2008 Audi S8 TSBs
201 Technical Service Bulletins across 16 categories
Categories
Other
45 bulletinsGoogle Maps Street View (NVLW))
This bulletin provides information when the parking assistance provides false warnings.
This bulletin provides general information about the outside air temperature reading.
This bulletin provides information on the VAS 611 015 PICO-NVH tool for professional noise analysis.
This bulletin provides damage assessment guidelines for textile seat covers.
This bulletin provides information for when unauthorized/unjustified DTC memory entries are captured in ODIS test Plans...
Read full bulletin
(Ghost faults).
This bulletin provides information on the additional reporting requirements for safety related inquiries.
Audi Oil Capacity Chart
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
This bulletin provides information on professional noise analysis with the VAS 611 015 PICO NVH Tool.
This bulletin provides instructions for ordering replacement Safety Certification labels or VIN plates.
This bulletin provides information for when the customer advises that there is cracking, grinding, rattling, humming,...
Read full bulletin
whining, or similar interference.
This information bulletin contains a background on the outside air temperature reading.
ATF pan leaks
This is an informational bulletin containing information about the outside temperature reading.
Dealer Communication: Vehicle Sales Reporting, Reinstatement, and Audit Policy
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This bulletin contains instructions for identifying and mixing factory fill coolants.
This bulletin contains instructions for identifying and mixing factory fill coolants.
This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This bulletin contains instructions for determining unexpected Audi presense interventions.
This information bulletin contains a background on the outside air temperature reading.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This special notice is to inform dealers to return the part numbers listed (State of California only).
This information bulletin contains instructions for technicans on how to ensure their TAC call goes smoothly.
Added new graphic to reflect where to find MY 21 information
This information bulletin contains a background on the outside air temperature reading.
This bulletin contains instructions for identifying and mixing factory fill coolants.
This informational bulletin contains instructions on how to use the QR code in a TSB.
This information bulletin contains a background on the outside air temperature reading.
New document 2004-2020 A4 allroad, A6 allroad, A8L, R8 Spyder
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part...
Read full bulletin
numbers going forward.
This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil...
Read full bulletin
change.
This technical bulletin provides instructions for an an error message and updating with an SVM code.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This document contains the Audi oil capacity chart.
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Engine
31 bulletinsIdle speed characteristic during cold start
Idle speed characteristic during cold start
Engine may have reduced performance without significant loss of power or stalling
This bulletin provides information on checking for debris when replacing an engine.
This bulletin provides information on the discontinuation and mixing of Audi-approved engine coolants.
Idenifying and mixing factory fill engine coolants
A deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to...
Read full bulletin
stick, which sets the DTCs.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
Read full bulletin
When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
A deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to...
Read full bulletin
stick, which sets the DTCs.
A deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to...
Read full bulletin
stick, which sets the DTCs.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
Read full bulletin
When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Engine oils that meet Audi Oil Quality Standards.
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not...
Read full bulletin
available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not...
Read full bulletin
available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously.
Read full bulletin
Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously.
Read full bulletin
Drivers who consciously or unconsciously drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. As a result, application of the brake and accelerator pedals at the same time (brake pedal with left foot and accelerator pedal with right foot) results in the following: ? Brake pedal function (normal at all times) overrides any throttle application. ? Diagnostic Trouble Codes (DTCs) will not be stored. ? When the brake pedal is applied while the accelerator is depressed, engine RPMs will return to idle speeds of 1400 RPMs after approximately two seconds. ? When the accelerator is applied while the brake pedal is depressed, the vehicle accelerates slower than usual (reduced engine torque).
This bulletin contains instructions for using the UV additive to find engine oil leaks.
This technical service bulletin reminds the reader to check for metal debris when replacing an engine.
This bulletin contains instructions for using the UV additive to find engine oil leaks.
This bulletin contains instructions for using the UV additive to find engine oil leaks.
Supersedes Technical Service Bulletin Group 01 number 12-57 dated October 29, 2012.
Read full bulletin
Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300C (572F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperatures of the exhaust gas and of the catalyst increase quickly. The afterburning in the exhaust manifold before the catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase, the engine has increased idle speed, may have increased vibrations, and has a different sound characteristic. Depending on conditions, the time of the catalyst heating phase varies.
MIL light on. P2015 sender of intake manifold flap position/air flow control, implausible signal P2020 sender of intake...
