2026 BMW X7 TSBs
19 Technical Service Bulletins across 10 categories
Categories
Other
5 bulletinsThe center console and front cup holder get noticeably too warm to the touch on long journeys with the interior "Heating...
Read full bulletin
on".
The customer brings vehicle in with one or both of the second row 60/40 split seats in the folded position.The seat does...
Read full bulletin
not respond to any requests from the second seat row seat switch button(s).
Expansion Tank Return
DELIVERY STOP: KSG SUPPLY LINE
Due to an assembly error the upper oil pan screws may not have been torqued correctly.
Infotainment
4 bulletinsAfter replacing the Multifunctional Display (MFD), the Central Information Display (CID) is black.
Read full bulletin
The backlight of the CID is illuminated, and touch function does register an audible sound.
The vehicle may experience various operational issues with the Multifunction Display such as: Intermittent black screen...
Read full bulletin
Permanent black screen Intermittent head unit functions not displayed (i.e., Navigation screen only is black)
The vehicle may experience various operational issues with the infotainment system such as: Resets of the head unit...
Read full bulletin
Delayed start-up of the head unit (longer than 30 seconds) Failed start-up of the head unit Sporadic or permanent problems with navigation Sporadic or permanent Bluetooth connection problems Sporadic or permanent audio problems Sporadic or permanent speech / IPA (international phonetic alphabet) problems Missing displays, radio stations, camera images or applications
RSU availability. The vehicle may experience various operation faults with the infotainment system such as: Resets of...
Read full bulletin
the head unit Delayed start-up of the head unit (longer than 30 seconds) Failed start-up of the head unit Sporadic or permanent problems with navigation Sporadic or permanent Bluetooth connection problems Sporadic or permanent audio problems Sporadic or permanent speech / IPA (international phonetic alphabet) problems Missing displays, radio stations, camera images or applications
Lighting
2 bulletinsDue to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay...
Read full bulletin
happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.
In vehicles equipped with the second row 60% / 40% split seat, the flex cable assembly can come out of the seat rail mechanism (circled).
Read full bulletin
This stops the forwards and backwards travel of the seat.
Body & Paint
2 bulletinsThere are two possible situations (rear left, right or both sides): A.
Read full bulletin
The electric sunshade in the rear door does not function or sticks upon operation, and/or B. The electric sunshade is wavy.
DELIVERY STOP: INSTRUMENT PANEL
Fuel System
1 bulletinA small number of vehicles were produced without the evaporator condensate drain hose being installed.This is not immediately apparent to the customer.
Read full bulletin
However, condensation water that has drained into thefront footwell can cause subsequent damage.
Engine
1 bulletinWhen performing a vehicle test, diagnostic trouble code 8013FE Software run time error is found in theIHKA module.
Read full bulletin
If this fault is set for two consecutive life cycles, it will turn on the check engine light on vehicles with an I-level lower than 24-11-570. This fault memory entry does not cause an impairment of functionality of the automatic air conditioningsystem.
Brakes
1 bulletinThe wheel bearing and the brake disc are not correctly aligned; are not concentric (circled).
Read full bulletin
When applicable work is being performed, it is therefore difficult to remove the wheel bolts from, or fasten them into the wheel bearing hub.
Suspension
1 bulletinControl Arm Return
Air Bags & Safety
1 bulletinIn some situations, an emergency call may be triggered in the vehicle without either the customer pressing the SOS Call...
Read full bulletin
button, or an airbag deployment event. In some cases, the customer may not even be inside the vehicle.
Software & Calibration
1 bulletinStarting from I-level 24-07-500, it is possible that the Automatic Hold function is not automatically storedfor the next journey.
Read full bulletin
The function must be activated again by the driver at the beginning of every trip. After asoftware update to 25-03-500 and higher, this occurs more frequently.