2013 Dodge Journey TSBs

For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

installed in the vehicle.

cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: P0300- Multiple Cylinder Misfire P0302- Cylinder 2 Misfire P0304- Cylinder 4 Misfire P0306- Cylinder 6 Misfire

All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.

To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.

All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.

installed in the vehicle.

All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - Feb 28, 2019 VF. - Only use R8453637A$ or R8599680A$ for March 1, 2019 and later VF as they have the revised park system. - R8453637A$ and R8599680A$ are physically and functionally equivalent. Installing a R8453637A$ or R8599680A$ in a 2014 - Feb 28, 2019 VF will result in a core with the original park system being returned. Mopar can no longer convert 62TE core with the original park system to the March 1, 2019 and later version. Continued mis-usage will exacerbate the existing core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when

All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 3. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 4. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.

All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: P0300- Multiple Cylinder Misfire P0302- Cylinder 2 Misfire P0304- Cylinder 4 Misfire P0306- Cylinder 6 Misfire

All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.

A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code (DTC) has been set: P0520 - Engine Oil Pressure Sensor Circuit

See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system

bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience any of the following: 3.6L engine. MIL Illumination for P0108 - Manifold Absolute Pressure Sensor Circuit High affects only 2012 model year vehicles equipped with a 3.6L engine (sales code ERB). 2.4L & 3.6L engines 2.4L & 3.6L engines 2.4L & 3.6L engines 3.6L engine 3.6L engine 3.6L engine 2.4L & 3.6L engines 2.4L engine 2.4L engine 2.4L engine Improves the consistency of how shifts are controlled during upshifts ?torque management?. 3.6L engineUpdating the software will correct the conditions listed above.

replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.

bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience any of the following: 3.6L engine. MIL Illumination for P0108 - Manifold Absolute Pressure Sensor Circuit High affects 2012 model year vehicles only. 2.4L & 3.6L engines 2.4L & 3.6L engines 2.4L & 3.6L engines 3.6L engine 3.6L engine 3.6L engine 2.4L & 3.6L engines 2.4L engine 2.4L engine 2.4L engine Improves the consistency of how shifts are controlled during upshifts ?torque management?Updating the software will correct the condition listed above.

has released a new engine coolant for the 2013 model year vehicles and beyond, for all engine applications except the ones listed in the note above. This new coolant is an Organic Additive Technology (OAT) (Fig. 1). OAT coolants have a service interval of 10 years or 150,000 miles. For heavy duty truck and extreme duty cycle applications refer to the Service Information or Owner's Manual for proper maintenance schedules.

Control Module (PCM) with new software. The customer may experience less than desired acceleration from idle.Updating the software will correct the condition listed above.

All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. Only use the reman 62TE specified in StarParts for each model year - Only use R8210327A$ for 2014 - 2018 VF. - Only use R8453637A$ for 2019 VF. - Only use R8599680AA for 2020/1VF. Installing a R8453637A$ or R8599680A$ in a 2014-18 VF will result in a 2014-18 MY core being returned. Mopar can no longer convert 2014-18 VF 62TE core to the 2019-21 version. Continued mis-usage will result in a core shortage. Mopar may deny warranty claims where the incorrect version is used in 2014-18 VF. 3. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 5. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.

All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 3. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 4. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.

with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor. 5) When replacing PN's 68310865A$ & 68308741A$, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.

The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.

All Promaster (VF) 3.6L/62TE equipped vehicles: a) If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) must be replaced as they are one-time usage. b) Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA. c) Vehicles built on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. The engine to transmission dowel pins are critical to the longevity of several components. Verify the dowel pins are in the rear face of engine block before installing a replacement transmission. Mopar will add loose dowel pins with remanufactured 62TE. 3. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter. 4. There may be incorrect fluid measurement on the dipstick tool when checking 62TE fluid level after filling the ATF as per service library specification. Please change with new valve body pan P/N:68145886A$ as there may be incorrect valve body pan is used in Transmission.

This will allow service technicians to repair the root cause without over repairing the system. Replace only the part deemed failed by the diagnostics performed. Individual parts include: - Compressor - Valve block - Individual hoses - Temp sensor - Shield - Air line clips NOTE: in most situations when a new compressor is needed, the compressor as a separate part is the correct repair, and the assembly would not be required.

If replacing due to missing Spring Loaded Check Valve, a replacement spring and check valve are now available through MOPAR.

Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM: ? U0140 - Lost Communication With Body Control Module (BCM) (RT Vehicles Only). ? P0456 - Evap System Small Leak. Transmission Enhancements are also included with this software release. These changes include the following: ? Garage shift engagements into D may be harsh at times after shutdowns of 10-30 minute duration. ? 5/6 Upshift timing adjusted to improve top speed performance (markets where speeds in excess of 161 kph (100 mph) are permitted). NOTE: The Transmission Enhancements only apply to vehicles equipped with the 3.6L engine (sales code ERB).

