2015 Chrysler 200 TSBs

pressure low indicator lamp illumination between oil changes. Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block."

For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

pressure low indicator lamp illumination between oil changes. ? Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block.

For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

pressure low indicator lamp illumination between oil changes. Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block.

2015 - 2018 Jeep Renegade (FWD/AWD) (BU), 2013 - 2016 Dodge Dart (PF), 2015 - 2017 Chrysler 200 (UF), 2016 - 2018 Fiat 500X (FWD) (FB), (AWD), 2015 - 2018 Ram Promaster City (VM)

installed in the vehicle.

A customers may experience one or more of the following: Rearview Camera image appears jittery. Inability to establish a WiFi connection when security feature is enabled. Audio distortion/popping heard while playing Apple devices through the USB port. Navigation system improvements. Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running. using VR.

oil between oil change intervals and no visible signs of oil leaking from the engine. This bulletin involves performing an oil consumption verification test.

The customer may comment that the vehicles engine oil level is low or they need to add oil between oil change intervals and no visible signs of oil leaking from the engine.

The dealer is unable to obtain the proper key code for the vehicle.

MultiAir Unit, please note that there are multiple causes listed for each in the diagnostic procedure. This procedure must be followed to ensure the correct condition is being addressed. ~ Please verify the following (as listed in the first step in diagnostics) is not present before attempting repair:~ - Low Engine Oil - Incorrect oil filter that does not meet OEM specifications - Oil Dirty or Deteriorated (Lack of scheduled oil changes) - Incorrect Oil Viscosity/Weight - Engine Oil Contaminated (i.e. coolant and/or fuel) - Clogged Oil Galley Screen/Filter (top of block - feeds Multi-Air Unit) If there are any questions please contact: Seth Nankee at cell: (248) 303-5434 seth.nankee@fcagroup.com If no response within 15 minutes, please continue with diagnostics/repair.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - EVAP System Small Leak. P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) **P1066 - Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P1068 - Cylinder 2 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106C - Cylinder 4 Oil Supply Solenoid Valve Switch Off Time Out Of Range.** U0401 - Implausible Data Received From ECM/PCM - Signal Invalid. P1185 - General Pressure Sensor Correlation. P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) **P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak.** P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0116 - Engine Coolant Temperature Sensor 1 Performance. P050B - Cold Start Ignition Timing Performance. P061A - Level 2 Torque Performance. P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). In addition to the DTCs above the following improvements have been made: Low Idle Speed After Cold Start between -10C to 0C (14F to 32F).

If cylinder head is replaced on a vehicle more than 1 time for any reason, please call any of the following people.~ First: Ron Dallison ? Cell (248) 292-9510 Ron.dallison@fcagroup.com ~ Second: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com~ If a response is not received within 15 mins, then proceed with the necessary repair.~

compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold For concerns of V8 oil filter leaks on 22MY and up vehicles: 1. Clean the area and use oil dye to know the exact location of the leak with black/UV light. 2. Removal torque (force needed to loosen the filter) 3. If the source of the leak cannot be identified, please contact FCA Redacted Content to FasTrak parts back for analysis. If no response in 15 minutes, proceed with repair and email pictures of the following: A) Oil filter from the bottom to know if it has a "Factory Installed" filter. B) Leak. C) Damage in filter (if any) D) Gasket. E) Block or Oil Filter Adapter(OFA) or Engine Oil Cooler(EOC) sealing surface.

engines, please note that there is a new diagnostic procedure available in DealerCONNECT for P-codes in relationship to cam phasers. Please use this new information for trouble shooting of cam phasers and oil control valves for MIL on issues.

Engine only: Oil leaking from the valve cover onto the O2 sensor causing faults codes P0140, P2096, P0137, P0157. Need to verify the leak source and cause (gasket pinched, out of position, rolled, or cut). Please call one of the individuals below before proceeding with the repair. Also, if possible take a picture and send it to the emails listed below. First: Scott Knaggs - Cell (313) 363-6937 scott.knaggs@facgroup.com Second: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com If no response in 15 minutes, proceed with repair.

contact FCA engineering if ANY of the following Diagnostic trouble codes are Stored or Active in the ORC module: DTC: B223D-00 - OCM DTC Present DTC: B0050-13 - Driver Seatbelt Sensor-Circuit Open DTC: B0052-13 - Passenger Seatbelt Sensor-Circuit Open DTC: B00B5-13 - Driver Seat Track Position Restraints Sensor-Circuit Open DTC: B00C5-13 - Passenger Seat Track Position Restraints Sensor-Circuit Open DTC: B0028-13 - Right Side Seat Deployment Squib 1-Circuit Open DTC: B0020-13 - Left Side Seat Deployment Squib 1-Circuit Open Execute DealerCONNECT / TechCONNECT Diagnostic Procedures to assess potential defects to devices connected to the ORC Module depending on the active or stored Diagnostic Trouble Code. If no defects are detected, verify wiring connectivity between the ORC Module and the component associated with the Diagnostic Trouble Code. Investigate connector pins and wire harness terminals for bent,corroded,or spread conditions. If no response within 15 minutes, proceed with repair. FCA Engineering Contacts: Jay Nagle (ORC Module, Driver/passenger seat track position sensor, OCM for PF, KL or UF Vehicles ONLY) @ cell (248) 576-5657

The customer may describe a slight noise coming from the engine compartment at the purge control valve area on the engine.

(OFA) due to a leak detected between OFA and block. Ensure the torque on the 5 (OFA) bolts are torqued to 12nm.

The customer may comment that the vehicles engine oil level is low or they need to add oil between oil change intervals and no visible signs of oil leaking from the engine.

installed in the vehicle.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles, built on or before October 21, 2014 (MDH 1021XX). ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. 2015 PF Vehicles, built on or before January 08, 2015 (MDH 0108XX). ? Improve cabin warm up in cold weather, when the vehicle is in park or neutral and the temperature is between 10F to 40F (-12C to 4.5C). ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. 2013-2014 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2251 - O2 Sensor 1/1 Negative Current Control Circuit Open. ? P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module.

All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

A customers may experience one or more of the following: Rearview Camera image appears jittery. Inability to establish a WiFi connection when security feature is enabled. Audio distortion/popping heard while playing Apple devices through the USB port. Navigation system improvements. Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running. The Radio may switch from SiriusXM to an AM station by itself. Uconnect registration always present, can not remove Uconnect account. Teleprompter does not appear when pressing the Voice Recognition (VR) button. VR operation cancels while in media mode. Radio may display previous cameras image before displaying the current image. Navigation lost vehicle position, during route calculation. Navigation displays are missing after vehicle heading changes. Navigation giving incorrect guidance to exit the highway. FM audio may switch to AM after ignition cycle. Text messages appear as sender?s phone number not their name. VR phone button may not work at times. Audio muted after AUX device is disconnected. VR, ? Listen? to text, will only play 1st message. SirusXM station information does not update. Speed adjusted volume, may not work. AM or FM seek or tuner soft keys may be missing. Display screen show ambient temperature as ?- - ? not normal values.Improvements: High Definition (HD) radio buffering. Spanish translation. Making assist calls. App functionality and screen displays. Displays correct media, song titles and tracks. Travel Link, Points Of Interest (POI), displaying movies and favorites. Audio for strong AM stations. VR performance. Settings can only be changed in run mode, not ACC. Notify user when messaging features are not supported on certain phones/devices. Shows direction and distance for POI when using VR.

Transmission Control Module (TCM) with new software. The following Transmission Control Module (TCM) calibration improvements are available for (KL) Jeep Cherokee. Both engines ((EHB) 3.2L V6 24V VVT and (ED6) 2.4L I4 Multi Air) ? P1DB8 Unintended Torque Applied while in Neutral (set due to erroneous DTC) ? P1DCF TCM Monitoring Processor Performance - Unallowed Park Engagement due to ABS Failure (set due to erroneous DTC). ? P1DD0 TCM Monitoring Processor Performance - Unallowed Park Engagement (set due to erroneous DTC). 2.4L KL (ED6) only ? Shift comfort complaint on 1-2 and 2-3 upshifts when lifting foot off throttle ? P1DCF TCM Monitoring Processor Performance - Unallowed Park Engagement due to ABS Failure (set due to erroneous DTC). ? P1DD0 TCM Monitoring Processor Performance - Unallowed Park Engagement (set due to erroneous DTC). ? Busy shifting from transmission on grades ? Shift busyness at 75 MPH with 7-8 and 8-7 shifts ? Shift comfort complaint on 3-2 and 2-1 coasting downshifts in Sport mode 3.2L KL (EHB) only ? Shift comfort complaints during ESS auto-start and launch The following Transmission Control Module (TCM) calibration improvements are available for (UF) 200. ? P1DB8 Unintended Torque Applied while in Neutral set due to erroneous DTC ? Slow to downshift. Fixed by making 9-7, 7-4, and 6-4 downshifts more available ? Poor shift quality on 1-2 and 2-3 lift-foot upshifts ? Poor shift quality on 4-3 downshift while coasting ? Poor shift quality on 4-3, 3-2, and 2-1 coasting downshifts in Sport mode

bulletin involves inspecting and, if required, updating the radio software. A customer may arrive at the dealership with the following concerns: ? Rearview Camera image appears jittery. ? Inability to establish a WiFi connection when security feature is enabled. ? Audio distortion/popping heard while playing Apple devices through the USB port.. ? Navigation system improvements. ? Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running.

Family built without an engine cover. Please do not order this part as a shortage and error on this model. Cover may be installed with customer pay.

MultiAir Unit, please note that there are multiple causes listed for each in the diagnostic procedure. This procedure must be followed to ensure the correct condition is being addressed. ~ Please verify the following (as listed in the first step in diagnostics) is not present before attempting repair:~ - Low Engine Oil - Incorrect oil filter that does not meet OEM specifications - Oil Dirty or Deteriorated (Lack of scheduled oil changes) - Incorrect Oil Viscosity/Weight - Engine Oil Contaminated (i.e. coolant and/or fuel) - Clogged Oil Galley Screen/Filter (top of block - feeds Multi-Air Unit) If there are any questions please contact: Seth Nankee at cell: (248) 303-5434 seth.nankee@fcagroup.com If no response within 15 minutes, please continue with diagnostics/repair.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - EVAP System Small Leak. P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) **P1066 - Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P1068 - Cylinder 2 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106C - Cylinder 4 Oil Supply Solenoid Valve Switch Off Time Out Of Range.** U0401 - Implausible Data Received From ECM/PCM - Signal Invalid. P1185 - General Pressure Sensor Correlation. P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module.

