2016 Audi A5 Cabriolet TSBs
681 Technical Service Bulletins across 17 categories
Categories
Other
156 bulletinsThis bulletin states that technicians are required to report to the manufacturer when a vehicle has flooded, and specify...
Read full bulletin
the height to which the vehicle has been flooded.
This bulletin provides information for reporting safety related information to the manufacturer.
This bulletin provides infomraiton abou the Audi frequency analysis application, which is available in the App Store for...
Read full bulletin
Android and Apple phones.
This bulletin provides information when the license plate mounting bracket threded inserts are stripped.
This bulletin provides information about leather care and seat repair.
This bulletin provides information when the horn sound quality is poor.
This bulletin provides a statement regarding the bottleneck of supply for VW approved oil types VW 504.00 and VW 507.00.
This bulletin provides informatoinw hent here are scratches or a coating on the cover of the instrument cluster, or...
Read full bulletin
particles inside of the housing.
This bulletin provides informaiton when there is a leak on the oil hole between the planetary and the transfer box.
This bulletin provides information when there are noises from the area around the instrument cluster.
This bulletin provides informationwhen noises/vibration are detected from front of vehicle in dynamic mode.
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
This bulletin provides diagnostic information for the vehicle locking system.
This Reporting obligation requests that technicians contact the Technical Assistance Center (TAC) when the diagnostic...
Read full bulletin
tester refers to this reportin gobligation or to TPI 2033392.
This bulletin provides informaiotn about various infortainment system complaints.
This bulletin provides information about where to download the Audi frequency app.
This bulletin provides information when the parking assistance gives false warnings.
This bulletin provides information when the parking assistance gives false warnings.
This TSB provides information when there are noises from the area around the instrument cluster.
This bulletin provides information on the use of the Audi frequencly analysis app, and where the application can be...
Read full bulletin
downloaded.
This bulletin provides information on VIN Plates, Safety Certification labels, and the ordering procedures.
This bulletin provides information regarding contact checks for event memories, intermittent.
This bulletin provides information when the anti-theft alarm activates for no reason, or does not activate.
This bulletin provides information on VIN Plates, Safety Certification labels, and the ordering procedures.
This bulletin provides regarding visual damage for all vehicles.
This bulletin provides informaiton when the license plate mouting bracket threaded inserts are stripped.
This bulletin provides information for when there is a fluid sample request from Product Support.
This bulletin provides information when there is vibration/clacking/boomingnoises when driving due to foreign objects.
This bulletin provides information for when there are scratches or a coating on the cover of the instrument cluster, or...
Read full bulletin
there are particles or insects inside of the housing.
This bulletin provides information when the horn sound quality is poor.
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
This bulletin provides information when the anti-theft alarm activates for no reason, or when the anti-theft alarm does...
Read full bulletin
not activate.
This TSB is a label placement guide as required by CARB for remanufactured parts.
This TSB provides damage assessment guidelines for textile seat covers.
This TSB is a label placement guide as required by CARB for remanufactured parts.
This bulletin provides information about leather care and seat repair.
This TSB provides information when there are visible wires in the interior.
This bulletin provides information when the control functions in the vehicle are restricted.
This bulletin provides informationw hen there are optical defects, scratches, and/or chrome peeling.
This bulletin provides information in circumstances where there are noises/vibration from front of vehicle in dynamic...
Read full bulletin
mode.
This bulletin provides information when the anti-theft alarm activates for no reason, or when the anti-theft alarm does...
Read full bulletin
not activate.
This TSB Provides information when parking assistance provides false warnings.
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
This bulletin provides diagnostic information regarding the locking system.
This bulletin provides information on frequency analysis.
This bulletin provides guidance in order to provid informaiton regarding preparatoin when calling the Audi Technical...
Read full bulletin
Assistnce Center (TAC).
This bulletin offers information about the basic information needed for technical requests for gaerbox complaints.
This bulletin offers information about the basic information needed for technical requests for gaerbox complaints.
This bulletin provides information when there are noises/vibration from the front of the vehicle while in dynamic mode.
This bulletin provides Audi technicians with information to prepare for contact to the Technical Assistance Center...
Read full bulletin
(TAC).
This bulletin provides information when there are scratches or a coating on the cover of the instrument cluster, or if...
Read full bulletin
there are particles inside the housing.
This bulletin provides information for when there is a fluid sample request from Product Support.
This bulletin provides information on the ordering procedures for VIN Plates, and Safety Certification labels.
This bulletin provides information when there are scratches or a coating on the cover of the instrument cluster, or if...
Read full bulletin
there are particles inside the housing.
This bulletin provides information for when there is a fluid sample request from Product Support.
This bulletin provides information on the ordering procedures for VIN Plates, and Safety Certification labels.
This bulletin provides information when there are scratches, or a coating on the cover of the instrument cluster, or...
Read full bulletin
particles in the housing.
This bulletin provides general information regarding outside air temperature readings.
This bulletin provides information when there is noise from around the instrument cluster.
This bulletin provides information when the remote control key is inoperative.
This bulletin provides information for when DTC P0A7D00 is stored.
SERV_ACT - After-Run Coolant Pump - Closure Notice
This bulletin provides information when the parking assistance provides false warnings.
This bulletin provides general information about the outside air temperature reading.
This bulletin provides information for when the license plate mounting bracket threaded inserts are stripped.
This bulletin provides information on the VAS 611 015 PICO-NVH tool for professional noise analysis.
This bulletin provides damage assessment guidelines for textile seat covers.
This bulletin provides instructions regarding unauthorized chip tuning (TD1).
This bulletin provides information for when unauthorized/unjustified DTC memory entries are captured in ODIS test Plans...
Read full bulletin
(Ghost faults).
This bulletin provides information on the additional reporting requirements for safety related inquiries.
Audi Elsa Newsletter
This bulletin provides information on workshop mode with Audi connect vehicles.
This bulletin provides information on professional noise analysis with the VAS 611 015 PICO NVH Tool.
This bulletin provides information for when the washer solvent level warning is on.
This bulletin provides information for when there is noise from the area around the instrument cluster.
This bulletin provides information regarding the Audi advanced key.
This bulletin provides instructions for when the washer level warning is on but the reservoir is full.
This bulletin provides instructions for ordering replacement Safety Certification labels or VIN plates.
This bulletin provides information for when the customer advises that there is cracking, grinding, rattling, humming,...
Read full bulletin
whining, or similar interference.
This information bulletin contains a background on the outside air temperature reading.
This bulletin provides instructions for when the anti-theft alarm has gone off for no reason, or did not go off at all.
Read full bulletin
No DTCs are stored.
This bulletin provides instructions for when the washer solvent level warning is on in the DIS but the washer solvent...
Read full bulletin
level is correct.
This informational bulletin contains instructions on how to download and use the Audi Frequency App.
This bulletin contains information on noises from the instrument cluster installation area.
This bulletin contains instructions for properly cleaning and removing a musty odor from the heating and ventilation...
Read full bulletin
system.
This is an informational bulletin containing information about the outside temperature reading.
Dealer Communication: Vehicle Sales Reporting, Reinstatement, and Audit Policy
This bulletin contains repair instructions for when DTC B145504 with symptom code 7340800.
This informational bulletin contains instructions on how to download and use the Audi Frequency App.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This bulletin contains instructions for identifying and mixing factory fill coolants.
This bulletin contains instructions for identifying and mixing factory fill coolants.
This informational bulletin gives instructions for identifying chip tuning.
This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant...
Read full bulletin
expansion tank cap.
This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.
This information bulletin states to remove the car wash bristle and advise the customer to go somewhere else to prevent...
Read full bulletin
it from occurring again.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This bulletin contains instructions for determining unexpected Audi presense interventions.
This bulletin contains instructions for properly cleaning and removing a musty odor in the vehicle.
This bulletin contains information on noises from the instrument cluster installation area.
This information bulletin contains a background on the outside air temperature reading.
This bulletin contains a cleaning procedure from leftover residue from suction cups or labels.
This bulletin contains instructions for determining if a repair is needed when coolant touches a poly V-belt and/or a...
Read full bulletin
toothed belt.
This informational bulletin contains instructions on how to download and use the Audi Frequency App.
This informational bulletin covers the condition of when license plate mounting bracket threaded inserts are stripped.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This bulletin contains repair instructions for when cables are hanging in view with no DTCs.
This special notice is to inform dealers to return the part numbers listed (State of California only).
This information bulletin contains instructions for technicans on how to ensure their TAC call goes smoothly.
This bulletin contains repair instructions for when DTC B145504 with symptom code 7340800.
Added new graphic to reflect where to find MY 21 information
This information bulletin contains a background on the outside air temperature reading.
This bulletin contains instructions for identifying and mixing factory fill coolants.
This bulletin contains instructions for correcting the phonebook.
This informational bulletin contains instructions on how to use the QR code in a TSB.
Apple car play function.
This bulletin contains instructions for properly cleaning and removing a musty odor in the vehicle.
This bulletin contains information on noises from the instrument cluster installation area.
This information bulletin contains a background on the outside air temperature reading.
This bulletin contains a cleaning procedure from leftover residue from suction cups or labels.
This bulletin contains coding information to correct the "talk button is not available/not used."
New document 2004-2020 A4 allroad, A6 allroad, A8L, R8 Spyder
This bulletin contains instructions for enabling text message notifications through the MMI system.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This bulletin contains instructions for when the anti-theft alarm went off for no reason or did not go off.
Read full bulletin
Includes A3 Cabriolet 2015-2020, 2010-2020 A4 Allroad, 2018-2020 A5 Sportback, RS5 Cabriolet 2010-2012 and 2018-2020, 2018-2020 S5 Sportback, 2010-2011 S7, 2010 S8, 2019-2020 e-tron Quattro.
This bulletin contains coding information to correct the "talk button is not available/not used."
This bulletin contains repair instructions for when DTC B145504 with symptom code 7340800.
Read full bulletin
This document applies to every 2016-2019 Audi Model.
After-Run Coolant Pump
After-Run Coolant Pump repair available.
This informational bulletin contains instructions for setting up and using the SD creator program.
This bulletin contains repair instructions for when DTC B145504 with symptom code 7340800.
This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part...
Read full bulletin
numbers going forward.
This informational bulletin contains instructions for when the Sirius presets are missing with no DTCs.
This news email tells dealers when to perform 19N4 or 19O2
Communication Toolkit for Dealers
The part numbers listed in the document are to be returned if they meet the criteria provided.
This informational bulletin contains instructions for when the Sirius presets are missing with no DTCs.
This bulletin contains instructions for when the Audi connect Gen 2 system is not functioning and there is a "Please...
Read full bulletin
wait.." message.