The technician may find the following Diagnostic Trouble Code (DTCs) set in the Powertrain Control Module (PCM) memory: ? U0140 - Lost Communication With Body Control Module. (3.6L engine only). NOTE: Attempting to clear this DTC will be unsuccessful. Some customers may experience any of the following: ? Continuous cycling of fuel pump relay when using remote start (3.6L engines) ? Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that P0108 - Manifold Absolute Pressure Sensor Circuit High has been set active or stored (3.6L engine) NOTE: MIL Illumination for P0108 - Manifold Absolute Pressure Sensor Circuit High affects only 2012 model year vehicles equipped with a 3.6L engine (sales code ERB). ? 1 - 2 upshift clunk or bump (2.4L & 3.6L engines) ? 3 - 4 harsh upshift at closed throttle after a WOT stab in 1st or 2nd gear (2.4L & 3.6L engines) ? 4 - 5 upshift clunk or bump (2.4L & 3.6L engines) ? 5 - 6 upshift clunk or bump (3.6L engine) ? 6 - 5 downshift clunk or bump (3.6L engine) ? 6 - 4 downshift clunk or bump (3.6L engine) ? RPM Fluctuating or Jerking feeling while operating in cruise control. Condition is more noticeable when the vehicle is going up and down grades(2.4L & 3.6L engines) ? 1 - 2 harsh upshift going down a grade (2.4L engine) ? 3 - 2 downshift clunk or bump (2.4L engine) ? 4 - 3 downshift clunk or bump (2.4L engine) ? Improves the consistency of how shifts are controlled during upshifts ?torque management? ? Delayed downshifts (3.6L engine) Updating the software will correct the conditions listed above.

The customer may describe a loud high frequency noise that happens within 20 seconds of engine startup and lasts about 90 seconds intermittently during a cold engine start, approximately 0 degrees C (32 degrees F) and below.

The customer may describe a loud high frequency noise that happens within 20 seconds of engine startup and lasts about 90 seconds intermittently during a cold engine start, approximately 0 degrees C (32 degrees F) and below.

A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code (DTC) has been set: P0520 - Engine Oil Pressure Sensor Circuit

bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience any of the following: 3.6L engine. MIL Illumination for P0108 - Manifold Absolute Pressure Sensor Circuit High affects only 2012 model year vehicles equipped with a 3.6L engine (sales code ERB). 2.4L & 3.6L engines 2.4L & 3.6L engines 2.4L & 3.6L engines 3.6L engine 3.6L engine 3.6L engine 2.4L & 3.6L engines 2.4L engine 2.4L engine 2.4L engine Improves the consistency of how shifts are controlled during upshifts ?torque management?. 3.6L engineUpdating the software will correct the conditions listed above.

replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.

See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system

cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: P0300- Multiple Cylinder Misfire P0302- Cylinder 2 Misfire P0304- Cylinder 4 Misfire P0306- Cylinder 6 Misfire

cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: ? P0300- Multiple Cylinder Misfire ? P0302- Cylinder 2 Misfire ? P0304- Cylinder 4 Misfire ? P0306- Cylinder 6 Misfire

cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Codes have been set: ? P0300- Multiple Cylinder Misfire ? P0302- Cylinder 2 Misfire ? P0304- Cylinder 4 Misfire ? P0306- Cylinder 6 Misfire

A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that the following Diagnostic Trouble Code (DTC) has been set: P0520 - Engine Oil Pressure Sensor Circuit

bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience any of the following: 3.6L engine. MIL Illumination for P0108 - Manifold Absolute Pressure Sensor Circuit High affects only 2012 model year vehicles equipped with a 3.6L engine (sales code ERB). 2.4L & 3.6L engines 2.4L & 3.6L engines 2.4L & 3.6L engines 3.6L engine 3.6L engine 3.6L engine 2.4L & 3.6L engines 2.4L engine 2.4L engine 2.4L engine Improves the consistency of how shifts are controlled during upshifts ?torque management?. 3.6L engine Updating the software will correct the conditions listed above.

replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.

Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in the PCM: **JC Vehicles 3.6L: P0335 - Crankshaft Position Sensor Circuit. P2610 - PCM Internal Engine Off Timer Performance. U0140 - Lost Communication With Body Control Module (BCM). P0456 - Evap System Small Leak.** JC Vehicles 2.4L: P0456 - Evap System Small Leak. JS Vehicles: P0456 - Evap System Small Leak. RT Vehicles: U0140 - Lost Communication With Body Control Module (BCM). P0456 - Evap System Small Leak. The following transmission enhancements are also included in this software update: Garage shift engagements into D may be harsh at times after shutdowns of 10-30 minute duration. 5/6 Upshift timing adjusted to improve top speed performance (markets where speeds in excess of 161 kph (100 mph) are permitted).

Hard contact knocking noise in the engine compartment caused by contact between the Rear Engine Mount Bracket and the fastener on the Power Transfer Unit (PTU). Noise heard primarily while turning left.

bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience any of the following: 3.6L engine. MIL Illumination for P0108 - Manifold Absolute Pressure Sensor Circuit High affects 2012 model year vehicles only. 2.4L & 3.6L engines 2.4L & 3.6L engines 2.4L & 3.6L engines 3.6L engine 3.6L engine 3.6L engine 2.4L & 3.6L engines 2.4L engine 2.4L engine 2.4L engine Improves the consistency of how shifts are controlled during upshifts ?torque management?Updating the software will correct the condition listed above.

has released a new engine coolant for the 2013 model year vehicles and beyond, for all engine applications except the ones listed in the note above. This new coolant is an Organic Additive Technology (OAT) (Fig. 1). OAT coolants have a service interval of 10 years or 150,000 miles. For heavy duty truck and extreme duty cycle applications refer to the Service Information or Owner's Manual for proper maintenance schedules.

