The repair should not involve replacing a module as pressing the reset button will correct this issue.
This Preliminary Information is to inform customers to follow diagnostics if resetting, disconnecting the module did not...
Read full bulletin
correct it.
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC'ss
This PI identifies an issue where a loose Body Control module ground on the A pillar could cause various electrical...
Read full bulletin
issues related to the hood latch or a door latch
This P/I is advising that the TCM should not be replaced for DTC P16F4 and to follow the repair instructions.
This PI provides diagnostics tips to dealership techs when trying to diagnose a CAN Bus communication issue after an...
Read full bulletin
event like a lightning strike, battery jump started backwards, failure over the air update, etc.
This P/I is advising that the TCM should not be replaced for DTC P16F4 and to request FSE assistance for a TCM data...
Read full bulletin
pull.
This Preliminary information communicates a issue where the park assist module can set current communication dtc's due...
Read full bulletin
to a timing issue and it may have nothing related to the customers complaint. A software update will be available to repair these flase DTC's
This preliminary information communicates an issue with the DRL LED strips flickering and dealer are to replace the...
Read full bulletin
lighting control module.
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC's
This Preliminary information communicates an issue with high resistance in the glass breakage loop that could cause a...
Read full bulletin
dead battery or unwanted theft alarm. Dealers are to inspect the glass breakage loop.
This preliminary information communicates an issue with the DRL LED strips flickering and dealer are to replace the...
Read full bulletin
lighting control module.
This preliminary information communicates an issue with the DRL LED strips flickering and dealer are to replace the...
Read full bulletin
lighting control module.
This preliminary information communicates an issue with the DRL LED strips flickering and dealer are to replace the...
Read full bulletin
lighting control module.
This preliminary information communicates an issue with the DRL LED strips flickering and dealer are to replace the...
Read full bulletin
lighting control module.
This Preliminary information communicates an issue with high resistance in the glass breakage loop that could cause a...
Read full bulletin
dead battery or unwanted theft alarm. Dealers are to inspect the glass breakage loop.
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC's
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC's
The Driver Information Center may display a message of Transport Mode On after the ignition is cycled.
This information provides software update information for the K73 Telematics module to correct the symptoms described.
This Preliminary information communicates not to replace the Image processing Module if the following DTC's are history...
Read full bulletin
- U3000 SYM49, U1624, U0140, U023B SYM00, U053C, B1DD SYM57.
If a vehicle has an issue with super cruise inoperative tech is directed to follow a diagnostic path before replacing...
Read full bulletin
the Image processing module.
This Preliminary information communicates not to replace the Image processing Module if the following DTC's are history...
Read full bulletin
- U3000 SYM49, U1624, U0140, U023B SYM00, U053C, B1DD SYM57.
This Preliminary information communicates possible causes for battery draw concern
This Preliminary information communicates the active safety features and/or cameras are inoperative or unavailable after...
Read full bulletin
a 12 volt battery replacement or battery charge after a low voltage condition.
This Preliminary Information communication provides information to the technician about vehicles that have an...
Read full bulletin
intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, B3935, C0750, C0755, C0760, C0765, and/or C0775.
This service bulletin provides information on the proper Reflective High Temperature Heat and/or Insulating Tape to use...
Read full bulletin
for certain repairs, such as Wiring Harness Repairs.
Infotainment
26 bulletinsThis Preliminary information communicates to dealers a procedure to reset the radio.
The Rear Camera Mirror display may appear angled downward.
Read full bulletin
Investigation found that an aftermarket or dealer-installed rear license plate frame can contact the license plate lamp applique, pushing the applique upward and skewing the camera display angle. Remove or reposition the interfering frame, verify proper applique seating, and confirm the Rear Camera Mirror display is correctly aligned.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and...
Read full bulletin
how to reset/clear the message.
Fixes to help prevent blank center display and camera image loss Expanded availability for Super Cruise
Improvements to help prevent loss of audio, including chimes and turn signal indicator sound Reduced brightness of...
Read full bulletin
front passenger display at night
Improvements to help prevent loss of audio, including chimes and turn signal indicator sound The rear passenger...
Read full bulletin
display will prompt you to add headphones when that is the selected audio option
This Preliminary information communicates to dealers a procedure to reset the radio.