This informational bulletin contains instructions for when the Sirius presets are missing with no DTCs.
This repair authorization is for special VINs that are part of the Audi on Demand and Audi at Home program.
This is a communication on the targeted allocation process.
This bulletin provides repair instructions for when the rearview camera does not work or flickers with DTC 02283.
This document contains the Audi delivery guidelines checklist.
This document contains the Audi delivery guidelines checklist.
Read full bulletin
This document is in Spanish.
This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil...
Read full bulletin
change.
This technical bulletin provides instructions for an an error message and updating with an SVM code.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant...
Read full bulletin
expansion tank cap.
This is an advance notice for Audi of America employees.
Read full bulletin
This notice contains information for the accessories operations technical bulletin.
This document contains the fluid capacity chart.
This bulletin contains coding information to correct the "talk button is not available/not used."
This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant...
Read full bulletin
expansion tank cap.
Audi connect Gen1 and Gen2 systems: Differences and troubleshooting.
Read full bulletin
The customer has a general concern related to Audi connect. Different features are included with different generations of the Audi connect system. The Audi connect Gen1 system includes all vehicles that utilize a removable plastic SIM card. The Audi connect Gen2 system includes all vehicles that utilize an embedded SIM card. The root cause of all complaints cannot be attributed to the vehicle hardware because of the backend server configurations that need to be correct in order for Audi connect to work. For most sporadic complaints, the issue typically resides with the MBB backend server or with the source data provider (Google, INRIX, etc.), and not with the vehicle. In rare cases, the mobile network operator (AT&T, T-Mobile) can be the cause of the complaint. For most static complaints, the issue can be attributed to the user account subscription or possibly the vehicle hardware.
NEW PUBLICATION
THIS REPAIR AUTHORIZATION IS REQUESTING INFORMATION REGARDING DTC P001600.
Engine
67 bulletinsThis bulletin provides information on the zirconium insercts in the brake piston (ceramic brakes only).
This bulletin provides informaiton when the engine is not running smoothly, misfiring.
This bulletin provides information when there is increased oil consumption; >0.5ltr/1000 km.
This bulletin provides information regarding UV leak additive for finding oil leaks.
This bulletin provides information when there is increased oil consumption; >0.5ltr/1000 km.
This bulletin provides information on the zirconium insercts in the brake piston (ceramic brakes only).
This bulleitn provides information regarding UV Leak additive for finding oil leaks.
This bulletin provides information when the restricted function icon for Audi pre sense is displayed after engine...
Read full bulletin
starts.
This bulletin provides informatin when the engine does not run smoothly at idling speeds.
This bulletin provides information when the MIL is on; DTCs for misfire, air/fuel ratio imbalance, or lean fuel system...
Read full bulletin
stored in the ECM P030000.
This bulletin provides informatin when the engine does not run smoothly at idling speeds.
This bulletin provides informaion regarding zirconium inserts in the bake piston for vehicle equipped with ceramic...
Read full bulletin
brakes.
This bulletin provides information when ther is an Engine: start/stop system fault shown and start/stop system not is...
Read full bulletin
working; mileage below 50 km/32 miles.
This bulletin provides information when there is a fault shown; Engine: start/stop system, and the start system is not...
Read full bulletin
working; mileage below 50 km/32 miles.
This bulletin provides information on checking for debris when replacing an engine.
This bulletin provides information on the discontinuation and mixing of Audi-approved engine coolants.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
Read full bulletin
When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
Read full bulletin
When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
Read full bulletin
When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not...
Read full bulletin
available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously.
Read full bulletin
Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
This bulletin contains instructions for using the UV additive to find engine oil leaks.
This technical service bulletin reminds the reader to check for metal debris when replacing an engine.
This Document informs dealers on the new turbo warranty extension for 2013-2016 A4, 2013-2017 A5/Q5, and 2012-2015 A6...
Read full bulletin
vehicles
This bulletin contains instructions for using the UV additive to find engine oil leaks.
This bulletin contains instructions for using the UV additive to find engine oil leaks.
This bulletin contains repair instructions for when DTC P052E00 is stored with noise coming from the engine compartment.
Supersedes Technical Service Bulletin Group 30 number 11-10 dated December 2, 2011.
Read full bulletin
Clutch is not operating properly. Clutch has a burnt smell. Clutch pedal does not fully return to starting position. Incorrect shifting, the revolutions of clutch plate and engine input shaft differ too much, excessive slipping of the clutch, and when the clutch is pressed and an incorrect lower gear is selected, can result in clutch damage.
This document contains the Audi maintenance schedule.
Read full bulletin
The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014.
Read full bulletin
Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
This bulletin provides information on removing a damaged screen from the non-return valve.
Supersedes Technical Service Bulletin Group 17 number 14-50 dated August 15, 2014.
Read full bulletin
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
Customer vehicle is fitted with unauthorized ECM tuning.
Read full bulletin
All systems on Audi vehicles are engineered to work together using the factory calibrations, which have been extensively tested and validated before the vehicle is released for sale. The Audi warranty coverage is based on the results of developing the vehicle under the factory calibration. If a vehicle is equipped with unauthorized hardware or software tuning, it can cause stress on vehicle components outside of intended design limits, and can cause damage and additional wear. Subsequently, factory powertrain warranty coverage is reduced or voided.
Supersedes Technical Service Bulletin Group 19 number 15-61 dated July 7, 2015.
Read full bulletin
Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Supersedes Technical Service Bulletin Group 17 number 15-63 dated June 2, 2015.
Read full bulletin
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
This document contains the Audi maintenance schedule.
Read full bulletin
First standard maintenance service at 5,000 miles or 1 year after delivery, whichever occurs first. Standard maintenance services thereafter occur at intervals of 10,000 miles or 1 year after the last standard maintenance service, whichever occurs first. First major maintenance service at 15,000 miles or 2 years after delivery, whichever occurs first. Major maintenance services thereafter occur at intervals of 20,000 miles or 2 years after the last major maintenance service, whichever occurs first. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
This document contains the Audi maintenance schedule.
Read full bulletin
First standard maintenance service at 5,000 miles or 1 year after delivery, whichever occurs first. Standard maintenance services thereafter occur at intervals of 10,000 miles or 1 year after the last standard maintenance service, whichever occurs first. First major maintenance service at 15,000 miles or 2 years after delivery, whichever occurs first. Major maintenance services thereafter occur at intervals of 20,000 miles or 2 years after the last major maintenance service, whichever occurs first. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
Supersedes Technical Service Bulletin Group 20 number 15-51 dated October 28, 2015.
Read full bulletin
The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts.
Supersedes Technical Service Bulletin Group 20 number 15-49 dated October 15, 2015.
Read full bulletin
The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts.
The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01).
Read full bulletin
Drivability is not affected. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts. In an effort to gain information, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any potential issues with the condition noted above.
Supersedes Technical Service Bulletin Group 20 number 15-56 dated November 19, 2015.
Read full bulletin
The MIL is on. DTC P046100 (Fuel level sensor, circuit range/performance) is stored in the engine control module (ECM), J623 (address word 01).
Supersedes Technical Service Bulletin Group 20 number 15-53 dated October 29, 2015.
Read full bulletin
The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts. In an effort to gain information, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any potential issues with the condition noted above.
Supersedes Technical Service Bulletin Group 24 number 14-50 dated August 28, 2014.
Read full bulletin
The engine judders or runs erratically. The vehicle judders during acceleration. No event entry is stored in the engine control module (ECM). The air mass meter is suspected to be faulty. Possible incorrect function on the sensor elements of the air mass meter.
Supersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013.
Read full bulletin
Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off). No DTCs are stored. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition.
Supersedes Technical Service Bulletin Group 00 number 13-49 dated May 14, 2013.
Read full bulletin
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Supersedes Technical Service Bulletin Group 19 number 13-41 dated June 20, 2013.
Read full bulletin
Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Supersedes Technical Service Bulletin Group 17 number 14-53 dated November 7, 2014.
Read full bulletin
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
Supersedes Technical Service Bulletin Group 01 number 13-69 dated February 14, 2013.
Read full bulletin
Noises and inconsistent engine operation after cold start during the catalyst heating phase. The customer may misinterpret these symptoms as engine misfiring. This bulletin applies only to non-diesel engines.
Supersedes Technical Service Bulletin Group 87 number 14-54 dated August 28, 2014.
Read full bulletin
There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this bulletin can be performed.
Supersedes Technical Service Bulletin Group 17 number 13-35 dated January 9, 2013.
Read full bulletin
This bulletin lists engine oils that meet Audi oil quality standards (VW 501 01, 502 00, 505 00, 505 01, and 504 00/507 00).
Supersedes Technical Service Bulletin Group 10 number 13-10 dated September 5, 2013.
Read full bulletin
Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these metal debris pieces are not removed prior to the installation and operation of the replacement engine, they could be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Supersedes Technical Service Bulletin Group 01 number 13-09 dated June 21, 2013.
Read full bulletin
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in excessive accumulation of deposits on intake valves, intake manifold, fuel injectors, and combustion chambers, engine running rough after cold start, excessive engine cranking time, hesitations while driving, rough engine idle, Reduced engine performance, and/or Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire, lean fuel system, or air/fuel ratio imbalance in the engine control module. Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
This document contains the Audi vehicle detail report checklist.
Read full bulletin
DO NOT use accessories (radio, etc.) while performing detail, as this can discharge the battery. Refer to TSB 2009967 for Detailer responsibilities, specific use of chemicals, and for part numbers to order materials. Only operate power convertible top with engine running to conserve battery power (A5/S5 Cab, R8 ONLY). DO NOT allow convertible top to remain in a partially opened or partially closed position for longer than 5 minutes. This will cause the top to stop functioning and will require service (A5/S5 Cab, R8 ONLY). DO NOT treat vehicle parts painted with matte finish paint using polishing materials or hard wax. NEVER use protective wax. It can destroy the matte finish effect. Only use a microfiber cloth for cleaning (R8 ONLY).
This document contains the Audi vehicle detail report checklist.
Read full bulletin
DO NOT use accessories (radio, etc.) while performing detail, as this can discharge the battery. Refer to TSB 2009967 for Detailer responsibilities, specific use of chemicals, and for part numbers to order materials. Only operate power convertible top with engine running to conserve battery power (A5/S5 Cab, R8 ONLY). DO NOT allow convertible top to remain in a partially opened or partially closed position for longer than 5 minutes. This will cause the top to stop functioning and will require service (A5/S5 Cab, R8 ONLY). DO NOT treat vehicle parts painted with matte finish paint using polishing materials or hard wax. NEVER use protective wax. It can destroy the matte finish effect. Only use a microfiber cloth for cleaning (R8 ONLY). This document is in Spanish.