Control Module (PCM) with new software. The customer may experience less than desired acceleration from idle. Updating the software will correct the condition listed above.

bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience any of the following: 3.6L engine. MIL Illumination for P0108 - Manifold Absolute Pressure Sensor Circuit High affects only 2012 model year vehicles equipped with a 3.6L engine (sales code ERB). 2.4L & 3.6L engines 2.4L & 3.6L engines 2.4L & 3.6L engines 3.6L engine 3.6L engine 3.6L engine 2.4L & 3.6L engines 2.4L engine 2.4L engine 2.4L engine Improves the consistency of how shifts are controlled during upshifts ?torque management?. 3.6L engineUpdating the software will correct the conditions listed above.

replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.

bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience any of the following: 3.6L engine. MIL Illumination for P0108 - Manifold Absolute Pressure Sensor Circuit High affects 2012 model year vehicles only. 2.4L & 3.6L engines 2.4L & 3.6L engines 2.4L & 3.6L engines 3.6L engine 3.6L engine 3.6L engine 2.4L & 3.6L engines 2.4L engine 2.4L engine 2.4L engine Improves the consistency of how shifts are controlled during upshifts ?torque management?Updating the software will correct the condition listed above.

has released a new engine coolant for the 2013 model year vehicles and beyond, for all engine applications except the ones listed in the note above. This new coolant is an Organic Additive Technology (OAT) (Fig. 1). OAT coolants have a service interval of 10 years or 150,000 miles. For heavy duty truck and extreme duty cycle applications refer to the Service Information or Owner's Manual for proper maintenance schedules.

Control Module (PCM) with new software. The customer may experience less than desired acceleration from idle.Updating the software will correct the condition listed above.

(M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~

POWERTRAIN CONTROL MODULE (PCM) WITH NEW SOFTWARE. SYMPTOM/CONDITION: A SMALL NUMBER OF CUSTOMERS MAY EXPERIENCE A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION. UPON FURTHER INVESTIGATION THE TECHNICIAN MAY FIND ONE OR MORE OF THE FOLLOWING DIAGNOSTIC TROUBLE CODES (DTCS) SET IN THE PCM: JC VEHICLES 3.6L: P0335 - CRANKSHAFT POSITION SENSOR CIRCUIT. P2610 - PCM INTERNAL ENGINE OFF TIMER PERFORMANCE. U0140 - LOST COMMUNICATION WITH BODY CONTROL MODULE (BCM). P0456 - EVAP SYSTEM SMALL LEAK. P0108 - MANIFOLD ABSOLUTE PRESSURE SENSOR CIRCUIT HIGH (2012 MY ONLY). THE FOLLOWING TRANSMISSION ENHANCEMENTS ARE ALSO INCLUDED IN THIS SOFTWARE UPDATE: CONTINUOUS CYCLING OF FUEL PUMP RELAY WHEN USING REMOTE START. 1 - 2 UPSHIFT CLUNK OR BUMP. 3 - 4 HARSH UPSHIFT AT CLOSED THROTTLE AFTER A WOT STAB IN 1ST OR 2ND GEAR. 4 - 5 UPSHIFT CLUNK OR BUMP. 5 - 6 UPSHIFT CLUNK OR BUMP. 5- 4 DOWNSHIFT CLUNK OR BUMP. 6 - 5 DOWNSHIFT CLUNK OR BUMP. RPM FLUCTUATING OR JERKING WHILE OPERATING IN CRUISE CONTROL. CONDITION IS MORE NOTICEABLE WHEN THE VEHICLE IS GOING UP AND DOWN GRADES. IMPROVES THE CONSISTENCY OF HOW SHIFTS ARE CONTROLLED DURING UPSHIFTS TORQUE MANAGEMENT. DELAYED DOWNSHIFTS. JC VEHICLES 2.4L: **U0140 - LOST COMMUNICATION WITH BODY CONTROL MODULE (BCM).** P0456 - EVAP SYSTEM SMALL LEAK. THE FOLLOWING TRANSMISSION ENHANCEMENTS ARE ALSO INCLUDED IN THIS SOFTWARE UPDATE: 1 - 2 UPSHIFT CLUNK OR BUMP. 3 - 4 HARSH UPSHIFT AT CLOSED THROTTLE AFTER A WOT STAB IN 1ST OR 2ND GEAR. 4 - 5 UPSHIFT CLUNK OR BUMP. RPM FLUCTUATING OR JERKING WHILE OPERATING IN CRUISE CONTROL. CONDITION IS MORE NOTICEABLE WHEN THE VEHICLE IS GOING UP AND DOWN GRADES. 1 - 2 HARSH UPSHIFT GOING DOWN A GRADE. 3 - 2 DOWNSHIFT CLUNK OR BUMP. 4 - 3 DOWNSHIFT CLUNK OR BUMP.

