2022 Chrysler Pacifica TSBs

Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Do not diagnose stored or active DTC unless there is a customer facing issue noted. A SOL will be released to give further information.

Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): B1E21-96 - Backup Battery Component Internal Failure.

the radio: "Battery of Uconnect Box requires service. SOS call and related functions may be unavailable. Please visit an authorized dealer." PLEASE do not Replace the TBM module, only replace TBM Internal Battery (inside Telematics Box Module) and order PN68493347

Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): B1E21-96 - Backup Battery Component Internal Failure

Tire Pressure Sensors Values Are Not Displayed

Order a Z part number for all Exchange Orders: Warranty, Mopar, customer pay and service contract. Order regular part number for New unsold units only.

to vehicles equipped with: 3 Zone Auto Control-Front/Rear A/C (Sales Code HAH). Air Conditioning w/3 Zone Temp Cntrl (Sales Code HAK). All Vehicles W/Air Conditioning (Sales Code HA0). Rear Air Conditioning w/Heater (Sales Code HBB). This bulletin involves updating the HVAC with the latest available software.

Order a Z part number for all Exchange Orders: Warranty, Mopar, customer pay and service contract. Order regular part number for New, Unsold units only. Please review the latest version of SOL S2208000030 regarding DVD/blue ray issues. After updating software perform resets on both display or concern may still appear. After Battery Drainage VRM do not work. Please follow the following steps. 1. Check VRM proxi, if the VRM is not aligned, perform proxi alignment, reset module. 2. If proxi is correct, reset module 3. Check for DTCs, and check wiring and components related to those DTCs and clear them."

Canister, only replace the ESIM Detector. -Before replacing the Vapor Canister due to Hard to Fill condition, replicate the condition at the Gas Station. If the condition is replicated, then check: 1) for kinked or pinched Clean Air Hose between the ESIM and the EVAP Air Filter; 2) for plugged EVAP Air Filter; 3) for kinked or pinched Vapor Hose between the Fuel Tank and the Vapor Canister. If the EVAP Filter is restricted, the replace the Filter. -Check if the Vapor Canister is flooded with fuel or the Recirculation Line has fuel. If fuel is found in the Vapor Canister or the Recirculation Line, then drop the Fuel Tank, remove the FDM Lock Ring to check if the internal Vapor Line is properly connected to the FDM Port. If the Vapor Line is not connected, then drain the fuel from the internal Vapor Line and properly connect to the FDM. Replace the Vapor Canister and the ESIM."

experience the following: Update URLs for ADAs whitelist to collect data from ADAS customer. No customer impact. No customer symptoms. Other Software Enhancements included: Improves vehicle data communication with server for App data management performance.

Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

screen with audio still functional. (Rearview Camera functions normally). This bulletin involves updating the DSM with the latest available software."

Chime"

illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): U0140-00 - Lost Communication With Body Control Module. Customers may comment on one or more of the following: Left power sliding door inoperable. Right power sliding door inoperable. This bulletin involves updating the PDSM with the latest available software."

Radio freeze after reverse event (Rearview Camera (RVC) functions normally). Blank hybrid screen. Screen off at start up (RVC functions normally). Radio restart before sleep after switching between different USBs. Pop up error ""setting not saved"" occurring when attempting to enable Geolocation (Privacy Mode Off). Amplifier module sets Diagnostic Trouble Code (DTC) U0485 - Implausible Data Received From Radio. During FOTA scheduling, if OK is not pressed to confirm time selected, vehicle will sleep. Apps downloaded for one connected profile are being shared with other local profiles. Switching profiles with slow response. Slow response switching between camera views. Black radio screen (RVC functions normally). Rear seat reminder alert unavailable. Wi-Fi software update pop-up is being triggered in non-connected vehicles. Switching to Android menu, display screen blinks on green color. Microphone inoperative during SOS call from the vehicle. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from **T25.50 or T27.39** to U29.28. NOTE: The national launch for the FOTA is expected to begin **July 29, 2024.**"

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On "

VRM not turning on during ignition cycle. This bulletin involves updating the VRM with the latest available software."

This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from 4.34 and 4.36 to 4.37. NOTE: National launch for this FOTA update is expected to begin May 31, 2024 for RU, WD and June 30, 2023 for MP."

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

After updating software perform resets on both display or concern may still appear.

to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

one or more of the following: ? Uconnect Box requires service message at start up. ? Losing Wi-Fi Hotspot streaming connection: internet data is not reliable. ? User is unable to setup the Charge schedule/Climate schedule events in Uconnect App (TBM is sending failure message). ? LED blinking on overhead console after ignition cycle. These conditions do not affect the rear view camera display. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from 4.29c to 4.36. NOTE: The national launch for the FOTA is expected to begin September 08, 2023.

1) . ? Uconnect box backup ?battery low? message on the radio. ? WiFi hotspot streaming lost. ? Rear mirror LED blinking after ignition cycle. ? Uconnect App charge schedule / climate schedule setup issue. ? Customer not seeing profile or other vehicle information on the mobile app. This bulletin involves updating the TBM software from 4.29d to 4.36.

This bulletin involves updating the RFHM module with the latest available software.

? Uconnect pop up box error or requires service message. ? Losing WiFi Hotspot streaming connection: internet data is not reliable. ? LED blinking on overhead console after ignition cycle. ? User is unable to setup the Charge schedule/Climate schedule events in Uconnect App (TBM is sending failure message). This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from (WD - 4.27i.) and (RU - 4.29d) to 4.36.

U11E9 Lost Communication With AGS. Ambient Air Temp Incorrectly Displayed. P0070 And P0073 Set For Ambient Air Temp Sensor

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

After updating software perform resets on both display or concern may still appear.

This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S26.15 to S26.17. NOTE: National launch for this FOTA update is expected to begin February 09, 2023.

P0D27, ensure to clear the codes and perform a charging test. If the codes come back again, proceed with the replacement.

Cable, Battery Charger

Tire Pressure Sensors Values Are Not Displayed

The customer may experience the following: VRM not turning on during ignition cycle.

Customers may experience: Intermittent passive entry feature on the front doors are inoperative.

A missing security certificate or after a new TBM installed, or any active DTC set by TBM will trigger this popup. Please refer to STAR Online S2108000015 for more information. If you continually see this popup message, also see an active B22A9-93 DTC, please use wiTECH tool to check TBM2 module and record the failure information as shown on STAR Online S228A000003. Before replacing the TBM module, please check connections behind the TBM, the antenna and harness for improper connection and damage. Please call FCA Redacted Content

Battery, Hybrid

the MSM and MSMP module with the latest software available. Customers may experience the following:Driver and/or Passenger seats do not move to the stored position when a memory recall is requested through the radio.

updating the HCP and AHCP with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC):P0E15 - Hybrid-EV Battery Pack Coolant Heater A Control Performance. The customer may also comment on the following:Electric Vehicle (EV) mode may be inoperable. May notice a reduction in cabin heater performance.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find the following Diagnostic Trouble Code (DTC) has been set: B22A9-64 - ECU Internal Performance-Signal Plausibility Failure. Customer may also experience the following:Unable to utilize the plug in charge cord to charge the vehicle.

