2020 Freightliner 122SD TSBs

Passive Lube Management

Performance Passive Lube Management.

Field Service Campaign D23M3 - GHG17 DETROITTM DD16 Vibration Damper Replacement has been extended for an additional 6 months.

Passive Lube Management

In the spirit of continuous improvement, DTNA reviewed sublet-related policies and procedures. The goal was to improve language clarity and optimize processes. Revisions are in blue font.

Some GHG17 DD Platform Heavy Duty oil pans may experience an issue with the oil pan drain plug insert spinning during removal or installation while completing an oil change. Leaking may also be observed at the drain plug and/or other plugs in the oil pan.

A newly designed, dual-arm friction shoe damping tensioner was implemented for the DD Heavy Duty Platform. The revision includes additional information on retrofit and service kits.

This letter is to announce a reimbursement available to dealers for travel to a customers location to perform a recall or field service campaign.

In the spirit of continuous improvement, DTNA reviewed sublet-related policies and procedures. The goal was to improve language clarity and optimize processes.

Warranty Department will be revising the Warranty Manual.

The following guidelines are for cleaning and disinfecting commonly touched surfaces on the inside and outside of a vehicle. For best results, follow cleaning and disinfecting procedures fully and consistently. Ensure there is adequate ventilation when using chemicals. NOTICE: Wipe down fragile components carefully to avoid damaging the vehicle.

A newly designed, dual-arm friction shoe damping tensioner was implemented for the DD Heavy Duty Platform.

A newly designed, dual-arm friction shoe damping tensioner was implemented for the DD Heavy Duty Platform.

DTNA is pleased to announce the release of new Warranty-related training videos. The videos provide Warranty content in short instructional videos that are available on demand through the AftermarkeTV Video Channel icon on the Aftermarket Resource Center (ARC) home page.

To promote 24-hour throughput and maximum efficiency, DTNA is adjusting multiple handling policies: Launching a new handling allowance for parts ordered from another Authorized Service Location because the facing Part Distribution Center (PDC) is out of stock Retiring Detroit's Customer First Program

managers.

This version replaces the version dated 5/1/14 and adds New Cascadia.

DTNA Workshop Manuals, which states that there are very few cases in which welding a heat-treated frame rail is allowed. Therefore, before welding anything on a frame rail, contact the applicable regional service representative for approval.

managers

The One Stop Supplier Extended Program streamlines the claim filing process because with One Stop Supplier Extended, the service network will file claims for some supplier-supported extended coverages in OWL.

Identifies and addresses discrepancies from the sales order.

Warranty (Parts Warranty).

on TechLit.

REVISION: Some vehicles formerly in Group F have been moved to Group G and have been assigned a new part number as specified in Table 1. An SRT for 'Calibration Code Only: Update or Confirm' has been added, as shown in Table 2, to be used when a new DEF header is not required. There have been some other minor changes to the work instructions and SRT times.

This bulletin replaces the version dated 11/11/2019. Figure 3 has been updated with a new hardware part number. A procedure was added to the data download process.

DTNA determined that since adopting the AutoMeter BCT-460DTNA Powernet Assessment Tool (AutoMeter) as the required powernet system tester, not all battery tags have to be retained support Warranty-related claims.

This bulletin replaces the version dated 5/31/2017. Information is added about the BCT-460DTNA PowerNet Assessment Tool. When troubleshooting Powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.

On Detroit DT12 equipped vehicles, it may be necessary to complete an additional step in the programming process when updating the TCM software.

There is an upcoming running change (RC1) for ACM software that will be installed when OEMs or distributors program with DiagnosticLink. The hardware part number for the ACM module will remain the same (A 000 446 97 54). OEMs are instructed to continue ordering the same ACM hardware part number.

Use the guidelines in this bulletin to determine if a damaged electrical harness should be repaired or replaced.

Older modules will not be compatible with newer module.

Clean Truck Check.

Clean Truck Check.

Clean Truck Check.

Detroit's TechComm team created visual aids for the network and released exploded view posters for DD platform engines. In early 2021, Detroit added multiple DT12 posters.

Gen 5 DD15 equipped units have been brought in for service with a complaint of the instrument panel oil pressure gauge not moving during unit operation and/or stuck at 50PSI. The instrument panel oil pressure gauge does not operate the same as with previous engine models. Please be advised, this is normal operation and no further diagnostics are required. Do not down a unit for this complaint.

This heavy duty friction style belt tensioner kit contains the belt tensioner and two M10 bolts to correctly pin the friction style belt tensioner. The M10x80mm bolt is used to pin the engine cooling fan drive arm. The M10x50mm bolt is used to pin the engine accessory drive arm.

Occasionally we see trucks come in with fuel leaking from the high pressure fuel pump weep hole. This is NOT a defect in the pump and further diagnostics need to be performed to find the root cause.

Detroit established the Warranty Service Replacement Engine Program to support an unrepairable catastrophic engine failure due to manufacturing defect. To improve understanding and utilization of the program, DTNA is clarifying eligibility and engine returns.

On certain vehicles with DD13 engines, incorrect bolts were installed in the flex plate. The flex plate bolts will be replaced.

The Detroit Reman Long Block Program has expanded. The expansion reduces complexity in ordering reman engines and promotes stocking reman engines to meet uptime commitments.

Some engine component failures can cause metallic debris to circulate throughout the engine lubrication system. Although the oil filter will capture most of this debris, some debris may enter the clean side of the lubrication system during oil filter bypass. Detroit has created a lubrication system cleaning and flushing procedure to address this problem.

Parts Information.

The updated after treatment system (ATS) diesel exhaust fluid (DEF) pump times will be applied to repair orders opened on or after April 12, 2021.