A small number of customers may experience one or more of the following: ? **?Navigation Failed? message is displayed. ? Navigation is inoperative or inaccurate. ? CD player will not play songs and/or locks up the radio. ? The clock will not automatically update to local time. ? The clock may be off by several hours (RA3 only). ? HVAC temperature out of sync with radio display (KL vehicles). ? Some Uconnect App remote commands do not execute with the vehicle. ? Radio Apps are inoperative. ? Radio will lock up. Radio display screen is black or blank. Battery drain due to radio staying on.** Rearview Camera image appears jittery (UF vehicles only). Inability to establish a WiFi connection when security feature is enabled (UF vehicles only). Audio distortion/popping heard while playing Apple devices through the USB port (UF vehicles only). Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running (UF vehicles only). HVAC temperature out of sync with radio display (KL vehicles). Intermittently blind spot chime will not turn off (KL vehicles only). The radio may switch from SiriusXMT to an AM station by itself. Uconnect registration always present, can not remove Uconnect account. Audio muted after AUX device is disconnected. In addition, the following Improvements are included: **Adds Apple SiriT Eyes Free capability for iPhoneT owners. Add the ability to drag and drop icons into the menu bar. Auto Play can now be configured. Enhanced VR performance. Media devices, phone pairing and Bluetooth usage improvements. Improved tuner performance. Enhancements in Connectivity Apps (YelpT, PandoraT, AhaT, etc). Human Machine Interface (HMI) improvements. Adds ?do not disturb? text message feature.**

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - EVAP System Small Leak. P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) **U0401 - Implausible Data Received From ECM/PCM - Signal Invalid. P1185 - General Pressure Sensor Correlation.** P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0116 - Engine Coolant Temperature Sensor 1 Performance. P050B - Cold Start Ignition Timing Performance. P061A - Level 2 Torque Performance. P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). In addition to the DTCs above the following improvements have been made:

Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~

The following powertrain system improvements/enhancements are included in this software release: **P0335 - Crankshaft Position Sensor Circuit.** P0480 Cooling Fan 1 Control Circuit/open. P0456 EVAP System Small Leak. U0402 Implausible Data Received From TCM. P0441 EVAP Purge System Performance. P0116 Engine Coolant Temperature Sensor Performance. Other enhancements included in this update: **Elimination of (disable) Low idle 550 RPM to mitigate rough idle complaints (Base idle fully warm maintained at 648 RPM).** New software to address customer?s concern of extended crank times when starting engine. Software to enable the clearing of erroneous DTC U0140 Loss of communication with the Body Control Module (BCM). New software to enable the ?Transmission Quick Learn? feature.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - EVAP System Small Leak. P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) U0401 - Implausible Data Received From ECM/PCM - Signal Invalid. P1185 - General Pressure Sensor Correlation. P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0116 - Engine Coolant Temperature Sensor 1 Performance. P050B - Cold Start Ignition Timing Performance. P061A - Level 2 Torque Performance. P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). Low Idle Speed After Cold Start between -10C to 0C (14F to 32F). Cold Idle Surge With AC Engaged

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - EVAP System Small Leak. P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) **U0401 - Implausible Data Received From ECM/PCM - Signal Invalid. P1185 - General Pressure Sensor Correlation.** P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0116 - Engine Coolant Temperature Sensor 1 Performance. P050B - Cold Start Ignition Timing Performance. P061A - Level 2 Torque Performance. P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation).

Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~

reprogramming the Powertrain Control Module (PCM) with new software. The following powertrain system improvements/enhancements are included in this software release. New software to address customer?s concern of extended crank times when starting engine. Software to enable the clearing of erroneous DTC U0140 - Loss of communication with the Body Control Module (BCM). New software to enable the transmission quick learn feature.

reprogramming the Powertrain Control Module (PCM) with new software. Some customers may comment the vehicle takes an abnormal amount of time to start or that the engine crank time is longer than expected. This software corrects this concern as well as enables the transmission quick learn feature.

contact FCA engineering if the following Diagnostic trouble codes are Stored or Active in the ORC module:~ DTC: B223D-00 - OCM DTC Present~ DTC: B0050-13 - Driver Seatbelt Sensor-Circuit Open~ DTC: B0052-13 - Passenger Seatbelt Sensor-Circuit Open~ DTC: B00B5-13 - Driver Seat Track Position Restraints Sensor-Circuit Open~ DTC: B00C5-13 - Passenger Seat Track Position Restraints Sensor-Circuit Open~ DTC: B0028-13 - Right Side Seat Deployment Squib 1-Circuit Open~ DTC: B0020-13 - Left Side Seat Deployment Squib 1-Circuit Open~ Execute DealerCONNECT / TechCONNECT Diagnostic Procedures to assess potential defects to devices connected to the ORC Module depending on the active or stored Diagnostic Trouble Code. If no defects are detected, verify wiring connectivity between the ORC Module and the component associated with the Diagnostic Trouble Code. Investigate connector pins and wire harness terminals for bent,corroded,or spread conditions. If no response within 15 minutes, proceed with repair.~ FCA Engineering Contacts:~ Jay Nagle (ORC Module, OCM module, Driver/passenger seat track position sensor for PF, KL or UF Vehicles ONLY) @ cell (248) 420-4294 or jay.nagle@external.fcagroup.com~ Bill Winfrey (Driver/Passenger Buckle Switch, Passenger/Driver Seat Thorax Airbags) @ cell (248) 941-9221 or william.winfrey@fcagroup.com

(PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs set in the PCM memory: U1504 - Implausible Message Data Length Received From Steering Angle Sensor. P0128 - Thermostat Rationality. P0335 - Crankshaft Position Sensor Circuit. P0340 - Camshaft Position Sensor Circuit Bank 1 Sensor 1. U1424-00 - Implausible Engine Torque Signal Received. P1066 - Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P1068 - Cylinder 2 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106C - Cylinder 4 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - EVAP System Small Leak. P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance.In addition to the DTCs above the following improvements have been made: Min spark changes to prevent catalytic converter overheating. Engine Startup Flare and Idle Surge. P1066 - Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P1068 - Cylinder 2 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106C - Cylinder 4 Oil Supply Solenoid Valve Switch Off Time Out Of Range. U0401 - Implausible Data Received From ECM/PCM - Signal Invalid.

See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8). ? Improved vehicle acceleration. ? P0480 - Cooling Fan 1 Control Circuit/Open. ? P0456 - Evap System Small Leak. ? U0402 - Implausible Data Received From TCM. ? Engine Startup Flare and Idle Surge. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0441 - Evap Purge System Performance. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050D - Cold Start Rough Idle. 2015 PF Vehicles with (Sales Codes ED6, ED8), built on or before July 24, 2015 (MDH 0724XX). ? Low Idle Speed After Cold Start between 14F to 32F (-10C to 0C). ? Cold Idle Surge With AC Engaged. ? Improve cabin warm up in cold weather, when the vehicle is in park or neutral and the temperature is between 10F to 40F (-12C to 4.5C). ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050B - Cold Start Ignition Timing Performance. ? P050D - Cold Start Rough Idle. ? P061A - Level 2 Torque Performance. ? P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). 2013-2014 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2251 - O2 Sensor 1/1 Negative Current Control Circuit Open. ? P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. ? P2172 - High Airflow/Vacuum Leak Detec

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8). ? Improved vehicle acceleration. ? P0480 - Cooling Fan 1 Control Circuit/Open. ? P0456 - Evap System Small Leak. ? U0402 - Implausible Data Received From TCM. ? Engine Startup Flare and Idle Surge. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0441 - Evap Purge System Performance. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050D - Cold Start Rough Idle. 2015 PF Vehicles with (Sales Codes ED6, ED8), built on or before July 24, 2015 (MDH 0724XX). ? Low Idle Speed After Cold Start between 14F to 32F (-10C to 0C). ? Cold Idle Surge With AC Engaged. ? Improve cabin warm up in cold weather, when the vehicle is in park or neutral and the temperature is between 10F to 40F (-12C to 4.5C). ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050B - Cold Start Ignition Timing Performance. ? P050D - Cold Start Rough Idle. ? P061A - Level 2 Torque Performance. ? P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). 2013-2014 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2251 - O2 Sensor 1/1 Negative Current Control Circuit Open. ? P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. ? P2172 - High Airflow/Vacuum Leak Detec

with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor. 5) When replacing PN's 68310865A$ & 68308741A$, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) **P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak.** P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0116 - Engine Coolant Temperature Sensor 1 Performance. P050B - Cold Start Ignition Timing Performance. P061A - Level 2 Torque Performance. P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation).

The customer may comment that the vehicles engine oil level is low or they need to add oil between oil change intervals and no visible signs of oil leaking from the engine.

The customer may comment that the vehicles engine oil level is low or they need to add oil between oil change intervals and no visible signs of oil leaking from the engine.

The customer may comment that the vehicles engine oil level is low or they need to add oil between oil change intervals and no visible signs of oil leaking from the engine.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P0300 - Multiple Cylinder Misfire P0301 - Cylinder 1 Misfire. P0302 - Cylinder 2 Misfire. P0303 - Cylinder 3 Misfire. P0304 - Cylinder 4 Misfire. Some customers may also experience the following condition:Rough running engine.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find thatone or more of the following Diagnostic Trouble Codes (DTCs) have been set:P0300 - Multiple Cylinder Misfire P0301 - Cylinder 1 Misfire. P0302 - Cylinder 2 Misfire. P0303 - Cylinder 3 Misfire. P0304 - Cylinder 4 Misfire. Some customers may also experience the following condition:Rough running engine.

Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find thatone or more of the following Diagnostic Trouble Codes (DTCs) have been set:P0300 - Multiple Cylinder Misfire P0301 - Cylinder 1 Misfire. P0302 - Cylinder 2 Misfire. P0303 - Cylinder 3 Misfire. P0304 - Cylinder 4 Misfire. Some customers may also experience the following condition:Rough running engine.

This will allow service technicians to repair the root cause without over repairing the system. Replace only the part deemed failed by the diagnostics performed. Individual parts include: - Compressor - Valve block - Individual hoses - Temp sensor - Shield - Air line clips NOTE: in most situations when a new compressor is needed, the compressor as a separate part is the correct repair, and the assembly would not be required.

Rear Driveline Module (RDM) and Drivetrain Control Module (DTCM). A customer with a KL vehicle may experience difficulty shifting out of 4 Wheel Low (4WL). A customer with a UF vehicle may experience All Wheel Drive (AWD) not operating correctly. On further inspection the Technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? C1494-92-PTU Fork Position - Performance or Incorrect Operation. ? C1499-92-RDM Motor Position - Performance or Incorrect Operation. ? C1496-92-PTU Motor Position - Performance or Incorrect Operation.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) ? Improved vehicle acceleration. ? P0480 - Cooling Fan 1 Control Circuit/Open. ? P0456 - Evap System Small Leak. ? U0402 - Implausible Data Received From TCM. ? Engine Startup Flare and Idle Surge. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0441 - Evap Purge System Performance. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050D - Cold Start Rough Idle. 2015 PF Vehicles with (Sales Codes ED6, ED8) ? P0133 - O2 Sensor 1/1 Slow Response. ? P0456 - Evap System Small Leak. ? Low Idle Speed After Cold Start between 14F to 32F (-10C to 0C). ? Cold Idle Surge With AC Engaged. ? Improve cabin warm up in cold weather, when the vehicle is in park or neutral and the temperature is between 10F to 40F (-12C to 4.5C). ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050B - Cold Start Ignition Timing Performance. ? P050D - Cold Start Rough Idle. ? P061A - Level 2 Torque Performance. ? P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). 2013-2014 PF Vehicles (Sales Codes ED6)

The following powertrain system improvements/enhancements are included in this software release: ? P0480 Cooling Fan 1 Control Circuit/open. ? P0456 EVAP System Small Leak. ? U0402 Implausible Data Received From TCM. ? P0441 EVAP Purge System Performance. ? P0116 Engine Coolant Temperature Sensor Performance. ? New software to address customer?s concern of extended crank times when starting engine. ? Software to enable the clearing of erroneous DTC U0140 Loss of communication with the Body Control Module (BCM). ? New software to enable the ?Transmission Quick Learn? feature.

information regarding this part.~ Bob Smith ? Cell (248) 202-9458 - Robert.M.Smith@fcagroup.com~ If a response is not received within 15 mins, then proceed with the necessary repair.~

Before replacing any of the part numbers listed above, please call any of the following people for each vehicle type. (If you don't get an answer within 15 minutes, then proceed with the repair.):~ WD/WK--68224166AB - Front Ken Deneau, cell (248) 765-0288~ 68089094AA - Rear Pat Presti- cell (248) 379-0972~ KL/UF/PF- 68223053AB, 68225055AA Mark Ware, cell (248) 705-3469~ F500- 68093422AB,Matt Sasina, cell (248) 464-4982 or Bryan Bremer cell (248) 429-9014~ RT- 68029719AB - Front, Chad Holcomb at cell (734)-634-3679 05183147AA - Rear, Ken Deneau, cell (248) 765-0288

occurring:~ 1) Vent switch does not work.~ 2) Open switch only moves the sunroof an inch no matter how long the switch is held.~ 3) When the close switch is used, sunroof closes but then goes into vent.~ The sunroof motor does not need to be replaced, but only reinitialized. Please follow reinitialization procedure available in TechCONNECT.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8). ? Improved vehicle acceleration. ? P0480 - Cooling Fan 1 Control Circuit/Open. ? P0456 - Evap System Small Leak. ? U0402 - Implausible Data Received From TCM. ? Engine Startup Flare and Idle Surge. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0441 - Evap Purge System Performance. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050D - Cold Start Rough Idle. 2015 PF Vehicles with (Sales Codes ED6, ED8), built on or before July 24, 2015 (MDH 0724XX). ? Low Idle Speed After Cold Start between 14F to 32F (-10C to 0C). ? Cold Idle Surge With AC Engaged. ? Improve cabin warm up in cold weather, when the vehicle is in park or neutral and the temperature is between 10F to 40F (-12C to 4.5C). ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050B - Cold Start Ignition Timing Performance. ? P050D - Cold Start Rough Idle. ? P061A - Level 2 Torque Performance. ? P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). 2013-2014 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2251 - O2 Sensor 1/1 Negative Current Control Circuit Open. ? P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. ? P2172 - High Airflow/Vacuum Leak Detec

the transmission to the engine.

