2005 Chrysler 300 TSBs

An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.

To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik

An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.

To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.

An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.

To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.

All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

If the pins are missing request to add the dowel pin first and then install the transmission

All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

the fuel tank with a revised part. Some customers may experience an engine stall condition just after filling the fuel tank. The integral mulit-functional control valve may allow liquid fuel to enter the evaporative emissions system causing a rich fuel condition when the purge system is initiated..

the fuel tank with a revised part. Some customers may experience an engine stall condition just after filling the fuel tank. The integral mulit-functional control valve may allow liquid fuel to enter the evaporative emissions system causing a rich fuel condition when the purge system is initiated..

If the pins are missing request to add the dowel pin first and then install the transmission

The customer communication requested return of unsold inventory to inspect the hose bending geometry. If the hose is not formed properly, it will interfere with surrounding components and prevent installation.

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik

the fuel tank with a revised part. Some customers may experience an engine stall condition just after filling the fuel tank. The integral mulit-functional control valve may allow liquid fuel to enter the evaporative emissions system causing a rich fuel condition when the purge system is initiated..

Please return stock packaged before 2016/07/31 (31 July, 2016)of follow ing part numbers:68176457AF, 68176459AF. Please return suspect parts back to your facing depot using Return Code 02, before 13 September, 2016.

(M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~

*TT

*TT

*TT

VARIOUS MODELS INCLUDING 2005/2006 DODGE CHARGER. *TT

*SC

*TT

*TT

*TT

THE ENGINE COOLANT MAY HAVE A LOW (WEAK) ANTI-FREEZE CONCENTRATION LEVEL. *TT

*TT

*TT

WARRANTY PLANNING & ADMINISTRATION BULLETIN. *TT

CONTROL MODULE (PCM) THAT RESULTS IN NON-COMPLIANCE. IT WILL BE NECESSARY TO REPLACE THE PCM. *TT

Module U0199 Lost Communication With Drivers Door Module This bulletin involves Inspecting the Drivers Door Module (DDM) and/or Passenger Door Module (PDM) and replacing one of both if necessary. The customer may experience any or all of the following conditions: The drivers and/or passenger front power locks and windows are inoperative. will work properly. The Technician may find Diagnostic trouble code (DTC), U0200 Lost communication with Passenger Door Module. The Technician may find Diagnostic trouble code (DTC), U0199 Lost of communication with Drivers Door Module.

equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.

All Parts / 2005 LX Only ~ If the cooling module isolator bracket screw breaks off in the weld nut while replacing the bracket please refer to the updated CSN. CSN D50 was updated in January 2005 to include steps for removal and replacement of the weld nut with a loose flange nut to expedite the repair procedure. Do not remove and replace the HMC cross-member due to the screw breaking off during the removal process.

The HFM fails to operate causing the UConnect Hands Free Communications system to not respond when system activation is attempted by the customer. Further diagnosis may reveal that when the wiTECH scan tool is used to read Diagnostic Trouble Codes (DTCs) the tool indicates that the module is not responding. Other modules on the bus may display loss of communication with the HFM. If the Hands Free Communication system is unresponsive then the HFM may require electronic reset.To perform a electronic reset, turn off the vehicle and pull the Ignition Off Drain (IOD) fuse. Wait a few minutes before reinstalling the IOD fuse and checking if the HFM is communicating. If the HFM still will not communicate, then normal No Response diagnostic should be performed. If the HFM is working properly, the module should be replaced to prevent this condition from happening again.

Module U0199 Lost Communication With Drivers Door Module This bulletin involves Inspecting the Drivers Door Module (DDM) and/or Passenger Door Module (PDM) and replacing one of both if necessary. The customer may experience any or all of the following conditions: The drivers and/or passenger front power locks and windows are inoperative. will work properly. The Technician may find Diagnostic trouble code (DTC), U0200 Lost communication with Passenger Door Module. The Technician may find Diagnostic trouble code (DTC), U0199 Lost of communication with Drivers Door Module.

have stock in transit to your dealership. Please return part number CBSZR068AA as per the QIR attached. Replacement part can be obtained by ordering the same part number (CBSZR068AA) Please return suspect parts back to your facing depot using Return Code 02, before 02 September, 2016.

Module U0199 Lost Communication With Drivers Door Module This bulletin involves Inspecting the Drivers Door Module (DDM) and/or Passenger Door Module (PDM) and replacing one of both if necessary. The customer may experience any or all of the following conditions: The drivers and/or passenger front power locks and windows are inoperative. will work properly. The Technician may find Diagnostic trouble code (DTC), U0200 Lost communication with Passenger Door Module. The Technician may find Diagnostic trouble code (DTC), U0199 Lost of communication with Drivers Door Module.

