2017 Can-Am Spyder RT TSBs
11 Technical Service Bulletins across 8 categories
Categories
Engine
4 bulletinsRevision of TST 140875 P0730 Active Fault Fault code can be triggered if the unit has the wrong rear sprocket or a different wheel size.
Read full bulletin
The cluster will stop displaying the gear indication and check engine light came on (limp home condition) and the gearbox won't shift.
Engine Oil Level reading Issue Impossible to read the oil level on the dipstick.
Spyder P0730 Active Fault - This fault code can be triggered if the unit has the wrong rear sprocket or a different wheel size.
Read full bulletin
The cluster will stop displaying the gear indication and check engine light came on (limp home condition) and the gearbox won't shift.
Missing or damaged scavenge pump components could lead to poor engine performance on 1330 engines.
Other
1 bulletinThe front sprocket might be stuck on the mainshaft upon disassembly
Tires & Wheels
1 bulletinFront Sprocket Wear- Interim Solution As covered in the SAFETY CAMPAIGN BULLETIN 2019-10, The front sprocket may be...
Read full bulletin
defective and may be subject to premature wear.
Pre-Delivery & Maintenance
1 bulletinSafety Campaign- Front Sprocket Wear- Potential Loss of Propulsion The front sprocket may be defective and may be subject to premature wear.
Read full bulletin
Over time, the vehicle could lose propulsion. If the vehicle loses propulsion, there is an increased risk of a crash.
Infotainment
1 bulletinIf a customer wants to change the radio pre-set channel number and is unable to do so, here is the reason this is...
Read full bulletin
happening.
Electrical
1 bulletinTrailer module may fail.
Brakes
1 bulletinElectric parking brake not holding when applied.
Transmission
1 bulletinCentrifungal clutch vibration.