(DTC) IS SET REGARDING ENGINE OIL PRESSURE SENSOR CIRCUIT. *PE

this is normal and not a defect.

this is normal and not a defect.

semi and full synthetic oils.

Detected Message

awareness regarding the use of aftermarket parts.

structural repair parts usage.

A customer may experience that the language selections in the cluster are mixed up. When Italian is selected it will change to Spanish and when Dutch is chosen it will change to Italian.

compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold

Detected Message

take photos of the condition and/ or issue with seat cable before disassembly, Please email pictures of cable including part number to FCA Redacted Content; please include dealer contact information for follow up. If no response in 15 minutes, proceed with repair.

awareness regarding the use of aftermarket parts.

structural repair parts usage.

A customer may experience that the language selections in the cluster are mixed up. When Italian is selected it will change to Spanish and when Dutch is chosen it will change to Italian.

(Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~

A customer may experience that the language selections in the cluster are mixed up. When Italian is selected it will change to Spanish and when Dutch is chosen it will change to Italian.

to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.

washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.

Customer may experience a delay to update the ambient air temperature display with the actual ambient air temperature. This condition is more noticeable during short/slow commutes and with a large ambient air temperature increase between drive cycles.

washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.

This bulletin involves selectively replacing the solar sensor. Customers may experience the following condition: When using the Automatic Temperature Control ?SYNC? mode, left and right outlet temperatures do not match regardless of the desired temperature setting is the same. Occupants will experience being cold (winter time), on either passenger or driver side, even though the temperature setting is the same. Headlamps are always staying on, when they are set to Auto mode.

Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.

Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)

This bulletin involves selectively replacing the solar sensor. Customers may experience the following condition: When using the Automatic Temperature Control ?SYNC? mode, left and right outlet temperatures do not match regardless of the desired temperature setting is the same. Occupants will experience being cold (winter time), on either passenger or driver side, even though the temperature setting is the same. Headlamps are always staying on, when they are set to Auto mode.

Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.

replacing the Telematics Gateway Module (TGM) if required. A customer may experience a loss of satellite radio functions. On further inspection the Technician may note that the Sirius ID number is missing.Updating the radio software will prevent this condition from occurring. If the customer has lost all satellite radio functions and the Sirius ID number is missing, the TGM will need to be replaced to repair this condition.All radio and navigation functions are controlled by the TGM.

Customer may experience a delay to update the ambient air temperature display with the actual ambient air temperature. This condition is more noticeable during short/slow commutes and with a large ambient air temperature increase between drive cycles.

equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.

Customers may experience a Malfunction Indicator Lamp (MIL)illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: U0197-00 - Lost Communication With Hands Free Phone Module. Customers may also comment one or more the following: Loss of audio while on a Bluetooth phone call(MYs 2014 - 2019 JC Only). HFM does not boot properly. "Hands-Free Module Loading" is displayed on the head unit. The HFM is inoperative and unresponsive to all user input. The HFM is unresponsive and appears off the bus to wiTECH. Inaccurate foreign language translations. Voice Recognition (VR) is sluggish after changing the language. IPhone 4 starts auto recording itself. Background noise from automated speech recognition. When in Bluetooth Streaming Audio (BTSA) mode, the display will show ?Musicpaused connecting phone? while a song is being played and without an incoming call. Wrong BTSA screen when deleting. When in Text To Speech (TTS), it will be a mix of the TTS and recording. IPod touch, BTSA will not audio stream. Integrated center stack screen will display ?music paused? afterignition was cycled and BTSA was being used before the ignition was turned off. Automatic Sound Recognition (ASR) microphone picking up background noise. When the language is set for Italian and after the ignition is cycled,the phone screens will change to English(Sales Code RSQ Only). No response from the steering wheel VR button. Not being able to enter into the phone screen on the radio. The customer may note when trying to select a non-supported language likeRussian or Portuguese, the Hands Free screen will default to English. The VR will default back to the last language (Italian, French, Spanish,German or Dutch) the customer was using.

Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.

A small number of customers may report no start condition with the Vehicle Security Light flashing and the DTC B1A8A-00 ? MULTI-MODULE VIN HANDSHAKE FAILURE ? active.

Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)

This bulletin involves selectively replacing the solar sensor. Customers may experience the following condition: When using the Automatic Temperature Control ?SYNC? mode, left and right outlet temperatures do not match regardless of the desired temperature setting is the same. Occupants will experience being cold (winter time), on either passenger or driver side, even though the temperature setting is the same. Headlamps are always staying on, when they are set to Auto mode.

A customer may experience, no response or slow response to cruise control switch activations. Issues will be experienced by the customers that activate/press the switches in a very fast manner.

service flash of the Hands Free Module (HFM). The customer may note when trying to select a none supported language like Russian or Portuguese the Hands Free screen will default to English. The Voice Recognition (VR) will default back to the last language (Italian, French, Spanish, German or Dutch) the customer was using. After the software updated has been completed both the Hands Free screen and VR will default back to the last language used. VR Teleprompter enhancement.