This bulletin contains repair information for the camshaft bearing bridfe when it has over .2mm end play.
This bulletin contains repair information for the camshaft bearing bridfe when it has over .2mm end play.
Customer reports seeing the messages "TPMS" and "Tire pressure: System malfunction!" in the instrument cluster.
Read full bulletin
This occurs after the engine is started, the message "TPMS" appears briefly and then turns off. There are no DTCs stored.
A small amount of dry or crusted coolant is seen on the coolant pump housing.
Read full bulletin
The coolant level warning is not on. A minor coolant leak is possible during the break-in phase of the coolant seal on the coolant pump. The dry coolant marks are normal.
MIL on (DTC P045600 - EVAP system leak detected NVLD (very small leak)) - Repair Authorization.
Read full bulletin
DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected.
The MIL is sporadically on.
Read full bulletin
One or more of the following DTCs is stored in the engine control module (ECM, J623 (address word 01). They are DTC P261A00 (Coolant Pump ?B? Control Circuit/Open), DTC P261B00 (Coolant Pump ?B? Control Circuit Range/Performance), and DTC P261C00 (Coolant Pump ?B? Control Circuit Low). The continued coolant circulation pump sporadically fails.
THIS TECHNICAL SERVICE BULLETIN EXPLAINS HOW TO DIAGNOSE AND REPAIR ISSUES WITH THE INTAKE MANIFOLD FLAP VALVE N316.
THIS TECHNICAL SERVICE BULLETIN EXPLAINS HOW TO DIAGNOSE AND REPAIR ISSUES WITH THE INTAKE MANIFOLD FLAP VALVE N316.
THIS TECHNICAL SERVICE BULLETIN NOTIFIES THE READER THAT IF THE TPMS MESSAGE APPEARS BRIEFLY AFTER THE ENGINE IS STARTED...
Read full bulletin
AND THEN DISAPPEARS, IT DOES NOT INDICATE AN ISSUE WITH THE TPMS SYSTEM.
THIS TECHNICAL SERVICE BULLETIN EXPLAINS HOW TO DIAGNOSE AND REPAIR ISSUES WITH THE INTAKE MANIFOLD FLAP VALVE N316.
THIS TSB IS A REPAIR AUTHORIZATION FOR DTC P001600 (CRANKSHAFT/CAMSHAFT CORRELATION) STORED IN THE ECM.
THIS TSB IS A REPAIR AUTHORIZATION FOR DTC P001600 (CRANKSHAFT/CAMSHAFT CORRELATION) STORED IN THE ECM.
THIS BULLETIN PROVIDES INFORMATION ON REMOVING A DAMAGED SCREEN FROM THE NON-RETURN VALVE.
Electrical
63 bulletinsThis bulletin provides informaiotn when the starter battery is discharged or defective.
The high-voltage batteries in electric vehicles are subject to various ageing effects which could lead to the energy...
Read full bulletin
content (energy density) being reduced. This reduction in the energy content, which is due to factors. Revised header. Added Model years
This bulletin provides informaiotn when the starter battery is discharged or defective.
This bulletin provides informaiotn when the starter battery is discharged or defective.
This bulletin provides informaiotn when the starter battery is discharged or defective.
This bulletin provides information when the Emergency call LED in the roof module is not lit up green.
This bulletin provides additoinal information to assist in determining the energy content of lithium-ion high-voltage...
Read full bulletin
batteries.
This bulletin provides information when the Emergency call LED in the roof module is not lit up green.
This bulletin provides information for wire harness repairs and documentation.
This is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle...
Read full bulletin
programming function: The hotfix is to correct the issue: Issue seen: ODS5003E Infrastructure Guided Fault Finding: An internal fatal error occurred during the G929 - Vehicle Interior Carbon Dioxide Concentration Sensor function test plan. NOTE: This ODS error could show up on any other GFF function test plans as well.
This TSB provides information when the Audi advanced key is inoperative; door handle touch sensors.
This bulletin provides service-info relating to lithium-ion high-voltage batteries; determining energy content.
This bulletin provides service-info relating to lithium-ion high-voltage batteries; determining energy content.
This bulletin provides service-info relating to lithium-ion high-voltage batteries; determining energy content.
This bulletin provides information when the airbag warning light is on, DTC B13BCF2 stored in the airbag control module.
This bulletin provides information when the airbag warning light is on, DTC B13BCF2 stored in the airbag control module.
This bulletin provides information when the door handle touch sensors for Audi advanced key are inoperative.
This bulletin provides information when the door handle touch sensors for Audi advanced key are inoperative.
This bulletin provides information for when the airbag warning light is on and DTC B13BCF2 is stored in the airbag...
Read full bulletin
control module.
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
Customer vehicle is fitted with unauthorized ECM tuning.
This informational bulletin provides an explanation for the customer regarding known software issues with the MIB &...
Read full bulletin
MMI3G+ bluetooth security profile.
This bulletin contains repair instructions for when DTC B145504 with symptom code 7340800.
Read full bulletin
48 Steering wheel heater is not working, DTC B145504 is stored in the steering column control module.
This technical service bulletin provides instructions for replacing the rear camera wiring harness.
This technical service bulletin provides instructions for replacing the rear camera wiring harness.
Major Maintenance Section: CHANGED: "(except Audi A3 e-tron)" to (Audi A3 etron only)" at the end of "Cooling system...
Read full bulletin
for electrical components: Check coolant level according to description in ElsaPro" ADDED: "(except A3 e-tron)" at the end of "Cooling system - Check coolant level and add coolant if necessary"
This technical service bulletin provides instructions for replacing the rear camera wiring harness.
This informational bulletin provides an explanation for the customer regarding known software issues with the MIB &...
Read full bulletin
MMI3G+ bluetooth security profile.
Supersedes Technical Service Bulletin Group 91 number 14-46 dated June 25, 2014.
Read full bulletin
Adaptive Cruise Control (ACC) does not work. The message "ACC no sensor vision" appears in the cluster. DTCs are logged in the distance regulation control module.
This document contains the Audi pre-delivery inspection checklist.
Read full bulletin
All items must be completed prior to customer delivery by an Audi technician. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.This document is in Spanish.
Supersedes Technical Service Bulletin Group 91 number 15-80 dated March 20, 2015.
Read full bulletin
The addresses and contacts stored in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus disappear intermittently. Intermittently, the MMI system does not appear to remember that the user?s myAudi PIN has already been entered, and it requires the user to enter the PIN again. The voice recognition system does not easily recognize commands spoken by the driver. This condition can be consistent or intermittent. If a user stores addresses and contacts in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus while a Bluetooth phone is paired to the vehicle, those addresses and contacts will only be visible any time that the same phone is paired to the vehicle. Any time that the same phone is not paired to the vehicle, the addresses and contacts will not be available. If a user stores addresses and contacts in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus while a Bluetooth phone is not paired to the vehicle, the addresses and contacts will be available any time. In vehicles with Audi connect, the user is prompted to enter the myAudi PIN when selecting online destinations, accessing weather or other online information, or when importing contacts from the myAudi account. If the user?s Bluetooth phone (the same phone that was paired to the vehicle when the PIN was entered initially) is paired to the vehicle, the user will not be prompted to re-enter the PIN after it has been entered. 2016 A6 and A7 vehicles have a known software issue that requires the myAudi PIN to be entered with each ignition cycle. Multiple voice recognition training sessions can be stored in the MMI for different users when different phones are Bluetooth-paired during each training session. If no phone is paired, the training session will be stored under a default profile. Thi
This informational bulletin provides an explanation for the customer regarding known software issues with the MIB &...
Read full bulletin
MMI3G+ bluetooth security profile.
Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with...
Read full bulletin
high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
This informational bulletin contains instructions for sychronizing the remote key after the battery has been...
Read full bulletin
disconnected or replaced.
This informational bulletin contains information on why ACC sensor could be deactivated.
Supersedes Technical Service Bulletin Group 91 number 13-74 dated February 5, 2013.
Read full bulletin
Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
Supersedes Technical Service Bulletin Group 57 number 13-86 dated March 20, 2013.
Read full bulletin
The exterior door handle touch sensors (Audi advanced key) are inoperative on one or several doors. The key blade can be used mechanically (driver door or trunk) or remote electrically (key remote buttons) to unlock and lock the vehicle.
This document contains the Audi pre-delivery inspection checklist.
Read full bulletin
All items must be completed prior to customer delivery by an Audi technician. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection. ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI function tests. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.
Supersedes Technical Service Bulletin Group 96 number 13-67 dated July 10, 2013.
Read full bulletin
The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer?s door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 model years 2005?2006 and A3 model year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer?s HomeLink opener system is using an alternate code. The handheld transmitter?s programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
Supersedes Technical Service Bulletin Group 17 number 14-49 dated April 3, 2014.
Read full bulletin
When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. The displayed vehicle range drops inconsistently. After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Supersedes Technical Service Bulletin Group 69 number 12-22 dated February 13, 2012.
Read full bulletin
After the comfort system central control module, J393 (address word 05) is replaced, the control module cannot be coded via SVM spec/actual. Any time a comfort system central control module, J393 (address word 05), is replaced, the new control module must be coded and parameterized with online SVM spec/actual or an SVM code. If the SVM spec/actual returns a response of ?Check Hardware?, then an SVM code is required to code and parameterize the new control module. The SVM code can be found in Parts Bulletin 9-101, which can be found on the etkainfo.com web site.
Supersedes Technical Service Bulletin Group 57 number 13-97 dated October 29, 2013.
Read full bulletin
The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle ?locked itself?. The lock command history is stored in the convenience system control module (J393).
Supersedes Technical Service Bulletin Group 91 number 14-50 dated July 10, 2014.
Read full bulletin
Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
The navigation function is not available, and the message ?The navigation data are not activated? appears in the MMI.
Read full bulletin
DTC B126CF2 (Navigation system navigation database not enabled) is set in the information electronics control module, J794 (address word 5F). Navigation is a feature of the MMI that requires a license activation using SVM. The process is handled by the gateway and the MMI inside the vehicle. In some instances, the feature can be affected if the gateway is placed into ?Component Protection Showroom Mode? or if the gateway and MMI lose communication with each other. As a result, either the license activation must be performed again online using SVM or the component protection removal must be performed.
Update ECM software to improve diagnostic of NVLD system.
Supersedes Technical Service Bulletin Group 94 number 14-32 dated January 23, 2014.
Read full bulletin
The light bulb warning light is displayed in the instrument cluster with the following message: "Vehicle lights: malfunction". DTCs are stored in the vehicle electrical system control module. Exterior lights are functioning properly.
Steering angle sensor cannot be programmed.
