2026 Chrysler Voyager TSBs

S2623000040.

S2623000040.

Mirror Contacts Door Window Glass In The Folded Position.

Mirror Contacts Door Window Glass In The Folded Position.

Mirror Contacts Door Window Glass In The Folded Position.

Mirror Contacts Door Window Glass In The Folded Position.

(DTC) present: SYMPTOM: B251D1-00 - Universal Garage Door Opener Control. Customers may comment on the following: Operational questions regarding the usage of the HomeLink UGDO. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.

chatter/streak/jump/skip/smear or make noise while traveling across the windshield. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.

a proper evaluation of the issue. If this does not correct the issue, please follow the steps in SOL: S2508000039

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates

Requesting dealers to order inflator kit install strap from Mopar (PN68563446AA) to install the kit under second row load floor. Do not replace quarter panel as a solution to this issue

chatter/streak/jump/skip/smear or make noise while traveling across the windshield.

The power sliding door will not open with the button. Latch popping noise heard when attempting to open and/or close the power sliding door. NOTE: Doors will open manually **This bulletin involves inspecting and possibly reprogramming the PDSMs with the latest available software.**

screen or a blank center screen when using the submenus. This black screen may occur when preparing the RU for pre-delivery. Please do not replace the radio. The solution is to reset the radio and retry the submenus to assure that the issue is resolved. If the issue resolution is not in place, it is recommended that a hard reset be done for the ETMR1H. The hard reset can be done by disconnection of the radio completely and reconnecting. Another way is to completely disconnect the positive battery terminal such that the radio is completely without power and reconnecting. Once again, please do not remove and replace the radio with the failure mode of a black or blank screen. Current SW U42.13 is the production level SW for the ETMR1H and will be updated in the next few months."

gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.

gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.

Cluster issue if misdiagnosed can lead to unnecessary IPC replacement. Tech Tip: Speed warning selection (circled speed) option may appear without an owner selecting the option. This option was not an option available for US vehicles. This option can be turned off by using the wiTECH scan tool, select the Body Control Module (BCM)>Misc. Functions>Cluster Speed Limit Reset. Refer SOL S2608000020 published

Right power sliding door inoperable. NOTE: Doors will open manually This bulletin involves reprogramming the PDSMs with the latest available software

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

the radio: "Battery of Uconnect Box requires service. SOS call and related functions may be unavailable. Please visit an authorized dealer." PLEASE do not Replace the TBM module, only replace TBM Internal Battery (inside Telematics Box Module) and order PN68493347

Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): B1E21-96 - Backup Battery Component Internal Failure

to vehicles equipped with a Global Telematics Box Module (TBM) (Sales Code RDG) Customers may experience one or more of the following: - Error display of "Uconnect Box Requires Service/Wifi Unavailable" pop ups; [ TBM DTC B22A9-96 Internal Performance Failure ]. - Error display of "Uconnect Box Requires Service" pop ups; [ TBM DTCs B1560, B1561, B1562 - Antenna loose connection ].

DTC 0x980512 (B1805-12) Passenger Door Lock/Unlock Switch-Circuit Short to Ground DMRL/DMRR: DTC 0xA5662A (B2566-2A) Pawl Switch - Signal Stuck DTC 0xA5652A (B2565-2A) - Primary Ajar Switch Stuck DTC 0xA50007 (B2500-07) Power Sliding Door Latch-Mechanical Failures No impact to customer. Known stored or active faults where no functional effects are observed due these DTCs. But Continue with Normal diagnostics if any functional issues observed (or) If there are other active DTCs logged.

Current controls are not robust against depleted auxiliary battery condition. Please follow SOL S2508000031.

Dealers need to order Mopar service kit (PN 68563446AA) to stow the inflator under 2nd row load floor. Requesting dealers to not replace the spare tire cover with canceled part 1/4 trim storage cover (5RM05DX9AH)

Navigation Stability - Android Auto & Carplay s ustomers may experience one or more of the following:- Navigation Stability - Android Auto & Carplay stability & connectivity- Distorted/glitchy display prior to startup animation- Text appearance display- Widget incorrect display- Turn signal blind spot response timing- Audio cut out - Drive Modes selection- Park assist Guidelines selctiontability & connectivity- Distorted/glitchy display prior to startup animation- Text ap

IPC display message speed warning exceeded. Speed limit appears on US IPC. Fig. 1 This bulletin involves inspecting and possibly reprogramming the IPC configuration.

IPC display message speed warning exceeded. Speed limit appears on US IPC. Fig. 1 This bulletin involves inspecting and possibly reprogramming the IPC configuration.

load on the Home/Split screen Fig. 1.

IPC display message speed warning exceeded. Speed limit appears on US IPC. Fig. 1 This bulletin involves reprogramming the IPC configuration.

Will Not Open/ Close. Liftgate/Hatch Ajar Message Displayed. Rev A

Will Not Open/ Close. Liftgate/Hatch Ajar Message Displayed.