Customer may experience a delay to update the ambient air temperature display with the actual ambient air temperature. This condition is more noticeable during short/slow commutes and with a large ambient air temperature increase between drive cycles.

replacing the Telematics Gateway Module (TGM) if required. A customer may experience a loss of satellite radio functions. On further inspection the Technician may note that the Sirius ID number is missing.Updating the radio software will prevent this condition from occurring. If the customer has lost all satellite radio functions and the Sirius ID number is missing, the TGM will need to be replaced to repair this condition.All radio and navigation functions are controlled by the TGM.

replacing the Telematics Gateway Module (TGM) if required. A customer may experience a loss of satellite radio functions. On further inspection the Technician may note that the Sirius ID number is missing.Updating the radio software will prevent this condition from occurring. If the customer has lost all satellite radio functions and the Sirius ID number is missing, the TGM will need to be replaced to repair this condition.All radio and navigation functions are controlled by the TGM.

The customer may experience the following:HFM does not boot properly. "Hands-Free Module Loading" displayedon the head unit.TheHFM is inoperative and unresponsive to all user input.TheHFM is unresponsive and appears off the bus to wiTECH.Inaccurate foreign language translations.VoiceRecognition (VR) is sluggish after changing the language.IPhone4 starts auto recording itself.Backgroundnoise from Automated Speech Recognition. When in Bluetooth Streaming Audio (BTSA) mode, the display will show?Music paused connecting phone? while a song is beingplayed and without an incoming call. Wrong BTSA screen when deleting. Whenin Text To Speech (TTS), it will be a mix of the TTS and recording. IPodtouch, BTSA will not Audio Stream.Integratedcenter stack screen will display ?music paused? afterignition was cycled and BTSA was being used before the ignition wasturned off.AutomaticSound Recognition (ASR) Microphone picking up background noise.WithSales code RSQ, when the language is set for Italian and after theignition is cycled, the phone screens will change to English.No response from the VR button on the steering wheel.Notbeing able to enter into the phone screen on the radio.Technicians may find Diagnostic Trouble Code (DTC) U0197-00 Lost CommunicationWith Hands Free Phone Module, is set. Thecustomer may note when trying to select a non-supported language likeRussian or Portuguese, the Hands Free screen will default to English.The VR will default back to the last language (Italian, French, Spanish,German or Dutch) the customer was using.After the software update has been completed, both the hands free screen and VR will default back to the last language used.Enhancements now include all vehicles, not just internationalvehicles.The following software enhancement isincluded:VR Teleprompter

REPROGRAM POWERTRAIN CONTROL MODULE WITH UPDATED SOFTWARE *CN

CONTROL MODULE (PCM) WITH NEW SOFTWARE REPROGRAMMING AND SELECTIVE ERASING. MODELS 2014 TOWN AND COUNTRY, GRAND CARAVAN, JOURNEY. *PE

INDICATOR LAMP ILLUMINATION WITH EVAP SYSTEM SMALL LEAK. MODEL 2013 200, TOWN & COUNTRY, GRAND CARAVAN, JOURNEY, FREEMONT. *PE

The customer may note the compass display is missing in the Electronic Vehicle Information Center (EVIC). The Monroney Label does show this as an option for the vehicle.

vehicle to display the passive entry Enable/Disable feature on the menu screen. The customer may note when trying to disable the passive entry feature this option is missing in customer settings

A customer may note that the Headlamp delay off option is missing from the customer settings menu.

The customer may indicate that there is no audio and/or radio is muted. This condition may be caused by the amplifier not communicating on the bus.Flashing the amplifier will correct this condition.

A customer may note that the Headlamp delay off option is missing from the customer settings menu.

The customer may indicate that there is no audio and/or radio is muted. This condition may be caused by the amplifier not communicating on the bus.Flashing the amplifier will correct this condition.

A customer may note that the Headlamp delay off option is missing from the customer settings menu.

The customer may indicate that there is no audio and/or radio is muted. This condition may be caused by the amplifier not communicating on the bus.Flashing the amplifier will correct this condition.

The customer may note the compass display is missing in the Electronic Vehicle Information Center (EVIC). The Monroney Label does show this as an option for the vehicle.

vehicle to display the passive entry Enable/Disable feature on the menu screen. The customer may note when trying to disable the passive entry feature this option is missing in customer settings

The customer may note the compass display is missing in the Electronic Vehicle Information Center (EVIC). The Monroney Label does show this as an option for the vehicle.

vehicle to display the passive entry Enable/Disable feature on the menu screen. The customer may note when trying to disable the passive entry feature this option is missing in customer settings

The customer may experience off route conditions due to weak navigation satellite signal.

ABLE TO DIAL PHONE FROM RADIO BUT CAN DIAL PHONE, TRANSLATION FOR ASIAN LANGUAGE ADDED, AFTER DISCONNECTION PHONE, FAILS TO CONNECT PHONE, ETC. MODEL 2013-14 CHARGER, CHRYSLER 300, JOURNEY. *PE

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

industry awareness regarding the recommended usage of Authentic Mopar Glass.

refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

industry awareness regarding the recommended usage of Authentic Mopar Glass.

The customer may describe a water leak at the rear of the sunroof when using a high pressure touchless car wash.

plastic panels and applying corrosion protection.

bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.

A)

Avenger/Chrysler 200 (JS)

bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following: The AHR is deployed on one or both front seats and will not reset.

B)

bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.