U11E9 Lost Communication With AGS. Ambient Air Temp Incorrectly Displayed. P0070 And P0073 Set For Ambient Air Temp Sensor

Improper handling of damaged lithium ion batteries can cause property damage, serious injury or even death. Exemptions will not be made for any dealer who fails to follow the appropriate handling process.To read the DCMail communication, go to DealerCONNECT > DCMail (ID: 81758) For details on recyclers, please visit the Mopar Dealer Site Lithium Ion Battery Handling page: https://www.dealers-mopar.com/moparone/retail/programs/battery-program/lithium-ion.jsp

Tire Pressure Sensors Values Are Not Displayed

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic trouble Codes (DTCs) have been set: U11E9 - Lost Communication With AGS. P0070-15 - Ambient Air Temperature Sensor Circuit-Circuit Short To Battery Or Open. P0070-11 - Ambient Air Temperature Sensor Circuit-Circuit Short To Ground. P0073 - Ambient Air Temperature Sensor Circuit High.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic trouble Codes (DTCs) have been set: U11E9 - Lost Communication With AGS. P0070-15 - Ambient Air Temperature Sensor Circuit-Circuit Short To Battery Or Open. P0070-11 - Ambient Air Temperature Sensor Circuit-Circuit Short To Ground. P0073 - Ambient Air Temperature Sensor Circuit High.

The customer may experience the following: VRM not turning on during ignition cycle.

Customers may experience: Intermittent passive entry feature on the front doors are inoperative.

Ambient Air Temperature Sensor Circuit-Circuit Short to Battery or Open, P0073 Ambient Air Temperature Sensor Circuit High

A missing security certificate or after a new TBM installed, or any active DTC set by TBM will trigger this popup. Please refer to STAR Online S2108000015 for more information. If you continually see this popup message, also see an active B22A9-93 DTC, please use wiTECH tool to check TBM2 module and record the failure information as shown on STAR Online S228A000003. Before replacing the TBM module, please check connections behind the TBM, the antenna and harness for improper connection and damage. Please call FCA Redacted Content

The customer may experience the following: VRM not turning on during ignition cycle.

Customers may experience: Intermittent passive entry feature on the front doors are inoperative.

Ambient Air Temperature Sensor Circuit-Circuit Short to Battery or Open, P0073 Ambient Air Temperature Sensor Circuit High

A missing security certificate or after a new TBM installed, or any active DTC set by TBM will trigger this popup. Please refer to STAR Online S2108000015 for more information. If you continually see this popup message, also see an active B22A9-93 DTC, please use wiTECH tool to check TBM2 module and record the failure information as shown on STAR Online S228A000003. Before replacing the TBM module, please check connections behind the TBM, the antenna and harness for improper connection and damage. Please call FCA Redacted Content

Cable, Battery Charger

Tire Pressure Sensors Values Are Not Displayed

the MSM and MSMP module with the latest software available. Customers may experience the following:Driver and/or Passenger seats do not move to the stored position when a memory recall is requested through the radio.

updating the HCP and AHCP with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC):P0E15 - Hybrid-EV Battery Pack Coolant Heater A Control Performance. The customer may also comment on the following:Electric Vehicle (EV) mode may be inoperable. May notice a reduction in cabin heater performance.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find the following Diagnostic Trouble Code (DTC) has been set: B22A9-64 - ECU Internal Performance-Signal Plausibility Failure. Customer may also experience the following:Unable to utilize the plug in charge cord to charge the vehicle.

U11E9 Lost Communication With AGS. Ambient Air Temp Incorrectly Displayed. P0070 And P0073 Set For Ambient Air Temp Sensor

Improper handling of damaged lithium ion batteries can cause property damage, serious injury or even death. Exemptions will not be made for any dealer who fails to follow the appropriate handling process.To read the DCMail communication, go to DealerCONNECT > DCMail (ID: 81758) For details on recyclers, please visit the Mopar Dealer Site Lithium Ion Battery Handling page: https://www.dealers-mopar.com/moparone/retail/programs/battery-program/lithium-ion.jsp

connector between the left body harness and the liftgate harness. The customer may experience the following: The rear wiper is inoperative.

Customers may experience: When parked, power liftgate opens inadvertently without any customer input.

"Service Hybrid System" message on cluster AND scan / WiTech report shows evidence of a P2BE0-00 fault code, please contact the following individual prior to servicing the vehicle: P2BE0-00 - HYBRID/EV BATTERY COOLANT LEVEL FCA Redacted Content If possible, please capture a picture of the coolant level on battery bottle before replacing any components in the area (sensor, bottle, etc.). Requesting picture be attached to claim information. If no response within 15 minutes, proceed with repair.

Battery, Hybrid

the MSM and MSMP module with the latest software available. Customers may experience the following:Driver and/or Passenger seats do not move to the stored position when a memory recall is requested through the radio.

updating the HCP and AHCP with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC):P0E15 - Hybrid-EV Battery Pack Coolant Heater A Control Performance. The customer may also comment on the following:Electric Vehicle (EV) mode may be inoperable. May notice a reduction in cabin heater performance.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find the following Diagnostic Trouble Code (DTC) has been set: B22A9-64 - ECU Internal Performance-Signal Plausibility Failure. Customer may also experience the following:Unable to utilize the plug in charge cord to charge the vehicle.

U11E9 Lost Communication With AGS. Ambient Air Temp Incorrectly Displayed. P0070 And P0073 Set For Ambient Air Temp Sensor

Improper handling of damaged lithium ion batteries can cause property damage, serious injury or even death. Exemptions will not be made for any dealer who fails to follow the appropriate handling process.To read the DCMail communication, go to DealerCONNECT > DCMail (ID: 81758) For details on recyclers, please visit the Mopar Dealer Site Lithium Ion Battery Handling page: https://www.dealers-mopar.com/moparone/retail/programs/battery-program/lithium-ion.jsp

Battery, Hybrid

the MSM and MSMP module with the latest software available. Customers may experience the following:Driver and/or Passenger seats do not move to the stored position when a memory recall is requested through the radio.

updating the HCP and AHCP with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC):P0E15 - Hybrid-EV Battery Pack Coolant Heater A Control Performance. The customer may also comment on the following:Electric Vehicle (EV) mode may be inoperable. May notice a reduction in cabin heater performance.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find the following Diagnostic Trouble Code (DTC) has been set: B22A9-64 - ECU Internal Performance-Signal Plausibility Failure. Customer may also experience the following:Unable to utilize the plug in charge cord to charge the vehicle.