A customers may experience one or more of the following: ? Enable High Definition (HD) feature, (RA4 radios located in Canada and Mexico). ? Keyboard improvements, in the Points Of Interest (POI) section. ? Rearview Camera image appears jittery. ? Inability to establish a WiFi connection when security feature is enabled. ? Audio distortion/popping heard while playing Apple devices through the USB port. ? Navigation system improvements. ? Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running. ? The Radio may switch from SiriusXM to an AM station by itself. ? Uconnect registration always present, can not remove Uconnect account. ? Teleprompter does not appear when pressing the Voice Recognition (VR) button. ? VR operation cancels while in media mode. ? Radio may display previous cameras image before displaying the current image. ? Navigation lost vehicle position, during route calculation. ? Navigation displays are missing after vehicle heading changes. ? Navigation giving incorrect guidance to exit the highway. ? FM audio may switch to AM after ignition cycle. ? Text messages appear as sender?s phone number not their name. ? VR phone button may not work at times. ? Audio muted after AUX device is disconnected. ? VR, ? Listen? to text, will only play 1st message. ? SirusXM station information does not update. ? Speed adjusted volume, may not work. ? AM or FM seek or tuner soft keys may be missing. ? Display screen show ambient temperature as ?- - ? not normal values. Improvements: ? High Definition (HD) radio buffering. ? Spanish translation. ? Radio station, scroll feature. ? Making assist calls. ? App functionality and screen displays. ? Displays correct media, song titles and tracks. ? Travel Link, Points Of Interest (POI), displaying movie

Power Transfer Unit (PTU), Rear Driveline Module (RDM) and Drivetrain Control Module (DTCM). A customer with a KL vehicle may experience difficulty shifting out of 4 Wheel Low (4WL). A customer with a UF vehicle may experience All Wheel Drive (AWD) not operating correctly. On further inspection the Technician my find Diagnostic Trouble Codes (DTCs): ? C1499-92-RDM Motor Position - Performance or Incorrect Operation. ? C1496-92-PTU Motor Position - Performance or Incorrect Operation.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. In addition, some customers may describe engine flare at startup or idle surge. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (sales codes ED6, ED8), built on or before June 16th, 2015 (MDH 0615XX). ? U0402 - Implausible Data Received From TCM (ED6, ED8). ? Engine Startup Flare and Idle Surge (ED6, ED8). ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0441 - Evap Purge System Performance (sales codes ED6, ED8). ? P0116 - Engine Coolant Temperature Sensor 1 Performance (sales codes ED6, ED8). ? P050D - Cold Start Rough Idle (sales codes ED6, ED8). 2015 PF Vehicles with (sales codes ED6, ED8), built on or before April 2nd, 2015 (MDH 0402XX). ? Improve cabin warm up in cold weather, when the vehicle is in park or neutral and the temperature is between 10F to 40F (-12C to 4.5C). ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0116 - Engine Coolant Temperature Sensor 1 Performance (sales codes ED6, ED8). ? P050B - Cold Start Ignition Timing Performance (sales codes ED6, ED8). ? P050D - Cold Start Rough Idle (sales codes ED6, ED8). ? P061A - Level 2 Torque Performance (sales codes ED6, ED8). ? P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation) (sales codes ED6, ED8). 2013-2014 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2251 - O2 Sensor 1/1 Negative Current Control Circuit Open. ? P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off T

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (sales codes ED6 or ED8), built on or before April 6, 2015 (MDH 0406XX). ? Improve cold engine idle, reduce idle flare up (ED6 only). ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0441 - Evap Purge System Performance. ? P0116 - Engine Coolant Temperature Sensor 1 Performance . ? P050D - Cold Start Rough Idle. 2015 PF Vehicles with (sales codes ED6, ED8), built on or before April 2, 2015 (MDH 0402XX). ? Improve cabin warm up in cold weather, when the vehicle is in park or neutral and the temperature is between 10F to 40F (-12C to 4.5C). ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050B - Cold Start Ignition Timing Performance. ? P050D - Cold Start Rough Idle. ? P061A - Level 2 Torque Performance. ? P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). 2013-2014 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2251 - O2 Sensor 1/1 Negative Current Control Circuit Open. ? P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module.

A customers may experience one or more of the following: ? Rearview Camera image appears jittery. ? Inability to establish a WiFi connection when security feature is enabled. ? Audio distortion/popping heard while playing Apple devices through the USB port. ? Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running. ? The Radio may switch from SiriusXM to an AM station by itself. ? Uconnect registration always present, can not remove Uconnect account. ? Teleprompter does not appear when pressing the Voice Recognition (VR) button. ? VR operation cancels while in media mode. ? Radio may display previous cameras image before displaying the current image. ? Navigation lost vehicle position, during route calculation. ? Navigation displays are missing after vehicle heading changes. ? Navigation giving incorrect guidance to exit the highway. ? FM audio may switch to AM after ignition cycle. ? Text messages appear as sender?s phone number not their name. ? VR phone button may not work at times. ? Audio muted after AUX device is disconnected. ? VR, ? Listen? to text, will only play 1st message. ? SirusXM station information does not update. ? Speed adjusted volume, may not work. ? AM or FM seek or tuner soft keys may be missing. ? Display screen show ambient temperature as ?- - ? not normal values. Improvements: ? Improved Radio security protection to reduce the potential risk of unauthorized and unlawful access to vehicle systems (US market only). ? Faster response time when using the Remote Service App (US market only). ? Faster connection time with 911 (US market only). ? Navigation system improvements. ? Enable High Definition (HD) feature, (RA4 radios located in Canada and Mexico). ? Keyboard improvements, in the Points Of Interest (POI) section. ? High D

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8), built on or before June 16, 2015 (MDH 0616XX). ? U0402 - Implausible Data Received From TCM. ? Engine Startup Flare and Idle Surge. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0441 - Evap Purge System Performance. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050D - Cold Start Rough Idle. 2015 PF Vehicles with (Sales Codes ED6, ED8), built on or before July 24, 2015 (MDH 0724XX). ? Low Idle Speed After Cold Start between 14F to 32F (-10C to 0C). ? Cold Idle Surge With AC Engaged. ? Improve cabin warm up in cold weather, when the vehicle is in park or neutral and the temperature is between 10F to 40F (-12C to 4.5C). ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. ? P0116 - Engine Coolant Temperature Sensor 1 Performance. ? P050B - Cold Start Ignition Timing Performance. ? P050D - Cold Start Rough Idle. ? P061A - Level 2 Torque Performance. ? P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). 2013-2014 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2251 - O2 Sensor 1/1 Negative Current Control Circuit Open. ? P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Bod

reprogramming the Powertrain Control Module (PCM) with new software. The following powertrain system improvements/enhancements are included in this software release: ? P0441 EVAP Purge System Performance. ? P0116 Engine Coolant Temperature Sensor Performance. ? New software to address customer?s concern of extended crank times when starting engine. ? Software to enable the clearing of erroneous DTC U0140 - Loss of communication with the Body Control Module (BCM). ? New software to enable the transmission quick learn feature.

A customers may experience one or more of the following: ? Rearview Camera image appears jittery. ? Inability to establish a WiFi connection when security feature is enabled. ? Audio distortion/popping heard while playing Apple devices through the USB port. ? Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running. ? The Radio may switch from SiriusXM to an AM station by itself. ? Uconnect registration always present, can not remove Uconnect account. ? Teleprompter does not appear when pressing the Voice Recognition (VR) button. ? VR operation cancels while in media mode. ? Radio may display previous cameras image before displaying the current image. ? Navigation lost vehicle position, during route calculation. ? Navigation displays are missing after vehicle heading changes. ? Navigation giving incorrect guidance to exit the highway. ? FM audio may switch to AM after ignition cycle. ? Text messages appear as sender?s phone number not their name. ? VR phone button may not work at times. ? Audio muted after AUX device is disconnected. ? VR, ? Listen? to text, will only play 1st message. ? SirusXM station information does not update. ? Speed adjusted volume, may not work. ? AM or FM seek or tuner soft keys may be missing. ? Display screen show ambient temperature as ?- - ? not normal values. Improvements: ? Faster response time when using the Remote Service App (US market only). ? Faster connection time with 911 (US market only). ? Navigation system improvements. ? Enable High Definition (HD) feature, (RA4 radios located in Canada and Mexico). ? Keyboard improvements, in the Points Of Interest (POI) section. ? High Definition (HD) radio buffering. ? Spanish translation. ? Radio station, scroll feature. ? Making assist calls. ? App functionality an

The dealer is unable to obtain the proper key code for the vehicle.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. 2015 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. 2013-2014 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2251 - O2 Sensor 1/1 Negative Current Control Circuit Open. ? P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. 2015 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. 2013-2014 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2251 - O2 Sensor 1/1 Negative Current Control Circuit Open. ? P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles, built on or before October 21, 2014 (MDH 1021XX). ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. 2015 PF Vehicles, built on or before January 08, 2015 (MDH 0108XX). ? Improve cabin warm up in cold weather, when the vehicle is in park or neutral and the temperature is between 10F to 40F (-12C to 4.5C). ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module. 2013-2014 PF Vehicles. ? P219A - Bank 1 Air-Fuel Ratio Imbalance. ? P2251 - O2 Sensor 1/1 Negative Current Control Circuit Open. ? P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. ? P2172 - High Airflow/Vacuum Leak Detected. ? P1D73 - AGS Performance. ? U0140 - Lost Communication With Body Control Module.

Power Transfer Unit (PTU), Rear Driveline Module (RDM) and Drivetrain Control Module (DTCM). A customer with a (KL) vehicle may experience difficulty shifting out of 4 Wheel Low (4WL). A customer with a (UF) vehicle may experience All Wheel Drive (AWD) not operating correctly. On further inspection the Technician my find Diagnostic Trouble Codes (DTCs): ? C1499-92-RDM Motor Position - Performance or Incorrect Operation. ? C1496-92-PTU Motor Position - Performance or Incorrect Operation.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) **P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak.** P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0116 - Engine Coolant Temperature Sensor 1 Performance. P050B - Cold Start Ignition Timing Performance. P061A - Level 2 Torque Performance. P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). In addition to the DTCs above the following improvements have been made: Low Idle Speed After Cold Start between -10C to 0C (14F to 32F). Cold Idle Surge With AC Engaged.

