2021 Can-Am Ryker TSBs
10 Technical Service Bulletins across 5 categories
Electrical
3 bulletinsRYKER YAW Rate - SAS Sensor Faults These 3 faults (C0063 and/or C0051 and *C006C) can be triggered if the front...
Read full bulletin
suspension has excessive play or the front wheel alignment is out of specification
Yaw rate sensor faults might be triggered due to loose front suspension components.
This bulletin is the detailed repair procedure if the position light and flasher electrical harness in the front fenders...
Read full bulletin
have rubbed on the tires wearing the insulating sheath.
Other
2 bulletinsUpon installation of the 2-UP passenger seat, difficulty to install might result in the breakage of the latch.
This TST includes solution for the noise that can be heard or felt under deceleration at high speed.
Tires & Wheels
2 bulletinsRyker Vehicle Stability System (VSS) Issues Variation in the front wheel alignment process on the production line can...
Read full bulletin
have an influence on the Vehicle Stability System (VSS) activation.
Message and alert to all dealer RYKER mandatory certification form The front wheel installation is a critical operation...
Read full bulletin
and must be performed as explained in the PDI bulletin.
Engine
2 bulletinsRykers 900 engines that may have the incorrect camshaft timing.
Read full bulletin
Ryker Equipped with the 900 engine may start well when cold but then can have a rough idle or even dies at idle when the engine is warmed up.
Some RYKER MY21 with 903 engines are experiencing misfire Pcode (P0301) around 3800 rpm
Fuel System
1 bulletinFuel Pump can be noisy especially when low fuel levels and warm temperatures.