A)

Avenger/Chrysler 200 (JS)

bracket striker pin and possibly replacing a front seat AHR that has inadvertently deployed. Customers may comment on the following:The AHR is deployed on one or both front seats and will not reset.

A)

Avenger/Chrysler 200 (JS)

Print I-Sheet for technician use.

Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.

software and navigation if equipped. A customer may experience, one or more of the following conditions: ? Navigation screen locks up or display will be blank (Software has been updated to better address this condition). ? Navigation feature lockout disable (International Only) (Software has been updated to better address this condition). ? Intermittently the radio may reset (2014-2015 vehicles). ? Improve FM radio reception (This only applies to 2013 or 2014 LX vehicles with RE6, RB6 radios located in Dubai). ? Radio display screen shows ?Test Mode?. ? Navigation system may resets intermittently. ? Translation improvements/corrections. ? System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. ? Radio system improvements during remote start operation. ? Unable to adjust radio volume using steering wheel switch intermittently. ? Second screen is blank when using split screen function. ? Some functionality for Japanese and Korean - keyboard, search, sort and jump. ? Unable to add contacts to the favorite list. ? Unable to dial the phone from the radio, while still able to dial from the phone. ? Unable to delete a cell phone number from the favorite list. ? More space available for phone book entries. ? BlackBerry support for playing songs. ? Reduce ticking noise during CD/USB pause and VR is silent between prompts. ? VR unable to transition from Non-navigation to navigation mode. ? iPod screen is displayed with navigation screen. ? Asian language translation added. ? Highlighted preset continues blinking. ? Takes more then one button press to select preset #10. ? Unable to adjust volume from steering wheel switches. ? Clock adjust pop up message displayed in English rather than current language. ? Can not connect to the phone aft

software and navigation if equipped. A customer may experience, one or more of the following conditions: ? Navigation screen locks up or display will be blank(Software has been updated to better address this condition). ? Navigation feature lockout disable (International Only)(Software has been updated to better address this condition). ? Intermittently the radio may reset (2014-2015 vehicles). ? Improve FM radio reception (This only applies to 2013 or 2014 LX vehicles with RE6, RB6 radios located in Dubai). ? Radio display screen shows ?Test Mode?. ? Navigation system may resets intermittently. ? Translation improvements/corrections. ? System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. ? Radio system improvements during remote start operation. ? Unable to adjust radio volume using steering wheel switch intermittently. ? Second screen is blank when using split screen function. ? Some functionality for Japanese and Korean - keyboard, search, sort and jump. ? Unable to add contacts to the favorite list. ? Unable to dial the phone from the radio, while still able to dial from the phone. ? Unable to delete a cell phone number from the favorite list. ? More space available for phone book entries. ? BlackBerry support for playing songs. ? Reduce ticking noise during CD/USB pause and VR is silent between prompts. ? VR unable to transition from Non-navigation to navigation mode. ? iPod screen is displayed with navigation screen. ? Asian language translation added. ? Highlighted preset continues blinking. ? Takes more then one button press to select preset #10. ? Unable to adjust volume from steering wheel switches. ? Clock adjust pop up message displayed in English rather than current language. ? Can not connect to the phone after

A customer may experience, one or more of the following conditions: ? Navigation screen locks up or display will be blank (Software has been updated to better address this condition). ? Incorrect symbols displayed when entering destination using QWERTY keyboard (Software has been updated to better address this condition). ? Navigation feature lockout disable. ? Navigation system resets intermittently. ? Translation improvements/corrections. ? System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. ? Radio system improvements during remote start operation. ? Unable to adjust radio volume using steering wheel switch intermittently. ? Second screen is blank when using split screen function. ? Add China phone book search. ? Some functionality changes for China- keyboard, search, sort and jump. ? Unable to add contacts to the favorite list. ? Unable to dial the phone from the radio, while still able to dial from the phone. ? Unable to delete a cell phone number from the favorite list. ? More space available for phone book entries. ? BlackBerry support for playing songs. ? Reduce ticking noise during CD/USB pause and VR is silent between prompts. ? VR unable to transition from Non-navigation to navigation mode. ? iPod screen is displayed with navigation screen. ? Asian language translation added. ? Highlighted preset continues blinking. ? Takes more then one button press to select preset #10. ? Unable to adjust volume from steering wheel switches. ? Clock adjust pop up message displayed in English rather than current language. ? Can not connect to the phone after it has been disconnect. ? Teleprompter screen shows incomplete text. ? Some functionality for traffic & weather jump button. ? After changing a language and then selecting CDDA

software and navigation if equipped. A customer may experience, one or more of the following conditions: ? Improve AM/FM radio reception. (This only applies to 2013 or 2014 vehicles with RE6, RB6 radios located in Dubai). ? Intermittently the radio may reset. ? Radio display screen shows ?Test Mode?. ? Navigation screen locks up or display will be blank. ? Navigation feature lockout disable (International Only). ? Navigation system resets intermittently. ? Translation improvements/corrections. ? System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. ? Radio system improvements during remote start operation. ? Unable to adjust radio volume using steering wheel switch intermittently. ? Second screen is blank when using split screen function. ? Some functionality for Japanese and Korean - keyboard, search, sort and jump. ? Unable to add contacts to the favorite list. ? Unable to dial the phone from the radio, while still able to dial from the phone. ? Unable to delete a cell phone number from the favorite list. ? More space available for phone book entries. ? BlackBerry support for playing songs. ? Reduce ticking noise during CD/USB pause and VR is silent between prompts. ? VR unable to transition from Non-navigation to navigation mode. ? iPod screen is displayed with navigation screen. ? Asian language translation added. ? Highlighted preset continues blinking. ? Takes more then one button press to select preset #10. ? Unable to adjust volume from steering wheel switches. ? Clock adjust pop up message displayed in English rather than current language. ? Can not connect to the phone after it has been disconnect. ? Teleprompter screen shows incomplete text. ? Some functionality for traffic & weather jump button. ? After ch

