2018 Can-Am Spyder F3 TSBs
19 Technical Service Bulletins across 11 categories
Categories
Engine
4 bulletinsRevision of TST 140875 P0730 Active Fault Fault code can be triggered if the unit has the wrong rear sprocket or a different wheel size.
Read full bulletin
The cluster will stop displaying the gear indication and check engine light came on (limp home condition) and the gearbox won't shift.
Engine Oil Level reading Issue Impossible to read the oil level on the dipstick.
Spyder P0730 Active Fault - This fault code can be triggered if the unit has the wrong rear sprocket or a different wheel size.
Read full bulletin
The cluster will stop displaying the gear indication and check engine light came on (limp home condition) and the gearbox won't shift.
Missing or damaged scavenge pump components could lead to poor engine performance on 1330 engines.
Electrical
3 bulletinsRevision of the bulletin 2020-7.
Read full bulletin
First version was sent in December 2020. Accessory Port Power Supply Issue Possible Inverted Wires at Vehicle Connector. Vehicles equipped with GPS kit may experience inner battery charging issues. One of the probable cause is inverted wires at vehicle connector.
Trailer module may fail.
GPS Not Charging - Possible Inverted Wires at Vehicle Connector Vehicles equipped with GPS kit may experience inner battery charging issues.
Read full bulletin
One of the probable cause is inverted wires at vehicle connector.
Other
2 bulletinsThe front sprocket might be stuck on the mainshaft upon disassembly
Oil pressure switch switch connector boot cracking.
Pre-Delivery & Maintenance
2 bulletinsSafety Campaign- Front Sprocket Wear- Potential Loss of Propulsion The front sprocket may be defective and may be subject to premature wear.
Read full bulletin
Over time, the vehicle could lose propulsion. If the vehicle loses propulsion, there is an increased risk of a crash.
Warranty Bulletin no 2018-3 Heated Grips Low Performance Vehicle affected by this campaign could have been...
Read full bulletin
manufactured with inverted heated grip connection to terminals causing poor heating efficiency.
Transmission
2 bulletinsClutch assist installation.
Warranty Bulletin no 2018-5 Left Hand Multifunction Switch Malfunction Some multifunction switches (MLS) may be out of...
Read full bulletin
specification preventing the driver to downshift or engage into reverse.
Tires & Wheels
1 bulletinFront Sprocket Wear- Interim Solution As covered in the SAFETY CAMPAIGN BULLETIN 2019-10, The front sprocket may be...
Read full bulletin
defective and may be subject to premature wear.
Lighting
1 bulletinPossible inverted wires at the vehicle accessory port.
Read full bulletin
Functionality issue with GPS support kit and the LED floorboard lights kit
Infotainment
1 bulletinIf a customer wants to change the radio pre-set channel number and is unable to do so, here is the reason this is...
Read full bulletin
happening.
Suspension
1 bulletinDetails on the f3 rear suspension and available options.
Brakes
1 bulletinWarranty Bulletin Spyder RT and F3 - The parking brake may not disengage.
Read full bulletin
On some vehicles, it may take several attempts to disengage the parking brake. In some cases, it may not be possible to disengage brake at all.
Fuel System
1 bulletinWarranty bulletin 2018-4 Large Panoramic 7.8 Wide LCD Display-Software Update Registered Units The following problems...
Read full bulletin
were communicated to BRP - Bluetooth pairing - Fuel average consumption - Music could not be started in the Music App - Impossible to launch or exit apps ect... (see bulletin)