2026 Chevrolet Silverado 1500 TSBs
213 Technical Service Bulletins across 14 categories
Categories
Infotainment
50 bulletinsThis Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary information communicates to dealers a procedure to reset the radio.
This PI is created to inform GM dealers that some vehicles may intermittently fail to connect wireless Apple CarPlay or...
Read full bulletin
Android Auto after Bluetooth pairing during the first key cycle. The condition is caused by a software anomaly.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and...
Read full bulletin
how to reset/clear the message.
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary information communicates to dealers a procedure to reset the radio.
This Preliminary Information communicates direction for different audio issues with RPO UQA, UQF, UQS, or NKD
This Preliminary information communicates to dealers a procedure to reset the radio.
This Preliminary information communicates to dealers steps to follow to recover an IOK radio.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary Information communicates direction for different audio issues with RPO UQA, UQF, UQS, or NKD
This Preliminary information communicates to dealers a procedure to reset the radio.
This Preliminary information communicates to dealers a procedure to reset the radio.
This Preliminary Information communicates direction for different audio issues with RPO UQA, UQF, UQS, or NKD
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary Information communicates direction for different audio issues with RPO UQA, UQF, UQS, or NKD
This Preliminary Information communicates direction for different audio issues with RPO UQA, UQF, UQS, or NKD
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This preliminary information communicates an issue with the key fob buttons inoperative and how to resync the fobs back...
Read full bulletin
to the vehicle.
This Preliminary information communicates to dealer to contact TAC for a specific display issue.
This preliminary information communicates an issue with the key fob buttons inoperative and how to resync the fobs back...
Read full bulletin
to the vehicle.
This Preliminary Information communicates direction for different audio issues with RPO UQA, UQF, UQS, or NKD
This preliminary information communicates an issue with the key fob buttons inoperative and how to resync the fobs back...
Read full bulletin
to the vehicle.
This Preliminary information communicates to dealers a procedure to reset the radio.
Improvements to audio system performance.
Read full bulletin
Fixes to help ensure proper functionality for the center display. During the update process, your radio may stay on up to 5 minutes after you exit the vehicle. This is expected behavior when an update package is onboard the vehicle. Do not service your vehicle during installation.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary information communicates to dealers steps to follow to recover an IOK radio.
This Preliminary information communicates to dealers steps to follow to recover an IOK radio.
This preliminary information communicates an issue with the key fob buttons inoperative and how to resync the fobs back...
Read full bulletin
to the vehicle.
This Preliminary Information communicates direction for different audio issues with RPO UQA, UQF, UQS, or NKD
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary Information communicates direction for different audio issues with RPO UQA, UQF, UQS, or NKD
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
This Preliminary Information communicates direction for different audio issues with RPO UQA, UQF, UQS, or NKD
This Preliminary information communicates to dealers steps to follow to obtain an IOK radio.
GM Update N25-F163BU This update contains a required software change to help improve the overall software update and diagnostics process.
Read full bulletin
Be sure to install this update to be able to receive future software updates. During the update process, your radio may stay on up to 5 minutes after you exit the vehicle. This is expected behavior when an update package is onboard the vehicle. Do not service your vehicle during installation.
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and...
Read full bulletin
how to reset/clear the message.
Engine
46 bulletinsThis Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is currently...
Read full bulletin
investigating.
This preliminary information communicates an issue with a service column lock message and DTC U3000.
Read full bulletin
Engineering is working on the issue and in the meantime dealerships are to reset/clear the DTC and perform four sleep cycles to verify the DTC does not return.
This PI is created to inform GM dealers that some vehicles may intermittently fail to connect wireless Apple CarPlay or...
Read full bulletin
Android Auto after Bluetooth pairing during the first key cycle. The condition is caused by a software anomaly. Do not replace parts. Engineering is investigating the root cause; customers may continue to drive the vehicle. This PI will be updated or replaced by a TSB once a resolution is determined.
This PI communications information that Engineering has released an OTA to correct the Service Driver Assist message...
Read full bulletin
with current DTC B1B2F Telematics Control Module and U1624 Image Processing Control Module setting.
This Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is currently...
Read full bulletin
investigating.