A customer may experience, one or more of the following conditions: ? Navigation screen locks up or display will be blank. ? Incorrect symbols displayed when entering destination using QWERTY keyboard. ? Navigation feature lockout disable. ? Navigation system resets intermittently. ? Translation improvements/corrections. ? System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. ? Radio system improvements during remote start operation. ? Unable to adjust radio volume using steering wheel switch intermittently. ? Second screen is blank when using split screen function. ? Add China phone book search. ? Some functionality changes for China- keyboard, search, sort and jump. ? Unable to add contacts to the favorite list. ? Unable to dial the phone from the radio, while still able to dial from the phone. ? Unable to delete a cell phone number from the favorite list. ? More space available for phone book entries. ? BlackBerry support for playing songs. ? Reduce ticking noise during CD/USB pause and VR is silent between prompts. ? VR unable to transition from Non-navigation to navigation mode. ? iPod screen is displayed with navigation screen. ? Asian language translation added. ? Highlighted preset continues blinking. ? Takes more then one button press to select preset #10. ? Unable to adjust volume from steering wheel switches. ? Clock adjust pop up message displayed in English rather than current language. ? Can not connect to the phone after it has been disconnect. ? Teleprompter screen shows incomplete text. ? Some functionality for traffic & weather jump button. ? After changing a language and then selecting CDDA ?of? is displayed as a tracking number. ? In ?Set Date Year? only 3 digits are displayed. ? Split map view will

A customer may experience, one or more of the following conditions: Radio display screen shows ?Test Mode?. Navigation screen locks up or display will be blank. Navigation feature lockout disable (International Only). Navigation system resets intermittently. Translation improvements/corrections. System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. Radio system improvements during remote start operation. Unable to adjust radio volume using steering wheel switch intermittently. Second screen is blank when using split screen function. The symbol of the car on the map will move erratic, Jerks, Jumps or Backwards. The indication of the highlighted path may be missing at times. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. Blackberry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non-navigation to navigation mode. iPod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more than one button press to select preset #10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic & weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. When in Italian, the destination arrives.

A customer may experience, one or more of the following conditions: Radio display screen shows ?Test Mode?. Navigation screen locks up or display will be blank. Navigation feature lockout disable (International Only). Navigation system resets intermittently. Translation improvements/corrections. System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. Radio system improvements during remote start operation. Unable to adjust radio volume using steering wheel switch intermittently. Second screen is blank when using split screen function. Some functionality for Japanese and Korean - keyboard, search, sort and jump. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. BlackBerry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non-navigation to navigation mode. Viod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more then one button press to select preset #10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic & weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. When in Italian, the destination arrival text will overlap onto the

A customer may experience, one or more of the following conditions: Navigation screen locks up or display will be blank. Navigation feature lockout disable. Navigation system resets intermittently. Translation improvements/corrections. System consistency and operational improvements for menu selections, month/date formatting, and Garmin translation functions. Radio system improvements during remote start operation. Unable to adjust radio volume using steering wheel switch intermittently. Second screen is blank when using split screen function. Add China phone book search. Some functionality changes for China- keyboard, search, sort and jump. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. BlackBerry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non-navigation to navigation mode. iPod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more then one button press to select preset #10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic & weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. Some pop up message characters is displayed with ?!#?. Traffic programming slow to start.

A customer may experience, one or more of the following conditions: The symbol of the car on the map will move erratic, Jerks, Jumps or Backwards. The indication of the highlighted path may be missing at times. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. BlackBerry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non-navigation to navigation mode. iPod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more than one button press to select preset #10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic & weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. When in Italian, the destination arrival text will overlap onto the map. Does not accept Iraq when commanding ?Set Target Country?. Some pop up message characters is displayed with ?!#?. Traffic programming slow to start.

A customer may experience, one or more of the following conditions: Add China phone book search. Some functionality for China, Japanese and Korean - keyboard, search, sort and jump. Unable to add contacts to the favorite list. Unable to dial the phone from the radio, while still able to dial from the phone. Unable to delete a cell phone number from the favorite list. More space available for phone book entries. BlackBerry support for playing songs. Reduce ticking noise during CD/USB pause and VR is silent between prompts. VR unable to transition from Non-navigation to navigation mode. iPod screen is displayed with navigation screen. Asian language translation added. Highlighted preset continues blinking. Takes more then one button press to select preset #10. Unable to adjust volume from steering wheel switches. Clock adjust pop up message displayed in English rather than current language. Can not connect to the phone after it has been disconnect. Teleprompter screen shows incomplete text. Some functionality for traffic & weather jump button. After changing a language and then selecting CDDA ?of? is displayed as a tracking number. In ?Set Date Year? only 3 digits are displayed. Split map view will not cancel. Map screen turns black when driving. When in Italian, the destination arrival text will overlap onto the map. Does not accept Iraq when commanding ?Set Target Country?. Some pop up message characters is displayed with ?!#?. Traffic programming slow to start.

Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.

Library for specifications so a suitable alternative can be used

bin and applying flock/felt tape to the seat track cross frame bar at the front of the passenger seat bottom. The customer may experience a squeak coming from under the passenger seat storage bin.

bin and applying flock/felt tape to the seat track cross frame bar at the front of the passenger seat bottom. The customer may experience a squeak coming from under the passenger seat storage bin.

bin and applying flock/felt tape to the seat track cross frame bar at the front of the passenger seat bottom. The customer may experience a squeak coming from under the passenger seat storage bin.

organizer; latches are serviceable separately. You do not need to replace the entire bin or lid for this, the following part numbers are for the cover latches: 1CB78DK7AA 1CB78XDVAA Failure to follow this could result in a dealer chargeback

vibration complaint; please review the 4 wheel assemblies in order to detect any witness mark of a missing/misplaced wheel weight. Also please try to remove the weights with hand force only. Please inform Karla De La Rosa Munive (karla.delarosa@fcagroup.com) how many witness marks were seen, and how many weights were able to be removed with force hand,on each wheel assembly. ~ Please contact karla.delarosa@fcagroup.com for feedback related ONLY.

Steel wheel can develop small leak.

Steel wheel can develop small leak.

vibration complaint; please review the 4 wheel assemblies in order to detect any witness mark of a missing/misplaced wheel weight. Also please try to remove the weights with hand force only. Please inform Karla De La Rosa Munive (karla.delarosa@fcagroup.com) how many witness marks were seen, and how many weights were able to be removed with force hand,on each wheel assembly. ~ Please contact karla.delarosa@fcagroup.com for feedback related ONLY.

VIBRATION COMPLAINT; PLEASE REVIEW THE 4 WHEEL ASSEMBLIES IN ORDER TO DETECT ANY WITNESS MARK OF A MISSING/MISPLACED WHEEL WEIGHT. ALSO PLEASE TRY TO REMOVE THE WEIGHTS WITH HAND FORCE ONLY. PLEASE INFORM KARLA DE LA ROSA MUNIVE (KARLA.DELAROSA@FCAGROUP.COM) HOW MANY WITNESS MARKS WERE SEEN, AND HOW MANY WEIGHTS WERE ABLE TO BE REMOVED WITH FORCE HAND,ON EACH WHEEL ASSEMBLY. ~ PLEASE CONTACT KARLA.DELAROSA@FCAGROUP.COM FOR FEEDBACK RELATED ONLY."

MODELS 2013 JOURNEY. *PE

industry awareness regarding the use of recycled or salvage parts.

industry awareness regarding the use of recycled or salvage parts.

catalytic converter efficiency

to improve the Navigation performances. Customer may experience off route conditions due to degrading Navigation satellite signal available from GPS antenna placed in the I/P.

TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS (Part Number 06511385A$) ARE ONE TIME USEAGE & MUST BE REPLACED & PROPERLY TORQUED TO 105NM Replace the eight bolts (8) 06503465 drive plate to crank shaft and the four TC bolts 06504383 as they have sealants Vehicle miles < 30K: Mandatory replacement of transmission and driveplate Vehicle miles > 30K: Replace driveplate only (shot peened)

TRANSMISSION BRACKET TO THE TRANSMISSION CASE FASTENERS ARE REMOVED DURING SERVICING, THE FASTENERS Part Number 06511385A$ ARE ONE TIME USEAGE & MUST BE REPLACED & PROPERLY TORQUED TO 105NM Replace the eight bolts 8 06503465 drive plate to crank shaft and the four TC bolts 06504383 as they have sealants Vehicle miles < 30K: Mandatory replacement of transmission and driveplate Vehicle miles > 30K: Replace driveplate only shot peened

The customer may experience a noise from the front upper strut mount going over bumps or when turning.

The customer may experience a noise from the front upper strut mount going over bumps or when turning.

The customer may experience a noise from the front upper strut mount going over bumps or when turning.

Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.~ 2) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced (TCM, PCM, ESP/ABS, etc). This fault is not due to the ACC Sensor. No sensor replacement is required.~ 3) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage (if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. **Hints for running Horizontal Alignment procedure: A) Verify speed is between 45 and 75 mph, B) verify the road is relatively straight with signs, poles, guard rails, etc C) Do not tail a vehicle too closely this inhibits the learning procedure

may have a ground wire eyelet on the right front shock tower that allows water to wick through the ground wire case and into the ABS module. Moisture in the ABS module could disable the ABS and/or Electronic Stability Control (ESC) system(s). The lack of a functioning ABS and/or ESC system(s) could change the braking and/or handling characteristics of the vehicle and cause a crash without warning.

B)

Improved calibration for an extended range of driving condition. Electronic Pedestrian Protection System Enhancement to provide better behavior of the system in any type of driving condition.