Read full bulletin
manifold flap position, intake manifold flap 2, implausible signal. Engine may have reduced performance without significant loss of power or stalling. Check service history to see if the improved ? B? suffix V157 Intake Flap motor has already been installed previously; if yes, only replace the potentiometer seals as described below. The fault entry is made because a linkage of the intake manifold flap adjustment sticks. This is caused by deformed oil seal behind the potentiometers.
Supersedes Technical Service Bulletin Group 01 number 12-51 dated July 18, 2012.
Read full bulletin
Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300C (572F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperature of the exhaust gas and of the catalyst increases quickly. The afterburning in the exhaust manifold before catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase the engine has increased idle speed, may have increased vibrations, and a different sound characteristic. Depending on conditions the time of the catalyst heating phase varies.
Supersedes Technical Service Bulletin Group 01 number 12-55 dated October 22, 2012.
Read full bulletin
MIL on. DTCs are stored in the engine control module (ECM). Engine may have reduced power without significant loss of power or stalling. A deformed oil seal behind the potentiometer causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs. When the potentiometer is removed, the oil seal can be seen.
AUDI: ENGINE, ON SOME VEHICLES, WOULD RUN IRREGULARLY OR HAVE MALFUNCTION INDICATOR LAMP (MIL) ON OR POSSIBLE FILTER...
Read full bulletin
ELEMENT FOR CAMSHAFT ADJUSTMENT VALVE CAN LOOSEN AND IN OIL CIRCUIT, THERE IS NO DAMAGE FROM LOOSENED PARTICLES. MODEL ALL. ALL YEARS. *PE
AUDI: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER.
Read full bulletin
A WARRANTY EXTENSION HAS BEEN ISSUED FOR 10 YRS OR 120, 000 MILES, WHICHEVER OCCUR FIRST, ON EMISSIONS CONTROL SYSTEMS WARRANTY FOR INTAKE MANIFOLD AND FUEL INJECTORS, UNDER SPECIFIC CONDITIONS. MODEL 2008-2011. *PE
AUDI: SOME VEHICLES MAY EXPERIENCE SEVERAL MALFUNCTIONS REGARDING THE INTAKE FLAP MOTOR OR INTAKE MANIFOLD RUNNER...
Read full bulletin
POSITION SENSOR THAT MAY BE INOPERATIVE. *PE
AUDI: MIL ON; ROUGH IDLE; ONE OR MORE OF THE FOLLOWING DTCS ARE STORED-DTC P0300 (RANDOM/MULTIPLE CYLINDER MISFIRE DETECTED); DTC P0301-0312 (CYL.
Read full bulletin
1 MISFIRE DETECTED-CYL.12 MISFIRE DETECTED); ENGINE MAY HAVE REDUCED PERFORMANCE WITHOUT SIGNIFICANT LOSS OF POWER OR STALLING. *PE
AUDI: MIL ON; ROUGH IDLE, ONE OR MORE OF THE FOLLOWING DTCS ARE STORED-DTC P0300 RANDOM/MULTIPLE CYLINER MISFIRE DETECTED; DTC P0301-0312 (CYL.
Read full bulletin
1 MISFIRE DETECTED-CYL. 12 MISFIRE DETECTED); ENGINE MAY HAVE REDUCED PERFORMANCE WITHOUT SIGNIFICANT LOSS OF POWER OR STALLING. *PE
AUDI: ENGINE WILL NOT START WITH POSSIBLE MIL/EPC ON (P0087, P0088, P310B).
Read full bulletin
ENGINE DOESN'T START. THE FOLLOWING DTC ENTRIES MAY BE LOGGED IN THE FAULT MEMORY INDIVIDUALLY OR IN COMBINATION: FUEL RAIL/SYSTEM PRESSURE TOO LOW-P0087; FUEL RAIL/SYSTEM PRESSURE TOO HIGH-P0088; LOW FUEL PRESSURE REGULATION, FUEL PRESSURE OUTSIDE OF TOLERANCE-P310B. *PE
AUDI: MIL LIGHT ON AND DTC P2294 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT), P2295 (FUEL PRESSURE REGULATOR 2 CONTROL...
