2019 BMW R 1250 RT TSBs
13 Technical Service Bulletins across 6 categories
Engine
4 bulletinsBMW Motorrad is aware of a number of cases in which the screw connections of the Paralever link and/or the rear brake...
Read full bulletin
caliper have loosened in customer vehicles while driving.
The motorcycle will not start.
Read full bulletin
The vehicle battery is empty even though the battery charger was permanently connected to the 12V power socket.
In an effort to continuously improve Motorrad connectivity capabilities, an important software update for the new 10.25?...
Read full bulletin
TFT display is scheduled.
R 1250 RT Motorcycles built on or after March 1, 2021 and equipped with option: ?269A - Preparation Audio System? can be...
Read full bulletin
retrofitted with the audio module.
Other
3 bulletinsFrame and mounting parts
When diagnosing fault codes (0x3A13D7, 0x3A13D9), technicians erroneously condemn the electronic throttle grip, which...
Read full bulletin
analyses show is rarely the culprit.
Special vehicles, Police, for example, should be configured/encoded with ISTA.
Electrical
2 bulletinsThe electrical system of BMW vehicles has been subject to an ongoing development process over the last few years.
Read full bulletin
This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
BATTERY EMPTY DESPITE CHARGER.
Body & Paint
2 bulletinsMultiple factors may cause the driveshaft to become damaged; among them are corrosion in certain parts ofthe driveshaft,...
Read full bulletin
and wear and tear exacerbated by certain climatic conditions.
Multiple factors may cause the driveshaft to become damaged; among them are corrosion in certain parts of the...
Read full bulletin
driveshaft, and wear and tear exacerbated by certain climatic conditions.
Lighting
1 bulletinVehicle goes into emergency operation mode and a warning light illuminates on the instrument cluster.
Suspension
1 bulletinSERVICE ACTION: CHECKING THE THRUST WASHER AND THE REAR AXLE ANTI-ROLL BAR.
Read full bulletin
On vehicles with an incorrect setting of the thrust washer contact between the thrust washer and the sway bar may occur over time. This can lead to corrosion and breakage of the anti-roll bar. Installation error of the right side rear axle thrust washer during manufacturing.