Read full bulletin
The steering angle sensors cannot be calibrated and the steering end stops cannot be adapted on a vehicle with dynamic steering.
Supersedes Technical Service Bulletin Group 97 number 10-15 dated October 20, 2010.
Read full bulletin
Sporadic fault memory entries are stored in various control modules. Contacts may be widened (over 0.63 mm) if incorrect pins or incorrect methods for current flow tests are used. Either action may cause intermittent electrical connections, which can cause sporadic DTCs to be stored in various control modules.
When a phonebook with a large number of contacts is being downloaded, the MMI screen freezes Briefly after the initial...
Read full bulletin
Bluetooth connection (shortly after the phone is bonded to the vehicle), after the ignition is switched on (shortly after the phone automatically reconnects with the vehicle), and after the phonebook has downloaded. When the voice recognition system is used, a message appears in the MMI screen stating that the phone book is too large and that the voice recognition system cannot be used. When music is streamed to the MMI system with the Bluetooth A2DP connection, the music intermittently pauses or seems to skip. The condition goes away once the phonebook transfer is completed. The MMI uses a limited portion of the total memory to convert the name and phone number fields of downloaded contacts into a voice command (text to speech). Extensive processing takes place if too many letters are used in the first and last name fields or if numbers or special characters are entered. The remaining memory is dynamically assigned to different applications which can also affect the capacity of the voice command processing. The MMI does not respond until the process is completed or it may freeze if phonebook fields are too large or do not follow typical formatting. In addition, the text-to-speech capacity is exceeded and the voice recognition system is rendered inactive.
Supersedes Technical Service Bulletin Group 94 number 15-60 dated February 12, 2015.
Read full bulletin
The light bulb warning light is displayed in the instrument cluster with the following message: "Vehicle lights: malfunction". DTCs are stored in the vehicle electrical system control module. Exterior lights are functioning properly.
This technical service bulletin provides instructions for replacing the rear camera wiring harness.
Update ECM software to improve diagnostic of NVLD system.
Read full bulletin
Bulletin revised to update claiming instructions.
The message "Oil minimum warning, add one quart of oil" appears in the instrument cluster, but the oil level is above the minimum level.
Read full bulletin
There are no DTCs related to oil level stored in the ECM memory. The oil level sensor is defective.
MIL on; (DTC P046100 - Fuel level sensor, circuit range/performance).
Read full bulletin
MIL is on during normal driving conditions, city or highway at any speed.
THIS TECHNICAL SERVICE BULLETIN PROVIDES INSTRUCTIONS FOR REPLACING THE REAR CAMERA WIRING HARNESS.
THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO UPDATE THE ECM SOFTWARE TO RESOLVE AN ISSUE THAT CAUSES DTC...
Read full bulletin
P046100.
Infotainment
58 bulletinsThis bulletin provides information about voice recognition performance, and bluetooth call quality issues on the other...
Read full bulletin
end of the line.
This bulletin provides information when there are speaker rattles, vibrations, or audio interference.
This bulletin provides sevice info regarding the bluetooth connection with an Apple iPhone.
This bulleitn provides information whent here are complaints about route guidance with Navigation.
This bulletin provides tips for improving the robustness of the Bluetooth and CarPlay connection.
This bulletin provides information when a customer reports that poor voice quality via bluetooth with iOS 18.0.x -...
Read full bulletin
18.4.x.
This bulletin provides information regarding various comlaints related to Apple CarPlay with Apple iOS devices.
This bulletin provides information when speaker rattles, vibrations, or audio interference is noted.
This bulletin proves information when the bluetooth does not work, adaption channel deactivated.
This bulletin proves information when the bluetooth does not work, adaption channel deactivated.
This bulletin provides informaiton when there are speaker rattles, vibrations or audio interference in the sound system.
This bulletin provides informaiton when there are speaker rattles, vibrations, or audio interference.A1
This bulletin provides information when there are speaker rattles, vibration or audio interference.
This bulletin provides informaiton when there are speaker rattles, vibrations, or audio interference.A1
This bulletin provides information when there are speaker rattles, vibration or audio interference.
This bulletin provides information pertaining to MMI Navigation database concerns.
This bulletin provides information for when the customer has concerns about the navigation route guidance.
This bulletin provides information on how to update the navigation map.
This bulletin advises that the MMI screen may freeze, or go blank and then restart when a special character like a...
Read full bulletin
symbol or emoticon is used in the name field for contact(s).
This bulletin states that due to a software malfunction in Apple iOS Version 16.0.x there are restrictions with...
Read full bulletin
bluetooth connection.
This informational bulletin contains instructions for when the message "Audi pre sense currently restricted.
Read full bulletin
See owner's manual" is displayed in the instrument cluster without DTCs.
This informational bulletin contains instructions about updating the navigation map.
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
Elsa2Go campaign information is now 100% aligned with ElsaPro.
Read full bulletin
This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time without any discrepancy.
This informational bulletin contains instructions about updating the navigation map.
This bulletin contains repair instructions for voice recognition or Bluetooth quality issues that are related to the...
Read full bulletin
microphone.
This bulletin contains a guide for troubleshooting HD radio issues.
This informational bulletin contains instructions about updating the navigation map.
This informational bulletin explains when the range display is empty in the on-board computer.
This technical service bulletin provides troubleshooting for issues with the navigation map database.
This informational bulletin contains instructions for when a phone is connected to the vehicle via Bluetooth, one of the...
Read full bulletin
following conditions occurs when the user searches for a contact name in the MMI address book (by using the MMI control knob or the voice recognition system): *The MMI screen goes blank then restarts. *The MMI screen freezes for a few minutes then recovers.
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
This informational bulletin explains when the range display is empty in the on-board computer.
Read full bulletin
Also A3 Cabriolet 2015-2021, A3 Sportback 2016-2018, 2005 A4 Cabriolet , 2005-2009 S4 Cabriolet, 2010-2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 S6, 2005 and 2006 A7, 2005-2011 and 2021 S7 2005-2006 and 2021 S8, 2019-2021 E-Tron Quattro
On Audi A4, A5 and Q5 vehicles manufactured within a specific period, the service interval display does not show all parameters.
Read full bulletin
As a result, the number of days remaining until the next service is due are not displayed correctly.
On Audi A4, A5 and Q5 vehicles manufactured within a specific period, the service interval display does not show all parameters.
Read full bulletin
As a result, the number of days remaining until the next service is due are not displayed correctly.
On Audi A4, A5 and Q5 vehicles manufactured within a specific period, the service interval display does not show all parameters.
Read full bulletin
As a result, the number of days remaining until the next service is due are not displayed correctly.
This technical service bulletin provides software update instructions for resolving an error that causes the error...
Read full bulletin
message: "navigation data is invalid".
This informational bulletin contains resource information for when the traffic feature is inoperative in the MMI...
Read full bulletin
navigation.
This informational bulletin contains procedure information for DTC 00468 with error messages on the radio display.
The following message appears on the MMI display: ?Device or cable type not supported?.
Read full bulletin
The ?Device or cable type not supported? message may be displayed when the wrong AMI cable type is used. See the Service section of this bulletin for an overview of the AMI cables that support iOS devices.
Supersedes Technical Service Bulletin Group 91 number 13-08 dated September 20, 2013.
Read full bulletin
The customer would like to add a different navigation map database for countries outside of the USA or Canada. The customer would like to change the MMI system language to a different language that is not already supported by MMI. When a song is being played and the track information for that song contains foreign language characters, the driver information system (DIS) in the cluster correctly displays the characters, but the MMI display does not.
Supersedes Technical Service Bulletin Group 91 number 14-24 dated January 24, 2014.
Read full bulletin
The Audi MMI system will not play audio files from an SD card. The MMI system does not recognize the audio files on the SD card. The MMI system reports that the audio files on the SD card are damaged. The audio files on the SD card will play on one Audi vehicle, but will not play on a different Audi vehicle. The vehicle is equipped with RNS-E, Concert Radio with SD card slot, MMI3G, MMI3G+, or MIB.
While using Audi connect, the customer cannot access the online destination search and/or the Google Earth navigation view.
Read full bulletin
?This service is currently unavailable. Please try again later" message appears in the MMI. The customer may also see an error message in the myAudi portal indicating that one or multiple licenses are expired and must be renewed. Replacing the SIM card or MMI hardware or performing the SVM recovery activation will not remedy the concern.
Supersedes Technical Service Bulletin Group 91 number 13-04 dated September 11, 2013.
Read full bulletin
The Bluetooth telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
Supersedes Technical Service Bulletin Group 91 number 15-17 dated September 29, 2015.
Read full bulletin
While using Audi connect, the customer cannot access the online destination search and/or the Google Earth navigation view. The following message appears in the MMI: ?This service is currently unavailable. Please try again later.? The customer may also see an error message in the myAudi portal indicating that one or multiple licenses are expired and must be renewed. Additionally, if the vehicle is a model year 2016 A6, A7, or TT, the customer may not be able to see speed and flow traffic information in the navigation map screen, and may consistently see that no traffic reports are available. For these vehicles, traffic is provided by INRIX online.
The traffic feature in the MMI navigation is inoperative.
Read full bulletin
If the vehicle is a model year 2016 A6 or A7, see TSB 2042013: 91 Audi connect online destination search, Google Earth navigation view, or INRIX online traffic is not available. There is a known server issue that can only be resolved through a change to the Audi AG backend server. Audi has changed traffic providers over the years as new technologies have developed. This bulletin provides an overview of the different systems and the basic checks that can be performed to diagnose complaints related to traffic in the MMI navigation system.
Supersedes Technical Service Bulletin Group 91 number 12-46 dated July 10, 2012.
Read full bulletin
This Technical Bulletin provides an overview of HD Radio technology and terminology. The
Supersedes Technical Service Bulletin Group 91 number 13-87 dated June 19, 2013.
Read full bulletin
The MMI control knob joystick is loose or has fallen off. Only vehicles with navigation and without MMI touch are affected.
Supersedes Technical Service Bulletin Group 91 number 13-92 dated July 16, 2013.
Read full bulletin
The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone receives the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call because it assumes that the phone is not responding.
Supersedes Technical Service Bulletin Group 96 number 13-71 dated July 22, 2013.
Read full bulletin
The customer complains that after the vehicle is started, the name of the current radio station or media track is not shown in the driver information system (DIS). After the music input is changed to a different source and then changed back (i.e., media to radio to media or radio to media to radio), the radio station or media track information is shown in the DIS. Incorrect software.
The navigation map update database 8R0051884CJ cannot be activated using Software Version Management.
Supersedes Technical Service Bulletin Group 91 number 14-30 dated April 7, 2014.
Read full bulletin
On generation III Concert and Symphony radios, the control knob or volume knob is broken or loose. Knobs may be damaged by outside influence.