Read full bulletin
CIRCUIT LOW), P2296 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT HIGH) IN FAULT MEMORY DRIVABILITY IS NOT AFFECTED. WIRING HARNESS TO HIGH PRESSURE PUMP MIGHT BE STRESSED AND TIGHTLY BENT AT THE PUMP CONNECTOR. THE HARNESS ALSO MIGHT BE BENT AROUND SHARP EDGES OF CYLINDER HEAD. NO MODELS LISTED. *PE
Electrical
21 bulletinsi-wire new wiring diagram application
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the...
Read full bulletin
controller, resulting in a reading that is out of tolerance.
A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the...
Read full bulletin
controller, resulting in a reading that is out of tolerance.
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the...
Read full bulletin
controller, resulting in a reading that is out of tolerance.
A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
The customer complains of one or more of the following issues: ? When the vehicle is completely refueled, the vehicle...
Read full bulletin
range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. ? The displayed vehicle range drops inconsistently. ? After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. ? When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. ? There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Low battery charge: excess current draw location
Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with...
Read full bulletin
high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
AUDI: MIL ON AND ONE OR MORE OF THE FOLLOWING DTCS ARE STORED IN THE ECM DATA MEMORY-P310B (LOW PRESSURE FUEL SYSTEM...
Read full bulletin
REGULATION, FUEL PRESSURE OUTSIDE TOLERANCE); P129F OR P008B (LOW PRESSURE FUEL SYSTEM, PRESSURE TOO HIGH); P129E OR P008A (LOW PRESSURE SYSTEM, PRESSURE TOO LOW); P2540 (LOW PRESSURE FUEL SYSTEM, PRESSURE OUT OF RANGE); P0087 (RAIL FUEL PRESSURE SYSTEM, PRESSURE TOO LOW). MODELS A3,4,6,8, S6,8, RS4, Q7, AND TT (2005-2008). *PE
AUDI: DUE TO FUEL INTRUSION INTO THE LOW PRESSURE SYSTEM FUEL PRESSURE SENSOR (G410), A FALSE SIGNAL MAY BE SENT TO THE...
Read full bulletin
CONTROLLER, RESULTING IN A READING THAT IS OUT OF TOLERANCE. COMPARING MEASURE VALUE BLOCK 103 WITH 106 IS NOT AN ACCURATE METHOD TO DIAGNOSE LOW SIDE FUEL PRESSURE SENSOR G410. *PE
AUDI: SOFTWARE VERSION MANAGEMENT (SVM), OPERATING INSTRUCTIONS.
Read full bulletin
SVM IS A PROCESS TO UPDATE THE PROGRAMMING IN FLASHABLE (RE-PROGRAMMABLE) CONTROL MODULES AND/OR TO DOCUMENT CHANGES IN SOFTWARE LEVELS IN AUDI VEHICLES. THIS SYSTEM USES THE VAS 5051B OR VAS 5052 DIAGNOSTIC TOOLS TO SEND VEHICLE SPECIFIC DATA TO THE SVM DATABASE, TO DOWNLOAD INSTRUCTIONS FROM THE SVM DATABASE, AND TO FLASH CONTROL UNITS FOR IDENTIFIED SOFTWARE UPDATES. *PE
AUDI: ONE OR MORE DOOR HANDLE TOUCH SENSORS CANNOT BE USED TO UNLOCK THE VEHICLE DOORS; THROUGH DIAGNOSIS IT HAS BEEN...
Read full bulletin
DETERMINED THAT A DOOR HANDLE TOUCH SENSOR MUST BE REPLACED; OTHER WISE, THE VEHICLE LOCKS FUNCTION NORMALLY, SUCH AS WHEN USING THE REMOTE KEY OR THE INTERIOR LOCK SWITCH. *PE
AUDI: SOFTWARE VERSION MANAGEMENT(SVM) OPERATING INSTRUCTIONS.
Read full bulletin
ITS A PROCESS TO UPDATE THE PROGRAMMING IN FLASHABLE (REPROGRAMMABLE) CONTROL MODULES AND/OR TO DOCUMENT CHANGES IN SOFTWARE LEVELS IN ALL AUDI VEHICLES. *PE
MIL ON (DTC P310B AND/OR P129F) AND ONE OR MORE OF THE FOLLOWING DTCS ARE STORED IN THE ECM DATA MEMORY.
Read full bulletin
*PE
Brakes
17 bulletinsShock absorber leaks: assessment aid
Brake pulsation diagnostic guidelines
Shock absorber leaks: assessment aid
Shock absorber leaks: assessment aid
Shock absorber leaks: assessment aid
This bulletin provides information for when there are noises when braking, and the brake pad thickness is OK.