Fixes to help ensure proper functionality for heating and cooling features Improvements to night mode lights for...
Read full bulletin
shifting gears Fixes for Daytime Running Lamps turning on when set to Off Fixes to help prevent erroneous missing key messages on driver display Fixes for accuracy of low tire pressure alert Fixes for speed threshold for pedestrian alerts Improvements to start reliability and reduced check engine light activation Improvements to turbo system diagnostics Improvements to reliability when extending the running boards on your vehicle
Improvements to reliability when extending the running boards on your vehicle.
Read full bulletin
Improvements to start reliability and reduced check engine light activation. Improvements to turbo system diagnostics. Improves transmission diagnostic software. Reduces unnecessary check engine light activations.
This Preliminary information communicates to the technician on the a potential cause for Buzz/rattle/vibration/ from the...
Read full bulletin
passenger side when the vehicle is under light load, with a 3.0L LZ0 Engine. It also addresses the potential for a slow/no crank or not charging.
Certain vehicles listed above may have a condition in which the vehicle may shift out of park without key fob inside...
Read full bulletin
vehicle while in "Protected Idle" Mode. Dealers will update the BCM software. Owners who have accepted applicable terms and conditions will have the opportunity to accept these software changes using wireless over-the-air (OTA) technology without having to bring their vehicle to a dealership. Alternatively, owners may have their vehicle serviced at a GM dealer to receive these software updates.
This PI communications information that Engineering is investigating the Service Driver Assist message with current DTC...
Read full bulletin
B1B2F Telematics Control Module and U1624 Image Processing Control Module setting.
The purpose of this PI is to inform dealer technicians of a normal cab pressure relief valve noise to avoid unnecessary...
Read full bulletin
part replacement
This Preliminary information communicates an issues with the HVAC making a hum buzz noise when the blower is set to a higher speed.
Read full bulletin
Engineering is working on a new HVAC door seal material to correct the noise.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This preliminary information is to inform technicians and customers that the voice command will be inoperative when trying to open applications.
Read full bulletin
Engineering is investigating and this PI will be converted to a bulletin when a repair is available.
The document advise technicians after an engine repair involving removal of the camshaft actuators, the vehicle may set...
Read full bulletin
p1101 P0172 and or stalls when taken off idle. The technician is instructed to verify the intake and exhaust camshaft actuators are installed onto the correct camshafts.
The document makes technicians aware of a valvetrain tick noise that is created by one or more soft hydraulic valve lash adjusters.
Read full bulletin
The soft lash adjuster concern is due to debris from the valve rocker arm, entering into the lash adjuster. The document instructs the technician to replace all of the lash adjusters and rocker arms in the entire engine if any soft lash adjusters are found.
This PI communications information that Engineering is investigating the Service Driver Assist message with current DTC...
Read full bulletin
B1B2F Telematics Control Module and U1624 Image Processing Control Module setting.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This Preliminary information communicates that some customers may comment that after an auto-stop event the engine does...
Read full bulletin
not restart and to inspect the engine ground strap. Temporarily on hold while PIE0572 is active. PIE0572 has now ended and reinstating the PI.
This Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is currently...
Read full bulletin
investigating.
This PI communicates information informing dealers that Engineering is aware of the clunk noise and is currently...
Read full bulletin
investigating a root cause.
This Preliminary information communication provides information to the technician on installing Regular Production Option Code UVC Rearview Camera.
Read full bulletin
Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 152. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
The document makes technicians aware of a valvetrain tick noise that is created by one or more soft hydraulic valve lash adjusters.
Read full bulletin
The soft lash adjuster concern is due to debris from the valve rocker arm, entering into the lash adjuster. The document instructs the technician to replace all of the lash adjusters and rocker arms in the entire engine if any soft lash adjusters are found.
This Preliminary information communicates to the technician on the a potential cause for Buzz/rattle/vibration from the...
Read full bulletin
passenger side when the vehicle is under light load, with a 3.0L LZ0 Engine.
This Preliminary information communicates the possibility of DTC P30BF failing on low mile vehicles due to the...
Read full bulletin
possibility of the cylinder 1/2 sliding barrel binding on intake camshaft.