Supersedes Technical Service Bulletin Group 91 number 12-42 dated June 20, 2012.
Read full bulletin
The customer complains about the picture quality of rearview backup camera image in the MMI screen. The picture is fuzzy or distorted. The picture looks too bright, too dark, or opaque in certain areas of the image. The colors of the objects in the image are incorrect or slightly off. The guidelines used for parking are fuzzy, distorted, or pixelated when compared with the guidelines displayed on another vehicle?s MMI.
Supersedes Technical Service Bulletin Group 91 number 14-27 dated March 4, 2014.
Read full bulletin
The addresses and contacts stored in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus disappear intermittently. Intermittently, the MMI system does not appear to remember that the user's myAudi PIN has already been entered, and it requires the user to enter the PIN again. The voice recognition system does not easily recognize commands spoken by the driver. This condition can be consistent or intermittent. Multiple voice recognition training sessions can be stored in the MMI for different users when different phones are Bluetooth-paired during each training session. If no phone is paired, the training session will be stored under a default profile. This profile will be used each time the voice recognition system is used without a phone being paired to the MMI. This TSB is informational only and not applicable to any Audi warranty.
Supersedes Technical Service Bulletin Group 91 number 14-69 dated November 4, 2014.
Read full bulletin
The following message appears on the MMI display: "Device or cable type not supported". The AMI cable being used is a genuine Audi-branded cable with an Audi part number (see Required Parts and Tools for a list of valid part numbers). The "Device or cable type not supported" message may be displayed when an incorrect AMI cable type is connected to the MMI system. Only cables with an Audi part number (i.e., 4F0.XXX.XXX) are supported by the MMI system. Volkswagen-branded cables look similar, but are not guaranteed to work with Audi MMI systems. The label on the end of an Audi-branded cable has an Audi logo and Audi part number. Audi-branded cables have unique firmware inside the hardware that can determine which MMI system and iOS device are connected to the cable. Volkswagen cables do not have this firmware. The firmware is required to allow the system to function normally due to the different technology available in the different MMI systems and in the different iPhones and iPod Touch devices. In addition, the AMI system was designed to play the music stored locally on the connected device only. Music streaming (from Spotify or Pandora, for example) is not supported, and music stored in the cloud (on Google Play, Amazon Prime, or iTunes Match/iCloud, for example) may drop out, pause, and skip when played.
Supersedes Technical Service Bulletin Group 91 number 08-129 dated November 12, 2008.
Read full bulletin
Customer states that the reception of satellite radio occasionally fades or drops out. The information display may show a message related to the satellite radio, such as "Linking", "Updating", "Acquiring Signal", "Loading", "No Signal", or "No Sat".
THIS TECHNICAL SERVICE BULLETIN PROVIDES SOFTWARE UPDATE INSTRUCTIONS FOR RESOLVING AN ERROR THAT CAUSES THE ERROR...
Read full bulletin
MESSAGE: "NAVIGATION DATA IS INVALID".
THIS BULLETIN PROVIDES SOFTWARE UPDATE INFORMATION FOR THE MMMI 3G OR RMC FOR NAVIGATION DATA.
Brakes
45 bulletinsThis bulletin provides information about the general approach for brake vibration concerns.
This bulletin provides information when there is an ABS/ESC speed sensor implausible signal.
This bulletin provides information for all models regarding brake sounds.
This bulletin provides information when there is corrosion on the friction survace of steel brake discs.
This bulletin provides information for all models regarding brake sounds.
This bulletin provides information regarding the general approach for all Audi vehicles regarding brake vibrations.
This bulletin provides information when there is an ABS/ESC speed sensor implausible signal.
This bulletin provides information when there is corrosion on the friction survace of steel brake discs.
This bulletin serves as an assessment aid for shock absorber leaks.
This bulletin is an assessment aid for shock absorber leaks.
This bulletin provides information regarding the general approach to brakes rubbing.
This bulleitn provides information when there is an implausible signal in the ABS/ESC speed sensor.
Brake pulsation diagnostic guidelines
This bulletin provides information for when the ABS/ESC speed sensor has an implausible signal.
This bulletin provides information for when the brakes creak at an almost standstill.
This bulletin provides information on brake pulsation diagnostic guidelines.
This bulletin provides information on brake pulsation diagnostic guidelines.
This bulletin provides information on for when there is corrosion on the friction surface of a steel brake disc.
This bulletin provides information on brake noise analysis and handling.
This bulletin provides information for when one or more DC is stored in the ABS control unit related to the parking...
Read full bulletin
switch; DTC C100C07 and/or C100C29.
This bulletin provides information for when there are noises when braking, and the brake pad thickness is OK.
This bulletin provides instructions for brake noise analysis and handling.
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
This technical service bulletin provides troubleshooting for brake noise.
This technical service bulletin provides troubleshooting for brake noise.
This technical service bulletin provides troubleshooting for brake noise.
This informational bulletin contains knowledge on why oil may appear on one or several of the shock absorbers.
This informational bulletin provides diagnostic information for brake conditions.
This technical service bulletin provides troubleshooting for brake noise.
This informational contains an explanation for when the customer hears creaking noises when braking at almost standstill...
Read full bulletin
(crawling when pulling away or briefly before standstill).
This technical service bulletin provides troubleshooting for brake noise.
This informational bulletin provides diagnostic information for brake conditions.
This bulletin contains repair instructions for leaking shock absorbers.
This technical service bulletin provides troubleshooting for brake noise.
This technical service bulletin provides troubleshooting for brake noise.
Brake-related vibration and pulsation has several causes that depend on driving style and resulting brake disc ...
Read full bulletin
temperature, as well as environmental conditions. Both the intensity of the wear of the brake system and the type of wear depend on the operating conditions of the vehicle. The wear of the brake discs is determined by the frequency and intensity of the brake operations. Dirt build-up, exposure to sand, long standing times, and road salt or similar, can also promote wear as well as cause scoring marks on the brake discs. The driving style of the driver also influences the wear of the brake system. An overly-aggressive driving style, which results in frequent sharp braking, can lead to more wear (particularly of the brake pads). A gentle driving style can result in very light brake applications. If the brakes are always applied with little pressure, a rust film and other airborne particles may settle on the brake discs and pads. Firm brake operations can help clean off such build-up from the brakes.
This informational bulletin contains knowledge on why oil may appear on one or several of the shock absorbers.
This informational bulletin contains technical information for when there is condensation visible on the inside of the...
Read full bulletin
headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
Clunking or rattling noises are heard from rear suspension area when vehicle is driven over bumps.
Read full bulletin
These noises can be caused by an improperly seated rear bump stop (which occurs when the rear bump stop was not fully inserted into the rear shock absorber mounting during PDI).
Supersedes Technical Service Bulletin Group 46 number 14-86 dated July 14, 2014.
Read full bulletin
DO NOT use this TSB if there is another TSB for same concern applicable to the VIN. This TSB is only intended for diagnostic purposes and does not serve as a guideline for determining warrantable conditions. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. driving style, environmental conditions, and service history of the vehicle. Additionally, as brake pads and discs wear, their dampening ability is reduced. Disc thickness variation (DTV) is a common condition that contributes to brake pulsation. DTV occurs when the two braking surfaces of the brake disc are no longer parallel to each other. This condition cannot be accurately measured with normal workshop tools.
Supersedes Technical Service Bulletin Group 46 number 15-02 dated February 9, 2015.
Read full bulletin
The customer may report hearing brake noise from front or rear brakes. The customer may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking. DO NOT use this TSB if there is another brake noise TSB applicable to the VIN. For additional information, refer to the Audi Brake systems brochure. Brake noise can be attributed to many causes. Brake discs or brake pads are close to or below their wear limit. New brake pads and/or discs have not been properly imbedded after installation. Aftermarket pads or discs are installed. There is debris (such as small stones, grit, road salt, or sand) between brake disc and brake pad. Discs are covered with rust. Rust can form when the vehicle has not been driven for a long period of time. Discs are grooved. There is chemical contamination on the braking surface of the brake disc due to wheel or tire cleaner being sprayed directly onto the brake disc. There are ?pad marks? on the brake disc as a result of brake pad material transferring to the discs. Pad marks can occur when a vehicle has been parked for long periods of time in a wet or snowy environment.
Supersedes Technical Service Bulletin Group 40 number 14-41 dated July 2, 2014.
Read full bulletin
Oil appears on one or several shock absorbers. Oil may appear on a shock absorber As a result of a leak because the shock absorber is damaged. Oil may appear on a shock absorber As a result of residue from when the shock was filled during production, or as a result of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
Supersedes Technical Service Bulletin Group 46 number 14-94 dated August 11, 2014.
Read full bulletin
The brake pad wear indicator comes on, but brake pad thickness is above the wear limit.
Supersedes Technical Service Bulletin Group 94 number 12-92 dated October 24, 2012.
Read full bulletin
Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens.
The customer may report hearing brake noise from front or rear brakes.
Read full bulletin
The customer may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking. Brake noise can be attributed to many causes. Brake discs or brake pads are close to or below their wear limit. Aftermarket pads or discs have been installed. There is debris (such as small stones, grit, road salt, or sand) between brake disc and brake pad. Discs are covered with rust. Rust can form when the vehicle has not been driven for a long period of time.
Steering
38 bulletinsThis bulletin provides information about vibrations and rotational steering vibrations.
This bulletin provides informaiotn regarding squeaking noises when steering or maneuvering.
This bulletin provides information about vibrations and rotational steering vibrations.
This bulletin provides information about the steering wheel alignment.
This bulletin addresses complaints about the heated steering wheel, DTC B145504.
This bulletin provides information when there is a prompt to take over steering; hands off detection.
This bulletin provides information when there is a prompt to take over steering; hands off detection.
This bulletin provides information regarding steering wheel visual damage.
This bulletin provides information when there are vibrations and rotational steering wheel vibrations.
This bulletin provides information vibrations and rotational steering wheel vibrations.
This bulletin provides information vibrations and rotational steering wheel vibrations.
This bulletin provides information when there is visual damage on the steering wheel.
This bulletin provides information when there is noise while steering.
This bulletin provides information when there is noise while steering.
This bulletin provides information for when there is noise when steering.
This bulletin provides information if there is noise when steering the vehicle.
Steering wheel shimmy, vibration and/or oscillation
Steering wheel leather damage, all vehicles
Steering wheel shimmy, vibration, and/or oscillation
This bulletin provides information for when a steering wheel shimmy, vibration, and/or oscillation is reported.
This bulletin provides information for instances where the steering wheel leather is damaged.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This bulletin states that squeaking noises which may be more prevalent in wet weather during steering is normal and...