This Preliminary information communicates to dealers a procedure to reset the radio.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates to dealers a procedure to reset the radio.
This Preliminary information communicates to dealers a procedure to reset the radio.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates to the technician the diagnostic direction needed when the customer complains...
Read full bulletin
of SuperCruise Subscription Required Message Displayed on Instrument Cluster.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This preliminary information communicates an issue with the key fob buttons inoperative and how to resync the fobs back...
Read full bulletin
to the vehicle.
This preliminary information communicates an issue with the key fob buttons inoperative and how to resync the fobs back...
Read full bulletin
to the vehicle.
This preliminary information communicates an issue with the key fob buttons inoperative and how to resync the fobs back...
Read full bulletin
to the vehicle.
This preliminary information communicates an issue with the key fob buttons inoperative and how to resync the fobs back...
Read full bulletin
to the vehicle.
This Preliminary information communicates to dealers a procedure to reset the radio.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This preliminary information communicates an issue with the key fob buttons inoperative and how to resync the fobs back...
Read full bulletin
to the vehicle.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and...
Read full bulletin
how to reset/clear the message.
Brakes
20 bulletinsThis PI provides diagnostic tips for diagnosing electric trailer brakes issues.
This preliminary information communicates an issue with a Service Brake system message and DTC C055F due to a low battery condition.
Read full bulletin
Dealer are to inspect the battery, battery connections and for any aftermarket devices.
This preliminary information communicates an issue with a Service Brake system message and DTC C055F due to a low battery condition.
Read full bulletin
Dealer are to inspect the battery, battery connections and for any aftermarket devices.
Fixes to reduce activations of Automatic Emergency Braking Disabled light.
Read full bulletin
Improvements to availability for Lane Keep Assist. Fixes to help ensure proper functionality for Brake Assist. Fixes for active cabin ventilation. Improvements to the performance of vehicle software updates. Fixes to help ensure successful vehicle software updates.
This preliminary information communicates an issue with a Service Brake system message and DTC C055F due to a low battery condition.
Read full bulletin
Dealer are to inspect the battery, battery connections and for any aftermarket devices.
Certain vehicles listed above may have a condition in which hard braking may unexpectedly engage.
Read full bulletin
Dealers will re-program the IPM or Front View Camera depending on what the vehicle is equipped with.
Certain vehicles listed above may have a condition in which hard braking may unexpectedly engage.
Read full bulletin
Dealers will re-program the IPM or Front View Camera depending on what the vehicle is equipped with.
Certain vehicles listed above may have a condition in which hard braking may unexpectedly engage.
Read full bulletin
Dealers will reprogram the Image Processing Module.
This preliminary information communicates an issue with a Service Brake system message and DTC C055F due to a low battery condition.
Read full bulletin
Dealer are to inspect the battery, battery connections and for any aftermarket devices.
This Preliminary Information communication provides information to the technician about customers that may request the...
Read full bulletin
factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
This PI communicates an issue where the Brake System Control ModuleDTC: U0028-88 and U0037-88 diagnostics are backwards...
Read full bulletin
and follow the diagnostic procedure for U0037 if U0028 is set and vice versa.
Fixes to help ensure proper functionality for Brake Assist.
Read full bulletin
Fixes to help ensure successful vehicle software updates. During the update process, your radio may stay on up to 5 minutes after you exit the vehicle. This is expected behavior when an update package is onboard the vehicle. Do not service your vehicle during installation.
This PI communicates an issue where the Brake System Control ModuleDTC: U0028-88 and U0037-88 diagnostics are backwards...
Read full bulletin
and follow the diagnostic procedure for U0037 if U0028 is set and vice versa.
Certain vehicles listed above may have a condition in which hard braking may unexpectedly engage.
Read full bulletin
Dealers will reprogram the Image Processing Module.
Certain vehicles listed above may have a condition in which hard braking may unexpectedly engage.
Read full bulletin
Dealers will reprogram the Image Processing Module.
This preliminary information communicates an issue with the brake system control module calibrations not being available...
Read full bulletin
when the GM dealership installed brake kit RPO 5JL and explains the calibrations are only for the brake pad life monitoring system.
This preliminary information communicates an issue with the brake system control module calibrations not being available...