U11E9 Lost Communication With AGS. Ambient Air Temp Incorrectly Displayed. P0070 And P0073 Set For Ambient Air Temp Sensor

Improper handling of damaged lithium ion batteries can cause property damage, serious injury or even death. Exemptions will not be made for any dealer who fails to follow the appropriate handling process.To read the DCMail communication, go to DealerCONNECT > DCMail (ID: 81758) For details on recyclers, please visit the Mopar Dealer Site Lithium Ion Battery Handling page: https://www.dealers-mopar.com/moparone/retail/programs/battery-program/lithium-ion.jsp

must be followed for BEV/Hybrid vehicles that are on display at dealership showrooms.

or B1570-93

TBM Setting Stored Or Pending DTCs B22A9, B1560, B1561, B1562

Order a Z part number for all Exchange Orders: warranty, Mopar, customer pay and service contract. Order regular part number for New unsold units only."

Follow the Infotainment Ordering guide available under the "Parts" section of Dealer Connect: DealerCONNECT> Parts> News& Information> Audio & Electronic Products Exchange Process

the following: Unable to select the Turn by Turn Navigation. Blank Performance Pages (Rearview Camera (RVC) Functions Normally). **Android Auto Voice Recognition (VR) inoperative.** Media Tuner delayed. **Charge Schedule not accepting updates via phone (RVC Functions Normally).** Ambient light inoperative. **Instrument Panel Cluster (IPC) map inoperative.** Media widget blank. Navigation map black. Off road pages inoperative (RVC Functions Normally). VR inoperative. Incorrect song title displayed **(Apple CarPlay only)**. **Radio display switches from the Media page to the Home page (RVC Functions Normally).** Ghost touch on Navigation screen (RVC Functions Normally). Widgets are missing. New User Profile does not load. Display returns to the wrong page after the View ""Camera Event"" button is selected by customer in the ""Camera View Pages"" (RVC Functions Normally). This bulletin provides information regarding the latest FOTA update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from U29.28 or U33.9 to U33.43. NOTE: The Estimated National launch date is August 31, 2024."

the following: Unable to select the Turn by Turn Navigation. Blank Performance Pages (Rearview Camera (RVC) Functions Normally). Android Auto Voice Recognition inoperative. Media Tuner delayed. Charge Schedule HMI (RVC Functions Normally). Ambient Light inoperative. Map in Cluster inoperative. Media Widget blank. Navigation Map black. Off road pages inoperative (RVC Functions Normally). VR inoperative. Incorrect song title displayed (Carplay only). HU switches from Media Page to Home Page (RVC Functions Normally). Ghost Touch on Navigation screen (RVC Functions Normally). Widgets missing. New user profile does not load. Returns to wrong page after View Camera Event selected by customer in the ""Camera View Pages"" (RVC Functions Normally). This bulletin provides information regarding the latest FOTA update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from U29.28 or U33.9 to U33.43. NOTE: The Estimated National launch date is August 31, 2024."

continues to reboot after a Map Update (MOTA). ? Navigation regularly cuts out and back on again. ? Radio switches to navigation without customer's input. This bulletin involves updating the Navigation maps via USB.

inoperative.** ? Right and/or Left rear seat entertainment screen(s) goes blank. This bulletin involves checking and if needed, updating the software on both rear seat entertainment display screens.

U11E9 Lost Communication With AGS. Ambient Air Temp Incorrectly Displayed. P0070 And P0073 Set for Ambient Air Temp Senso

display (this is a radio to display signal issue, not a rearview camera to display signal issue), prior to replacing this part, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S21D.5 and S23.13 to S24.18The national launch for the FOTA is expected to begin on:WS - May 24, 2022 WL - May 31, 2022 RU - S21D.5 to S24.18, June 06, 2022 RU - S23.13 to S24.18, May 21, 2022 Customers may experience one or more of the following: Navigation inoperative. Black or blank radio screen (Rear View Camera (RVC) will still function normally). Radio lockup (RVC will still function normally). Surround sound inoperative. Blu-ray DVD unavailable. Listen in/Mirror feature inoperative. PHEV radio does not turn off when opening door or after charging. No Verbal warnings on navigation. Audio Overlap between sources. Radio doesn?t recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. Radio presets are not saving. Audio mute on calls (Phone, SOS and Ecall). Radio resets. Radio screen freezes. The rear view camera display, will work properly if the radio display screen freezes. Audio disruptions. Unable to connect compatible wireless connectivity device. Wireless connectivity disconnecting. Improvements are included with this update: Apple CarPlay and Android Auto improvements. Voice Recognition improvements. Uconnect Phone improvements.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. National launch for this FOTA update is expected on:Current Level R139.01.53 update to R141.01.12, launched on 02/08/2022. Current Level R136.10.04 update to R141.01.12, launched on 02/11/2022. Current Level R136.09.00 update to R141.01.12, launched on 02/16/2022. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM after switching user profiles. In light them mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM radio audio is playing in vehicle speakers while call is ongoing. SXM radio stuck on current channel, no audio and can't navigate to other channels using soft keys or knob.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM? radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

