2026 Buick Envision TSBs
98 Technical Service Bulletins across 13 categories
Categories
Other
27 bulletinsThis preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
This PI provides Diagnostics tips on how the LIN bus works and how to diagnosis it.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary information communicates to the technicians a diagnostic tip if a technician loses communication with...
Read full bulletin
the image processor #2 and how to restore communication
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
This PI states that if SDGM DTC P0604/P0607 is set and no other SDGM DTCs are present, clear DTCs and reset the SDGM.
Read full bulletin
Advises of how to contact PQC to authorize SDGM replacement.
Pi created to provide GM dealers with information on gathering information for projection issue
This Preliminary information communicates to dealer to perform a MEC reset for wireless projection issues
Improvements to the availability of driver assistance features.
This Preliminary information communicates the steps on how to save a GDS2 Session Log and upload to a Technical...
Read full bulletin
Assistance Case in CX Connect.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary Information communicates to dealer how to address a no crank, no start with a P1682
This preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
This preliminary information is for technicians that may see DTCs that are history and should not perform any part replacements.
Read full bulletin
They should follow the notes mentioned prior to anything being replaced.
New Vehicle Monitoring Programs Section in IVH
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary information communicates an issue with super cruise unavailable due to the driver's monitoring camera...
Read full bulletin
and dealers to replace the camera.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
This Preliminary information communicates a diagnostic tip on how to resolve a issue if the serial data authentication...
Read full bulletin
configuration did not complete correctly.
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini...
Read full bulletin
50 terminal test probe, replacement terminals, and terminated leads.
Infotainment
19 bulletinsThis Preliminary information communicates to dealers a procedure to reset the radio.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and...
Read full bulletin
how to reset/clear the message.
Improvements to system responsiveness Improvements to camera image clarity Fixes to prevent blank screens and audio...
Read full bulletin
drop-outs Improvements to vehicle software update installation
Fixes to help prevent loss of functionality for connectivity features such as OnStar, Wi-Fi, Navigation, and Super...
Read full bulletin
Cruise.
This Preliminary information communicates to dealers a procedure to reset the radio.
This Preliminary information communicates to dealers a procedure to reset the radio.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates to dealers a procedure to reset the radio.
This Preliminary information communicates to dealers a procedure to reset the radio.
Fixes to help ensure responsiveness for the driver display and rear view camera.
Read full bulletin
Improvements to reliability for alerts and chimes.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This preliminary information communicates an issue with the key fob buttons inoperative and how to resync the fobs back...
Read full bulletin
to the vehicle.
This Preliminary information communicates to dealers a procedure to reset the radio.
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This PI is to instruct dealer on diagnostic procedures that need to be completed prior to replacing a radio or IPC...
Read full bulletin
display
This Preliminary information communicates an issue with an OTA pending message still displayed after an OTA event and...
Read full bulletin
how to reset/clear the message.
Electrical
17 bulletinsThis Preliminary information communicates the potential for dtc p0494 to be stored in the ECM due to potential software...
Read full bulletin
anomaly
This Preliminary Information is to inform customers to follow diagnostics if resetting, disconnecting the module did not...
Read full bulletin
correct it.
This Preliminary Information is to inform customers to follow diagnostics if resetting, disconnecting the module did not...
Read full bulletin
correct it.
A vehicle may have a service all wheel drive message.
Read full bulletin
Tech is given direction to either reset the module or order a new module with instructions for a part restriction.
This preliminary information is for technicians that will have this message after USB updating the radio.
Read full bulletin
The repair should not involve replacing a module as pressing the reset button will correct this issue.
This Preliminary Information is to inform customers to follow diagnostics if resetting, disconnecting the module did not...
Read full bulletin
correct it.
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC'ss
This P/I is advising that the TCM should not be replaced for DTC P16F4 and to follow the repair instructions.
This PI provides diagnostics tips to dealership techs when trying to diagnose a CAN Bus communication issue after an...
Read full bulletin
event like a lightning strike, battery jump started backwards, failure over the air update, etc.
This P/I is advising that the TCM should not be replaced for DTC P16F4 and to request FSE assistance for a TCM data...
Read full bulletin
pull.
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC's
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC's
This Preliminary information communicates to the field on how to diagnosis a GPS issue with the Telematic module with no...
Read full bulletin
DTC's
The Driver Information Center may display a message of Transport Mode On after the ignition is cycled.
This information provides software update information for the K73 Telematics module to correct the symptoms described.
This Preliminary Information communication provides information to the technician about vehicles that have an...
Read full bulletin
intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, B3935, C0750, C0755, C0760, C0765, and/or C0775.
This service bulletin provides information on the proper Reflective High Temperature Heat and/or Insulating Tape to use...
Read full bulletin
for certain repairs, such as Wiring Harness Repairs.
Engine
13 bulletinsThis Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is currently...
Read full bulletin
investigating.
This Preliminary information describes a condition where engineering is working on a solution to a P0494 DTC stored in...