MultiAir Unit, please note that there are multiple causes listed for each in the diagnostic procedure. This procedure must be followed to ensure the correct condition is being addressed. ~ Please verify the following (as listed in the first step in diagnostics) is not present before attempting repair:~ - Low Engine Oil - Incorrect oil filter that does not meet OEM specifications - Oil Dirty or Deteriorated (Lack of scheduled oil changes) - Incorrect Oil Viscosity/Weight - Engine Oil Contaminated (i.e. coolant and/or fuel) - Clogged Oil Galley Screen/Filter (top of block - feeds Multi-Air Unit) If there are any questions please contact: Seth Nankee at cell: (248) 303-5434 seth.nankee@fcagroup.com If no response within 15 minutes, please continue with diagnostics/repair.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - EVAP System Small Leak. P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) **P1066 - Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P1068 - Cylinder 2 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106C - Cylinder 4 Oil Supply Solenoid Valve Switch Off Time Out Of Range.** U0401 - Implausible Data Received From ECM/PCM - Signal Invalid. P1185 - General Pressure Sensor Correlation. P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0116 - Engine Coolant Temperature Sensor 1 Performance. P050B - Cold Start Ignition T

The following powertrain system improvements/enhancements are included in this software release: **P0335 - Crankshaft Position Sensor Circuit.** P0480 Cooling Fan 1 Control Circuit/open. P0456 EVAP System Small Leak. U0402 Implausible Data Received From TCM. P0441 EVAP Purge System Performance. P0116 Engine Coolant Temperature Sensor Performance. Other enhancements included in this update: **Elimination of (disable) Low idle 550 RPM to mitigate rough idle complaints (Base idle fully warm maintained at 648 RPM).** New software to address customer?s concern of extended crank times when starting engine. Software to enable the clearing of erroneous DTC U0140 Loss of communication with the Body Control Module (BCM). New software to enable the ?Transmission Quick Learn? feature.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - EVAP System Small Leak. P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) U0401 - Implausible Data Received From ECM/PCM - Signal Invalid. P1185 - General Pressure Sensor Correlation. P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0116 - Engine Coolant Temperature Sensor 1 Performance. P050B - Cold Start Ignition Timing Performance. P061A - Level 2 Torque Performance. P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). In addition to the DTCs above the following improvements have been made: Low Idle Speed After Cold Start between -10C to 0C (14F to 32F). Cold Idle Surge With AC Engaged

(PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs set in the PCM memory: U1504 - Implausible Message Data Length Received From Steering Angle Sensor. P0128 - Thermostat Rationality. P0335 - Crankshaft Position Sensor Circuit. P0340 - Camshaft Position Sensor Circuit Bank 1 Sensor 1. U1424-00 - Implausible Engine Torque Signal Received. P1066 - Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P1068 - Cylinder 2 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106C - Cylinder 4 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - EVAP System Small Leak. P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance.In addition to the DTCs above the following improvements have been made: Min spark changes to prevent catalytic converter overheating. Engine Startup Flare and Idle Surge. Improved vehicle acceleration. P1066 - Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P1068 - Cylinder 2 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106A - Cylinder 3 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P106C - Cylinder 4 Oil Supply Solenoid Valve Switch Off Time Out Of Range. U0401 - Implausible Data Received From ECM/PCM - Signal Invalid.

See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or one or more of the following conditions. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: 2015 UF Vehicles with (Sales Codes ED6, ED8) P050D - Cold Start Rough Idle. P0335 - Crankshaft Position Sensor Circuit. P1607 - PCM Internal Shutdown Timer Rationality. P0133 - O2 Sensor 1/1 Slow Response. P0456 - EVAP System Small Leak. P0480 - Cooling Fan 1 Control Circuit/Open. U0402 - Implausible Data Received From TCM. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0441 - Evap Purge System Performance. P0116 - Engine Coolant Temperature Sensor 1 Performance. In addition to the DTCs above the following improvements have been made: Engine Startup Flare and Idle Surge. Improved vehicle acceleration. 2015 PF Vehicles with (Sales Codes ED6, ED8) **U0401 - Implausible Data Received From ECM/PCM - Signal Invalid. P1185 - General Pressure Sensor Correlation.** P050D - Cold Start Rough Idle. P0133 - O2 Sensor 1/1 Slow Response. P0456 - Evap System Small Leak. P219A - Bank 1 Air-Fuel Ratio Imbalance. P2172 - High Airflow/Vacuum Leak Detected. P1D73 - AGS Performance. U0140 - Lost Communication With Body Control Module. P0116 - Engine Coolant Temperature Sensor 1 Performance. P050B - Cold Start Ignition Timing Performance. P061A - Level 2 Torque Performance. P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). In addition to the DTCs above the following improvements have been made: Low Idle Speed After Cold Start between -10C to 0C (14F to 32F). Cold Idle Surge With AC Eng

Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~

A customers may experience one or more of the following: Rearview Camera image appears jittery Inability to establish a WiFi connection when security feature is enabled Audio distortion/popping heard while playing Apple devices through the USB port Navigation system improvements Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running The Radio may switch from SiriusXM to an AM station by itself Uconnect registration always present, can not remove Uconnect account Teleprompter does not appear when pressing the Voice Recognition (VR) button VR operation cancels while in media mode Radio may display previous cameras image before displaying the current image Navigation lost vehicle position, during route calculation Navigation displays are missing after vehicle heading changes Navigation giving incorrect guidance to exit the highway. FM audio may switch to AM after ignition cycle. Text messages appear as sender?s phone number not their name. VR phone button may not work at times. Audio muted after AUX device is disconnected. VR, ? Listen? to text, will only play 1st message. SirusXM station information does not update. Speed adjusted volume, may not work. AM or FM seek or tuner soft keys may be missing. Display screen show ambient temperature as ?- - ? not normal values.Improvements: High Definition (HD) radio buffering Spanish translation Radio station, scroll feature Making assist calls App functionality and screen displays Displays correct media, song titles and tracks Travel Link, Points Of Interest (POI), displaying movies and favorites Audio for strong AM station VR performance Settings can only be changed in run mode, not ACC. Notify user when messaging features are not supported on certain phones/devices. Shows direction and distance for POI when using VR.

reprogramming the Powertrain Control Module (PCM) with new software. The following powertrain system improvements/enhancements are included in this software release. New software to address customer?s concern of extended crank times when starting engine. Software to enable the clearing of erroneous DTC U0140 - Loss of communication with the Body Control Module (BCM). New software to enable the transmission quick learn feature.

Control Module (PCM) with new software. Some customers may comment the vehicle takes an abnormal amount of time to start or that the engine crank time is longer than expected.

Transmission Control Module (TCM) with new software. The following Transmission Control Module (TCM) calibration improvements are available for (KL) Jeep Cherokee. Both engines ((EHB) 3.2L V6 24V VVT and (ED6) 2.4L I4 Multi Air) ? P1DB8 Unintended Torque Applied while in Neutral (set due to erroneous DTC) ? P1DCF TCM Monitoring Processor Performance - Unallowed Park Engagement due to ABS Failure (set due to erroneous DTC). ? P1DD0 TCM Monitoring Processor Performance - Unallowed Park Engagement (set due to erroneous DTC). 2.4L KL (ED6) only ? Shift comfort complaint on 1-2 and 2-3 upshifts when lifting foot off throttle ? P1DCF TCM Monitoring Processor Performance - Unallowed Park Engagement due to ABS Failure (set due to erroneous DTC). ? P1DD0 TCM Monitoring Processor Performance - Unallowed Park Engagement (set due to erroneous DTC). ? Busy shifting from transmission on grades ? Shift busyness at 75 MPH with 7-8 and 8-7 shifts ? Shift comfort complaint on 3-2 and 2-1 coasting downshifts in Sport mode 3.2L KL (EHB) only ? Shift comfort complaints during ESS auto-start and launch The following Transmission Control Module (TCM) calibration improvements are available for (UF) 200. ? P1DB8 Unintended Torque Applied while in Neutral set due to erroneous DTC ? Slow to downshift. Fixed by making 9-7, 7-4, and 6-4 downshifts more available ? Poor shift quality on 1-2 and 2-3 lift-foot upshifts ? Poor shift quality on 4-3 downshift while coasting ? Poor shift quality on 4-3, 3-2, and 2-1 coasting downshifts in Sport mode

bulletin involves inspecting and, if required, updating the radio software. A customer may arrive at the dealership with the following concerns: ? Rearview Camera image appears jittery. ? Inability to establish a WiFi connection when security feature is enabled. ? Audio distortion/popping heard while playing Apple devices through the USB port.. ? Navigation system improvements. ? Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running.

reprogramming the Powertrain Control Module (PCM) with new software. Some customers may comment the vehicle takes an abnormal amount of time to start or that the engine crank time is longer than expected. This software corrects this concern as well as enables the transmission quick learn feature.

Family built without an engine cover. Please do not order this part as a shortage and error on this model. Cover may be installed with customer pay.

A small number of customers may experience one or more of the following: ? **?Navigation Failed? message is displayed. ? Navigation is inoperative or inaccurate. ? CD player will not play songs and/or locks up the radio. ? The clock will not automatically update to local time. ? The clock may be off by several hours (RA3 only). ? HVAC temperature out of sync with radio display (KL vehicles). ? Some Uconnect App remote commands do not execute with the vehicle. ? Radio Apps are inoperative. ? Radio will lock up. Radio display screen is black or blank. Battery drain due to radio staying on.** Rearview Camera image appears jittery (UF vehicles only). Inability to establish a WiFi connection when security feature is enabled (UF vehicles only). Audio distortion/popping heard while playing Apple devices through the USB port (UF vehicles only). Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running (UF vehicles only). HVAC temperature out of sync with radio display (KL vehicles). Intermittently blind spot chime will not turn off (KL vehicles only). The radio may switch from SiriusXMT to an AM station by itself. Uconnect registration always present, can not remove Uconnect account. Audio muted after AUX device is disconnected. In addition, the following Improvements are included: **Adds Apple SiriT Eyes Free capability for iPhoneT owners. Add the ability to drag and drop icons into the menu bar. Auto Play can now be configured. Enhanced VR performance. Media devices, phone pairing and Bluetooth usage improvements. Improved tuner performance. Enhancements in Connectivity Apps (YelpT, PandoraT, AhaT, etc). Human Machine Interface (HMI) improvements. Adds ?do not disturb? text message feature.**

contact FCA engineering if the following Diagnostic trouble codes are Stored or Active in the ORC module:~ DTC: B223D-00 - OCM DTC Present~ DTC: B0050-13 - Driver Seatbelt Sensor-Circuit Open~ DTC: B0052-13 - Passenger Seatbelt Sensor-Circuit Open~ DTC: B00B5-13 - Driver Seat Track Position Restraints Sensor-Circuit Open~ DTC: B00C5-13 - Passenger Seat Track Position Restraints Sensor-Circuit Open~ DTC: B0028-13 - Right Side Seat Deployment Squib 1-Circuit Open~ DTC: B0020-13 - Left Side Seat Deployment Squib 1-Circuit Open~ Execute DealerCONNECT / TechCONNECT Diagnostic Procedures to assess potential defects to devices connected to the ORC Module depending on the active or stored Diagnostic Trouble Code. If no defects are detected, verify wiring connectivity between the ORC Module and the component associated with the Diagnostic Trouble Code. Investigate connector pins and wire harness terminals for bent,corroded,or spread conditions. If no response within 15 minutes, proceed with repair.~ FCA Engineering Contacts:~ Jay Nagle (ORC Module, OCM module, Driver/passenger seat track position sensor for PF, KL or UF Vehicles ONLY) @ cell (248) 420-4294 or jay.nagle@external.fcagroup.com~ Bill Winfrey (Driver/Passenger Buckle Switch, Passenger/Driver Seat Thorax Airbags) @ cell (248) 941-9221 or william.winfrey@fcagroup.com

contact FCA engineering if ANY of the following Diagnostic trouble codes are Stored or Active in the ORC module:~ DTC: B223D-00 - OCM DTC Present~ DTC: B0050-13 - Driver Seatbelt Sensor-Circuit Open~ DTC: B0052-13 - Passenger Seatbelt Sensor-Circuit Open~ DTC: B00B5-13 - Driver Seat Track Position Restraints Sensor-Circuit Open~ DTC: B00C5-13 - Passenger Seat Track Position Restraints Sensor-Circuit Open~ DTC: B0028-13 - Right Side Seat Deployment Squib 1-Circuit Open~ DTC: B0020-13 - Left Side Seat Deployment Squib 1-Circuit Open~ Execute DealerCONNECT / TechCONNECT Diagnostic Procedures to assess potential defects to devices connected to the ORC Module depending on the active or stored Diagnostic Trouble Code. If no defects are detected, verify wiring connectivity between the ORC Module and the component associated with the Diagnostic Trouble Code. Investigate connector pins and wire harness terminals for bent, corroded, or spread conditions. If no response within 15 minutes, proceed with repair.~ FCA Engineering Contacts:~ Jay Nagle (ORC Module, Driver/passenger seat track position sensor for PF, KL or UF Vehicles ONLY) @ cell (248) 420-4294 or jay.nagle@external.fcagroup.com~ Malcolm Whitehouse (OCM Module - PF,KL, or UF Vehicles ONLY)@248-462-4703 or Malcolm.Whitehouse@fcagroup.com.~ Bill Winfrey (Driver/Passenger Buckle Switch, Passenger/Driver Seat Thorax Airbags) @ cell (248) 941-9221 or william.winfrey@fcagroup.com~