Read full bulletin
repair is not needed.
This bulletin provides instructions for when a vibration is felt in the floor, seat, footwell, pedals or steering wheel...
Read full bulletin
while driving at highway speeds from 55 - 80 mph.
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering...
Read full bulletin
wheel isn't heating evenly.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This information bulletin provides an explanation for squeaking noises heard when the steering wheel is turned or...
Read full bulletin
maneuvered.
This technical service bulletin informs the reader that damage to the appearance of the leather steering wheel caused by...
Read full bulletin
outside influence is not covered under warranty.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
Supersedes Technical Service Bulletin Group 44 number 14-50 dated May 14, 2014.
Read full bulletin
Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. Customer feels the vibration while driving at highway speeds from 55 ? 80 mph (88 ? 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. If an applicable Repair Authorization is not followed, the claim will not be paid.
Supersedes Technical Service Bulletin Group 48 number 13-54 dated September 13, 2013.
Read full bulletin
Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.
Supersedes Technical Service Bulletin Group 44 number 14-56 dated December 8, 2014.
Read full bulletin
Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. Customer feels the vibration while driving at highway speeds from 55 ? 80 mph (88 ? 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. If an applicable Repair Authorization is not followed, the claim will not be paid. Tires with higher mileage and/or wear should be inspected to determine the best correction for the issue (repair or replacement). Tire life and condition should be determined prior to starting any diagnosis or repair for a vibration.
ON AUDI VEHICLES WITH ELECTROMECHANICAL STEERING MANUFACTURED WITHIN A SPECIFIC PERIOD, IT IS POSSIBLE THAT THE SEAL ON...
Read full bulletin
THE POWER STEERING CONTROL UNIT WAS NOT MANUFACTURED CORRECTLY.
ON AUDI VEHICLES WITH ELECTROMECHANICAL STEERING MANUFACTURED WITHIN A SPECIFIC PERIOD, IT IS POSSIBLE THAT THE SEAL ON...
Read full bulletin
THE POWER STEERING CONTROL UNIT WAS NOT MANUFACTURED CORRECTLY.
Software & Calibration
38 bulletinsThis is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle...
Read full bulletin
programming function: A software fix is needed to correct the issue: The ODIS Audi Brand update 2.41.1 is setting a ODS5003E error code when you perform the 90TV SVM flash.
This bulletin provides information on how to set up and use the FMC for obtaining vehicle software updates (SD Creator...
Read full bulletin
decomissioned).
Removed expiration date, Updated part numbers in parts and claiming sections, General circular updates
Removed expiration date, Updated part numbers in parts and claiming sections, General circular updates
This bulletin provides information for when the lane change assist radars cannot be calibrated after replacement.
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
ElsaPro Software update and technical bulletins
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM)...
Read full bulletin
software update for any TSB or Update.
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM)...
Read full bulletin
software update for any TSB or Update.
This bulletin contains general instructions for software updates.
Dealer Communication - Vehicle Sales Reporting, Reinstatement, and Audit Policy Update - Effective September 30, 2021
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
This bulletin contains general software update instructions for vehicles with PR Code 7UH.
This informational bulletin instructs the dealer to advise the customer to update their iPhone to iOS 14 to address the...
Read full bulletin
MMI freezing during a phone call.
SERV_ACT - After-Run Coolant Pump - Updated claiming and work instructions: A single part number per criteria will now...
Read full bulletin
be used.
00 Software Version Management (SVM), operating instructions
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
This bulletin contains instructions for MIB2 Standard on how to update the MMI.
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
UPDATE ? Servicing Child Lock (NVLW)
UPDATE ? Servicing Child Lock (NVLW)
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
This technical service bulletin provides software update instructions to fix an issue that prevents Google Earth from...
Read full bulletin
loading.
This bulletin contains a software update to correct high ambient temperatures and a low throttle input.
This is a reference bulletin that contains software update information for the MID2 MMI system.
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
Supersedes Technical Service Bulletin Group 00 number 12-32 dated February 7, 2012.
Read full bulletin
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
BULLETIN REVISED TO UPDATE INFORMATION ON SAGA SHEET.
BULLETIN REVISED TO UPDATE INFORMATION ON SAGA SHEET.
THIS TECHNICAL SERVICE BULLETIN PROVIDES A SOFTWARE CODE FOR CORRECTING AN ISSUE THAT CAUSES DTC P046100.
THIS TECHNICAL SERVICE BULLETIN PROVIDES A SOFTWARE CODE FOR CORRECTING AN ISSUE THAT CAUSES DTC P046100.
THIS TECHNICAL SERVICE BULLETIN PROVIDES A SOFTWARE CODE FOR CORRECTING AN ISSUE THAT CAUSES DTC P046100.
Body & Paint
36 bulletinsThis TSB describes a corrosion issue due to outside influence and the prohibition of warranty in these cases.
This bulletin provides service information regarding exterior glass cleaning.
This bulletin provides information when there is a paint issue on alloy wheels.
This bulletin provides information when there is a film/visible rings on the clear glass cover of the headlight when the...
Read full bulletin
dipped beam is switched on.
This bulletin provides information when tehre is a paint issue on alloy wheels.
This bulletin provides guidance for exterior glass cleaning.
This bulletin provides information when there is corrosion on the tailpipes.
This TSB provides information when the exterior rubber trim is spotted.
This bulletin provides information regarding cleaning exterior glass.
This bulletin provides informationw hen there are car was brush bristles trapped in the seam between the headlight and...
Read full bulletin
fender.
This bulletin provides information when the frameless window auto-drop function is inoperative in freezing weather.
This bulletin provides information on how to set up and use the SD Creator for obtaining vehicle software updates via...
Read full bulletin
the Mirror Server.
This bulletin provides information for when the frameless window auto-drop function is inoperative during freezing...
Read full bulletin
weather.
This bulletin provides information for when exterior glass cleaning is needed.
This bulletin provides information for when car wash bristles become stuck in the body gap between the headlight and...
Read full bulletin
fender.
This bulletin describes the process to clean sticker residue from the windshield.
This bulletin provides instructions for when the exterior trim has spots.
This bulletin provides instructions for when faint images appear on the windshield from the production sticker, or an...
Read full bulletin
image of the suction cups used to install the windshield in production.
Sunglass holder will not close
This bulletin provides instructions on how to properly clean exterior glass.
This bulletin provides directions on how to deice a frozen door on vehicles with frameless windows.
This bulletin provides instructions on how to clean exterior glass.
This bulletin contains instructions for front and/or rear doors cannot be opened or closed in freezing weather.
This bulletin provides instructions on how to clean exterior glass.
This informational bulletin contains instructions for minimizing the risk of an unintentional opening of the trunk lid...
Read full bulletin
with the remote.
This informational bulletin contains instructions for minimizing the risk of an unintentional opening of the trunk lid...
Read full bulletin
with the remote.
Supersedes Technical Service Bulletin Group 57 number 12-62 dated January 9, 2012.
Read full bulletin
The trunk cannot be unlocked with the button on the remote, with the button in the driver?s door panel, or with the handle on the lid of the trunk. Vehicles have a ?VALET? button in the glove box that activates the valet parking feature, which prevents unauthorized access to the trunk. When the valet parking feature is activated, the trunk can only be opened mechanically with the key.
This technical service bulletin provides instructions for installing a cord to prevent water leaks at the front corner...
Read full bulletin
of the convertible top.
Windshield is streaked, has a snakeskin appearance, or its surface feels rough.
Read full bulletin
Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
This document contains information on Cabriolet-specific issues.
Read full bulletin
These issues include the rear lid does not open, an overview of switch positions, the influence of the convertible roof compartment lid position, and environmental data for controlling the convertible roof.
Supersedes Technical Service Bulletin Group 74 number 14-19 dated May 9, 2014.
Read full bulletin
The panel on the back of the front seat is warped or dented. The headrest on the rear seatback may also be damaged. The damaged is caused when the headrest of the rear seat backrest comes in contact with the back of the front seat. This occurs when the rear seat is folded down with the headrests installed, and the front seat is moved back far enough to make contact with the rear seat headrest.
This technical service bulletin provides repair instructions for paint flaking off the radiator grille or front license...
Read full bulletin
plate holder.
THIS TECHNICAL SERVICE BULLETIN PROVIDES INSTRUCTIONS FOR INSTALLING A CORD TO PREVENT WATER LEAKS AT THE FRONT CORNER...
Read full bulletin
OF THE CONVERTIBLE TOP.
THIS TECHNICAL SERVICE BULLETIN PROVIDES INSTRUCTIONS FOR INSTALLING A CORD TO PREVENT WATER LEAKS AT THE FRONT CORNER...
Read full bulletin
OF THE CONVERTIBLE TOP.
THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO RECEIVE DIAGNOSIS OR AUTHORIZATION FROM THE TECHNICAL ASSISTANCE...
Read full bulletin
CENTER BEFORE REPAIRING AN ISSUE WITH THE SIDE MIRROR TURN SIGNAL.
THIS TECHNICAL SERVICE BULLETIN PROVIDES INSTRUCTIONS FOR INSTALLING A CORD TO PREVENT WATER LEAKS AT THE FRONT CORNER...
Read full bulletin
OF THE CONVERTIBLE TOP.
Pre-Delivery & Maintenance
34 bulletinsThis bulletin provides service infrmation for workshop mode with Audi connect vehicles.
This service information TSB describes a cosmetic issue after using a car wash.
Vehicle Concerns Before Recall Repair Available
This bulletin provides information on how to document optical defects in order to submit to Warranty.
Product quality is Announcing a new innovation in technical service bulletins: portable, easy to access videos
This bulletin contains instructions for when the zirconium inserts found to be not firmly attached during service work.
SAFETY RECALLS, COMPLIANCE RECALLS and STOP SALES
This technical service bulletin provides troubleshooting information for the vehicle locking system.
This informational bulletin outlines proper warranty procedure for optical defects.
This technical service bulletin provides troubleshooting information for the vehicle locking system.
This informational contains instruction on how to document optical concerns for warranty claims.
This informational bulletin outlines proper warranty procedure for optical defects.
Recall Reminder Part Labels
This bulletin contains instructions for vehicle inspection, protection removal, and detailing.
This technical service bulletin provides troubleshooting information for the vehicle locking system.
This technical service bulletin provides troubleshooting tips for various issues with the MMI3G+ functionality.
This bulletin contains instructions for vehicle inspection, protection removal, and detailing.
Major Maintenance Section: REMOVED: "Rollover protection: Check function with soft top down (Audi A5 Cabriolet and S5...
Read full bulletin
Cabriolet only)" (Already listed under Time-Sensitive Maintenance Items)
This document contains the pre-delivery inspection technician reference document.
