2023 BMW S 1000 XR TSBs
7 Technical Service Bulletins across 5 categories
Engine
2 bulletinsExhaust Camshaft Adjuster Switch Cam
Front and rear wheel speed sensor faults (0x3A1800 and 0x3A1801) appear after the bike is being revvedover 5000 RPM...
Read full bulletin
while still on the side stand, sometimes in conjunction with the side stand fault 0X3A1331. When the engine is revved up while on the side stand, vibrations are sent through the entire motorcycle.This vibration intensity varies from bike to bike. This vibration can cause particular movement between the wheel speed sensor and the sensor ringsdepending on the position of the sensor to the ring. The movement is picked up as rotation speed and iscalled ghost speed. This ghost speed follows the increase in RPMs. 5000 RPM = approx. 12 MPH 10000 RPM = approx. 31 MPH
Other
2 bulletinsCoolant residue found on the oil sump.
Read full bulletin
And/or Coolant level in the expansion tank is too low. It has been found that the oil/coolant pumps are often replaced without there being an actual leak. Due to the design these pumps can drip in small quantities.
CHECK ROCKER ARMS AND REPLACE WHERE NEEDED.
Electrical
1 bulletinThe electrical system of BMW vehicles has been subject to an ongoing development process over the last few years.
Read full bulletin
This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
Lighting
1 bulletinAfter close inspection it has been found that DYNAMIC PRO riding mode cannot be selected with the MODE button, even...
Read full bulletin
though it was enabled in the main menu. It is also not possible to configure the DYNAMIC Pro riding mode.
Pre-Delivery & Maintenance
1 bulletinBMW AG has requested the inspection of all dealer stock of the following part number(s) listed below to ensure the...
Read full bulletin
spacer is conformed to drawing.