Please return stock packaged before 2016/07/31 (31 July, 2016)of follow ing part numbers:68176457AF, 68176459AF. Please return suspect parts back to your facing depot using Return Code 02, before 13 September, 2016.

contact FCA engineering if the following Diagnostic trouble codes are Stored or Active in the ORC module:~ DTC: B223D-00 - OCM DTC Present~ DTC: B0050-13 - Driver Seatbelt Sensor-Circuit Open~ DTC: B0052-13 - Passenger Seatbelt Sensor-Circuit Open~ DTC: B00B5-13 - Driver Seat Track Position Restraints Sensor-Circuit Open~ DTC: B00C5-13 - Passenger Seat Track Position Restraints Sensor-Circuit Open~ DTC: B0028-13 - Right Side Seat Deployment Squib 1-Circuit Open~ DTC: B0020-13 - Left Side Seat Deployment Squib 1-Circuit Open~ Execute DealerCONNECT / TechCONNECT Diagnostic Procedures to assess potential defects to devices connected to the ORC Module depending on the active or stored Diagnostic Trouble Code. If no defects are detected, verify wiring connectivity between the ORC Module and the component associated with the Diagnostic Trouble Code. Investigate connector pins and wire harness terminals for bent,corroded,or spread conditions. If no response within 15 minutes, proceed with repair.~ FCA Engineering Contacts:~ Jay Nagle (ORC Module, OCM module, Driver/passenger seat track position sensor for PF, KL or UF Vehicles ONLY) @ cell (248) 420-4294 or jay.nagle@external.fcagroup.com~ Bill Winfrey (Driver/Passenger Buckle Switch, Passenger/Driver Seat Thorax Airbags) @ cell (248) 941-9221 or william.winfrey@fcagroup.com

(M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~

Rear Driveline Module (RDM) and Drivetrain Control Module (DTCM). A customer with a KL vehicle may experience difficulty shifting out of 4 Wheel Low (4WL). A customer with a UF vehicle may experience All Wheel Drive (AWD) not operating correctly.

300-0629 or David Dysarz at (248) 944-0310. If you do not receive a call within 15 minutes please proceed with the repair. Please return parts back to FCA Engineering if ESM is deemed non-functional after performing this TechTip

If a cylinder head is replaced on a vehicle more than 1 time for any reason, please call any of the following people. First: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com Second: Kevin Refalo - Cell (248) 260-0738 Kevin.refalo@facgroup.com If no response in 15 minutes, proceed with repair.

If cylinder head is replaced on a vehicle more than 1 time for any reason, please call any of the following people.~ First: Ron Dallison ? Cell (248) 292-9510 Ron.dallison@fcagroup.com ~ Second: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com~ If a response is not received within 15 mins, then proceed with the necessary repair.

from the rear differential area FCA is currently working on a fix for the concern. Please do not replace the differential motor or the rear differential module for this concern. A field fix will be available early the second quarter of 2016.

The customer may describe a loud high frequency noise that happens within 20 seconds of engine startup and lasts about 90 seconds intermittently during a cold engine start, approximately 0C (32F) and below.

FROM THE REAR DIFFERENTIAL AREA FCA HAS RELEASED TSB 03-003-16 JUNE 21 TO ADDRESS THIS CONCERN"

ENGINEERING IS SEEKING INFORMATION REGARDING THIS PART.~ DYE MUST BE USED TO DETERMINE WHERE THE LEAK IS COMING FROM BEFORE REPLACING. ALSO PLEASE CHECK THE RECENTLY UPDATED SERVICE BULLETIN NUMBER 09-008-15. ~ FIRST: NICK MORAND CELL (248) 410-5078 - NICK.MORAND@FCAGROUP.COM SECOND: BOB JACKSON CELL (248) 944-0466 - BOB.JACKSON@FCAGROUP.COM THIRD: JOE LOVELL CELL (734 309-6467 - JOE.LOVELL@FCAGROUP.COM IF A RESPONSE IS NOT RECEIVED WITHIN 15 MINS, THEN PROCEED WITH THE NECESSARY REPAIR."

BULLETIN INVOLVES REPROGRAMMING THE POWERTRAIN CONTROL MODULE (PCM) WITH THE LATEST AVAILABLE SOFTWARE. A SMALL NUMBER OF CUSTOMERS MAY EXPERIENCE A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION OR ONE OR MORE OF THE FOLLOWING CONDITIONS. UPON FURTHER INVESTIGATION THE TECHNICIAN MAY FIND THE FOLLOWING DIAGNOSTIC TROUBLE CODES (DTCS) SET IN THE PCM, MEMORY:2015 UF VEHICLES WITH (SALES CODES ED6, ED8) P050D - COLD START ROUGH IDLE. P0335 - CRANKSHAFT POSITION SENSOR CIRCUIT. P1607 - PCM INTERNAL SHUTDOWN TIMER RATIONALITY. P0133 - O2 SENSOR 1/1 SLOW RESPONSE. P0456 - EVAP SYSTEM SMALL LEAK. P0480 - COOLING FAN 1 CONTROL CIRCUIT/OPEN. U0402 - IMPLAUSIBLE DATA RECEIVED FROM TCM. P2172 - HIGH AIRFLOW/VACUUM LEAK DETECTED.P1D73 - AGS PERFORMANCE. U0140 - LOST COMMUNICATION WITH BODY CONTROL MODULE. P0441 - EVAP PURGE SYSTEM PERFORMANCE. P0116 - ENGINE COOLANT TEMPERATURE SENSOR 1 PERFORMANCE.IN ADDITION TO THE DTCS ABOVE THE FOLLOWING IMPROVEMENTS HAVE BEEN MADE:ENGINE STARTUP FLARE AND IDLE SURGE.IMPROVED VEHICLE ACCELERATION. 2015 PF VEHICLES WITH (SALES CODES ED6, ED8)U0401 - IMPLAUSIBLE DATA RECEIVED FROM ECM/PCM - SIGNAL INVALID. P1185 - GENERAL PRESSURE SENSOR CORRELATION.P050D - COLD START ROUGH IDLE. P0133 - O2 SENSOR 1/1 SLOW RESPONSE. P0456 - EVAP SYSTEM SMALL LEAK.P219A - BANK 1 AIR-FUEL RATIO IMBALANCE. P2172 - HIGH AIRFLOW/VACUUM LEAK DETECTED.P1D73 - AGS PERFORMANCE.U0140 - LOST COMMUNICATION WITH BODY CONTROL MODULE. P0116 - ENGINE COOLANT TEMPERATURE SENSOR 1 PERFORMANCE. P050B - COLD START IGNITION TIMING PERFORMANCE. P061A - LEVEL 2 TORQUE PERFORMANCE.P2172 - HIGH AIRFLOW/VACUUM LEAK DETECTED (INSTANTANEOUS ACCUMULATION).IN ADDITION TO THE DTCS ABOVE THE FOLLOWING IMPROVEMENTS HAVE BEEN MADE: LOW IDLE SPEED AFTER COLD START BETWEEN -10C TO 0C (14F TO 32F).

this is normal and not a defect.

compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold

Customer noise issue due to loose trailing link If a trailing link is damaged or noisy, please call Steve Lin at Cell 909-569-5117 prior to removing the part. If you do not hear from us within 15 minutes please continue with the repair.

semi and full synthetic oils.

as a separate part number in the kit which is 04753095AB.

compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold

Detected Message

compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold

awareness regarding the use of aftermarket parts.

structural repair parts usage.

Prior to replacing an Active Grille Shutter (AGS) for DTC code U11E9 (Loss of Communication), please contact Tom Hallahan at cell (248) 494 2083 or email (tom.hallahan@fcagroup.com). If he does not respond within 15 minutes, please proceed with replacing AGS.~

Prior to replacing an Active Grille Shutter (AGS) for DTC code U11E9 (Loss of Communication), please contact Tom Hallahan at cell (248) 494 2083 or email (tom.hallahan@fcagroup.com). If he does not respond within 15 minutes, please proceed with replacing AGS.~

Detected Message

Customer noise issue due to loose trailing link If a trailing link is damaged or noisy, please call Steve Lin at Cell 909-569-5117 prior to removing the part. If you do not hear from us within 15 minutes please continue with the repair.

awareness regarding the use of aftermarket parts.

structural repair parts usage.

Prior to replacing an Active Grille Shutter (AGS) for DTC code U11E9 (Loss of Communication), please contact Stephen Koch at cell (248) 379-1220 or email (spk10@chrysler.com). If he does not respond within 15 minutes, please proceed with replacing AGS.

Prior to replacing an Active Grille Shutter (AGS) for DTC code U11E9 (Loss of Communication), please contact Tom Hallahan at cell (248) 494 2083 or email (tom.hallahan@fcagroup.com). If he does not respond within 15 minutes, please proceed with replacing AGS.~

Please return stock of part number CBXDP361AA. Replacement part number is CBXDP361AB w hich is in stock and available for order. Please return suspect parts back to your facing depot using Return Code 02, before 16 September, 2016.

(Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~

illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): P1DB7-00 - Torque Converter Clutch Performance.

Module (TCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination on vehicles equipped with a 948TE 9 speed automatic transmission (sales code DFH or DFJ). Upon further investigation, a technician may find Diagnostic Trouble Codes (DTCs) stored in the TCM memory. ? P0887 - TCM Power Control Circuit High ? P0711 - Transmission Fluid Temperature Sensor A Circuit Range-Performance ? P1DAD - Input Shaft-Output Shaft Direction Correlation In addition to addressing the above DTCs, this TCM calibration update is being released to enable the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

A small number of customers may experience less than desired shift quality during a 5-4 downshift and/or Malfunction Indicator Lamp (MIL) Illumination. Upon further inspection, the technician may find Diagnostic Trouble Code (DTC) U0402 setting in the Powertrain Control Module (PCM) memory.

A small number of customers may experience less than desired shift quality during a 5-4 downshift and/or Malfunction Indicator Lamp (MIL) Illumination. Upon further inspection, the technician may find Diagnostic Trouble Code (DTC) U0402 setting in the Powertrain Control Module (PCM) memory.

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

A small number of customers may experience less than desired shift quality during a 5-4 downshift and/or Malfunction Indicator Lamp (MIL) Illumination. Upon further inspection, the technician may find Diagnostic Trouble Code (DTC) U0402 setting in the Powertrain Control Module (PCM) memory.

A small number of customers may experience less than desired shift quality during a 5-4 downshift and/or Malfunction Indicator Lamp (MIL) Illumination. Upon further inspection, the technician may find Diagnostic Trouble Code (DTC) U0402 setting in the Powertrain Control Module (PCM) memory.

A small number of customers may experience less than desired shift quality during a 5-4 downshift and/or Malfunction Indicator Lamp (MIL) Illumination. Upon further inspection, the technician may find Diagnostic Trouble Code (DTC) U0402 setting in the Powertrain Control Module (PCM) memory.

A small number of customers may experience less than desired shift quality during a 5-4 downshift and/or Malfunction Indicator Lamp (MIL) Illumination. Upon further inspection, the technician may find Diagnostic Trouble Code (DTC) U0402 setting in the Powertrain Control Module (PCM) memory.

The customer may experience an intermittent inability to shift into any gear range. This condition should only last a few seconds. If this condition happens when driving in any forward gear, the transmission will default to drive. If the vehicle is in reverse, the transmission will default to neutral. If the transmission is in park or neutral the transmission will not change gear selection. On further inspection one or all of the following DTCs may be found: U1467 Implausible Driver Shift Request Signal Received On CAN and D-PT CAN. U0103-00 Lost Communication With Electric Gear Shift Module. U11E3-00 TCM Lost Communication With ESM On DPT CAN.