seat entertainment display screens. Customer may experience the following: Right and/or Left rear seat entertainment screen(s) goes blank.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S21D.5 and S23.13 to S24.18The national launch for the FOTA is expected to begin on:WS - May 24, 2022 WL - May 31, 2022 RU - S21D.5 to S24.18, June 06, 2022 RU - S23.13 to S24.18, May 21, 2022 Customers may experience one or more of the following: Navigation inoperative. Black or blank radio screen (Rear View Camera (RVC) will still function normally). Radio lockup (RVC will still function normally). Surround sound inoperative. Blu-ray DVD unavailable. Listen in/Mirror feature inoperative. PHEV radio does not turn off when opening door or after charging. No Verbal warnings on navigation. Audio Overlap between sources. Radio doesn?t recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. Radio presets are not saving. Audio mute on calls (Phone, SOS and Ecall). Radio resets. Radio screen freezes. The rear view camera display, will work properly if the radio display screen freezes. Audio disruptions. Unable to connect compatible wireless connectivity device. Wireless connectivity disconnecting. Improvements are included with this update: Apple CarPlay and Android Auto improvements. Voice Recognition improvements. Uconnect Phone improvements.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S21D.5 and S23.13 to S24.18The national launch for the FOTA is expected to begin on:WS - May 24, 2022 WL - May 31, 2022 RU - S21D.5 to S24.18, June 06, 2022 RU - S23.13 to S24.18, May 21, 2022 Customers may experience one or more of the following: Navigation inoperative. Black or blank radio screen (Rear View Camera (RVC) will still function normally). Radio lockup (RVC will still function normally). Surround sound inoperative. Blu-ray DVD unavailable. Listen in/Mirror feature inoperative. PHEV radio does not turn off when opening door or after charging. No Verbal warnings on navigation. Audio Overlap between sources. Radio doesn?t recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. Radio presets are not saving. Audio mute on calls (Phone, SOS and Ecall). Radio resets. Radio screen freezes. The rear view camera display, will work properly if the radio display screen freezes. Audio disruptions. Unable to connect compatible wireless connectivity device. Wireless connectivity disconnecting. Improvements are included with this update: Apple CarPlay and Android Auto improvements. Voice Recognition improvements. Uconnect Phone improvements.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. National launch for this FOTA update is expected on:Current Level R139.01.53 update to R141.01.12, launched on 02/08/2022. Current Level R136.10.04 update to R141.01.12, launched on 02/11/2022. Current Level R136.09.00 update to R141.01.12, launched on 02/16/2022. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM after switching user profiles. In light them mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM radio audio is playing in vehicle speakers while call is ongoing. SXM radio stuck on current channel, no audio and can't navigate to other channels using soft keys or knob.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM? radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following:Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Compass not showing or showing incorrect direction. When on a phone call with wireless connectivity, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from S21D.5 and S23.13 to S24.18 The national launch for the FOTA is expected to begin on:WS - May 24, 2022 WL - May 31, 2022 RU - S21D.5 to S24.18, June 06, 2022 RU - S23.13 to S24.18, May 21, 2022 Customers may experience one or more of the following:Surround sound inoperative. Blu-ray DVD unavailable. Listen in/Mirror feature inoperative. PHEV radio does not turn off when opening door or after charging. No Verbal warnings on navigation. Audio Overlap between sources. Radio doesn?t recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. Radio presets are not saving. Audio mute on calls (Phone, SOS and Ecall). Radio resets. Radio screen freezes. The rear view camera display, will work properly if the radio display screen freezes. Audio disruptions. Unable to connect compatible wireless connectivity device. Wireless connectivity disconnecting. Improvements are included with this update:Apple CarPlay and Android Auto improvements. Voice Recognition improvements. Uconnect Phone improvements.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM? radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with wireless connectivity, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. National launch for this FOTA update is expected on:Current Level R139.01.53 update to R141.01.12, launched on 02/08/2022. Current Level R136.10.04 update to R141.01.12, launched on 02/11/2022. Current Level R136.09.00 update to R141.01.12, launched on 02/16/2022. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM after switching user profiles. In light them mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM radio audio is playing in vehicle speakers while call is ongoing. SXM radio stuck on current channel, no audio and can't navigate to other channels using soft keys or knob.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM? radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

B1561-13

B1561-13

(FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. National launch for this FOTA update is expected on:Current Level R139.01.53 update to R141.01.12, launched on 02/08/2022. Current Level R136.10.04 update to R141.01.12, launched on 02/11/2022. Current Level R136.09.00 update to R141.01.12, launched on 02/16/2022. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM after switching user profiles. In light them mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM radio audio is playing in vehicle speakers while call is ongoing. SXM radio stuck on current channel, no audio and can't navigate to other channels using soft keys or knob.

The software will be updated to 141.01.12.00. Customers may experience one or more of the following: Phone notification volume pops up while switching between driver profiles. Media widget gets "blacked out" on SXM? after switching user profiles. In light theme mode and in balance/fade menu, hard to see the position icon. In shortcuts menu pulled down from status bar, the right side arrow is highlighted like it can be selected. This should be greyed out like the left arrow. Loss of SXM? radio saved presets. Compass not showing or showing incorrect direction. When on a phone call with bluetooth, echo noise can be heard. SXM? radio audio is playing in vehicle speakers while call is ongoing. SXM? radio stuck on current channel, no audio and unable to navigate to other channels using soft keys or knob.

illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** **P152F Engine Hood Switch 2 / Engine Hood Switch 1 Correlation.** **Customers may also comment on one or more of the following:** **Engine Start/Stop feature is inoperable.** Battery depletes. Rough shifting while driving. Poor vehicle response and drop in engine speed when making light changes to the accelerator pedal position. Drop in engine speed when in 5th gear and decelerating. Engine RPM drops during the coast down or braking. This bulletin involves reprogramming the PCM with the latest available software.

This data collection is applicable to all vehicle with engines with sales codes: ERG, ERC, EH3 and ERF. To assist with monitoring and quality improvement of the 3.6L engine, every time a vehicle comes for any of the first 3 oil changes, please use wiTECH to record the total engine idle time and the total engine runtime. 1. Prior to perform the oil change connect wiTECH diagnostic tool. 2. Navigate to the topology screen on the action item section. 3. Once the topology screen loads, disconnect wiTECH and continue with oil change.

There may also be associated driveability issues. Upon further investigation, the following fault codes may be found in the PCM:

roller-finger followers (rocker arms) separately, as these are included in the camshaft parts kit.

Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition (compressible plunger) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition (non-compressible plunger) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER(S) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component.

Powertrain Mounting Neutralization Procedure. Discussion: Service information is in the process of being updated to include powertrain mount installation best practices. The new procedure will neutralize the mounts to lessen or remove unwanted mount tension that can lead to vibration complaints.

Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0301 - Cylinder 1 Misfire. P0302 - Cylinder 2 Misfire. P0303 - Cylinder 3 Misfire. P0304 - Cylinder 4 Misfire. P0305 - Cylinder 5 Misfire. P0306 - Cylinder 6 Misfire. Customers may comment on one or more of the following: Rough idle. Valvetrain noise. "

Refer to SOL # S2509000004. It is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software.

Diagnostic Trouble Code (DTC) U0485 - Implausible Data Received Set. Radio reset (Rearview camera functions normally). Voice Recognition (VR) inoperable. Wireless CarPlay inoperable. Audio sources inoperable. Display switches to Nav on VR prompt. Vehicle Positioning (Lat/Long) inoperable. Surround View Camera inoperable (Rearview camera functions normally). Unable to exit FamCam. Audio Repetition inoperable. Electric vehicle pages inoperable. Translated text is incorrect. Profile avatar changes in Valet Mode. Display does not return to idle mode after call. Dynamic rear view camera guidelines inoperable (Rearview camera functions normally). FOTA popup wont dismiss. Ambient Lights Setting inoperable. Call Status on after all ended Favorites available in valet mode. SXMT Favorites inoperable. Tutorial App inoperable. Audio Repetition stops during incoming calls. Unable to connect second device. Unable to exit Seat Comfort popup. Call does not end on the Instrument Panel Cluster (IPC). Seat Comfort graphic incorrect. Headphone button for front passenger display inoperable. Schedule update inoperable. USB media source inoperable on front passenger display. SXMT inoperable. Wireless Android Auto inoperable. Media sources duplicated. Audio unmuted at door close. Radio freeze (Rearview camera functions normally). Radio input lagging. Navigation active with no active route. Scheduled cabin cooling inoperable. Incorrect phone repetition displayed. Navigation routing inoperable. Unable to exit Electric Vehicle Pages. Comfort softkeys incorrect. Comfort graphic overlap. Unable to change audio sources. Audio sources unavailable after profile switch. No incoming call popup on Uconnect phone. FamCam image in black and white. SOS call status banner remains after call ended. Press and hold inoperable on comfort temperature slider. Setting preferences will not return to default. Display input lagging after CarPlay is connected. Changing to unselected audio source. Setting preferences not saved on correct profile. Translation error in Portuguese. Memory seats not saved on correct profile. Audio loss. Incorrect keyboard in Japanese. SXMT channel art incorrect. Rear Seat Entertainment (RSE) audio overlap. European Media Source (DAB) available on North America vehicles. Black screen (Rearview camera functions normally). Unable to delete profile. Assist call inoperable. Unable to navigate menu with ongoing SOS call. This update also includes the following software enhancements: Radio Software stability issues and moving to new U-branch software for core improvement This bulletin involves inspecting the software level and updating the software to U29.28. "

