2023 BMW K 1600 GTL TSBs
9 Technical Service Bulletins across 4 categories
Engine
5 bulletinsOn affected vehicles, a clamp on the fuel hose (quick coupling connector to the fuel pump) can happen to be crimped insufficiently.
Read full bulletin
During the motorcycle starting process, the fuel system develops a higher pressure than while riding. This increased pressure during start-up can cause the fuel hose to move on the quick coupling connector and over time could eventually slip off the quick connector coupling. As a consequence, small amounts of fuel can spill under the parked vehicle and the engine will not start.
After close inspection it has been found there was an issue during production of the suspension strut that the...
Read full bulletin
proportional valve in the suspension strut may loosen over the course of the service life. This results in a loss of damping function.
After close inspection it has been found that the Hose clamp on the fuel line may be insufficiently crimped at the...
Read full bulletin
quick connection coupling at the fuel pump. During starting operation, a higher pressure occurs in the fuel system than while driving. Due to this increased pressure during starting operation, the fuel line can move on the quick connection and may slip off the quick connection completely. As a result, small amounts of fuel can leak out and the engine cannot be started.
On affected vehicles, a clamp on the fuel hose (quick coupling connector to the fuel pump) can happen to be crimped insufficiently.
Read full bulletin
During the motorcycle starting process, the fuel system develops a higher pressure than while riding. This increased pressure during start-up can cause the fuel hose to move on the quick coupling connector and over time could eventually slip off the quick connector coupling. As a consequence, small amounts of fuel can spill under the parked vehicle and the engine will not start.
Due to a manufacturing fault, the proportional valve within the suspension strut may come loose over its lifetime.
Read full bulletin
As a result, this can lead to a loss of the damping function.
Electrical
2 bulletinsThe electrical system of BMW vehicles has been subject to an ongoing development process over the last few years.
Read full bulletin
This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
Due to a hardware change to the angular rate sensor, certain sub functions will not be active until after a software...
Read full bulletin
update.
HVAC & Climate
1 bulletinAfter quality inspection it has been found that the reverser control unit PN 61 35 8 524 078 was installed ona number of units.
Read full bulletin
This specific control unit was inadequately manufactured leaving a possibility of corrosionthat could lead to the reverser function failing particularly in more humid climates.
Pre-Delivery & Maintenance
1 bulletinBMW AG has requested the inspection of all dealer stock of the following part number(s) listed below to ensure the...
Read full bulletin
spacer is conformed to drawing.