Certain vehicles may experience water intrusion due to a hole in the cabin Pressure Relief Valve.
Read full bulletin
Dealers are to seal the hole using RTV sealant.
The document makes technicians aware of a valvetrain tick noise that is created by one or more soft lifters.
Read full bulletin
The soft lifter concern is due to manufacturing debris within the lifter when it was manufactured. The document instructs the technician to replace the soft lifter(s) and the rocker arm it operates.
This Preliminary information communicates the possibility of DTC P30BF failing on low mile vehicles due to the...
Read full bulletin
possibility of the cylinder 1/2 sliding barrel binding on intake camshaft.
This Preliminary information communicates the possibility of injector related DTC's with malfunction indicator lamp on...
Read full bulletin
and potential rough idle
This Preliminary information communicates an issue with blower motor speed changing when air flow is blocked by snow.
This Preliminary information communicates that some customers may comment that after an auto-stop event the engine does...
Read full bulletin
not restart and to inspect the engine ground strap. Temporarily on hold while PIE0572 is active. PIE0572 has now ended and reinstating the PI.
This preliminary information advises dealers that Engine Control Module designation E01 is on a ordering restriction...
Read full bulletin
through technical assistance.
This Preliminary information communicates an issues with the HVAC making a hum buzz noise when the blower is set to a higher speed.
Read full bulletin
Engineering is working on a new HVAC door seal material to correct the noise.
This Preliminary Information communication provides information to the technician about vehicles that have had multiple...
Read full bulletin
repair attempts that are being performed on customers vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
This PI communications information that Engineering is investigating the Service Driver Assist message with current DTC...
Read full bulletin
B1B2F Telematics Control Module and U1624 Image Processing Control Module setting.
This preliminary information advises dealers that Engine Control Module designation E01 is on a ordering restriction...
Read full bulletin
through technical assistance.
This preliminary information communicates an issue with a Service Brake system message and DTC C0597 C055F.
Read full bulletin
Dealers are to replace the brake master cylinder.
This Preliminary information communicates the possibility of DTC P30BF failing on low mile vehicles due to the...
Read full bulletin
possibility of the cylinder 1/2 sliding barrel binding on intake camshaft.
This preliminary information communicates an issue with a Service Brake system message and DTC C0597.
Read full bulletin
Dealers are to replace the brake master cylinder.
Service Update. Certain vehicles listed above may have a condition which can cause the fuel pump power control module to fail.
Read full bulletin
If this were to occur, fuel flow to the engine could be interrupted. Dealers will replace the fuel pump power control module.
PIP6091 was created to advise technicians engineering is aware of a misfire during a passing maneuver is being...
Read full bulletin
investigated.
This Preliminary Information communication provides information to the technician about fluid leaking from the brake...
Read full bulletin
caliper piston area found during a service of the vehicle. The substance is actually excess assembly grease from the caliper boot and piston.
This preliminary information communicates an issue with an SES MIL and reduced power steering, and brake assist that...
Read full bulletin
engineering is working on a fix.
This Preliminary information communicates the possibility of DTC P30BF failing on low mile vehicles due to the...
Read full bulletin
possibility of the cylinder 1/2 sliding barrel binding on intake camshaft.
This Preliminary information communicates information to inform dealer there is a check valve in the washer fluid hose...
Read full bulletin
that connects to the washer pump.
This Preliminary information communicates the possibility of DTC P30BF failing on low mile vehicles due to the...
Read full bulletin
possibility of the cylinder 1/2 sliding barrel binding on intake camshaft.
Other
35 bulletinsThis preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
This PI provides Diagnostics tips on how the LIN bus works and how to diagnosis it.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary information communicates to the technicians a diagnostic tip if a technician loses communication with...
Read full bulletin
the image processor #2 and how to restore communication
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
Certain vehicles listed above may have a condition in which the oil filter was not adequately tightened.
Read full bulletin
Dealers are to check and tighten the oil filter if found to be loose.
This Preliminary information communicates where to find the back antenna for learning new key fobs.
This PI provides diagnostic steps for dealer technicians to verify the condition and ensure that part replacement is...
Read full bulletin
necessary
This Preliminary information communicates recovery procedure after return to dealer message.