These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets). Once it is confirmed that the repair will be done using the camshaft/Rocker arms kit, it is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software update.

vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): P06DD - Engine Oil Pressure Control Circuit Stuck Off. Customers may comment on the following: Oil found on the ground beneath the vehicle. "

These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets)."

*Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** P0A3F - Drive Motor A Position Sensor 1 Circuit. P0A43 - Drive Motor A Position Sensor Circuit Intermittent. P0A45 - Drive Motor B Position Sensor 1 Circuit. P0C1A - Drive Motor B Torque Delivered Performance. Customers may also comment on the following: Vehicle is in limp mode. Module flashes are also required for this Repair Procedure to be effective, the following modules are to be updated: Hybrid Control Processor (HCP). Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM "

Check DTCs in DCM and check the component they are pointing to, depending on the case follow the procedure below: If there are DTCs related with power sliding door switch, sliding door latch or handle follow the next procedure: - The sliding door should be put into manual operation mode. If the door still opens and closes manually, door modules should be reset, if the DTC's don't go stored or door/body module resets have not solved the issue, then replace the latch. If in manual operation mode the door does not open, replace the latch. In the case of window inoperation, follow the next procedure: - Check wiring between motor and Door Control module, if it is in good state, check motor, and if needed replace it. If wiring is well seated, and the motor is in good state, reset module and perform window calibration, if DTCs don't go stored or the window continue not working, replace the Door Control Module.

There may be Diagnostic Trouble Codes (DTCs) present. "

PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures."

Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0A3F - Drive Motor A Position Sensor 1 Circuit. ? P0A43 - Drive Motor A Position Sensor Circuit Intermittent. ? P0A45 - Drive Motor B Position Sensor 1 Circuit. ? P0C1A - Drive Motor B Torque Delivered Performance. Customers may also comment on the following: ? Vehicle is in limp mode. Module flashes are also required for this Repair Procedure to be effective, the following modules are to be updated: ? Hybrid Control Processor (HCP). ? Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). This bulletin involves replacing the transmission.

following: Amplifier module sets Diagnostic Trouble Code (U0485 - Implausible Data Received Set. Radio reset (Rearview camera functions normally). Voice Recognition inoperable. Wireless CarPlay inoperable.Audio sources inoperable. Display switches to Nav on VR prompt. Vehicle Positioning (Lat/Long) inoperable. Surround View Camera inoperable (Rearview camera functions normally). Unable to exit FamCam. Audio Repetition inoperable. Electric vehicle pages inoperable. Translated text is incorrect. Profile avatar changes in Valet Mode. Display does not return to idle mode after call. Dynamic rear view camera guidelines inoperable (Rearview camera functions normally). FOTA popup won?t dismiss. Ambient Lights Setting inoperable. Call Status on after all ended Favorites available in valet mode. SXM Favorites inoperable. Tutorial App inoperable. Audio Repetition stops during incoming calls. Unable to connect second device. Unable to exit Seat Comfort popup. Call does not end on the Instrument Panel Cluster. Seat Comfort graphic incorrect. Headphone button for front passenger display inoperable. Schedule update inoperable. USB media source inoperable on front passenger display. SXM inoperable. Wireless Android Auto inoperable. Media sources duplicated. Audio unmuted at door close. Radio freeze (Rearview camera functions normally). Radio input lagging. Navigation active with no active route. Scheduled cabin cooling inoperable. Incorrect phone repetition displayed. Navigation routing inoperable. Unable to exit electric vehicle Pages. Comfort softkeys incorrect. Comfort graphic overlap. Unable to change audio sources. Audio sources unavailable after profile switch. No incoming call popup on Uconnect phone. FamCam image in black and white. SOS call status banner remains after call ended. Press and hold inoperable on comfort temperature slider.

Customer complaints may include a noise coming from under de hood described as a squeal, screech, squeak, chirp or "belt related" noise and/or noisy tensioner/pulley. Please check Service Library for any STAR Online publications that may apply. Note: If it is found that the pulleys and/or tensioners are to blame for the noise please use an stethoscope or similar tool to determine the origin of the noise and include it in the narrative.

PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.

? Battery drain. ? SXM? radio shows one station on screen but is playing a different station. ? Navigation inoperative. ? Black or blank radio screen (Rear View Camera (RVC) will still function normally). ? Radio lockup (RVC will still function normally). ? No Verbal warnings on navigation. ? Surround sound inoperative. ? Blu-ray? DVD unavailable. ? Listen in/Mirror feature inoperative. ? PHEV radio does not turn off when opening door or after charging. ? Audio Overlap between sources. ? Radio does not recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. ? Radio presets are not saving. ? Audio mute on calls (Phone, SOS and Ecall). ? Radio Resets (Rear view camera will still function normally). ? Radio screen freezes (RVC will still function normally). ? Audio disruptions. ? Wireless connectivity device disconnect. ? Wireless connectivity disconnecting. ? CarPlayT icon does not appear in device manager. ? Climate icon missing. ? SXM? inoperative. ? Audio muted. ? Missing profiles icon. ? Cluster displays incorrect audio source. ? Radio is slow to respond. ? Steering wheel controls skipping SXM channels. ? Recent calls not displayed. ? Phone audio playing with ignition off. The following software enhancements are available: ? Uconnect Phone improvements. ? Apple CarPlayT and Android AutoT improvements. ? Voice recognition command improvements. ? FOTA enhancements. This bulletin involves inspecting the software level and updating the software to S26.17.