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
This technical service bulletin provides troubleshooting for brake noise.
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
This informational bulletin provides diagnostic information for brake conditions.
This informational contains an explanation for when the customer hears creaking noises when braking at almost standstill...
Read full bulletin
(crawling when pulling away or briefly before standstill).
This informational bulletin provides diagnostic information for brake conditions.
This bulletin contains repair instructions for leaking shock absorbers.
This informational bulletin contains knowledge on why oil may appear on one or several of the shock absorbers.
This informational bulletin contains technical information for when there is condensation visible on the inside of the...
Read full bulletin
headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
AUDI: ON CERTAIN VEHICLES, USE CALIBRATED TORQUE WRENCH AND NOT TORQUE STICKS, TORQUE EXTENSION BARS AND IMPACT...
Read full bulletin
GUNS/WRENCHES NOT APPROVED FOR USAGE ON WHEEL BOLTS BY MANUFACTURER, THAT CAN CAUSE DAMAGE TO BRAKE, STEERING WHEEL, HUB. MODEL 1995-2014 ALL. *PE
AUDI: SOME VEHICLES MAY LACK POWER OR WILL NOT MOVE AFTER STOP DUE TO SIMULTANEOUSLY DEPRESSING THE BRAKE AND ACCELERATOR PEDALS.
Read full bulletin
*JS
Software & Calibration
16 bulletinsTechnical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
ElsaPro Software update and technical bulletins
Technical bulletins and updates
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM)...
Read full bulletin
software update for any TSB or Update.
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM)...
Read full bulletin
software update for any TSB or Update.
This bulletin contains general instructions for software updates.
Dealer Communication - Vehicle Sales Reporting, Reinstatement, and Audit Policy Update - Effective September 30, 2021
00 Software Version Management (SVM), operating instructions
AUDI: SOFTWARE VERSION MANAGEMENT (SVM) OPERATING INSTRUCTIONS.
Read full bulletin
DETAILING THE GENERAL PROCESS FOR CARRYING OUT A SOFTWARE VERSION MANAGEMENT (SVM) SOFTWARE UPDATE FOR ANY TSB OR REQUIRED VEHICLE UPDATE (RVU). TROUBLESHOOTING INFORMATION IS INCLUDED. *PE
Infotainment
14 bulletinsThis bulletin provides information pertaining to MMI Navigation database concerns.
This bulletin provides information for when the customer has concerns about the navigation route guidance.
This bulletin provides information about obtaining a radio code using ODIS.
This informational bulletin contains instructions for when the message "Audi pre sense currently restricted.
Read full bulletin
See owner's manual" is displayed in the instrument cluster without DTCs.
The navigation DVD or other CD/DVD cannot be ejected.
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
Elsa2Go campaign information is now 100% aligned with ElsaPro.
Read full bulletin
This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time without any discrepancy.
This informational bulletin explains when the range display is empty in the on-board computer.
This technical service bulletin provides troubleshooting for issues with the navigation map database.
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
This informational bulletin explains when the range display is empty in the on-board computer.
Read full bulletin
Also A3 Cabriolet 2015-2021, A3 Sportback 2016-2018, 2005 A4 Cabriolet , 2005-2009 S4 Cabriolet, 2010-2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 S6, 2005 and 2006 A7, 2005-2011 and 2021 S7 2005-2006 and 2021 S8, 2019-2021 E-Tron Quattro
This informational bulletin contains resource information for when the traffic feature is inoperative in the MMI...
Read full bulletin
navigation.
THIS TECHNICAL SERVICE BULLETIN EXPLAINS POSSIBLE CAUSES FOR THE REARVIEW CAMERA TO NOT DISPLAY AN IMAGE.
THIS TECHNICAL SERVICE BULLETIN EXPLAINS POSSIBLE CAUSES FOR THE REARVIEW CAMERA TO NOT DISPLAY AN IMAGE.
Tires & Wheels
11 bulletinsTightening wheel bolts
Tightening wheel bolts
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
Read full bulletin
2015-2020 A3 Cabriolet, 2016-2018 A3 Sportback, 2008-2009 S4 Cabriolet, 2008 and 2010 RS4 Cabriolet, 2018-2020 A5 Sportback, 2010-2012 and 2018-2020 RS5 Cabriolet, 2018-2020 S5 Sportback, 2008 A7, 2008-2011 S7
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
Revision to Tires-rotate: 5K only; added "(except R8)"
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
AUDI: WHEEL BOLTS REQUIRE TORQUE ADJUSTMENT.