Read full bulletin
The Pre-Delivery Inspection Technician Reference Document is designed to be a resource used in hand with the Pre-Delivery Inspection Checklist (PDI). The PDI Checklist has been simplified to make the process more efficient, and in doing so, this document has been created to be used as a reference for checklist items that may have additional information. On the PDI Checklist, you find that certain items have been notated with an asterisk symbol (*), this lets you know that additional information can be found in this Technician Reference Document.
This technical service bulletin provides troubleshooting tips for various issues with the MMI3G+ functionality.
This document contains the pre-delivery inspection technician reference document.
Read full bulletin
The Pre-Delivery Inspection Technician Reference Document is designed to be a resource used in hand with the Pre-Delivery Inspection Checklist (PDI). The PDI Checklist has been simplified to make the process more efficient, and in doing so, this document has been created to be used as a reference for checklist items that may have additional information. On the PDI Checklist, you find that certain items have been notated with an asterisk symbol (*), this lets you know that additional information can be found in this Technician Reference Document. This document is in Spanish.
Supersedes Technical Service Bulletin Group 00 number 11-19 dated April 8, 2011.
Read full bulletin
This TSB contains information on technician preparation when calling the Audi Technical Assistance Center
Supersedes Technical Service Bulletin Group 51 number 15-09 dated October 2, 2015.
Read full bulletin
Instructions for vehicle inspection, protection removal, and detailing.
Supersedes Technical Service Bulletin Group 51 number 13-07 dated September 30, 2013.
Read full bulletin
Instructions for vehicle inspection, protection removal, and detailing.
Supersedes Technical Service Bulletin Group 00 number 10-05 dated June 14, 2010.
Read full bulletin
VIN plate and/or B-Pillar Safety Certification label requires replacement.
Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014.
Read full bulletin
Technician preparation when calling the Audi Technical Assistance Center (TAC).
Supersedes Technical Service Bulletin Group 66 number 13-30 dated June 4, 2013.
Read full bulletin
Customer may report that the license plate attachment screws do not install properly. License plate mounting bracket threaded inserts stripped.
THIS TECHNICAL SERVICE BULLETIN PROVIDES TROUBLESHOOTING TIPS FOR VARIOUS ISSUES WITH THE MMI3G+ FUNCTIONALITY.
THIS TECHNICAL SERVICE BULLETIN PROVIDES TROUBLESHOOTING TIPS FOR VARIOUS ISSUES WITH THE MMI3G+ FUNCTIONALITY.
THIS TECHNICAL SERVICE BULLETIN PROVIDES TROUBLESHOOTING TIPS FOR VARIOUS ISSUES WITH THE MMI3G+ FUNCTIONALITY.
THIS TECHNICAL SERVICE BULLETIN PROVIDES TROUBLESHOOTING INFORMATION FOR THE VEHICLE LOCKING SYSTEM.
THIS TECHNICAL SERVICE BULLETIN PROVIDES TROUBLESHOOTING TIPS FOR VARIOUS ISSUES WITH THE MMI3G+ FUNCTIONALITY.
THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO REPLACE THE AUXILIARY COOLANT PUMP IF CERTAIN DTCS ARE STORED.
THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO REPLACE THE AUXILIARY COOLANT PUMP IF CERTAIN DTCS ARE STORED.
Tires & Wheels
30 bulletinsThis TSB provides information regarding rotational and other steerihng wheel vibrations.
This bulletin provides information when noises from wheel input shaft/drive shaft are reported.
This bulletin provides information regarding wheel alignment.
This bulletin provides service information pertaining to noises from wheel input shaft/drive shaft.
Tightening wheel bolts
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This informational bulletin explains how the temporary/collapsible spare wheel inflates.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
Read full bulletin
2015-2020 A3 Cabriolet, 2016-2018 A3 Sportback, 2008-2009 S4 Cabriolet, 2008 and 2010 RS4 Cabriolet, 2018-2020 A5 Sportback, 2010-2012 and 2018-2020 RS5 Cabriolet, 2018-2020 S5 Sportback, 2008 A7, 2008-2011 S7
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
Revision to Tires-rotate: 5K only; added "(except R8)"
This bulletin contains repair instructions for when the all wheel drive coupling is stuck on or doesn't engage without...
Read full bulletin
DTCs stored.
This bulletin contains repair instructions for when the all wheel drive coupling is stuck on or doesn't engage without...
Read full bulletin
DTCs stored.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
Supersedes Technical Service Bulletin Group 44 number 13-46 dated December 9, 2013.
Read full bulletin
Wheel bolt requires torque adjustment.
This document contains the Audi tire chain information by vehicle.
This document contains the Audi normal load condition tire pressure table.
This document contains the tire pressure table for Audi vehicles.
Read full bulletin
This document is in Spanish.
This document contains Audi tire chain information by vehicle.
Read full bulletin
Snow chains must not be used on the compact spare wheel. Provided the subject tires can accommodate snow chains, such chains can be used only on the front wheels if the vehicle is equipped with front wheel drive. Provided the subject tires can accommodate snow chains, such chains can be used on the front and rear wheels if the vehicle is equipped with Quattro. Ultra-high performance tires are not suited for use on ice or snow. Part numbers are for reference only.
This document contains the normal load condition tire pressure table.
Read full bulletin
This document is in Spanish.
This document contains the normal load condition tire pressure table.
This document contains the Audi normal load condition tire pressure table.
This document contains the Audi normal load condition tire pressure table.
Read full bulletin
This document is in Spanish.
3.0T R18 235/55 R19 104H Winter Wheel and Tire pkg changed to R19 235/55 R19 104H Winter Wheel and Tire pkg
This document contains the tire pressure table for MY 2017 Audi vehicles under normal load conditions.
Read full bulletin
This document is in Spanish.
This document contains the tire pressure table for MY 2017 Audi vehicles under normal load conditions.
Lighting
30 bulletinsThis TSB provides informatin when the cigarette lighter element does not eject, or the cigarette lighter is inoperable.
This bulletin provides information when the exterior lights have moisture accumulation.
This bulletin provides informationw hen there are optical concerns with the tail lights.
This bulletin provides informationw hen there are optical concerns with the tail lights.
This bulletin provides information when the exterior lights have moisture accumulation.
This bulletin provides information on visual concerns with the headlight lens.
This bulletin provides information pertaining to when there are foreign objects inside of a headlight or taillight.
This bulletin provides detailed information on the proper documentation of optical concerns for headlights and...
Read full bulletin
taillights.
This bulletin provides details on how to properly document optical concerns in headlights and taillights for warranty...
Read full bulletin
submissions.
This bulletin provides information for when there is moisture accumulation in the exterior lights.
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
This informational bulletin contains information on the different shading of LED headlights.
This bulletin contains instructions for addressing condensation in the headlights.
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
Exterior lights, moisture accumulation 2013-2021 A3 Cabriolet, 2016-2018 Sportback, 2004-2005 A4 Cabriolet, 2004-2008...
Read full bulletin
S4 Cabriolet, 2008 RS4 Cabriolet, 2010-2021 A4 allroad, 2018-2021 A5 Sportback, 2010-2012, 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2004-2006 A7, 2004-2011 S7, 2021 RS6 Avant, 2004-2006 S8
This informational bulletin contains instructions for when car wash bristles are stuck in the headlights.
Read full bulletin
2015-2021 A3 Cabriolet, 2015-2018 A3 e-tron, 2011-2021 A4 allroad, 2018-2021 A5 Sportback, 2011-2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 RS6 Avant
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
Read full bulletin
2015-2021 A3 Cabriolet, 2016-2018 A3 Sportback, 2018-2021 A5 Sportback, 2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 RS 6 Avant
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
This communication provides instructions for claiming "delight elements " for repairs related to recalls 80C5 and 80C6.
Supersedes Technical Service Bulletin Group 61 number 13-21 dated September 3, 2013.
Read full bulletin
Convertible top exterior cloth appears soiled. The convertible top is made of durable fabric that has been treated at the factory with a compound that helps repel dirt and water. With proper care, the cloth will retain its function and proper appearance for a long time. It is normal, however, for the fabric to slightly change color as it ages. This is particularly true of lighter-color tops. The cloth tension changes when the top is opened, which can cause kinks. When the top is closed, the kinks improve after a short time. However, these material-related kinks can never be completely avoided. In addition, dirt and dust can deposit in the kinks. If these dirt and dust deposits are not properly removed in a car wash, they can contribute to poor appearance.
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
This bulletin details instructions on handling when the oil minimum message appears but the oil level is above minimum...
Read full bulletin
but not overfilled.
The message ?Talk button for speech dialog system not used? appears in the DIS for A3 cabriolet vehicles.
Read full bulletin
The message ?Not available? appears in the DIS for A5 cabriolet vehicles. By design, the voice recognition (VR) system (also known as the speech dialog system (SDS)) is not enabled by the factory for A3 cabriolet and A5 cabriolet vehicles due to potential performance issues.
Supersedes Technical Service Bulletin Group 66 number 15-46 dated February 19, 2015.
Read full bulletin
Customer may report that the license plate attachment screws do not install properly. The license plate brackets are designed to be used with the appropriate-length screw installed by hand with a screwdriver. Damaged warranty parts have been returned to Audi of America with evidence of excessive torque used when installing the screw and/or excessive screw length.
Supersedes Technical Service Bulletin Group 94 number 13-12 dated March 29, 2013.
Read full bulletin
The headlight switch knob was designed with a normal position and a pushed-in position. This feature was designed to avoid injuries during a collision.
Tire vibration (with originally-installed 245/40 R18 93H Pirelli P6 Four Seasons tires) - Repair Authorization.
Read full bulletin
Customer may report feeling a vibration while driving at highway speeds. This Repair Authorization bulletin only applies to vehicles within the Adjustment coverage period (up to 12/12), has originally-installed 245/40 R18 93H Pirelli P6 Four Seasons tires, tires that have an "AO" marking, and has the PR code HM3. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts.
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
THE BULLETIN STATES A NORMAL FUNCTION OF THE HEADLIGHT SWITCH AND HOW TO FIX BUT NOT REPLACE.
Read full bulletin
DEALER IS TO ADVISE CUSTOMER ON WHY THE HEADLIGHT SWITCH PRESSES IN.
THIS BULLETIN DETAILS INSTRUCTIONS ON HANDLING WHEN THE OIL MINIMUM MESSAGE APPEARS BUT THE OIL LEVEL IS ABOVE MINIMUM...
Read full bulletin
BUT NOT OVERFILLED.
Fuel System
27 bulletinsThis bulletin provides information when there is corrosion on the exhaust tail pipes.
This bulletin provides information when there are functional restrictions or driving behavior due to diesel detected in...