? Belt could snap eventually resulting in water pump and alternator not being driven leading to overheating and dead battery. This bulletin involves inspecting and if necessary replacing the serpentine belt and tensioner pulley

For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head. The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present.

published diagnostic information for this DTC to ensure all module connections are secure. Please check all the connections at BCM from other modules that could potentially report a loss of communication with the BCM and ensure that they are fully seated as per diagnostic information. Some affected modules may include : HVAC-R, Radio, Amplifier (AMP) & Premium, HVAC, ORC, LBSS, RBSS, PCM, EPS, MSMP, AHLM, PTS/PAM, ICS, ESM, RF Hub, RCCC, MSMD, ANC, PLGM, PSDML, DMRL, DMRR, PSDMR, TBM, PDM(DMFL/R), DDM(DMFL/R), DTCM, OCM, ACC, FFCM, DSM, CVPM, VRM, SCCM, FSM, CSWM. *Ensure to check all the wiring harness connected to BCM with Other Modules are proper. *Please disconnect the Battery Negative Cable for 15 minutes and then reconnect. *Clear the codes and check to see if any active DTC's return for U0140 n *If still DTCs U0140 presents then contact Engineering Expert:FCA Redacted Content

PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.

Diagnostic Trouble Code (DTC) U0485 - Implausible Data Received Set. ? Radio reset (Rearview camera functions normally). ? Voice Recognition (VR) inoperable. ? Wireless CarPlayTT inoperable. ? Audio sources inoperable. ? Display switches to Nav on VR prompt. ? Vehicle Positioning (Lat/Long) inoperable. ? Surround View Camera inoperable (Rearview camera functions normally). ? Unable to exit FamCam. ? Audio Repetition inoperable. ? Electric vehicle pages inoperable. ? Translated text is incorrect. ? Profile avatar changes in Valet Mode. ? Display does not return to idle mode after call. ? Dynamic rear view camera guidelines inoperable (Rearview camera functions normally). ? FOTA popup won?t dismiss. ? Ambient Lights Setting inoperable. ? Call Status on after all ended Favorites available in valet mode. ? SXMTT Favorites inoperable. ? Tutorial App inoperable. ? Audio Repetition stops during incoming calls. ? Unable to connect second device. ? Unable to exit Seat Comfort popup. ? Call does not end on the Instrument Panel Cluster (IPC). ? Seat Comfort graphic incorrect. ? Headphone button for front passenger display inoperable. ? Schedule update inoperable. ? USB media source inoperable on front passenger display. ? SXMTT inoperable. ? Wireless Android AutoT inoperable. ? Media sources duplicated. ? Audio unmuted at door close. ? Radio freeze (Rearview camera functions normally). ? Radio input lagging. ? Navigation active with no active route. ? Scheduled cabin cooling inoperable. ? Incorrect phone repetition displayed ? Navigation routing inoperable. ? Unable to exit Electric Vehicle Pages. ? Comfort softkeys incorrect. ? Comfort graphic overlap. ? Unable to change audio sources. ? Audio sources unavailable after profile switch. ? No incoming call popup on Uconnect

Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0A3F - Drive Motor A Position Sensor 1 Circuit. ? P0A43 - Drive Motor A Position Sensor Circuit Intermittent. ? P0A45 - Drive Motor B Position Sensor 1 Circuit. ? P0C1A - Drive Motor B Torque Delivered Performance. Customers may also comment on the following: ? Vehicle is in limp mode. Module flashes are also required for this Repair Procedure to be effective, the following modules are to be updated: ? Hybrid Control Processor (HCP). ? Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). This bulletin involves replacing the transmission.

If no response in 15 minutes, proceed with repair.

Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? P0E80-00 - Coolant Bypass Valve B Control Stuck Closed. ? P0E7F-00 - Coolant Bypass Valve B Control Stuck Open. Customer may also experience the following: ? Electric mode may be disabled but vehicle can still be driven in gas mode. This bulletin involves possibly replacing the Three Way Coolant Valve.

Misfire or rough running.

There may be Diagnostic Trouble Codes (DTCs) present.

There may be Diagnostic Trouble Codes (DTC)s present.

There may be Diagnostic Trouble Codes (DTC)s present. This bulletin involves inspecting and if needed, replacing the intake HLAs. NOTE: **ALL VEHICLES ON THE RSU VIN LIST REQUIRE ALL 12 INTAKE HYDRAULIC LASH ADJUSTERS TO BE REPLACED**.

presence, only AB or previous LEVEL PSU right intake camshaft PN 05047913AA or AB (old version) should be replaced. If the engine is equipped with the AC/AD LEVEL PSU right intake camshaft PN 05047913AC or AD (new version), camshaft should NOT be replaced. Case 2) If the intake camshaft or intake rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6).

noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head (no need to replace rocker arms). The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. Case 2.- If the INTAKE camshaft or INTAKE rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6).

There may be Diagnostic Trouble Codes (DTC)s present. This bulletin involves inspecting and if needed, replacing the intake HLAs.

Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0A3F - Drive Motor A Position Sensor 1 Circuit. ? P0A43 - Drive Motor A Position Sensor Circuit Intermittent. ? P0A45 - Drive Motor B Position Sensor 1 Circuit. ? P0C1A - Drive Motor B Torque Delivered Performance. Customers may also comment on the following: ? Vehicle is in limp mode. Module flashes are also required for this Repair Procedure to be effective, the following modules are to be updated: ? Hybrid Control Processor (HCP). ? Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). This bulletin involves replacing the transmission.

? Battery drain. ? SXM? radio shows one station on screen but is playing a different station. ? Navigation inoperative. ? Black or blank radio screen (Rear View Camera (RVC) will still function normally). ? Radio lockup (RVC will still function normally). ? No Verbal warnings on navigation. ? Surround sound inoperative. ? Blu-ray? DVD unavailable. ? Listen in/Mirror feature inoperative. ? PHEV radio does not turn off when opening door or after charging. ? Audio Overlap between sources. ? Radio does not recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. ? Radio presets are not saving. ? Audio mute on calls (Phone, SOS and Ecall). ? Radio Resets (Rear view camera will still function normally). ? Radio screen freezes (RVC will still function normally). ? Audio disruptions. ? Wireless connectivity device disconnect. ? Wireless connectivity disconnecting. ? CarPlayT icon does not appear in device manager. ? Climate icon missing. ? SXM? inoperative. ? Audio muted. ? Missing profiles icon. ? Cluster displays incorrect audio source. ? Radio is slow to respond. ? Steering wheel controls skipping SXM channels. ? Recent calls not displayed. ? Phone audio playing with ignition off. The following software enhancements are available: ? Uconnect Phone improvements. ? Apple CarPlayT and Android AutoT improvements. ? Voice recognition command improvements. ? FOTA enhancements. This bulletin involves inspecting the software level and updating the software to S26.17.

? Belt could snap eventually resulting in water pump and alternator not being driven leading to overheating and dead battery. This bulletin involves inspecting and if necessary replacing the serpentine belt and tensioner pulley

For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head. The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present.

This bulletin involves replacing the amplifier.

installed in the vehicle.