A design change removed the magnets from the fill necks for some 6-gallon diesel exhaust fluid (DEF) tanks. If the vehicle is equipped with a non-magnetic fill neck 04-32529-000, it can be updated to a magnetic neck 04-32529-001. This bulletin replaces the version dated 04/18/2017. Updated availability of magnetic fill neck option for other diesel exhaust fluid (DEF) tank part numbers.

travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately. This letter supersedes ICI20-022R.

Service Kit.

On Thursday, September 3, 2020, Service Pack (SP) 2 for DiagnosticLink 8.12 Standard and Professional will be made available to download from the Detroit Diesel server.

Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately.

Note: This document supersedes 14 TS-25 and 15 TS-8. Detroit Diesel has determined that some, Diesel Particulate Filters (DPFs) are compatible in pairs and or can be mixed together within EPA10 and GHG14 Systems. For 1-BOX and Two-Box Configuration Aftertreatment Systems (ATS), this is only possible when the filters are used in accordance with Tables 1 and 2 shown below. All other DPFs, NOT mentioned below, are NOT compatible.

available to download from the Detroit Diesel server.

available for download from the Detroit Diesel server.

available for download from the Detroit Diesel server.

Description of Revisions: The bulletin replaces the version dated 05/14/2024. Creation date has been updated.

Update to CXA 6_24_NOx submission.

Description of Revisions: The bulletin replaces the version dated 05/14/2024. Creation date has been updated.

The updated times will be applied to repair orders opened on or after April 5, 2021.

Current subscribers of DiagnosticLink 8.11 or 8.12 may upgrade to DiagnosticLink 8.13 at no cost. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.

All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.

On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations.

Due to colder weather, there may be an increase in the frequency of faults, noted below, on GHG17/21 DD13 trucks built after June 5th 2019. This is due to a calibration issue in the current MCM software (14.1.1.5 or 14.2.1.3). New software is scheduled for release in the first quarter of 2021 that will address these faults.

Due to colder weather, there may be an increase in the frequency of faults, noted below, on GHG17/21 DD13 trucks built after June 5th 2019. This is due to a calibration issue in the current MCM software (14.1.1.5 or 14.2.1.3). New software is scheduled for release in the first quarter of 2021 that will address these faults.

Due to various software changes and fixes, vehicles will require DiagnosticLink 8.12 to perform functional programming. Failure to use this version may cause errors, incomplete programming, and poor vehicle performance. Because of this, all DiagnosticLink 8.09 installed versions will be disabled as of Thursday, July 23, 2020.

Effective for repair orders opened on or after April 27, 2020, if an Authorized Service Location installed a part which later has a warrantable failure, progressive damage and labor may be covered under the Aftermarket Parts Limited Parts Warranty (Parts Warranty).

DTNA is pleased to announce that handling will increase to 33% for Misc. Replacement Part type claims filed under the Over the Counter (OTC) Aftermarket Parts Replacement Program.

To maintain access to the Detroit server, all DiagnosticLink computers must be updated with the current version of DiagnosticLink software. all DiagnosticLink 8.08 installed versions will be disabled as of Tuesday, January 28, 2020.

60-day expiration, starting on the release day of the bulletin. The intent of a SIB is to notify the service network of a major change to one or more service procedures. Do not save SIBs nor reference them for repairs, as they are uncontrolled and never updated.

Revision removed steps instructing removal and installation of wheels. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.

Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.

With the start of production on March 2, 2020, the fasteners used to assemble the non-Airliner rear suspension (bogie) crossmember have changed. The rear suspension bogie crossmember gussets to the C-channel will be assembled with 5/8 - 18 fasteners. This change includes a revision to a higher friction nut that requires an increase in tightening torque. The new higher friction nut can be identified by its green color.

This service bulletin replaces the version dated 05/01/2016. This bulletin is updated to include the parts list. Some vehicles may exhibit a lean (right or left) due to weight difference on the front suspension. While this does not affect the operation of the vehicle, it may be visually unpleasing to many customers. To correct this condition, replace the existing front axle spacer on the low side of the vehicle with a thicker one.

Revisions are in blue. With Mascot now in partnership with Detroit Reman and Alliance Parts, DTNA is pleased to announce that Mascot coverage has been added to OWL. Remanufactured Alliance/Mascot parts include transmission, differential, steering gear, and steering pump used in an on-highway vehicle applications. The Alliance/Mascot aftermarket warranty coverage period has not changed: depending on the part, coverage is for one (1) or two (2) years and current parts, labor, and reimbursement policies apply.

With Mascot now in partnership with Detroit Reman and Alliance Parts, DTNA is pleased to announce that Mascot coverage has been added to OWL. Remanufactured Alliance/Mascot parts include transmission, differential, steering gear, and steering pump used in an on-highway vehicle applications. The Alliance/Mascot aftermarket warranty coverage period has not changed: depending on the part, coverage is for one (1) or two (2) years and current parts, labor, and reimbursement policies apply.

Though the backup light harness is long enough to connect to the backup light switch, it may be short enough that the wire seals in the connector can be stressed. Moisture entering through the seals can cause corrosion, resulting in a bad connection and/or failure of the switch. As a result, backup lights and, if equipped, the backup alarm, may not function when the vehicle is shifted into reverse.

Delfleet One has been added for aftermarket use. This version replaces service bulletin dated May 5, 2017.

distance for paint finish standards.

Additional photos have been added.

Certain vehicles with Detroit front axles and Meritor EX-L front air disc brakes do not have access to the front brake zerk fittings for lubrication.

The Enhanced Stability Control (ESC) function within the ABS module that applies to the vehicles in your possession needs to be updated for the axle spread values. The ESC with the current values functions as it should, but should be updated to ensure proper calibration in the future.