*KB

*AK

TO INCLUDE 2006 CHRYSLER TOWN AND COUNTRY AND 300/TOURING. *TT

*EH

*TT

THIS BULLETIN SUPERSEDES BULLETIN 18-009-04 DATED 03/02/2004. *TT

INTERMITTENT LOSS OF THROTTLE CONTROL. REPROGRAM POWERTRAIN CONTROL MODULE (PCM). *TT

*TT

*TT *MJ

*TT

2004 DURANGO. *TT *MJ

awareness regarding the use of aftermarket parts.

structural repair parts usage.

(Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~

awareness regarding the use of aftermarket parts.

structural repair parts usage.

Please return stock of part number CBXDP361AA. Replacement part number is CBXDP361AB w hich is in stock and available for order. Please return suspect parts back to your facing depot using Return Code 02, before 16 September, 2016.

(Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~

05066964A$ = WBRW0011A$ 05066973A$ = WB000019A$ or WBF00019A$ 05096134A$ = WB000027A$ or WBF00028A$ 55154762A$ = WB000013A$ 68001330A$ = WB000019A$ or WBF00019A$ 05012611A$ = WB000021A$ or WBF00021A$ 05102881A$ = WBRW0011A$

*SC

*TT

*EH

THE RADIATOR ISOLATOR BRACKETS MAY CRACK. *TT

*TT

*TT

industry awareness regarding the use of recycled or salvage parts.

industry awareness regarding the use of recycled or salvage parts.

Please return suspect stock of part number 05182535AD . See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.

Please return all stock of follow ing part numbers:55372082AE, 55372082AD, 55372082AC, 55372082AB, 55372082AA. Replacement part number is 55372082AF w hich is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.

*KB

*TT

*TT

*SC

*EH

*MJ THIS BULLETIN SUPERSEDES BULLETIN 18-031-04, DATED JULY 8, 2004. *TT

Please return suspect stock of follow ing part numbers:52120000AA, 52119435AF, 05078709AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.

SHIFT SPRING BREAKS CAUSING THE SHIFT LEVER TO BE UNABLE TO SHIFT FROM THE 'PARK' POSITION. *RM

TO INCLUDE 2005 DODGE CHARGER SRT-8. *TT

*TT

*EH

*TT

*MJ

WARRANTY PLANNING & ADMINISTRATION BULLETIN. *TT

*TT THIS BULLETIN SUPERSEDES BULLETIN 21-006-04 DATED APRIL 27, 2004. *TT

VARIOUS MODELS INCLUDING THE 2004 RAM TRUCK, DURANGO, SEBRING CONVERTIBLE, CHEROKEE, VISION, NEON, AND VOYAGER. *TT *SC

Please return suspect stock of part numbers: 1ZA04DX9AE, 1ZA05DX9AE. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.

stock in transit to your dealership. Please return suspect stock of part number 1N T30XDVAC. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.

TO BE REPLACE, IF NECESSARY, EVEN THOUGH REAR WINDOWS OPERATE CORRECTLY. MODEL 2005-2010 300, CHARGER. *PE

*SC

*TT

*TT

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~Before 3rd quarter -2017. For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option.

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~Before 3rd quarter -2017. For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option.

The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~ For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option."

CUSTOMER SATISFACTION NOTIFICATION D36. *TT

AN INCORRECT VEHICLE EMISSION CONTROL INFORMATION (VECI) LABEL WAS INADVERTENTLY INSTALLED. *TT

*TT

*AK

The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.

The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.

*TT THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-031-04 DATED 09/08/04. *TT

*SC

*SC

*TT

*SC

*TT

*TT

2005-2006 CHRYSLER 300/CHARGER/MAGNUM. *SC

SINCE A FULL SIZE SPARE TIRE IS NOT AN AVAILABLE OPTION, ALL INVOLVED VEHICLES ARE EQUIPPED WITH A COMPACT SPARE TIRE. CUSTOMER SATISFACTION NOTIFICATION 27. *TT

COMPACT SPARE WHEEL. THE WHEEL FOR THE COMPACT SPARE MAY CONTACT THE FRONT SUSPENSION LOWER CONTROL ARM BALL JOINT STUD DURING CERTAIN VEHICLE MANEUVERS. *TT

*TT

*KB

*TT