Active Grille Shutter (AGS) is set, please review Star OnlineS2008000132 for known concerns. Prior to replacing this part please call FCA Redacted Content. If no response in 15 minutes, please proceed with repair.

compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold For concerns of V8 oil filter leaks on 22MY and up vehicles: 1. Clean the area and use oil dye to know the exact location of the leak with black/UV light. 2. Removal torque (force needed to loosen the filter) 3. If the source of the leak cannot be identified, please contact FCA Redacted Content to FasTrak parts back for analysis. If no response in 15 minutes, proceed with repair and email pictures of the following: A) Oil filter from the bottom to know if it has a "Factory Installed" filter. B) Leak. C) Damage in filter (if any) D) Gasket. E) Block or Oil Filter Adapter(OFA) or Engine Oil Cooler(EOC) sealing surface.

installed in the vehicle.

Active Grille Shutter (AGS) is set, please review Star OnlineS2008000132 for known concerns. Prior to replacing this part please call FCA Redacted Content. If no response in 15 minutes, please proceed with repair.

Customers may experience the following: Audible drone after initial start up or during idle.

Engineering has updated the skirt height of the valve cover to address oil leaks. Replace the valve cover (part # 04893800AI (right side) or 04893799AH (left side)includes valve cover gasket) to ensure proper repair. Please call FCA Redacted Content to facilitate fast track shipment of failed part.

P0071, P0072, or P0073 codes, follow the diagnostic procedure. If the procedure directs you to replace the ambient air temp sensor, then please call FCA Redacted Content before replacing the part. If no answer in 15 minutes, proceed with repair.

All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

Customers may experience one or more of the following: Poor vehicle response and drop in engine speed when making light changes to the accelerator pedal position. Drop in engine speed when in 5th gear and decelerating. Engine RPM drops during the coast down or braking.

may later return for an oil leak. Engineering has updated the skirt height of the valve cover to address oil leaks. Replace the valve cover (part # 04893800AI includes valve cover gasket) to ensure proper repair. Please call FCA Redacted Content if further questions or help is needed with parts retention returns on valve cover assemblies

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates

It has been determined that the issue is with the trim carpet the headrest strap goes through, not the headrest mechanism. Please do not replace the headrest/headrest mechanism and instead refer to SOL S2423000025 for the proper rework procedure that should be done"

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."

It has been determined that the issue is with the trim carpet the headrest strap goes through, not the headrest mechanism. Please do not replace the headrest/headrest mechanism and instead refer to SOL S2423000025 for the proper rework procedure that should be done"

Please do not try to open the Switch nor fix it. Just return the part and order a new one.

Please verify proper functionality of both sliding doors (power or manual) switch the door into manual mode. Then, put the door in secondary and see if it will cinch and release through all inputs (overhead console, key fob, handle grab) 2. If sliding doors operate as expected, do NOT replace sliding door latch(es) 3. If possible, please provide any / all information in the repair order narrative regarding status of sliding door function (i.e, door only works manually, won't open via key fob, etc.). This includes all customer feedback as well (what exactly brought the customer into the dealer).

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

Please do not try to open the Switch nor fix it. Just return the part and order a new one.

Please verify proper functionality of both sliding doors (power or manual) switch the door into manual mode. Then, put the door in secondary and see if it will cinch and release through all inputs (overhead console, key fob, handle grab) 2. If sliding doors operate as expected, do NOT replace sliding door latch(es) 3. If possible, please provide any / all information in the repair order narrative regarding status of sliding door function (i.e, door only works manually, won't open via key fob, etc.). This includes all customer feedback as well (what exactly brought the customer into the dealer).

Country/ 2013 - 2020 Dodge Caravan (RT) - Corrosion - Complete Hood Panel Warranty Claim Simplification (Rev. B)

2020 Dodge Caravan (RT) - Corrosion - Complete Hood Panel Warranty Claim Simplification (Rev. B)

Country/ 2013-2020 Dodge Caravan (RT) - Corrosion Complete Hood Panel Warranty Claim Simplification (Rev. A)

Dodge Caravan (RT) - Corrosion Complete Hood Panel Warranty Claim Simplification (Rev. A)

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

Mirror Contacts Door Window Glass In The Folded Position.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

Dodge Caravan (RT) - Corrosion ? Complete Hood Panel Warranty Claim

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

operate, refer to Star Online Publication S2223000021 before replacing the latch.

Blind Spot Indicator On In Mirror For No Reason.

operate, and your Dealership is located in the Detroit Metro area, please contact FCA Redacted Content prior to replacing the liftgate latch. If no response in 15 minutes, refer to Star Online Publication S2223000021 before replacing the latch.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

operate, refer to Star Online Publication S2223000021 before replacing the latch.

please refer to the following steps: 1. Please verify proper functionality of both sliding doors (power or manual) through all inputs (overhead console, key fob, handle grab). 2. If sliding doors operate as expected, do NOT replace sliding door latch(es). 3. If service is required, and your Dealership is located in the Detroit Metro Area please contact FCA Redacted Content, prior to replacing any sliding door latch(es). If no response in 15 minutes, proceed with repair. 4. If possible, please provide any / all information in the repair order narrative regarding status of sliding door function (i.e, door only works manually, won't open via key fob, etc.). This includes all customer feedback as well (what exactly brought the customer into the dealer).

operate, refer to Star Online Publication S2223000021 before replacing the latch.

Customer may experience one or more of the following: Vehicle unlocks only when key fob is located close to the door. User can start vehicle with key fob outside the vehicle near the door.

operate, refer to Star Online Publication S2223000021 before replacing the latch.

If no response in 15 minutes, proceed with repair.

this is normal and not a defect.

If no response in 15 minutes, proceed with repair.

If no response within 15 minutes, proceed with the repair.

C0604- Active Air Dam Control Performance

compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold

semi and full synthetic oils.

If the issuestill exists, call FCA Redacted Content. If no response in 15 minutes, proceed with repair.

compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold

If the issuestill exists, call FCA Redacted Content. If no response in 15 minutes, proceed with repair.

lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*

TPM Lamp On.

TPM Lamp On.

ON'"

Red Wrench Light On, Electric Drive Modes Disabled

Or Can C BUS DTC?s

Or Can C BUS DTC?s

Or Can C BUS DTC?s

Or Can C BUS DTC?s

Customers may experience the following: The steering wheel will not heat up or turn on, when enabled fromthe button on radio screen.

Customers may experience the following:The steering wheel will not heat up or turn on, when enabled fromthe button on radio screen.

Customers may experience the following: The steering wheel will not heat up or turn on, when enabled from the button on radio screen.

Customers may experience the following: The steering wheel will not heat up or turn on, when enabled fromthe button on radio screen.

Customers may experience the following:The steering wheel will not heat up or turn on, when enabled fromthe button on radio screen.

Customers may experience the following: The steering wheel will not heat up or turn on, when enabled from the button on radio screen.

which replacement or repair of steering system components are required.

Customers may experience the following: The steering wheel will not heat up or turn on, when enabled fromthe button on radio screen.

Customers may experience the following:The steering wheel will not heat up or turn on, when enabled fromthe button on radio screen.

Customers may experience the following: The steering wheel will not heat up or turn on, when enabled from the button on radio screen.