If this vehicle contains 1 of the 30 Diagnostic Codes in the 9 Speed Tutorial located on the Service Home Page then please follow the repair steps and submit a Topology report as well as a Vehicle Scan Report with the Warranty Claim.~

Module (TCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination and/or one of the following conditions. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the TCM memory. 2015 KL Vehicles **P0887-00 - TCM Power Control Circuit High. P061B-00 - Internal Control Module Torque Calculation Performance.** U0401-00 - Implausible Data Received From ECM/PCM. P1DAD- 00 - Input Shaft-Output Shaft Direction Correlation. P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6/ED8). Other enhancements included in this update: **Garage shift improvements. Shift improvements for 2-1 shift quality when using Electronic Range Sensor (ERS) function for 2-1 downshift and 3-1 shift quality (bump) when coasting to a stop (ED6/ED8).** When driving on grades, the 3-2 downshift is hard to achieve or not available. 2015 UF Vehicles **P0887-00 - TCM Power Control Circuit High. P072F-00 - Stuck In Gear 4 P061B-00 - Internal Control Module Torque Calculation Performance.** P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance

(DTCM) with the latest available software. Some vehicles may experience a constant high pitched whine coming from rear axle area.

If this vehicle contains 1 of the 30 Diagnostic Codes in the 9 Speed Tutorial located on the Service Home Page then please follow the repair steps and submit a Topology report as well as a Vehicle Scan Report with the Warranty Claim.~

reprogramming the Transmission Control Module (TCM) with new software. The following TCM calibration update is being released to enable the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

reprogramming the Transmission Control Module (TCM) with new software. The following TCM calibration update is being released to enable the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

reprogramming the Transmission Control Module (TCM) with new software. The following TCM calibration update is being released to enable the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

reprogramming the Transmission Control Module (TCM) with new software. The following TCM calibration update is being released to enable the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

Module (TCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination and/or one of the following conditions. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the TCM memory. 2015 KL Vehicles ? When driving on grades, the 3-2 downshift is hard to achieve or not available (ED6). ? P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6). ? P0887-00 - TCM Power Control Circuit High. ? U0401-00 - Implausible Data Received From ECM/PCM. ? P1DAD-00 - Input Shaft-Output Shaft Direction Correlation. 2015 UF Vehicles ? When driving on grades, the 3-2 downshift is hard to achieve or not available (ED6). ? P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6). ? P0885-00 - TCM Power Control Circuit (ED6). ? P0975-00 - Shift Solenoid B Control Circuit Performance (ED6). ? P0887-00 - TCM Power Control Circuit High (ED6). ? P0978-00 - Shift Solenoid 3 Control Circuit Performance (ED6). ? P0981-00 - Shift Solenoid 4 Control Circuit Performance (ED6). ? P0984-00 - Shift Solenoid 5 Control Circuit Performance (ED6). ? P1634-00 - TCM Internal Watchdog Performance (ERB). ? U0401-00 - Implausible Data Received From ECM/PCM. ? P1DAD-00 - Input Shaft-Output Shaft Direction Correlation. ? Garage shift improvements. Any shifting combination into or out of, Park, Drive, Reverse or Neutral (shifting at little or no vehicle speed). ? Up shift improvements, 2-3, 3-4 or 4-5 (ERB). This TCM calibration update being released also enables the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being rel

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

Module (TCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination and/or one of the following conditions. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the TCM memory. 2015 KL Vehicles ? When driving on grades, the 3-2 downshift is hard to achieve or not available (ED6). ? P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6). ? P0887-00 - TCM Power Control Circuit High. ? U0401-00 - Implausible Data Received From ECM/PCM. ? P1DAD-00 - Input Shaft-Output Shaft Direction Correlation. 2015 UF Vehicles ? When driving on grades, the 3-2 downshift is hard to achieve or not available (ED6). ? P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6). ? P0885-00 - TCM Power Control Circuit (ED6). ? P0975-00 - Shift Solenoid B Control Circuit Performance (ED6). ? P0887-00 - TCM Power Control Circuit High (ED6). ? P0978-00 - Shift Solenoid 3 Control Circuit Performance (ED6). ? P0981-00 - Shift Solenoid 4 Control Circuit Performance (ED6). ? P0984-00 - Shift Solenoid 5 Control Circuit Performance (ED6). ? P1634-00 - TCM Internal Watchdog Performance (ERB). ? U0401-00 - Implausible Data Received From ECM/PCM. ? P1DAD-00 - Input Shaft-Output Shaft Direction Correlation. ? Garage shift improvements. Any shifting combination into or out of, Park, Drive, Reverse or Neutral (shifting at little or no vehicle speed). ? Up shift improvements, 2-3, 3-4 or 4-5 (ERB). This TCM calibration update being released also enables the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being rel

nine-speed automatic transmissions.

2015 Jeep Renegade (BU) / 2015 Ram ProMaster (VM)

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

Module (TCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination and/or one of the following conditions. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the TCM memory. 2015 KL Vehicles ? When driving on grades, the 3-2 downshift is hard to achieve or not available (ED6). ? P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6). ? P0887-00 - TCM Power Control Circuit High. ? U0401-00 - Implausible Data Received From ECM/PCM. ? P1DAD-00 - Input Shaft-Output Shaft Direction Correlation. 2015 UF Vehicles ? When driving on grades, the 3-2 downshift is hard to achieve or not available (ED6). ? P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6). ? P0885-00 - TCM Power Control Circuit (ED6). ? P0975-00 - Shift Solenoid B Control Circuit Performance (ED6). ? P0887-00 - TCM Power Control Circuit High (ED6). ? P0978-00 - Shift Solenoid 3 Control Circuit Performance (ED6). ? P0981-00 - Shift Solenoid 4 Control Circuit Performance (ED6). ? P0984-00 - Shift Solenoid 5 Control Circuit Performance (ED6). ? P1634-00 - TCM Internal Watchdog Performance (ERB). ? U0401-00 - Implausible Data Received From ECM/PCM. ? P1DAD-00 - Input Shaft-Output Shaft Direction Correlation. ? Garage shift improvements. Any shifting combination into or out of, Park, Drive, Reverse or Neutral (shifting at little or no vehicle speed). ? Up shift improvements, 2-3, 3-4 or 4-5 (ERB). This TCM calibration update being released also enables the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being rel

A small number of customers may experience less than desired shift quality during a 5-4 downshift and/or Malfunction Indicator Lamp (MIL) Illumination. Upon further inspection, the technician may find Diagnostic Trouble Code (DTC) U0402 setting in the Powertrain Control Module (PCM) memory.

Module (TCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination and/or one of the following conditions. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the TCM memory. 2015 KL Vehicles ? When driving on grades, the 3-2 downshift is hard to achieve or not available (ED6). ? P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6). ? P0887-00 - TCM Power Control Circuit High. ? U0401-00 - Implausible Data Received From ECM/PCM. ? P1DAD - Input Shaft-Output Shaft Direction Correlation. 2015 UF Vehicles ? P1634-00 - TCM Internal Watchdog Performance (ERB). ? Garage shift improvements. Any shifting combination into or out of, Park, Drive, Reverse or Neutral (shifting at little or no vehicle speed). ? Up shift improvements, 2-3, 3-4 or 4-5 (ERB). ? P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance. ? P0887-00 - TCM Power Control Circuit High. ? U0401-00 - Implausible Data Received From ECM/PCM. ? P1DAD - Input Shaft-Output Shaft Direction Correlation. This TCM calibration update being released also enables the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

Module (TCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination and/or one of the following conditions. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the TCM memory. 2015 KL Vehicles **When driving on grades, the 3-2 downshift is hard to achieve or not available (ED6).** **P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6).** P0887-00 - TCM Power Control Circuit High. U0401-00 - Implausible Data Received From ECM/PCM. P1DAD - Input Shaft-Output Shaft Direction Correlation. 2015 UF Vehicles P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance. P0887-00 - TCM Power Control Circuit High. U0401-00 - Implausible Data Received From ECM/PCM. P1DAD - Input Shaft-Output Shaft Direction Correlation. This TCM calibration update being released also enables the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

Module (TCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination on vehicles equipped with a 948TE 9 speed automatic transmission (sales code DFH or DFJ). Upon further investigation, a technician may find Diagnostic Trouble Codes (DTCs) stored in the TCM memory. ? P0887 - TCM Power Control Circuit High ? P0711 - Transmission Fluid Temperature Sensor A Circuit Range-Performance ? P1DAD - Input Shaft-Output Shaft Direction Correlation In addition to addressing the above DTCs, this TCM calibration update is being released to enable the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

Module (TCM) and Powertrain Control Module (PCM) with the latest available software. The following software enhancement, for the 948TE 9-Speed transmission, is being released to change clutch application characteristics to prevent the C-Clutch snap from dislodging.

A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination on vehicles equipped with a 948TE 9 speed automatic transmission (sales code DFH or DFJ). Upon further investigation, a technician may find Diagnostic Trouble Code (DTC) P1DAD - Input Shaft-Output Shaft Direction Correlation stored in the TCM memory. In addition to addressing the above DTC, this TCM calibration update is being released to enable the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

A small number of customers may experience less than desired shift quality during a 5-4 downshift and/or Malfunction Indicator Lamp (MIL) Illumination. Upon further inspection, the technician may find Diagnostic Trouble Code (DTC) U0402 setting in the Powertrain Control Module (PCM) memory.

A small number of customers may experience less than desired shift quality during a 5-4 downshift and/or Malfunction Indicator Lamp (MIL) Illumination. Upon further inspection, the technician may find Diagnostic Trouble Code (DTC) U0402 setting in the Powertrain Control Module (PCM) memory.

Before replacing the AC compressor for noise or in-op:~ 1) Check all AC plumbing connection for leaks with UV light. Any leaks found?~ 2) Does compressor pulley and clutch hub turn freely, or are they seized?~ 3) What was the amount of the recovered refrigerant?~ After these questions have been answered please call one of the individuals below.~ Steve Rice at cell (248) 867-0061~ Mark Briolat at cell (248) 345-0127~ If no response in 15 minutes, please continue with repair.~ If the compressor is replaced, then:~ 4) Drain oil from compressor. What was quantity of oil recovered?

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination and/or one of the following conditions. Upon further investigation, a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the TCM memory. 2015 KL Vehicles P0887-00 - TCM Power Control Circuit High. P061B-00 - Internal Control Module Torque Calculation Performance.** U0401-00 - Implausible Data Received From ECM/PCM. P1DAD- 00 - Input Shaft-Output Shaft Direction Correlation. P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6/ED8). Other enhancements included in this update: Garage shift improvements. Shift improvements for 2-1 shift quality when using Electronic Range Sensor (ERS) function for 2-1 downshift and 3-1 shift quality (bump) when coasting to a stop (ED6/ED8). When driving on grades, the 3-2 downshift is hard to achieve or not available. 2015 UF Vehicles P0887-00 - TCM Power Control Circuit High. P072F-00 - Stuck In Gear 4 P061B-00 - Internal Control Module Torque Calculation Performance.** P0711-00 - Transmission Fluid Temperature Sensor A Circuit Range-Performance (ED6,ED8,EDD or EDE). P0885-00 - TCM Power Control Circuit (ED6,ED8,EDD or EDE). P0975-00 - Shift Solenoid B Control Circuit Performance (ED6,ED8,EDD or EDE). P0887-00 - TCM Power Control Circuit High (ED6,ED8,EDD or EDE). P0978-00 - Shift Solenoid 3 Control Circuit Performance (ED6,ED8,EDD or EDE). P0981-00 - Shift Solenoid 4 Control Circuit Performance (ED6,ED8,EDD or EDE). P0984-00 - Shift Solenoid 5 Control Circuit Performance (ED6,ED8,EDD or EDE). P1634-00 - TCM Internal Watchdog Performance (ERB). U0401-00 - Implausible Data Received From ECM/PCM. P1DAD- 00 - Input Shaft-Output Shaft Direction Corre

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

(DTCM) with the latest available software. Some vehicles may experience a constant high pitched whine coming from rear axle area.

If this vehicle contains 1 of the 30 Diagnostic Codes in the 9 Speed Tutorial located on the Service Home Page then please follow the repair steps and submit a Topology report as well as a Vehicle Scan Report with the Warranty Claim.~

This bulletin involves selectively erasing and reprogramming the Transmission Control Module (TCM) with new software. The following TCM calibration update is being released to enable the new wiTECH based "Transmission Quick Learn" procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

Drive Or Reverse This bulletin involves flash reprogramming of the Transmission Control Module (TCM) with new software. Customers may indicate that they are experiencing delayed shifting when using the paddle shifter and/or harsh engagement when shifting from Park to either Reverse or Drive.

shift quality rating and performing the transmission adaptation learn procedure if required. Customers may indicate that their transmission shift quality does not meet their expectations.