This Preliminary information communicates recovery procedure after return to dealer message.
This PI states that if SDGM DTC U3000 Sym 49 is set and no other SDGM DTCs are present, clear DTCs and reset the SDGM.
Read full bulletin
Advises of how to contact PQC to authorize SDGM replacement.
Pi created to provide GM dealers with information on gathering information for projection issue
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
This PI provide diagnostic tip for an SES MIL with DTC P16A7 and/or P16AF.
Read full bulletin
Dealers are to inspect for a loose connection.
PI created to provide dealer technicians with procedures for updating Google Maps.
This Preliminary information communicates how to change a regular vehicle to fleet mode that was not built with the...
Read full bulletin
option.
This Preliminary information communicates the steps on how to save a GDS2 Session Log and upload to a Technical...
Read full bulletin
Assistance Case in CX Connect.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
This preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
PI created to inform customers and dealers of a normal operating characteristic
New Vehicle Monitoring Programs Section in IVH
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary information communicates an issue with super cruise unavailable due to the driver's monitoring camera...
Read full bulletin
and dealers to replace the camera.
This Preliminary Information communication provides information to the technician about vehicles that may have a bump...
Read full bulletin
feel or clunk noise at a stop or on launch. Dealer should communicate to the customer this condition is a normal operating characteristic
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
This Preliminary information communicates a diagnostic tip on how to resolve a issue if the serial data authentication...
Read full bulletin
configuration did not complete correctly.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
Electrical
22 bulletinsThis PI was created to address an Intermittent Loss of Connectivity, GPS, or Wi-Fi Due to OnStar Module concern.
This PI was created to help avoid unnecessary front camera module replacements
This Preliminary information communicates an issue with the dome light off switch not working after the BCM goes asleep.
Read full bulletin
Advise dealership it is working as designed.
Certain vehicles may have been built with the incorrect Body Control Module (BCM) calibration data file.
Read full bulletin
Dealers will reprogram the BCM with the correct software.
This Preliminary Information is to inform customers to follow diagnostics if resetting, disconnecting the module did not...
Read full bulletin
correct it.
This Preliminary information communicates to dealership technicians to perform the reset for the 2 modules noted above.
This Preliminary Information is to inform customers to follow diagnostics if resetting, disconnecting the module did not...
Read full bulletin
correct it.
This Preliminary information communicates an issue with a replace or low FOB battery message
This PI was created to help avoid unnecessary front camera module replacements
This PI was created to help avoid unnecessary front camera module replacements
This PI was created to help avoid unnecessary front camera module replacements
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC'ss
This PI provides diagnostics tips to dealership techs when trying to diagnose a CAN Bus communication issue after an...
Read full bulletin
event like a lightning strike, battery jump started backwards, failure over the air update, etc.
This Preliminary information communicates a issue where the park assist module can set current communication dtc's due...
Read full bulletin
to a timing issue and it may have nothing related to the customers complaint. A software update will be available to repair these flase DTC's
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC's
This Preliminary information communicates information to direct the dealer or upfitter to GM Upfitter Bulletin 203 for...
Read full bulletin
information on installing the Universal Vehicle Module.
Service Update. Certain vehicles listed above may have a condition in which the front object alarm sensor wire harness...
Read full bulletin
retention clip is not inserted in the front bumper bracket. Dealers will verify the harness clip is connected, and reseat if necessary.
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC's
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC's
The Driver Information Center may display a message of Transport Mode On after the ignition is cycled.
This Preliminary Information communication provides information to the technician about vehicles that have an...
Read full bulletin
intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, B3935, C0750, C0755, C0760, C0765, and/or C0775.
This service bulletin provides information on the proper Reflective High Temperature Heat and/or Insulating Tape to use...
Read full bulletin
for certain repairs, such as Wiring Harness Repairs.
Body & Paint
17 bulletinsThis preliminary information communicates a diagnostic tip for the tailgate release system and tailgate ajar message.
This PI Communicates information to ensure Memory Recall is enabled to ensure memory mirrors return to set position...
Read full bulletin
after curbview assist is used.
This PI provides information to repair the door water deflector which is not sealed properly allows water into the door...
Read full bulletin
jam/sill area.