Read full bulletin
the ECM.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This Preliminary information communicates an issue with the SES MIL and DTC P062B and engineering is currently...
Read full bulletin
investigating.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
This preliminary information is to inform technicians and customers that the voice command will be inoperative when trying to open applications.
Read full bulletin
Engineering is investigating and this PI will be converted to a bulletin when a repair is available.
The document makes technicians aware of a valvetrain tick noise that is created by one or more soft hydraulic valve lash adjusters.
Read full bulletin
The soft lash adjuster concern is due to debris from the valve rocker arm, entering into the lash adjuster. The document instructs the technician to replace all of the lash adjusters and rocker arms in the entire engine if any soft lash adjusters are found.
This preliminary information is to inform technicians that GM is placing the B174W Front View Camera Module (ACP2) on...
Read full bulletin
part restriction due to elevated replacement rates and ongoing engineering investigation. Technicians must not replace the front camera module unless they have: 1.Completed the diagnostic procedure in this PI, and 2.Contacted TAC and received authorization, including the SI document number and specific step that directs camera replacement.
Possibility of the P06DD failing as current or history may have an oil consumption concern
This Preliminary Information communication provides information to the technician about vehicles that have had multiple...
Read full bulletin
repair attempts that are being performed on customers vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
Pre-Delivery & Maintenance
8 bulletinsA vehicle may have a service driver assist message and the technician cannot get the Long Range Radar learn procedure to complete.
Read full bulletin
Tech is directed to drive a city route to complete the procedure.
A vehicle may have a service driver assist message and the technician cannot get the Long Range Radar learn procedure to complete.
Read full bulletin
Tech is directed to drive a city route to complete the procedure.
A vehicle may have a service driver assist message and the technician cannot get the Long Range Radar learn procedure to complete.
Read full bulletin
Tech is directed to drive a city route to complete the procedure.
This service bulletin provides information to dealership personnel for new vehicles with less than 1,000 miles that may...
Read full bulletin
not pass California smog inspection or smog inspection in other states.
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector...
Read full bulletin
Reconnect Labor Code Numbers.
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance...
Read full bulletin
programs.
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector...
Read full bulletin
Reconnect Labor Code Numbers.
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for...
Read full bulletin
causing multiple customer concerns that do not have other diagnostic methods to identify them.
Software & Calibration
3 bulletinsThis preliminary information is to inform technicians and customers that GM is aware of the issue and the vehicle can still be driven.
Read full bulletin
When a repair is available, this PI will be updated.
This Preliminary Information is to inform technicians to not replace any parts at this time and to use the work around provided.
Read full bulletin
When a fix is available, this PI will be updated to a bulletin.
This Preliminary Information is to inform technicians to not replace any parts at this time and to use the work around provided.
Read full bulletin
When a fix is available, this PI will be updated to a bulletin.
Fuel System
3 bulletinsThis PI advised dealer technicians of possible causes of diesel fuel contamination in gasoline powered vehicles and...
Read full bulletin
advises of warranty direction.
This warranty administration bulletin provides policy information on vehicles outside of a California Emissions State...
Read full bulletin
who move to and register their vehicle in a California Emission State may be entitled to the 7 year, 70,000-mile Emission Select State Component Limited Warranty.
This informational bulletin instructs the tech when fuel/fluid is needed to be tested and where it can be sent for...
Read full bulletin
analysis.
Brakes
2 bulletinsImproves traction and stability control when accelerating or on uneven terrain Improves braking and stopping...
Read full bulletin
performance on low-traction surfaces Improves the performance of assisted braking
This service bulletin provides information for the technicians to use a Customer Concern Verification sheet to...
Read full bulletin
facilitate the questions needing to be answered by the customer regarding Automatic Emergency Braking (AEB) issues.
Tires & Wheels
2 bulletinsThis preliminary information communicates information about how to determine if a wheel and tires size change is...
Read full bulletin
available.
This service bulletin provides information on Tire Sidewall Irregularities.
HVAC & Climate
1 bulletinPI to help diagnose A/C concern
Transmission
1 bulletinFixes to help ensure proper functionality for heating and cooling features.
Read full bulletin
Improvements to night mode lights for shifting gears. Fixes for Daytime Running Lamps turning on when set to Off. Fixes to help prevent erroneous missing key messages on driver display. Fixes for accuracy of low tire pressure alert. Fixes for speed threshold for pedestrian alerts. During the update process, your radio may stay on up to 5 minutes after you exit the vehicle. This is expected behavior when an update package is onboard the vehicle. Do not service your vehicle during installation.
Body & Paint
1 bulletinThis Preliminary information communicates a diagnostic tip on how to resolve a issue of the horn sounding when vehicle...
Read full bulletin
doors are being closed and the key in vehicle reminder set to off.
Air Bags & Safety
1 bulletinThis Preliminary information communicates assistance in locating the Rear seat belt comfort guides in the parts catalog.