The customer may experience an intermittent inability to shift into any gear range. This condition should only last a few seconds. If this condition happens when driving in any forward gear, the transmission will default to drive. If the vehicle is in reverse, the transmission will default to neutral. If the transmission is in park or neutral the transmission will not change gear selection. On further inspection one or all of the following DTCs may be found: U1467 Implausible Driver Shift Request Signal Received On CAN and D-PT CAN. U0103-00 Lost Communication With Electric Gear Shift Module. U11E3-00 TCM Lost Communication With ESM On DPT CAN.

reprogramming the Transmission Control Module (TCM) with new software. The following TCM calibration update is being released to enable the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

reprogramming the Transmission Control Module (TCM) with new software. The following TCM calibration update is being released to enable the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

This bulletin involves selectively erasing and reprogramming the Transmission Control Module (TCM) with new software. The following TCM calibration update is being released to enable the new wiTECH based ?Transmission Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or when addressing customer concerns of poor shift quality. It is also being released to improve transmission downshift response time during normal driving.

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

Shifts This bulletin involves flash reprogramming of the Transmission Control Module (TCM) with new software. Customers may indicate that they are experiencing delayed shifting when using the paddle shifter and/or poor garage shifts (Park to Reverse or Drive).

Please return suspect stock of follow ing part numbers:52120000AA, 52119435AF, 05078709AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.

This bulletin involves performing transmission harness replacement per S55 recall.Both the PCM and TCM must be up to date for these changes to be effective after the transmission harness repair. Customers may experience a Malfunction Indicator Lamp (MIL) illumination after S55 recall TCM flash has been performed. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: P0901-00 - Clutch 1 Actuator Control Circuit Range Performance.

Module (TCM) withthe latest available software.A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination and/or one of the following conditions. Uponfurther investigation, a technician may find one or more of the following DTCs stored in the TCM memory.2015 KL VehiclesP1634-00 - TCM Internal Watchdog Performance(Sales Codes ED6 or ED8 Only).U1412- Implausible Vehicle Speed Signal Received. U0001- Can C Bus. P0887-00- TCM Power Control Circuit High. P061B-00- Internal Control Module Torque Calculation Performance. U0401-00- Implausible Data Received From ECM/PCM. P1DAD-00- Input Shaft-Output Shaft Direction Correlation. P0711-00- Transmission Fluid Temperature Sensor A Circuit Range-Performance(ED6 or ED8 Only). In addition, some customers may experience one or more of the following conditions:When driving on grades, the 3-2 downshift is hard to achieve or not available.Other enhancements included in this update:Garage shift improvements. Shift improvements for 2-1 shift quality when using Electronic Range Sensor(ERS) function for 2-1 downshift and 3-1 shift quality (bump) when coasting to a stop(ED6 or ED8). 2015 UF VehiclesP0887-00- TCM Power Control Circuit High.P072F-00- Stuck In Gear 4.P061B-00- Internal Control Module Torque Calculation Performance.P0711-00- Transmission Fluid Temperature Sensor A Circuit Range-Performance(ED6, ED8, EDD or EDE Only).P0885-00- TCM Power Control Circuit(ED6, ED8, EDD or EDE Only). P0975-00- Shift Solenoid B Control Circuit Performance(ED6, ED8, EDD or EDE Only).P0887-00- TCM Power Control Circuit High(ED6, ED8, EDD or EDE Only). P0978-00- Shift Solenoid 3 Control Circuit Performance(ED6, ED8, EDD orEDE Only). P0981-00- Shift Solenoid 4 Control Circuit Performance(ED6, ED8, EDD orEDE Only). P0984-00- Shift Solenoid 5 Control Circuit Performance(ED6, ED8, ED

based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality may be erratic.

Before replacing the AC compressor for noise, leaks , or for an inop condition:~ After these questions have been answered please call one of the individuals below.~ 1) Check all AC plumbing connection for leaks with UV light. Any leaks found?~ 2) Does compressor pulley and clutch hub turn freely, or are they seized?~ 3) What was the amount of the recovered refrigerant?~ After these questions have been answered please call one of the individuals below:~ Stev at cell (248) 867-0061~ Mark Briolat at cell (248) 345-0127~ If no response in 15 minutes, please continue with repair.~ If the compressor is replaced, then:~ 4) Drain oil from compressor. What was quantity of oil recovered?

(DTCM) WITH THE LATEST AVAILABLE SOFTWARE. SOME VEHICLES MAY EXPERIENCE A CONSTANT HIGH PITCHED WHINE COMING FROM REAR AXLE AREA."

MAY BE INDICATED *CN

MODULE DUE TO MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATING. *LJ UPDATED 9/10/15. *PE UPDATED 9/18/15. *PE UPDATED 12/3/15

TRANSFER UNIT, REAR, DRIVELINE MODULE & DRIVETRAIN CONTROL MODULE. *LJ

SELECT DOCUMENT SEARCH BUTTON BELOW. TO PREVENT C-CLUTCH SNAP FROM DISLODGING, A NEW SOFTWARE ENHANCEMENT IS RELEASED TO CHANGE THE CHARACTERISTICS OF CLUTCH APPLICATION BY REPROGRAMMING TRANSMISSION CONTROL MODULE (TCM) AND POWERTRAIN CONTROL MODULE (PCM). MODEL 2014-15 JEEP CHEROKEE, 2015 CHRYSLER 200. *PE UPDATED 06/29/15. *LJ

AND MALFUNCTION INDICATOR LAMP (MIL) WILL ILLUMINATE AND REMOVING, DISASSEMBLING AND REPLACING THE C-CLUTCH SNAP RING AND TRANSMISSION. MODEL 2014-15 JEEP CHEROKEE, CHRYSLER 200. *PE UPDATED 10/15/15. *PE

*LJ SEE DOCUMENT SEARCH BUTTON FOR OWNERS LETTER *LJ

*LJ

Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On "

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P2172 - High Airflow/Vacuum Leak Detected ? P1D73 - AGS Performance ? U0140 - Lost Communication With Body Control Module

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic .

The customer may describe one of the following: The radio temperature display does not match the HVAC controller temperature display. After a temperature slide bar movement, the radio display shows the temperature slider waiting for about 3 seconds and then the slide bar jumps again. Insufficient heating or cooling inside the vehicle.

For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands; DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Hands Free Module (and associated components) are the systems responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis. Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)

harness in the front seats if needed. Customers may experience a AWL illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in memory:B0028-13 - Right Side Seat Deployment Squib 1 - Circuit Open. B0020-13 - Left Side Seat Deployment Squib 1 - Circuit Open.

washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic .

Left and right outlet temperatures do not match when system is in "sync" . Occupants will experience being cold ( winter time), on either passenger or driver side, even though the temperature setting is the same. Root cause: Suspect sun senors ( PN 55111274AA and 55111275AA). THERE WILL BE NO DTC FOR THE SUN SENSOR active or stored. The issue is diagnosed by using an INCANDESCENT (not LED) shop lamp. Shine the shop lamp on the left side of the sensor, then on the right side of the sensor, while monitoring sensor output with STARSCAN. The reading should change from 0 (or near zero) to about 20 to 40. The important thing is that the left and right readings are the same, and that they change when the lamp is shone on it.

If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P2172 - High Airflow/Vacuum Leak Detected ? P1D73 - AGS Performance ? U0140 - Lost Communication With Body Control Module

electrical harness connector is properly connected.

Make sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.

washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.

Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)

A customer may notice one of more of the following: Radio display screen may be locked. Intermittently the audio will be inoperative. Backup display may not turn off.This updated software will also include the following enhancements: Voice Recognition (VR) improved accuracy. Adjusting phone volume after the ignition is turned off. Improvements to the climate control screen. Improvements for deleting paired devices/phones. Display screen improvements for incoming calls, on certain cell phones. Always gray out Short Message Service (SMS) text soft key on non-supporting devices.

harness in the front seats if needed. Customers may experience a AWL illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in memory:B0028-13 - Right Side Seat Deployment Squib 1 - Circuit Open. B0020-13 - Left Side Seat Deployment Squib 1 - Circuit Open.

The customer may describe one of the following: The radio temperature display does not match the HVAC controller temperature display. After a temperature slide bar movement, the radio display shows the temperature slider waiting for about 3 seconds and then the slide bar jumps again. Insufficient heating or cooling inside the vehicle.

equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.

radio FOTA (Firmware Update Over the Air) has been completed, please DO NOT replace the radio. To recover the radio, 12v power needs to be disconnect from the radio to clear radio memory either by removal of the radio fuse or preforming a battery disconnect. Note: Fuse removal is the preferred method. The radio needs to be disconnected from power long enough to clear memory and discharge the Capacitance within the radio. Please refer to the latest in diagnostics for further information.

Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.

Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.

A customer may notice one or more of the following: ? Radio may reset if muted after vehicle is started. ? Radio display screen intermittently may go blank. ? Radio display screen may be locked. ? Intermittently the audio will be inoperative. ? Backup display may not turn off. This updated software will also include the following enhancements: ? Improvements for USB connections on certain cell phones. ? Voice Recognition (VR) improved accuracy. ? Adjusting phone volume after the ignition is turned off. ? Improvements to the climate control screen. ? Improvements for deleting paired devices/phones. ? Display screen improvements for incoming calls, on certain cell phones. ? Always gray out Short Message Service (SMS) text soft key on non-supporting devices.

A customer may notice one or more of the following: ? Radio display screen intermittently may go blank. ? Radio display screen may be locked. ? Intermittently the audio will be inoperative. ? Backup display may not turn off. This updated software will also include the following enhancements: ? Voice Recognition (VR) improved accuracy. ? Adjusting phone volume after the ignition is turned off. ? Improvements to the climate control screen. ? Improvements for deleting paired devices/phones. ? Display screen improvements for incoming calls, on certain cell phones. ? Always gray out Short Message Service (SMS) text soft key on non-supporting devices.

A customer may notice one or more of the following: ? Radio display screen may be locked. ? Intermittently the audio will be inoperative. ? Backup display may not turn off. This updated software will also include the following enhancements: ? Voice Recognition (VR) improved accuracy. ? Adjusting phone volume after the ignition is turned off. ? Improvements to the climate control screen. ? Improvements for deleting paired devices/phones. ? Display screen improvements for incoming calls, on certain cell phones. ? Always gray out Short Message Service (SMS) text soft key on non-supporting devices.

The customer may describe one of the following: The radio temperature display does not match the HVAC controller temperature display. After a temperature slide bar movement, the radio display shows the temperature slider waiting for about 3 seconds and then the slide bar jumps again. Insufficient heating or cooling inside the vehicle.

Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)

Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. * P2172 - High Airflow/Vacuum Leak Detected * P1D73 - AGS Performance * U0140 - Lost Communication With Body Control Module

A customer may notice one of more of the following: Radio display screen may be locked. Intermittently the audio will be inoperative. Backup display may not turn off.This updated software will also include the following enhancements: Voice Recognition (VR) improved accuracy. Adjusting phone volume after the ignition is turned off. Improvements to the climate control screen. Improvements for deleting paired devices/phones. Display screen improvements for incoming calls, on certain cell phones. Always gray out Short Message Service (SMS) text soft key on non-supporting devices.

Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the Diagnostic Trouble Code (DTC) listed below Set in the PCM. * P2172 - High Airflow/Vacuum Leak Detected * P1D73 - AGS Performance * U0140 - Lost Communication With Body Control Module

The customer may describe the hood latch release cable hanging down too low under the instrument panel.

electrical harness connector is properly connected.

Make sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.

have stock in transit to your dealership. Please return part number CBSZR068AA as per the QIR attached. Replacement part can be obtained by ordering the same part number (CBSZR068AA) Please return suspect parts back to your facing depot using Return Code 02, before 02 September, 2016.

Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) are the systems responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)

Prior to replacing this part due to "Low Washer Fluid" message on the dash when the washer fluid bottle is full, please verify I101 48-way black connector regarding W11 & W1 circuits, then clean and secure as needed to complete. If diagnostics point to Float Sensor failure and requires replacement, carefully remove SENSOR-WASHER FLUID LEVEL so as to not damage part for FCA analysis. If no response in 15 minutes continue with repair.

POWER CONTROL MODULE REQUIRES REPROGRAMMING WITH LATEST SOFTWARE AVAILABLE *CN UPDATED 12/21/15 *CN

*LJ UPDATED 06/22/15*LJ

18.01.35 (BU Vehicles)

Cluster (IPC) with updated software. The customer may notice the cruise control set speed that is displayed in the Electronic Vehicle Information Center (EVIC), is different to that which is displayed on the speedometer. The EVIC may be in KPH and the speedometer will show the correct speed in MPH.

Air update (FOTA) and provides a service technician an overview of the steps a customer will need to take to complete the update. The following improvements are included in this update: Adds Apple Siri Eyes Free capability for iPhone owners. Auto Play can now be configured. Adds do not disturb text message feature. The ability to drag and drop icons into the menu bar. Fix for radio locks up/frozen. Fix for stuck on black/blank screen. Human Machine Interface (HMI) improvements. Several navigation improvements. Fix for radio loses time. Charge Complete notification is not received (RU PHEV only). Media devices, Phone pairing and Bluetooth usage improvements. Improved tuner performance. Enhanced Voice recognition (VR) performance. Enhancements in Connectivity Apps (Yelp, Pandora, Aha, etc).

18.01.35 (BU Vehicles)

18.01.35 (BU Vehicles)

Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update.

A small number of customers may experience one or more of the following: ? Radio screen display freezes while using Point of Interest (POI) feature. ? Voice Recognition (VR) - voice commands not working. ? Improper translation of some words and units of meter and kilometers.

Creating a Star case and recording the MDN and MEID with in the Star Case. The Star center will reply back with an access code that will need to be entered into the radio. The customer may notice that their Uconnect Apps do not work and they can?t register with Uconnect.

for Assist and 911 buttons and replacing the mirror if the buttons are not there. The customer may describe that the Assist and 911 buttons are not on the inside rear view mirror (Fig. 1). A small number of customers with a Uconnect access RA3 radio may have an inside rear view mirror without Assist and 911 buttons (Fig. 1).

NOTE: The customers or the dealers will not be charged for activating the navigation feature. The Monroney label shows that these vehicles came with a RA3 radio and Navigation and Sound Group 1, which includes an active navigation system. RA3 radios do not come from the factory with the navigation feature enabled, this feature has to be enabled by the dealer. Vehicles with a RA3 radio should not have been equipped with the option package, Navigation and Sound Group 1 (Sales code AS4).

Air update (FOTA) and provides a service technician an overview of the steps a customer will need to take to complete the update. The following improvements are included in this update: Adds Apple Siri Eyes Free capability for iPhone owners. Auto Play can now be configured. Adds do not disturb text message feature. The ability to drag and drop icons into the menu bar. Fix for radio locks up/frozen. Fix for stuck on black/blank screen. Human Machine Interface (HMI) improvements. Several navigation improvements. Fix for radio loses time. Charge Complete notification is not received (RU PHEV only). Media devices, Phone pairing and Bluetooth usage improvements. Improved tuner performance. Enhanced Voice recognition (VR) performance. Enhancements in Connectivity Apps (Yelp, Pandora, Aha, etc).

Cluster (IPC) with updated software. The customer may notice the cruise control set speed that is displayed in the Electronic Vehicle Information Center (EVIC), is different to that which is displayed on the speedometer. The EVIC may be in KPH and the speedometer will show the correct speed in MPH.

Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The following improvements are included in this update:Fix for sport mode not working in the performance menu page (2015 LA equipped with 6.4L and 5.7L Sales Codes ESH and EZC Only). Adds Apple Siri Eyes Free capability for iPhone owners. Auto Play can now be configured. Adds do not disturb text message feature. The ability to drag and drop icons into the menu bar. Fix for radio locks up/frozen. Fix for stuck on black/blank screen. Human Machine Interface (HMI) improvements. Several navigation improvements. Fix for radio loss of time display. Media devices, phone pairing and Bluetooth usage improvements. Improved tuner performance. Enhanced Voice recognition (VR) performance. Enhancements in Connectivity Apps (Yelp, Pandora, Aha, etc).

VOICE RECOGNITION COMMANDS MAY NOT WORK *CN

PROPERLY AND THE SOFTWARE NEEDS TO BE UPDATED. MODEL 2015 CHRYSLER 200. *PE

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

or broken oil filter access door. Instead, replace the respective parts: Oil Drain Door = 68248175AA. Oil Filter Access Door = 68248174AA.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

plenum lower panel and dash crossmember. The customer may describe damp or wet carpet in either the left/right side or both front footwells. This condition may be due to a sealant void between the cowl plenum lower panel and dash crossmember or the seam behind the wheel well liner allowing water to enter the vehicle interior.All three areas must be checked and repaired.

or broken oil filter access door. Instead, replace the respective parts: Oil Drain Door = 68248175AA. Oil Filter Access Door = 68248174AA.

or broken oil filter access door. Instead, replace the respective parts: Oil Drain Door = 68248175AA. Oil Filter Access Door = 68248174AA.

industry awareness regarding the recommended usage of Authentic Mopar Glass.

refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

industry awareness regarding the recommended usage of Authentic Mopar Glass.

The customer may describe a wind noise or whistle sound coming from the sunroof.

or broken oil filter access door. Instead, replace the respective parts: Oil Drain Door = 68248175AA. Oil Filter Access Door = 68248174AA.

Please return suspect stock of part numbers: 1ZA04DX9AE, 1ZA05DX9AE. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.

stock in transit to your dealership. Please return suspect stock of part number 1N T30XDVAC. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.

The customer may describe a squeal noise from the rear brakes. Noise is only present during the first few brake applies in reverse. Noise is most prevalent at low temperatures around -12 to -4 degrees C (10 to 25 degrees F) after an overnight cold soak and during low brake pedal apply pressure. Noise goes away after approximately 5 brake applies.

The customer may describe the EPB does not engage with the ?Auto Apply? feature selected.

The customer may describe a squeal noise from the rear brakes. Noise is only present during the first few brake applies in reverse. Noise is most prevalent at low temperatures around -12 to -4 degrees C (10 to 25 degrees F) after an overnight cold soak and during low brake pedal apply pressure. Noise goes away after approximately 5 brake applies.

The customer may describe a squeal noise from the rear brakes. Noise is only present during the first few brake applies in reverse. Noise is most prevalent at low temperatures around -12 to -4 degrees C (10 to 25 degrees F) after an overnight cold soak and during low brake pedal apply pressure. Noise goes away after approximately 5 brake applies.

New software is available to optimize Advanced Brake Assist (ABA) performance in low tractions situations.

New software is available to optimize Advanced Brake Assist (ABA) performance in low tractions situations.

New software is available to optimize Advanced Brake Assist (ABA) performance in low tractions situations.

seat module then reconfiguring the vehicle. The customer may state the seat bottom cushion is uncomfortable because of a hard or lumpy spot in the bottom seat cushion.

The customer may describe a squeal noise from the rear brakes. Noise is only present during the first few brake applies in reverse. Noise is most prevalent at low temperatures around -12 to -4 degrees C (10 to 25 degrees F) after an overnight cold soak and during low brake pedal apply pressure. Noise goes away after approximately 5 brake applies.

The customer may describe the EPB does not engage with the ?Auto Apply? feature selected.

Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.~ 2) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced (TCM, PCM, ESP/ABS, etc). This fault is not due to the ACC Sensor. No sensor replacement is required.~ 3) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage (if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. **Hints for running Horizontal Alignment procedure: A) Verify speed is between 45 and 75 mph, B) verify the road is relatively straight with signs, poles, guard rails, etc C) Do not tail a vehicle too closely this inhibits the learning procedure

This bulletin involves replacing the front rotors and brake caliper adaptor bolts to correct a brake moan condition. The customer may experience a low frequency noise (300 Hz) such as a moan or howl from the front brakes only when the brakes are applied in reverse.

SEAT MODULE, VENTILATED SEAT PAD AND OCCUPANT CLASSIFICATION MODULE. THE CUSTOMER MAY STATE THE SEAT BOTTOM CUSHION IS UNCOMFORTABLE OR MAY ALSO FEEL A HARD OR LUMPY SPOT IN THE CUSHION."

ADVANCED BRAKE ASSIST PERFORMANCE IN LOW TRACTION SITUATIONS *CN

120,000 of the above vehicles may be missing emission control information. The VECI label is often used during in-use Inspection and Maintenance (I/M) testing to verify proper emissions related components. Incorrect VECI label information could result in denial of vehicle registration for the vehicle in the state of California. A new VECI label must be installed.

Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.

Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.

Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.

Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.

Library for specifications so a suitable alternative can be used

procedures outlined in CSN R01.

procedures outlined in CSN R01.

procedures outlined in CSN R01.

procedures outlined in CSN R01.

procedures outlined in CSN P56.

refrigerant leak at the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet. CONDITION 2: For stock at the dealership of the below Part Number level or older ONLY, use kit 68447796A$ to change the desiccant BAG and the desiccant bag access PLUG before installing the Cooler on the vehicle. 52014588AD level and older only. 52014609AC level and older only. 52014632AC level and older only. 52014797AG level and older only. 52014948AE level and older only. 52014978AF level and older only.

defrost on vehicles built prior to MDH 121500. However, for improved clearance with 3 additional inches, the backlight can be replaced with p/n 68145494AF.

Compressor or Condenser, do not stow any AC lines in proximity to any heat sources, or sharp edges.~ After the vehicle is reassembled, confirm that all AC lines are in correct design position and not in contact with any heat sources, or sharp edges.

defrost on vehicles built prior to MDH 121500. However, for improved clearance with 3 additional inches, the backlight can be replaced with p/n 68145494AF.

refrigerant leak at the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet. CONDITION 2: For stock at the dealership of the below Part Number level or older ONLY, use kit 68447796A$ to change the desiccant BAG and the desiccant bag access PLUG before installing the Cooler on the vehicle. 52014588AD level and older only. 52014609AC level and older only. 52014632AC level and older only. 52014797AG level and older only. 52014948AE level and older only. 52014978AF level and older only.

defrost on vehicles built prior to MDH 121500. However, for improved clearance with 3 additional inches, the backlight can be replaced with p/n 68145494AF.

refrigerant leak at the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet. CONDITION 2: For stock at the dealership of the below Part Number level or older ONLY, use kit 68447796A$ to change the desiccant BAG and the desiccant bag access PLUG before installing the Cooler on the vehicle. 52014588AD level and older only. 52014609AC level and older only. 52014632AC level and older only. 52014797AG level and older only. 52014948AE level and older only. 52014978AF level and older only.

the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet.

defrost on vehicles built prior to MDH 121500. However, for improved clearance with 3 additional inches, the backlight can be replaced with p/n 68145494AF.

If no response in 15 minutes, continue with repair.

Print I-Sheet for technician use.

new guideline states that the tether anchor can be used with a seatbelt to install a child restraint up to the recommended weight limit of the child restraint.

Print I-Sheet for technician use.

Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.

new guideline states that the tether anchor can be used with a seatbelt to install a child restraint up to the recommended weight limit of the child restraint.

The Customer may describe seat belt buckle indicator lamp on and/or chime tone sound when seatbelt is buckled.

Print I-Sheet for technician use.

Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.

technician an overview of the steps a customer will need to take to complete the update.

industry awareness regarding the use of recycled or salvage parts.

industry awareness regarding the use of recycled or salvage parts.

Mopar accessory remote start has been installed.

Please return suspect stock of part number 05182535AD . See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.

Please return all stock of follow ing part numbers:55372082AE, 55372082AD, 55372082AC, 55372082AB, 55372082AA. Replacement part number is 55372082AF w hich is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.

B)

This bulletin provides information regarding inspecting the tire DOT range and mold numbers.

which replacement or repair of steering system components are required.