2010 Dodge Dakota TSBs

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik

To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.

All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.

illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs): MIL Illumination P2096 - Downstream Fuel Trim System 1 Lean (5.7L Engines). P2097 - Downstream Fuel Trim System 1 Rich (5.7L Engines). P2098 - Downstream Fuel Trim System 2 Lean (5.7L Engines). P2099 - Downstream Fuel Trim System 2 Rich (5.7L Engines). Drivability Improvements: **MIL Lamp without DTC Active - Permanent Fault Code Issue (fix permanent fault code retention). ASD Relay (to improve fuel pump relay initialization at key on).** Fuel pump relay operation at key on. Engine seems to lack power at high engine RPMs (5.7L and 4.7L Engines). Shudder or shake condition on wide open throttle stab during downshift event (5.7L and 4.7L Engines). EVAP Diagnostic Enhancements. This diagnostic routine will be disabled while the vehicle is in decel fuel shut off mode.(3.7L/4.7L Engines only). Audible knock sound on WOT launches (DJ/DD 5.7L Engines only). Transmission Improvements: High engine RPMs needed before vehicle will upshift from 3rd to 4th. (5.7L and 4.7L Engines). Harsh 1st to 2nd gear upshift (5.7L and 4.7L Engines). Unexpected or busy downshift while coasting between 72-77 kmh (45-48 mph) (DS 5.7L Engines only).

replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.

The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik

Powertrain Control Module (PCM) with new software. The customer may experience a MIL illumination. Upon further investigation the technician may find that any of the following erroneous Diagnostic Trouble Codes (DTCs): ? U0140 - Lost Communication With Body Control Module. 2010 DJ 5.7L (Sales Code EZC) Attempting to clear this DTC will be unsuccessful. ? P050D - Cold Start Rough Idle. ? P2181 - Cooling System Performance has been set. ? P0935 - Line Pressure Sensor Circuit High. All RFE transmissions. P0300 through P0308 - Multiple and Single Cylinder Misfire. This condition can occur when the vehicle is started cold and the driver immediately places the vehicle in drive and applies heavy throttle. Driveability and Transmission improvements are also included with this software release. These changes consist of the following: ? Enhanced clutch protection for more robust torque management during repeated fore and aft movement (rocking vehicle). All engines. ? A revised torque convertor lockup schedule that will reduce transmission temperatures in Tow/Cruise mode. All models equipped with RFE transmission. ? A Clunk sound or feel a shudder when the cruise control resume switch is pressed. This condition is most noticeable after the brakes were pressed to cancel cruise control and then the resume switch is pressed. All models equipped with RFE transmission. ? A shudder or shaking feeling when a wide open throttle (WOT) event is performed by the customer. This is most noticeable after the transmission downshifts during the WOT event. This condition will stop once the transmission upshifts. All models equipped with RFE transmission. ? A shudder or shaking feeling when accelerating from a stop under moderate throttle. This condition will stop once the transmission upshifts. All models equipped with RFE transmission.

illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs): MIL Illumination P2096 - Downstream Fuel Trim System 1 Lean (5.7L Engines). P2097 - Downstream Fuel Trim System 1 Rich (5.7L Engines). P2098 - Downstream Fuel Trim System 2 Lean (5.7L Engines). P2099 - Downstream Fuel Trim System 2 Rich (5.7L Engines). Drivability Improvements: **MIL Lamp without DTC Active - Permanent Fault Code Issue (fix permanent fault code retention). ASD Relay (to improve fuel pump relay initialization at key on).** Fuel pump relay operation at key on. Engine seems to lack power at high engine RPMs (5.7L and 4.7L Engines). Shudder or shake condition on wide open throttle stab during downshift event (5.7L and 4.7L Engines). EVAP Diagnostic Enhancements. This diagnostic routine will be disabled while the vehicle is in decel fuel shut off mode.(3.7L/4.7L Engines only). Audible knock sound on WOT launches (DJ/DD 5.7L Engines only). Transmission Improvements: High engine RPMs needed before vehicle will upshift from 3rd to 4th. (5.7L and 4.7L Engines). Harsh 1st to 2nd gear upshift (5.7L and 4.7L Engines). Unexpected or busy downshift while coasting between 72-77 kmh (45-48 mph) (DS 5.7L Engines only).

replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.

replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.

replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.

(M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~

Some customers may describe one or more of the following: MIL Illumination Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: P2096 - Downstream Fuel Trim System 1 Lean (5.7L Engines). P2097 - Downstream Fuel Trim System 1 Rich (5.7L Engines). P2098 - Downstream Fuel Trim System 2 Lean (5.7L Engines). P2099 - Downstream Fuel Trim System 2 Rich (5.7L Engines). Drivability Improvements: MIL Lamp without DTC Active - Permanent Fault Code Issue (fix permanent fault code retention). ASD Relay (to improve fuel pump relay initialization at key on). Fuel pump relay operation at key on. Engine seems to lacks power at high engine RPMs (5.7L and 4.7L Engines). Shudder or shake condition on wide open throttle stab during downshift event (5.7L and 4.7L Engines). EVAP Diagnostic Enhancements. This diagnostic routine will be disabled while the vehicle is in decel fuel shut off mode.(3.7L/4.7L Engines only). Audible knock sound on WOT launches (DJ/DD 5.7L Engines only). Transmission Improvements: High engine RPMs needed before vehicle will upshift from 3rd to 4th. (5.7L and 4.7L Engines). Harsh 1st to 2nd gear upshift (5.7L and 4.7L Engines). Unexpected or busy downshift while coasting between 45-48 mph (72-77 kmh) (DS 5.7L Engines only).