Read full bulletin
TORQUE STICKS AND TORQUE EXTENSION BARS ARE NOT APPROVED BY AUDI OF AMERICA, INC. AND SHOULD NOT BE USED TO APPLY TORQUE TO WHEEL BOLTS. ALL AUDI MODELS INCLUDED. *PE
Steering
10 bulletinsSteering wheel shimmy, vibration and/or oscillation
Steering wheel shimmy, vibration and/or oscillation
Steering wheel shimmy, vibration and/or oscillation
Steering wheel shimmy, vibration, and/or oscillation
Steering wheel shimmy, vibration, and/or oscillation
Steering wheel leather damage, all vehicles
Steering wheel shimmy, vibration, and/or oscillation
Steering wheel shimmy, vibration and/or oscillation
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering...
Read full bulletin
wheel isn't heating evenly.
Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel.
Fuel System
10 bulletinsDue to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the...
Read full bulletin
State of Minnesota.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more...
Read full bulletin
conditions.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis.
Read full bulletin
Media files can now be viewed on any smartphone or tablet.
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more...
Read full bulletin
conditions.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis.
Read full bulletin
Media files can now be viewed on any smartphone or tablet.
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more...
Read full bulletin
conditions.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis.
Read full bulletin
Media files can now be viewed on any smartphone or tablet.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
Pre-Delivery & Maintenance
7 bulletinsProduct quality is Announcing a new innovation in technical service bulletins: portable, easy to access videos
This bulletin contains instructions for when the zirconium inserts found to be not firmly attached during service work.
SAFETY RECALLS, COMPLIANCE RECALLS and STOP SALES
This technical service bulletin provides troubleshooting information for the vehicle locking system.
This technical service bulletin provides troubleshooting information for the vehicle locking system.
Recall Reminder Part Labels
This document contains a fluid capacity chart as well as a chart that contains the parts and part numbers needed for...
Read full bulletin
service.
Lighting
6 bulletinsThis bulletin provides information pertaining to when there are foreign objects inside of a headlight or taillight.
When oil is drained through the drain plug, the oil might spill on components around the oil pan area.
Read full bulletin
If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
When oil is drained through the drain plug, the oil might spill on components around the oil pan area.
Read full bulletin
If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
This informational bulletin contains information on the different shading of LED headlights.
Exterior lights, moisture accumulation 2013-2021 A3 Cabriolet, 2016-2018 Sportback, 2004-2005 A4 Cabriolet, 2004-2008...
Read full bulletin
S4 Cabriolet, 2008 RS4 Cabriolet, 2010-2021 A4 allroad, 2018-2021 A5 Sportback, 2010-2012, 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2004-2006 A7, 2004-2011 S7, 2021 RS6 Avant, 2004-2006 S8
VOLKSWAGEN: WARRANTY EXTENSION FOR THE HEADLIGHT BULBS.
Read full bulletin
*RM
Suspension
6 bulletinsThis technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
This bulletin describes the proper procedure to address a clicking or clacking noise from the wheel bearing
This bulletin describes the proper procedure to address a clicking or clacking noise from the wheel bearing
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
This bulletin contains instructions for determining if bushings need to be replaced.
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
Body & Paint
2 bulletinsThis bulletin provides information when the exterior trunk handle is inoperative.
This bulletin provides information when the exterior trunk handle is inoperative.
Transmission
2 bulletinsAs the sump pan gasket settles, the torque of the bolts decreases and the seal may leak.
Read full bulletin
Automatic transmission fluid is leaking at the sump pan gasket.
Supersedes Technical Service Bulletin Group 37 number 11-19 dated January 31, 2011.
Read full bulletin
Automatic transmission fluid is leaking at the sump pan gasket. As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak.
Air Bags & Safety
2 bulletinsThis bulletin contains instructions for additional reporting requirements for safety related inquiries...
Read full bulletin
(airbag/seatbelts, accidents, fire and overheat damage).
This bulletin contains instructions for additional reporting requirements for safety related inquiries...
Read full bulletin
(airbag/seatbelts, accidents, fire and overheat damage.
HVAC & Climate
1 bulletinThis bulletin contains repair instructions for when there is radio static when the rear heater is active.