Cluster (IPC) when the turn-by-turn feature is enabled. This issue occurs when using Google Maps for Navigation via CarPlay

Cluster (IPC) when the turn-by-turn feature is enabled. This issue occurs when using Google Maps for Navigation via CarPlay

Function.

or B1570-93

TBM Setting Stored Or Pending DTCs B22A9, B1560, B1561, B1562

Navigation screen intermittently freezes. Black bar appears over the media screen as if the radio is in night mode (Rearview Camera (RVC) Functions Normally) This bulletin involves inspecting the software level and updating the software to U40.20.

the following: - Navigation non-functional, not updating current position. - Screen Off hard key inoperative, Soft key on radio screen still operational. - CarPlay and Android Auto stability issues. - Text cut-off in different menus or pop-up messages - Voice Recognition not working for specific voice commands

part, we want to notify them to review Star Online S2208000045 before replacing cameras for poor image quality (fuzzy, blurry, pixelated) to ensure camera replacement is warranted / justified. This SOL provides a process for evaluating if the camera's image quality is within a typical range.

message is displayed on the Instrument Panel Cluster (IPC). Coolant is leaking from the right rear of the vehicle. This bulletin involves inspecting for the presence of a coolant leak at one or both rear heater core coolant hoses, and if found leaking, properly secure one or both of the heater core cooler hoses to the rear heater core

and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: **Oil Level High Warning in the Instrument Panel Cluster (IPC).** Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. Vehicle is not heating up fast enough at freezi

This data collection is applicable to all vehicle with engines with sales codes: ERG, ERC, EH3 and ERF. To assist with monitoring and quality improvement of the 3.6L engine, every time a vehicle comes for any of the first 3 oil changes, please use wiTECH to record the total engine idle time and the total engine runtime. 1. Prior to perform the oil change connect wiTECH diagnostic tool. 2. Navigate to the topology screen on the action item section. 3. Once the topology screen loads, disconnect wiTECH and continue with oil change.

There may also be associated driveability issues. Upon further investigation, the following fault codes may be found in the PCM:

Turn the fog lamp on for one hour and inspect it afterward. Refer to 23-008-25 Rev.A. Exterior Front Lamps Condensation Clearing Procedure for details. 2) If the fog lamp(s) do not light. Refer to Star Online Publication S2523000085 for details.

Turn the fog lamp on for one hour and inspect it afterward. Refer to 23-008-25 Rev.A. Exterior Front Lamps Condensation Clearing Procedure for details. 2) If the fog lamp(s) do not light. Refer to Star Online Publication S2523000085 for details.

Cluster

Turn the fog lamp on for one hour and inspect it afterward. Refer to 23-008-25 Rev.A. Exterior Front Lamps Condensation Clearing Procedure for details. 2) If the fog lamp(s) do not light. Refer to Star Online Publication S2523000085 for details.

Order PN: 68594990AE Reference - Global Bulletin System - Action Bulletin 320767-02 is Published: AB: RU Chrysler Pacifica Action Bulletin - Cancellation of PHEV for 26MY and beyond

lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*

the above vehicles may have been built with a with nonfunctional ceramic lattice (brick). This causes a DTC (Diagnostic Trouble Code) to trigger and an MIL (Malfunction Indicator Light) to set. These catalytic converters are non-functional and incapable of reducing/removing pollutants from the exhaust.

Order a "Z" part number for all Exchange Orders: Warranty, Mopar, Customer pay and Service contract. Order"68" part number for New unsold units only

Multiple Warning Indicators On In The IPC. ESM - PRNDL Flashing. And The Vehicle Will Not Shift Into Gear. The Wipers May Be On, With An Electric Parking Brake Unavailable.

Check the Strut bearings, Strut mounts, or similar suspension components prior to replacing Steering Gears. Previous customers have returned after EPS gear was replaced. Strut bearings are the most frequent cause of RU BSR complaints.

vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): C151D-00 - Tire Pressure Sensor Location Undetermined. C10EA-00 - Left Park Brake Actuator. C10EB-00 - Right Park Brake Actuator. C10EC-00 - Park Brake Actuator Correlation. Customers may also comment on one or more of the following: The vehicle will not shift out of Park. Electronic Parking Brake (EPB) is not responding and not allowing the driver to release EPB. The Service TPM System message may display on the cluster after a tire rotation. NOTE: The vehicle will not automatically relearn tire locations and the process will have to be manually performed by a dealer technician. This bulletin involves reprogramming the ABS module with the latest available software.

Power surge on USB hub detected Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle.

Power surge on USB hub detected Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle

Power surge on USB hub detected Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle

B1A17-00 in The Radio Frequency Hub (RFH)

A)

pump under the second row seat.

This update will eliminate the false occurrence of the DTCs below: C10EA-00 - Left Park Brake Actuator C10EB-00 - Right Park Brake Actuator C10EC-00 - Park Brake Actuator Correlation

Vehicle Has Electronic Stability Control (ESC) Lamp On. C0042 Brake Pedal Position Diagnostic Trouble Codes (DTCs)