ILLUMINATION. UPON FURTHER INVESTIGATION THE TECHNICIAN MAY FIND THE FOLLOWING DIAGNOSTIC TROUBLE CODES (DTCS): MIL ILLUMINATION P2096 - DOWNSTREAM FUEL TRIM SYSTEM 1 LEAN (5.7L ENGINES). P2097 - DOWNSTREAM FUEL TRIM SYSTEM 1 RICH (5.7L ENGINES). P2098 - DOWNSTREAM FUEL TRIM SYSTEM 2 LEAN (5.7L ENGINES). P2099 - DOWNSTREAM FUEL TRIM SYSTEM 2 RICH (5.7L ENGINES). DRIVABILITY IMPROVEMENTS: **MIL LAMP WITHOUT DTC ACTIVE - PERMANENT FAULT CODE ISSUE (FIX PERMANENT FAULT CODE RETENTION). ASD RELAY (TO IMPROVE FUEL PUMP RELAY INITIALIZATION AT KEY ON).** FUEL PUMP RELAY OPERATION AT KEY ON. ENGINE SEEMS TO LACK POWER AT HIGH ENGINE RPMS (5.7L AND 4.7L ENGINES). SHUDDER OR SHAKE CONDITION ON WIDE OPEN THROTTLE STAB DURING DOWNSHIFT EVENT (5.7L AND 4.7L ENGINES). EVAP DIAGNOSTIC ENHANCEMENTS. THIS DIAGNOSTIC ROUTINE WILL BE DISABLED WHILE THE VEHICLE IS IN DECEL FUEL SHUT OFF MODE.(3.7L/4.7L ENGINES ONLY). AUDIBLE KNOCK SOUND ON WOT LAUNCHES (DJ/DD 5.7L ENGINES ONLY). TRANSMISSION IMPROVEMENTS: HIGH ENGINE RPMS NEEDED BEFORE VEHICLE WILL UPSHIFT FROM 3RD TO 4TH. (5.7L AND 4.7L ENGINES). HARSH 1ST TO 2ND GEAR UPSHIFT (5.7L AND 4.7L ENGINES). UNEXPECTED OR BUSY DOWNSHIFT WHILE COASTING BETWEEN 72-77 KMH (45-48 MPH) (DS 5.7L ENGINES ONLY)."

semi and full synthetic oils.

awareness regarding the use of aftermarket parts.

structural repair parts usage.

compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold

awareness regarding the use of aftermarket parts.

structural repair parts usage.

(Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~

to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.

Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.

THE SIDE AIRBAG INFLATABLE CURTAIN (SABIC) ON ABOUT 4200 MY 2008-2010 DODGE DAKOTA VEHICLES MAY NOT DEPLOY IN AN INSURANCE INSTITUTE FOR HIGHWAY SAFETY SIDE IMPACT TEST. THE OCCUPANT RESTRAINT CONTROLLER MODULE WILL BE REPROGRAMMED.

Library for specifications so a suitable alternative can be used

2009 through 2012 model year: (DS) Ram Truck (ND) Dodge Dakota (HB) Dodge Durango (HG) Chrysler Aspen NOTE: All of the above involved vehicles are equipped with a Chrysler 9.25? rear axle (sales code DRB) or C235 rear axle (sales code DRN). The above vehicles may have been built with a rear axle pinion nut that can loosen, which could result in the rear axle locking up. This could cause a loss of vehicle control and/or a crash with little warning. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Dealers will be notified of the launch of this safety recall by way of established methods used in the past.

2009 through 2012 model year: (DS) Ram Truck (ND) Dodge Dakota (HB) Dodge Durango (HG) Chrysler Aspen NOTE: All of the above involved vehicles are equipped with a Chrysler 9.25? rear axle (sales code DRB) or C235 rear axle (sales code DRN). The above vehicles may have been built with a rear axle pinion nut that can loosen, which could result in the rear axle locking up. This could cause a loss of vehicle control and/or a crash with little warning. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Dealers will be notified of the launch of this safety recall by way of established methods used in the past.

2009 through 2012 model year: (DS) Ram Truck (ND) Dodge Dakota (HB) Dodge Durango (HG) Chrysler Aspen NOTE: All of the above involved vehicles are equipped with a Chrysler 9.25? rear axle (sales code DRB) or C235 rear axle (sales code DRN). The above vehicles may have been built with a rear axle pinion nut that can loosen, which could result in the rear axle locking up. This could cause a loss of vehicle control and/or a crash with little warning. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Dealers will be notified of the launch of this safety recall by way of established methods used in the past.

2009 through 2012 model year: (DS) Ram Truck (ND) Dodge Dakota (HB) Dodge Durango (HG) Chrysler Aspen NOTE: All of the above involved vehicles are equipped with a Chrysler 9.25? rear axle (sales code DRB) or C235 rear axle (sales code DRN). The above vehicles may have been built with a rear axle pinion nut that can loosen, which could result in the rear axle locking up. This could cause a loss of vehicle control and/or a crash with little warning. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Dealers will be notified of the launch of this safety recall by way of established methods used in the past.

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~Before 3rd quarter -2017. For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option.

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~Before 3rd quarter -2017. For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option.

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~ For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option."

2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.

2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.

2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.

THIS BULLETIN INVOLVES FLASH REPROGRAMMING THE POWERTRAIN CONTROL MODULE (PCM) WITH NEW SOFTWARE. ALSO INCLUDED MODEL RAM1500 MODEL YEAR 2010 AND MODEL DAKOTA MODEL YEARS 2009-2010. *JS

industry awareness regarding the use of recycled or salvage parts.

industry awareness regarding the use of recycled or salvage parts.

industry awareness regarding the recommended usage of Authentic Mopar Glass.

industry awareness regarding the recommended usage of Authentic Mopar Glass.

Print I-Sheet for technician use.

Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.