Read full bulletin
petrol.
This bulletin provides service information ror when the fuel tank cannot be fully filled.
This bulletin provides information when there are functional restrictions or driving behavior due to diesel detected in...
Read full bulletin
petrol.
This bulletin provides service information ror when the fuel tank cannot be fully filled.
Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the...
Read full bulletin
State of Minnesota.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis.
Read full bulletin
Media files can now be viewed on any smartphone or tablet.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis.
Read full bulletin
Media files can now be viewed on any smartphone or tablet.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis.
Read full bulletin
Media files can now be viewed on any smartphone or tablet.
The informational bulletin explains why during COVID-19 there is winter-blend fuel during a warmer season and causing...
Read full bulletin
some issues.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
This bulletin instructs the reader to diagnose issues with fuel pressure and to replace the fuel delivery unit with the...
Read full bulletin
new kit if the correct DTC and symptom code combination is present.
This bulletin instructs the reader to diagnose issues with fuel pressure and to replace the fuel delivery unit with the...
Read full bulletin
new kit if the correct DTC and symptom code combination is present.
This bulletin instructs the reader to diagnose issues with fuel pressure and to replace the fuel delivery unit with the...
Read full bulletin
new kit if the correct DTC and symptom code combination is present.
This bulletin instructs the reader to diagnose issues with fuel pressure and to replace the fuel delivery unit with the...
Read full bulletin
new kit if the correct DTC and symptom code combination is present.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis.
Read full bulletin
Media files can now be viewed on any smartphone or tablet. Audi of America has started to host its TSB videos outside of ElsaPro. Doing so provides higher-quality videos, more reliable access to the videos, and the ability to view the videos on different devices.
Supersedes Technical Service Bulletin Group 91 number 13-85 dated May 29, 2013.
Read full bulletin
The iPod or the USB memory stick is not recognized or the iPod is not charged when either unit is connected to the Audi music interface (AMI). MMI3G or a Symphony/Concert CAN radio system with separate AMI control unit in the glove box or armrest. MMI3G+ with integrated AMI in the MMI main unit.
Supersedes Technical Service Bulletin Group 20 number 13-29 dated November 15, 2013.
Read full bulletin
The fuel tank has been removed from the vehicle and must be neutralized before shipment or disposal. When the fuel tank in a vehicle is replaced, the original tank must be properly flushed to neutralize the remaining gasoline or diesel fuel.
THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO DIAGNOSE ISSUES WITH FUEL PRESSURE AND TO REPLACE THE FUEL...
Read full bulletin
DELIVERY UNIT IF DEVIATIONS ARE FOUND.
THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO DIAGNOSE ISSUES WITH FUEL PRESSURE AND TO REPLACE THE FUEL...
Read full bulletin
DELIVERY UNIT IF DEVIATIONS ARE FOUND.
THIS TECHNICAL SERVICE BULLETIN IS REPAIR AUTHORIZATION FOR ISSUES WITH FUELING THE VEHICLE.
THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO DIAGNOSE ISSUES WITH FUEL PRESSURE AND TO REPLACE THE FUEL...
Read full bulletin
DELIVERY UNIT IF DEVIATIONS ARE FOUND.
THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO DIAGNOSE ISSUES WITH FUEL PRESSURE AND TO REPLACE THE FUEL...
Read full bulletin
DELIVERY UNIT IF DEVIATIONS ARE FOUND.
THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO DIAGNOSE ISSUES WITH FUEL PRESSURE AND TO REPLACE THE FUEL...
Read full bulletin
DELIVERY UNIT IF DEVIATIONS ARE FOUND
THIS TECHNICAL SERVICE BULLETIN IS REPAIR AUTHORIZATION FOR ISSUES WITH FUELING THE VEHICLE.
HVAC & Climate
21 bulletinsThis bulletin provides information on the GFF test plan required for AC compressor replacements regardless of the...
Read full bulletin
concern.
This bujlletin provides information regarding the GFF test plan required for A/C compressor replacements regardless of...
Read full bulletin
the concern.
This bulletin provides information regarding the GFF test plan required for A/C compressr replaements regardless of the...
Read full bulletin
concern.
This bulletin provides information when a GFF test plan required for A/C compressor replacements regardless of concern.
This bulletin provides information pertaining to the GFF test plan required for A/C compressore replacements, regardless...
Read full bulletin
of the concern.
This bulletin provides informatin for the GFF test plan that is requied for AC compressor replacements.
This bulletin provides information when the defrost function deactivates after 5-10 seconds and/or MMI settings are...
Read full bulletin
lost.
This bulletin provides information on the GFF test plan required when replacing the A/C compressor.
This bulletin provides instructions for when the customer advises that there is insufficient or uneven cabin heating...
Read full bulletin
from the HVAC system.
This informational bulletin details on how to get a GFF test plan for A/C compressor replacements.
This informational bulletin details on how to get a GFF test plan for A/C compressor replacements.
This bulletin contains repair instructions for when there is radio static when the rear heater is active.
This bulletin contains instructions for addressing an insufficient or uneven heating performance from the HVAC system.
This bulletin applies to any repair that requires replacement of the air conditioning compressor and details how to run...
Read full bulletin
a ODIS GFF test plan.
Customer may report poor performance of A/C system or that the A/C system is inoperative.
Read full bulletin
Any replacement of A/C compressors must include an ODIS GFF test plan confirming a malfunction of the A/C system with documentation of the recovered refrigerant volume.
Supersedes Technical Service Bulletin Group 87 number 13-46 dated October 21, 2013.
Read full bulletin
The A/C Compressor has been diagnosed as faulty and will be replaced under warranty. When performing replacement of an A/C Compressor under warranty, the amount of refrigerant and oil recovered must be documented.
Supersedes Technical Service Bulletin Group 87 number 15-67 dated August 19, 2015.
Read full bulletin
This bulletin applies to any repair that requires replacement of the air conditioning compressor. Any replacement of A/C compressors?regardless of the reason for failure?must include an ODIS GFF cooling performance test plan of the A/C system with documentation of the recovered refrigerant volume. This GFF test plan requirement is mandatory without exception.
Supersedes Technical Service Bulletin Group 87 number 15-63 dated May 18, 2015.
Read full bulletin
There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor.
ON AUDI VEHICLES WITH AUXILIARY AIR HEATER (PTC ELEMENT) MANUFACTURED WITHIN A SPECIFIC PERIOD, THE HEATING PERFORMANCE...
Read full bulletin
MAY DECREASE OVER TIME.
ON AUDI VEHICLES WITH AUXILIARY AIR HEATER (PTC ELEMENT) MANUFACTURED WITHIN A SPECIFIC PERIOD, THE HEATING PERFORMANCE...
Read full bulletin
MAY DECREASE OVER TIME.
ON AUDI VEHICLES WITH AUXILIARY AIR HEATER (PTC ELEMENT) MANUFACTURED WITHIN A SPECIFIC PERIOD, THE HEATING PERFORMANCE...
Read full bulletin
MAY DECREASE OVER TIME.
Suspension
20 bulletinsThis bulletin provides information on locating noises coming from the suspension.
This TSB provides informaiton about locating noises coming from suspension.
Rattle noise from rear suspension
Rattle noise from rear suspension
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
This bulletin describes the proper procedure to address a clicking or clacking noise from the wheel bearing
This bulletin describes the proper procedure to address a clicking or clacking noise from the wheel bearing
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the...
Read full bulletin
vehicle is driven over bumps.
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the...
Read full bulletin
vehicle is driven over bumps.
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the...
Read full bulletin
vehicle is driven over bumps.
This bulletin contains instructions for determining if bushings need to be replaced.
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the...
Read full bulletin
vehicle is driven over bumps.
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
This bulletin contains information on how to fix a clunking or rattling noise heard from the rear suspension when the...
Read full bulletin
vehicle id driven over bumps.
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
THIS TECHNICAL SERVICE BULLETIN PROVIDES INSTRUCTIONS FOR CORRECTING A CLICKING SOUND FROM THE WHEEL BEARING(S).
Air Bags & Safety
9 bulletinsThis Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the...
Read full bulletin
airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent warning regarding counterfeit...
Read full bulletin
replacement airbag inflators that are being installed in used vehicles.
This Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the...
Read full bulletin
airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.
This bulletin contains instructions for when the airbag warning is illuminated and DTC B13BCF2 is stored.
This bulletin advises on identifying when a foreign object has obstructed normal operation of the seat belt.
This bulletin contains instructions for when the airbag warning is illuminated and DTC B13BCF2 is stored.
This bulletin contains instructions for additional reporting requirements for safety related inquiries...
Read full bulletin
(airbag/seatbelts, accidents, fire and overheat damage).
This bulletin contains instructions for when the airbag warning is illuminated and DTC B13BCF2 is stored.
Read full bulletin
2015-2020 A3 Cabriolet, 2016-2018 A3 Sportback, 2018-2020 A5 Sportback, 2018-2020 RS5 Cabriolet, 2018-2020 S5 Sportback
This bulletin contains instructions for additional reporting requirements for safety related inquiries...
Read full bulletin
(airbag/seatbelts, accidents, fire and overheat damage.
Transmission
7 bulletinsThis bulletin provides information about replacing the clutch end cover.
This bulletin provides information about replacing the clutch end cover.
This bulletin contains instructions for addressing a leak from the transmission oil pan gasket or transfer case.
ADDITIONAL MAINTENANCE ITEMS: Perform first at 35,000 miles and thereafter every 40,000 miles.
Read full bulletin
DSG/S tronic - Change ATF oil and replace transmission filter element for clutch hydraulics (A3, S3, TT, TTS, S5, S5 Cabriolet, RS 5, S6, and S7 only) Added: Footnote 3: "For the 8K2 Audi S4 use the MY 2015 maintenance card. This is a push behind vehicle based on the PR code"
This technical service bulletin provides guidelines for diagnosing the clutch plate.
At low throttle input, transmission upshifts are delayed until high RPM.
Read full bulletin
At low throttle input, transmission does not upshift until 3,500 ? 4,000 RPM. Conditions occur in high ambient temperatures(above 110F).
THIS BULLETIN PROVIDE INSTRUCTIONS FOR WHEN THERE ARE HARSH GEAR SHIFTS BUT THERE IS NO FAULTS STORED AND YOU CAN...
Read full bulletin
DUPLICATE THE CONCERN.
Hybrid & EV
2 bulletinsThis document provides clarity on the MY24 Audi Q5 Hybrid fault code with technical service bulletin release on Monday,...
Read full bulletin
June 24.
This document provides clarity on the MY24 Audi Q5 Hybrid fault code with technical service bulletin release on Monday,...
Read full bulletin
June 24.