This Preliminary information communicates that the inner tailgate cannot be disabled if the vehicle is not equipped with...
Read full bulletin
passive entry.
Certain vehicles listed above may have a condition in which there are splits in the cab door ring in the rear outboard...
Read full bulletin
side of the roof ditch and exterior cab door ring. Dealers will inspect the rear outboard roof ditch area of the cab door ring and the exterior cab door ring, and weld and seal any identified splits as necessary.
This Preliminary information communicates information on how to disable the Side Blind Zone Detection and Park Assist...
Read full bulletin
systems when a customer removes the pickup box from the vehicle to install an aftermarket bed or body.
PI to explain normal operation for a concern that the outside rearview mirrors may not fold when the doors are locked,...
Read full bulletin
due to the personalization settings for Auto Door Unlocking.
This Preliminary information communicates that the Tailgate Assist Handle is not included with certain truck models and...
Read full bulletin
how to get one if needed.
This Preliminary information communicates information to direct to GM Upfitter bulletin 193 or 205 depending on trim...
Read full bulletin
level for installation instructions for the 9L7 Upfitter Switches.
This PI Communications information on an alternative product dealers can use to perform 19-NA-255: Wax Coating on Frame...
Read full bulletin
Peeling, Metal Shows Corrosion/Rusting due to issue with getting product from current supplier listed in the bulletin.
This Preliminary information communicates an issue with a service keyless entry message caused by aftermarket door...
Read full bulletin
handle covers and they should be removed.
This PI Communicates information to ensure Memory Recall is enabled to ensure memory mirrors return to set position...
Read full bulletin
after curbview assist is used.
This PI Communicates information to ensure Memory Recall is enabled to ensure memory mirrors return to set position...
Read full bulletin
after curbview assist is used.
Certain vehicles listed above may have a condition in which the rear glass window primer is expired.
Read full bulletin
Dealers will replace the rear window.
This Preliminary information communicates that the Tailgate Assist Handle is not included with certain truck models and...
Read full bulletin
how to get one if needed.
This Preliminary information communicates a new tailgate feature which allows the customer to enable or disable the...
Read full bulletin
inner tailgate.
This Preliminary information communicates a diagnostic tip on how to resolve a issue of the horn sounding when vehicle...
Read full bulletin
doors are being closed and the key in vehicle reminder set to off.
Brakes
12 bulletinsThis PI provides diagnostic tips for diagnosing electric trailer brakes issues.
This preliminary information communicates an issue with a Service Brake system message and DTC C055F due to a low battery condition.
Read full bulletin
Dealer are to inspect the battery, battery connections and for any aftermarket devices.
This PI advises dealers that if the K160 Brake System Control Module sets DTC P0606 along with P0562 and/or P25A2,...
Read full bulletin
additional diagnostic aids should be followed before replacing parts. The PI provides guidance to inspect for low voltage conditions, wiring, terminal concerns, and module communication issues that may cause false or intermittent EBCM DTCs.
A dealer may encounter multiple DTCs when a B65Manifold Absolute Pressure/Intake Air Temperature Sensor fails.
Read full bulletin
Diagnostics may be misleading but if the Fuel Rail Temperature has the 419 degrees displayed this PI will assist with repairs.
This PI provides diagnostic tips for diagnosing electric trailer brakes issues.
This preliminary information communicates an issue with a Service Brake system message and DTC C055F due to a low battery condition.
Read full bulletin
Dealer are to inspect the battery, battery connections and for any aftermarket devices.
This preliminary information communicates an issue with a Service Brake system message and DTC C055F due to a low battery condition.
Read full bulletin
Dealer are to inspect the battery, battery connections and for any aftermarket devices.
This preliminary information communicates an issue with a Service Brake system message and DTC C055F due to a low battery condition.
Read full bulletin
Dealer are to inspect the battery, battery connections and for any aftermarket devices.
This Preliminary Information communication provides information to the technician about customers that may request the...
Read full bulletin
factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
Certain vehicles may have a condition in which the Intermediate Steering Shaft Lower Bolt is below torque specification.
Read full bulletin
Dealers will inspect and if necessary, correct the front brake line torque to specification.