Read full bulletin
when the GM dealership installed brake kit RPO 5JL and explains the calibrations are only for the brake pad life monitoring system.
This informational bulletin provides information on Automated Brake Bleed and/or Brake Hydraulic Test procedure fails...
Read full bulletin
when attempting to perform either procedure.
This service bulletin provides information for the technicians to use a Customer Concern Verification sheet to...
Read full bulletin
facilitate the questions needing to be answered by the customer regarding Automatic Emergency Braking (AEB) issues.
This Preliminary information communicates an issue with the Hydrastar Electric Over Hydraulic trailer brake system...
Read full bulletin
causing a voltage spike into the trucks electrical system which is causing DTC C1114 to set.
Body & Paint
13 bulletinsThis PI Communicates information to ensure Memory Recall is enabled to ensure memory mirrors return to set position...
Read full bulletin
after curbview assist is used.
This Preliminary Bulletin was created to assist the technician to a issue where the Drivers door is out of alignment...
Read full bulletin
with the door latch and how to correct the concern
This PI communicates information on isolating a wind noise from the driver front door.
This PI communicates information on isolating a wind noise from the driver front door.
This PI communicates information on isolating a wind noise from the driver front door.
This PI communicates information on isolating a wind noise from the driver front door.
PI to explain normal operation for a concern that the outside rearview mirrors may not fold when the doors are locked,...
Read full bulletin
due to the personalization settings for Auto Door Unlocking.
This PI Communications information on an alternative product dealers can use to perform 19-NA-255: Wax Coating on Frame...
Read full bulletin
Peeling, Metal Shows Corrosion/Rusting due to issue with getting product from current supplier listed in the bulletin.
This Preliminary information communicates an issue with a service keyless entry message caused by aftermarket door...
Read full bulletin
handle covers and they should be removed.
This PI Communicates information to ensure Memory Recall is enabled to ensure memory mirrors return to set position...
Read full bulletin
after curbview assist is used.
This PI Communicates information to ensure Memory Recall is enabled to ensure memory mirrors return to set position...
Read full bulletin
after curbview assist is used.
PI to explain normal operation for a concern that the outside rearview mirrors may not fold when the doors are locked,...
Read full bulletin
due to the personalization settings for Auto Door Unlocking.
This Preliminary information communicates a diagnostic tip on how to resolve a issue of the horn sounding when vehicle...
Read full bulletin
doors are being closed and the key in vehicle reminder set to off.
Software & Calibration
12 bulletinsThis preliminary PI was created to advise techniians in the field that they will not be able to perform a GDS automated...
Read full bulletin
bleed with the scan tool dues to a issue with the software in the scan tool
This preliminary information is to inform technicians and customers that GM is aware of the issue and the vehicle can still be driven.
Read full bulletin
When a repair is available, this PI will be updated.
This Preliminary information communications information on a Short Range Radar software anomaly causing false / ghost...
Read full bulletin
left or right side object detection alerts.
This Preliminary information communications information on a Short Range Radar software anomaly causing false / ghost...
Read full bulletin
left or right side object detection alerts.
This Preliminary information communications information on a Short Range Radar software anomaly causing false / ghost...
Read full bulletin
left or right side object detection alerts.
This preliminary PI was created to advise techniians in the field that they will not be able to perform a GDS automated...
Read full bulletin
bleed with the scan tool dues to a issue with the software in the scan tool
This message is to inform dealers that Service Update bulletin N252521591, is being temporarily suspended for the models...
Read full bulletin
above equipped with RPO UKL or UK0. Involved vehicles will be temporarily removed from IVH. Dealers will be notified when repairs can be resumed. We apologize for any inconvenience this situation may cause.
This preliminary PI was created to advise technians in the field that they will not be able to perform a GDS automated...
Read full bulletin
bleed with the scan tool dues to a issue with the software in the scan tool
This preliminary PI was created to advise techniians in the field that they will not be able to perform a GDS automated...
Read full bulletin
bleed with the scan tool dues to a issue with the software in the scan toolThis preliminary PI was created to advise techniians in the field that they will not be able to perform a GDS automated bleed with the scan tool dues to a issue with the software in the scan tool
This preliminary PI was created to advise techniians in the field that they will not be able to perform a GDS automated...