Customers may experience the following: The steering wheel will not heat up or turn on, when enabled fromthe button on radio screen.

Customers may experience the following:The steering wheel will not heat up or turn on, when enabled fromthe button on radio screen.

Customers may experience the following: The steering wheel will not heat up or turn on, when enabled from the button on radio screen.

? A/C not blowing cold. This bulletin involves performing an A/C compressor test and possibly replacing the A/C compressor.

customer may describe following: Navigation inoperative. Black or blank radio screen (Rear View Camera (RVC) will still function normally). Radio lockup (RVC will still function normally). No Verbal warnings on navigation. Surround sound inoperative. Blu-ray DVD unavailable. Listen in/Mirror feature inoperative. PHEV radio does not turn off when opening door or after charging Audio Overlap between sources. Radio doesn?t recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. Radio presets are not saving. Audio mute on calls (Phone, SOS and Ecall). Radio resets. Radio screen freezes (RVC will still function normally). Audio disruptions. Wireless connectivity device disconnect. Wireless connectivity disconnecting. Audio distortion (hissing, water sprinkler, or salt shaker noise) (WL Only). The following software enhancements are available:Uconnect Phone improvements. Apple CarPlay and Android Auto improvements. Voice recognition command improvements. Climate control screen improvements (WL Only). SXM radio improvements (WL Only).

Publication S2208000042 for the 2022 RU. There have been many Electric Coolant Heater orders and replacements when the part replacement is unnecessary. The released SOL Publications provide guidance to properly identify if this part actually needs to be replaced.

The customer may experience the following: The USB port on the DVD/Blu-Ray player (Uconnect Theater) is inoperable.

customer may describe following: Navigation inoperative. Black or blank radio screen (Rear View Camera (RVC) will still function normally). Radio lockup (RVC will still function normally). No Verbal warnings on navigation. Surround sound inoperative. Blu-ray DVD unavailable. Listen in/Mirror feature inoperative. PHEV radio does not turn off when opening door or after charging Audio Overlap between sources. Radio doesn?t recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. Radio presets are not saving. Audio mute on calls (Phone, SOS and Ecall). Radio resets. Radio screen freezes (RVC will still function normally). Audio disruptions. Wireless connectivity device disconnect. Wireless connectivity disconnecting. Audio distortion (hissing, water sprinkler, or salt shaker noise) (WL Only). The following software enhancements are available:Uconnect Phone improvements. Apple CarPlay and Android Auto improvements. Voice recognition command improvements. Climate control screen improvements (WL Only). SXM radio improvements (WL Only).

customer may describe following: Navigation inoperative. Black or blank radio screen (Rear View Camera (RVC) will still function normally). Radio lockup (RVC will still function normally). No Verbal warnings on navigation. Surround sound inoperative. Blu-ray DVD unavailable. Listen in/Mirror feature inoperative. PHEV radio does not turn off when opening door or after charging Audio Overlap between sources. Radio doesn?t recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. Radio presets are not saving. Audio mute on calls (Phone, SOS and Ecall). Radio resets. Radio screen freezes (RVC will still function normally). Audio disruptions. Wireless connectivity device disconnect. Wireless connectivity disconnecting. Audio distortion (hissing, water sprinkler, or salt shaker noise) (WL Only). The following software enhancements are available:Uconnect Phone improvements. Apple CarPlay and Android Auto improvements. Voice recognition command improvements. Climate control screen improvements (WL Only). SXM radio improvements (WL Only).

Publication S2208000042 for the 2022 RU. There have been many Electric Coolant Heater orders and replacements when the part replacement is unnecessary. The released SOL Publications provide guidance to properly identify if this part actually needs to be replaced.

customer may describe following:No Verbal warnings on navigation. Surround sound inoperative. Blu-ray DVD unavailable. Listen in/Mirror feature inoperative. PHEV radio does not turn off when opening door or after charging Audio Overlap between sources. Radio doesn?t recognize the vehicle is in park. No keyboard pop up, vehicles setting are hidden. Radio presets are not saving. Audio mute on calls (Phone, SOS and Ecall). Radio resets. Radio screen freezes.The rear view camera display, will work properly if the radio display screen freezes. Audio disruptions. Wireless connectivity device disconnect. Wireless connectivity disconnecting. Audio distortion (hissing, water sprinkler, or salt shaker noise) (WL Only). The following software enhancements are available:Uconnect Phone improvements. Apple CarPlay and Android Auto improvements. Voice recognition command improvements. Climate control screen improvements (WL Only). SXM radio improvements (WL Only).

Publication S2208000042 for the 2022 RU. There have been many Electric Coolant Heater orders and replacements when the part replacement is unnecessary. The released SOL Publications provide guidance to properly identify if this part actually needs to be replaced.

Publication S2208000042 for the 2022 RU. There have been many Electric Coolant Heater orders and replacements when the part replacement is unnecessary. The released SOL Publications provide guidance to properly identify if this part actually needs to be replaced.

B)

A - Panasonic VP4R Wi-Fi New Enrollment Pause was uploaded for this communication during publishing and was corrected with S228A000009 Rev. A

Order a "Z" part number for all Exchange Orders: Warranty, Mopar, Customer pay and Service contract. Order"68" part number for New unsold units only

PRIOR TO PERFORMING ANY THERMOSTAT REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2309000014

Library for specifications so a suitable alternative can be used

immediate service when there is not actually a vehicle issue.

following individual prior to service of the vehicle. FCA Redacted Content If no response in 15 minutes, proceed with repair.

If the Filter is restricted or blocked then replace the part. For customers that drive light duty trucks in extreme dusty and dirty road conditions, please reference information only TSB 25-009-24 for an available MOPAR Dual EVAP Filter kit that is customer paid.

"

"

Please contact FCA REDACTED CONTENT. ~ If no response in 15 minutes, proceed with repair.

Wheel bearing growling noise in front when driving. This bulletin involves possibly replacing the either side front hub bearing(s).

No further parts distribution will be taking place. All distributed parts would cover all sold and unsold needs. Please use all stock that your dealer has before asking for parts assistance. If part assistance is still required, please provide the following information to your Area Manager for review: 1. Dealer Code 2. Last eight digits of VIN 3. Appointment date/vehicle VOR at dealer Thank you, Mopar

illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): P1DB7-00 - Torque Converter Clutch Performance.

Due to brake vacuum pumps returned with trouble not found, please follow the proper diagnostics outline in the service library this also includes checking all electrical and vacuum hose connections prior to replacement of the vacuum pump. This will avoid unnecessary repair and potential charge back on the vacuum pump.

response in 15 minutes, proceed with repair. If there is no visible damage to the original rain sensor it should be transfered to the new windshield using a new gel pad rather than replacing it.

updated diagnostic procedures in the service library which may indicate the smart actuator replacement (PN 68369691AD) is the proper repair.