2015 BMW R1200 GS TSBs

caliper have loosened in customer vehicles while driving.

catalog for the GS models.

vehicles fitted with option code 0190 "Enduro ASC + Riding Modes" can experience functional problems in the Enduro PRO mode. Effective March 06, 2013, BMW Motorrad has a software solution available. Once the coding plug has been fitted and the software update performed, the customer can use all the riding modes

2018 to end of June 2018, cross-spoked wheels with reduced spoke tension have been produced.

clutch slave cylinder and the braided stainless steel clutch line. The cause is a burr in the clutch slave cylinder which may damage the gasket of the clutch line.

clutch slave cylinder and the braided stainless steel clutch line. The cause is a burr in the clutch slave cylinder which may damage the gasket of the clutch line. A vehicle with high mileage can show signs of gradual impairment of the clutch function. The separating action of the clutch can worsen gradually over a period of time.

with the gearshift assistant (SA X222A) OE, a few faulty gearshift assistants have been installed in the production period from 09/02/2016 to 09/05/2016. Over the service life of the vehicle, there can be impairment of functions up to a loss of function of the gearshift assistants. In the case of a loss of function, a gear change (without the gearshift assistant) is possible only with the actuation of the clutch lever.

After the seat lock cylinder has been replaced with a repair kit, the cylinder does not always stay securely installed.

holder by the threaded fasteners. This can prevent the battery from being charged while the motorcycle is being ridden. If this happens the 'General' warning light shows red and the battery symbol appears in the multifunction display.

The keyless Ride button must be pressed for several seconds to shut the bike down

Due to thicker aluminum handlebar.

This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.

2009)Headlights and rear lights light up intermittently despite the ignition being switched off and the battery charger being connected to the on-board socket.

Contamination or obstruction of the RDC sensor.

For the first time, maintenance positions for the cardan shaft (Driveshaft) are included. NOTICE: 1. The new maintenance schedule is not limited to vehicles affected by the SI 33 02 22 (SERVICE ACTION: Swingarm Drain retrofit and Driveshaft Check), but is valid for all K5x models - including retroactively. In case of retroactive validity (model year 2023 and older), affected customers will be informed about the change. This will be in the form of a direct-to-customer letter with a description of the new maintenance schedule, specific owners manual insert, and consumer warranty book insert. 1. For vehicles affected by SI 33 02 22 (SERVICE ACTION: Swingarm Drain retrofit and Driveshaft Check), this service action must be performed first. All conditions described in this bulletin apply after the open Service Action has been completed. No additional communication is required for K5x models model year 2024 and onwards. Those models have the new maintenance schedule in their owners manual.

This is due to a progrm fault in ISTA/p version 3.56.0.

Early prodction and incorrect integration level.

travel

disk and makes noises.

This is due to condensation and goes away again.

Previously they turned off automatically. Software malfunction.

and wear and tear exacerbated by certain climatic conditions.

a programming abort occurred. Afterwards the vehicle is inoperative and can no longer be started. Repeated programming is not possible with this tversion. Software bug.

k001-15-03-510.