Read full bulletin
bleed with the scan tool dues to a issue with the software in the scan tool
This Preliminary Information is to inform technicians to not replace any parts at this time and to use the work around provided.
Read full bulletin
When a fix is available, this PI will be updated to a bulletin.
This Preliminary Information is to inform technicians to not replace any parts at this time and to use the work around provided.
Read full bulletin
When a fix is available, this PI will be updated to a bulletin.
Pre-Delivery & Maintenance
9 bulletinsThis PI advise dealers If U3000 is present, follow the correct service doc by Symptom Byte before contacting PQC; if not...
Read full bulletin
present, verify the camera is clean, then contact PQC if no issue is found.
A vehicle may have a service driver assist message and the technician cannot get the Long Range Radar learn procedure to complete.
Read full bulletin
Tech is directed to drive a city route to complete the procedure.
A vehicle may have a service driver assist message and the technician cannot get the Long Range Radar learn procedure to complete.
Read full bulletin
Tech is directed to drive a city route to complete the procedure.
A vehicle may have a service driver assist message and the technician cannot get the Long Range Radar learn procedure to complete.
Read full bulletin
Tech is directed to drive a city route to complete the procedure.
This service bulletin provides information to dealership personnel for new vehicles with less than 1,000 miles that may...
Read full bulletin
not pass California smog inspection or smog inspection in other states.
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector...
Read full bulletin
Reconnect Labor Code Numbers.
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance...
Read full bulletin
programs.
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector...
Read full bulletin
Reconnect Labor Code Numbers.
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for...
Read full bulletin
causing multiple customer concerns that do not have other diagnostic methods to identify them.
HVAC & Climate
8 bulletinsThis is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
PI to help diagnose A/C concern
This is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
This preliminary information communicates an issue with an SES MIL DTC P2B87 and/or P2B86 cause by the Aux heater...
Read full bulletin
coolant pump have an unwanted oring stuck in the pump. Dealers are to remove oring and reinstall pump.
This is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
This is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
This is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
This is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
Fuel System
4 bulletinsThis PI advised dealer technicians of possible causes of diesel fuel contamination in gasoline powered vehicles and...
Read full bulletin
advises of warranty direction.
This Preliminary information communicates the Heavy Fuel Usage message in the DIC is normal due to low fuel range and...
Read full bulletin
current driving habits, or low fuel range and vehicle is idling.
This warranty administration bulletin provides policy information on vehicles outside of a California Emissions State...
Read full bulletin
who move to and register their vehicle in a California Emission State may be entitled to the 7 year, 70,000-mile Emission Select State Component Limited Warranty.
This informational bulletin instructs the tech when fuel/fluid is needed to be tested and where it can be sent for...
Read full bulletin
analysis.
Lighting
3 bulletinsThis Preliminary information communicates to have the dealer verify the vehicle has RPO TRG - Trailer Camera Provisions...
Read full bulletin
to ensure the vehicle is equipped with Turn Signal Activated Camera View.
This Preliminary information communicates to have the dealer verify the vehicle has RPO TRG - Trailer Camera Provisions...
Read full bulletin
to ensure the vehicle is equipped with Turn Signal Activated Camera View.
This Preliminary information communicates information on vehicle speed being limited due to aftermarket lower kit being...
Read full bulletin
installed on the vehicle.
Tires & Wheels
2 bulletinsThis preliminary information communicates information about how to determine if a wheel and tires size change is...
Read full bulletin
available.
This service bulletin provides information on Tire Sidewall Irregularities.
Transmission
2 bulletinsFixes to help ensure proper functionality for heating and cooling features.
Read full bulletin
Improvements to night mode lights for shifting gears. Fixes for Daytime Running Lamps turning on when set to Off. Fixes to help prevent erroneous missing key messages on driver display. Fixes for accuracy of low tire pressure alert. Fixes for speed threshold for pedestrian alerts.
This Preliminary information communicates an issue with an aftermarket device wired into the vehicle and cause the...
Read full bulletin
vehicle to turn off when shifted into gear. This PI provides a diagnostic tip to inform dealership to inspect for this aftermarket device.
Suspension
1 bulletinThis preliminary information communicates diagnostic tips for air leveling suspension system.
Air Bags & Safety
1 bulletinThis Preliminary information communicates assistance in locating the Rear seat belt comfort guides in the parts catalog.