This service bulletin provides information for the technicians to use a Customer Concern Verification sheet to...
Read full bulletin
facilitate the questions needing to be answered by the customer regarding Automatic Emergency Braking (AEB) issues.
This Preliminary information communicates an issue with the Hydrastar Electric Over Hydraulic trailer brake system...
Read full bulletin
causing a voltage spike into the trucks electrical system which is causing DTC C1114 to set.
HVAC & Climate
8 bulletinsThis is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
PI to help diagnose A/C concern
This PI provides a diagnostic tip on poor a/c performance due to a condenser issue and instructions to replace the ac...
Read full bulletin
condenser.
This is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
This is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
This is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
This is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
This is a diagnostic PI to assist on a repair to fix a concern for the HVAC temperature doors binding at times
Pre-Delivery & Maintenance
7 bulletinsFixes to help prevent false Service Driver Assist System messages.
Read full bulletin
Improvements to connectivity for OnStar.
This Preliminary information communicates direction to find information at www.gmupfitter.com for Police and Special...
Read full bulletin
Service Vehicles.
This service bulletin provides information to dealership personnel for new vehicles with less than 1,000 miles that may...
Read full bulletin
not pass California smog inspection or smog inspection in other states.
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector...
Read full bulletin
Reconnect Labor Code Numbers.
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance...
Read full bulletin
programs.
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector...
Read full bulletin
Reconnect Labor Code Numbers.
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for...
Read full bulletin
causing multiple customer concerns that do not have other diagnostic methods to identify them.
Fuel System
5 bulletinsImprovements to accuracy for Diesel Exhaust Fluid level shown in driver display.
This PI advised dealer technicians of possible causes of diesel fuel contamination in gasoline powered vehicles and...
Read full bulletin
advises of warranty direction.
This Preliminary information communicates the Heavy Fuel Usage message in the DIC is normal due to low fuel range and...
Read full bulletin
current driving habits, or low fuel range and vehicle is idling.
This warranty administration bulletin provides policy information on vehicles outside of a California Emissions State...
Read full bulletin
who move to and register their vehicle in a California Emission State may be entitled to the 7 year, 70,000-mile Emission Select State Component Limited Warranty.
This informational bulletin instructs the tech when fuel/fluid is needed to be tested and where it can be sent for...
Read full bulletin
analysis.
Transmission
3 bulletinsThis document assists GM dealer technicians with diagnosing torque converter concerns to ensure torque converter replacement is necessary.
Read full bulletin
The torque converter part number will be placed on order restriction, and the technician will be asked to follow 25-NA-148 before requesting a part through PQC.
This PI communicates diagnostic information to assist Technicians with a possible transmission shudder
Fixes to help ensure proper functionality for transmission system.
Read full bulletin
During the update process, your radio may stay on up to 5 minutes after you exit the vehicle. This is expected behavior when an update package is onboard the vehicle. Do not service your vehicle during installation.
Software & Calibration
3 bulletinsThis preliminary PI was created to advise techniians in the field that they will not be able to perform a GDS automated...
Read full bulletin
bleed with the scan tool dues to a issue with the software in the scan tool
This update contains a required software change to help improve the overall software update and diagnostics process.
Read full bulletin
Be sure to install this update to be able to receive future software updates.
This preliminary PI was created to advise techniians in the field that they will not be able to perform a GDS automated...
Read full bulletin
bleed with the scan tool dues to a issue with the software in the scan tool
Tires & Wheels
2 bulletinsThis preliminary information communicates information about how to determine if a wheel and tires size change is...
Read full bulletin
available.
This service bulletin provides information on Tire Sidewall Irregularities.
Air Bags & Safety
2 bulletinsThis Preliminary information communicates how the left lower corner of the DIC is dual purpose and when vehicle is first...
Read full bulletin
started it displays the rear passenger seatbelt indicators and then after a short drive it will change and show the four-wheel drive indicator.
This Preliminary information communicates assistance in locating the Rear seat belt comfort guides in the parts catalog.
Lighting
1 bulletinThis preliminary information communicates an issue with aftermarket LED lighting causing false front park assist alerts...
Read full bulletin
and dealers are to install the factory lighting before performing any in depth diagnostics.