2019 Genesis G70 TSBs

caused by damage or deterioration of the blower motor multi-fuse and fuse box. At Genesis, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Genesis is extending the warranty coverage for the front wiring assembly under this condition to 10 years/ 120,000 miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners.

years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners. Some vehicles may have an inoperative blower motor (not blowing). This may be caused by damage or deterioration of the blower motor multi-fuse and fuse box. Technical Service Bulletin (TSB) 26-BE-005G provides the service procedure to inspect multi-fuse and fuse box for damage or deterioration and, if necessary, replace the blower motor front wiring.

This may be caused by damage or deterioration of the blower motor multi-fuse and fuse box. The warranty coverage for repairs and replacement of the front wiring on 2019-2022MY G70 (IK) vehicles has been extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners.

years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners. Some vehicles may have an inoperative blower motor (not blowing). This may be caused by damage or deterioration of the blower motor multi-fuse and fuse box. Follow the procedures in this bulletin to inspect for damage or deterioration and, if necessary, replace the blower motor front wiring. Any vehicles under 10 years/120,000 miles are covered by this TSB, even if the vehicle is within the original warranty of 5 years/60,000 miles.

combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners. Some vehicles may have an inoperative blower motor (not blowing). This may be caused by damage or deterioration of the blower motor multi-fuse and fuse box. Follow the procedures in this bulletin to inspect for damage or deterioration and, if necessary, replace the blower motor front wiring.

extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners. Some vehicles may have an inoperative blower motor (not blowing). This may be caused by damage or deterioration of the blower motor multi-fuse and fuse box. Follow the procedures in TSB 25-BE-004G to inspect for damage or deterioration and, if necessary, replace the blower motor front wiring.

(HPFP) assemblies that could allow excess fuel to enter the fuel pump. This condition may result in a reduction or loss of motive power at low speeds. The vehicle will also have Diagnostic Trouble Code (DTC) P0088. The warranty coverage for the High-Pressure Fuel Pump (HPFP) has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners.

valves (FCV) that could allow excess fuel to enter the fuel pump due to gradual wear of the FCV plunger. An air/fuel mixture that runs too rich may result in a reduction or loss of motive power at low speeds. The vehicle will also have Diagnostic Trouble Code (DTC) P0088. Genesis is extending warranty coverage for the HPFP under this condition to 15 years or 150,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.

valves (FCV) that could allow excess fuel to enter the fuel pump due to gradual wear of the FCV plunger. An air/fuel mixture that runs too rich may result in a reduction or loss of motive power at low speeds. The vehicle will also have Diagnostic Trouble Code (DTC) P0088. Genesis is extending warranty coverage for the HPFP under this condition to 15 years or 150,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.

This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.

replace the related solenoid and E-module or park position switch.

extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners. Some vehicles may have an inoperative blower motor (not blowing). This may be caused by damage or deterioration of the blower motor multi-fuse and fuse box. Follow the procedures in this bulletin to inspect for damage or deterioration and, if necessary, replace the blower motor front wiring.

extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners. Some vehicles may have an inoperative blower motor (not blowing). This may be caused by damage or deterioration of the blower motor multi-fuse and fuse box. Follow the procedures in TSB 23-BE-011G to inspect for damage or deterioration and, if necessary, replace the blower motor front wiring.

follow the Service Procedure and, if necessary, replace the E-module.

information related to an ECU software update for improvement of: - ISG operation in relation to the battery SOH (State Of Health) condition (deleted as a criteria). - ISG engagement with satisfied battery SOC (State Of Charge).

replace the related solenoid and E-module or park position switch.

This condition is caused by low voltage at the starter S-terminal causing the magnetic switch to become inoperable. This bulletin outlines the procedure to remedy the condition by installing a gasket to the starter mounting area.

Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.

combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.

Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.

This bulletin outlines the procedures to repair the noise.

Some stains may occur from hard water or cleaning chemicals used during a car wash. Follow the procedures below to replace the affected dark chrome moldings.

Some stains may occur from hard water or cleaning chemicals used during a car wash. Follow the procedures below to replace the affected dark chrome moldings.

The noise is caused by contact between the non-woven fabric surface of the head lining and the roof panel.

It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.

and operating difficulties with the home garage system. This bulletin provides information related to some of the possible symptoms.

This bulletin describes the procedure to apply protectant to the cream beige color carpet and floor mats before vehicle retail sale to customer. It is recommended to apply protectant to aide in prevention of soils and stains.

It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.

while driving on uneven road conditions. This bulletin outlines the procedures to repair this condition.

clutch slipping more than 200 rpm in gear).

This procedure is necessary to reduce the TCU learning time and improve the shift quality. Before replacing an automatic transmission: Input the data into the TCU using the GDS. Before replacing a TCU: Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.

This procedure is necessary to reduce the TCU learning time and improve the shift quality. Before replacing an automatic transmission (Pages 2~3): Input the data from the new transmission into the TCU using the GDS. Before replacing a TCU (Pages 4~6): Back up the oil pressure data from the old TCU into the GDS and then transfer the data to the new TCM.

slipping more than 200 rpm in gear).

OEM (new) and remanufactured automatic transmissions:

display warning messages on the instrument cluster, resulting in the PDW sensor(s) failing to detect nearby objects or triggering multiple false alarms. This condition may be a result of external damage to the PDW sensor membrane or sensor cover from rock chips or road debris, a collision, or previous vehicle repairs or modifications.

This bulletin provides the procedure to perform an inspection on the starter magnetic switch for potential freezing and, if necessary, replace the starter magnetic switch (solenoid) assembly.

This battery diagnosis function displays the various battery-related faults such as: Internal short circuit Battery deterioration Malfunction of electronic parts Insufficient battery charge Normal battery Charging defect Battery diagnosis uses the battery sensor history saved for the last 30 days and ICU diagnostic communication to track battery state of charge (SOC) and current parasitic draw history.

by running the GDS Battery Claim App. The App must be run right after an incident battery is removed from the vehicle or after a battery charge is completed which qualifies for a warranty. It must be run at any time between RO open and close dates.

from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.

This bulletin provides a guide to inspect and replace the horns.

certain 2019-2021MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board).

recommended safe chemical products.

chemical products.

Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.

This may be due to an irregular disconnection on Verizons communication network. Follow the procedure in this TSB to reestablish the connection by resetting the AVN unit.

This may be due to an irregular disconnection on Verizon's communication network.

This may be due to an irregular disconnection on Verizons communication network. Follow the procedure in this TSB to reestablish the connection by resetting the AVN unit.

For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.

maximize tire life and performance.

diagnosing and conducting alignment-related repairs for all models and model years.

combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly.

combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly.

drivers-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.

counterfeit driverside airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or noncertified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.

This procedure is applicable when noise (whirring, roaring, grinding, rumbling, etc.) is present which gets louder when driving with more speed.

When asked to provide Modem Information (IMEI/USIM), the Head Unit (HU) displays all zeros. This bulletin describes the procedure to update the Head Unit Software to correct this condition.

The procedure described should be performed just prior to retail sale.