2014 Audi A4 TSBs
558 Technical Service Bulletins across 17 categories
Categories
Other
166 bulletinsThis bulletin states that technicians are required to report to the manufacturer when a vehicle has flooded, and specify...
Read full bulletin
the height to which the vehicle has been flooded.
This bulletin provides information for reporting safety related information to the manufacturer.
This bulletin provides information when the license plate mounting bracket threded inserts are stripped.
This bulletin provides information when the horn sound quality is poor.
This bulletin provides a statement regarding the bottleneck of supply for VW approved oil types VW 504.00 and VW 507.00.
This special notice is to inform dealers to return the parts listed if it meets the criteria provided.
This bulletin provides information when there are noises from the area around the instrument cluster.
This bulletin provides informationwhen noises/vibration are detected from front of vehicle in dynamic mode.
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
This bulletin provides diagnostic information for the vehicle locking system.
This Reporting obligation requests that technicians contact the Technical Assistance Center (TAC) when the diagnostic...
Read full bulletin
tester refers to this reportin gobligation or to TPI 2033392.
This bulletin provides informaiotn about various infortainment system complaints.
This bulletin provides information when the parking assistance gives false warnings.
This bulletin provides information when the parking assistance gives false warnings.
This TSB provides information when there are noises from the area around the instrument cluster.
This bulletin provides information on VIN Plates, Safety Certification labels, and the ordering procedures.
This bulletin provides information regarding contact checks for event memories, intermittent.
This bulletin provides informaiotn when there are noises from the headliner.
This bulletin provides information when the anti-theft alarm activates for no reason, or does not activate.
This bulletin provides information on VIN Plates, Safety Certification labels, and the ordering procedures.
This bulletin provides informaiton when the license plate mouting bracket threaded inserts are stripped.
This bulletin provides information for when there is a fluid sample request from Product Support.
This bulletin provides information when the horn sound quality is poor.
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
This bulletin provides information when the anti-theft alarm activates for no reason, or when the anti-theft alarm does...
Read full bulletin
not activate.
This TSB is a label placement guide as required by CARB for remanufactured parts.
This TSB provides damage assessment guidelines for textile seat covers.
This TSB is a label placement guide as required by CARB for remanufactured parts.
This bulletin provides information about leather care and seat repair.
This bulletin provides informationw hen there are optical defects, scratches, and/or chrome peeling.
This bulletin provides information in circumstances where there are noises/vibration from front of vehicle in dynamic...
Read full bulletin
mode.
This bulletin provides information when the anti-theft alarm activates for no reason, or when the anti-theft alarm does...
Read full bulletin
not activate.
This TSB Provides information when parking assistance provides false warnings.
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
This bulletin provides diagnostic information regarding the locking system.
This bulletin provides information when there are noises and/or vibration in tight turns in vehicles with quattro drive.
This bulletin provides guidance in order to provid informaiton regarding preparatoin when calling the Audi Technical...
Read full bulletin
Assistnce Center (TAC).
This bulletin offers information about the basic information needed for technical requests for gaerbox complaints.
This bulletin offers information about the basic information needed for technical requests for gaerbox complaints.
This bulletin provides information when there are noises/vibration from the front of the vehicle while in dynamic mode.
This bulletin provides Audi technicians with information to prepare for contact to the Technical Assistance Center...
Read full bulletin
(TAC).
This bulletin provides information for when there is a fluid sample request from Product Support.
This bulletin provides information on the ordering procedures for VIN Plates, and Safety Certification labels.
This bulletin provides information for when there is a fluid sample request from Product Support.
This bulletin provides information on the ordering procedures for VIN Plates, and Safety Certification labels.
This bulletin provides general information regarding outside air temperature readings.
This bulletin provides information when there is noise from around the instrument cluster.
This bulletin provides information when the remote control key is inoperative.
This bulletin provides information for when DTC P0A7D00 is stored.
Repair Authorization
Repair Authorization.
Repair Authorization
Elsa newsletter
Elsa newsletter
Vehicle condition report
Vehicle detail report
Technician report
Audi delivery guidelines
Audi delivery guidelines
Audi delivery guidelines
SERV_ACT - After-Run Coolant Pump - Closure Notice
Google Maps Street View (NVLW))
This bulletin provides information when the parking assistance provides false warnings.
This bulletin provides general information about the outside air temperature reading.
This bulletin provides information for when the license plate mounting bracket threaded inserts are stripped.
This bulletin provides information on the VAS 611 015 PICO-NVH tool for professional noise analysis.
This bulletin provides damage assessment guidelines for textile seat covers.
This bulletin provides instructions regarding unauthorized chip tuning (TD1).
This bulletin provides information for when unauthorized/unjustified DTC memory entries are captured in ODIS test Plans...
Read full bulletin
(Ghost faults).
Audi On Track ? IQS Newsletter
Elsaweb Newsletter
This bulletin provides information on the additional reporting requirements for safety related inquiries.
Audi Oil Capacity Chart
Tabla de presin de los neumticos de condicin de carga normal para Audi modelo 2014
Quick Reference Specification Book
Informe del tcnico de Audi
Informe del tcnico de Audi
Informe del tcnico de Audi
Lineamientos de entrega de Audi
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
Audi Elsa Newsletter
This bulletin provides information on workshop mode with Audi connect vehicles.
This bulletin provides information on professional noise analysis with the VAS 611 015 PICO NVH Tool.
VW Elsa Newsletter
This bulletin provides information for when the washer solvent level warning is on.
This bulletin provides information for when there is noise from the area around the instrument cluster.
This bulletin provides information for when an unpleasant odor is coming from the heating and ventilation system.
This bulletin provides information for when an unpleasant odor is coming from the heating and ventilation system.
This bulletin provides information regarding the Audi advanced key.
This bulletin provides instructions for when the washer level warning is on but the reservoir is full.
This bulletin provides instructions for ordering replacement Safety Certification labels or VIN plates.
This bulletin provides information for when the customer advises that there is cracking, grinding, rattling, humming,...
Read full bulletin
whining, or similar interference.
This information bulletin contains a background on the outside air temperature reading.
This bulletin provides instructions for when the anti-theft alarm has gone off for no reason, or did not go off at all.
Read full bulletin
No DTCs are stored.
This bulletin provides instructions for when the washer solvent level warning is on in the DIS but the washer solvent...
Read full bulletin
level is correct.
Wastegate linkage dissconnected
97 no start
Squealing, howling, or whistling noise from under vehicle when cold
False warning by lane change assistant (Audi Side Assist)
97 No start (DTC P068A00)
97 No Styart (DTC P068A00)
97 No start (DTC P068A00)
System Leak Detected.
The NVLD pressure switch may erroneously detect a very small leak.
The NVLD pressure switch may erroneously detect a very small leak.
The NVLD pressure switch may erroneously detect a very small leak.
This special notice is to inform dealers to return the parts listed if it meets the criteria provided.
This informational bulletin contains instructions on how to download and use the Audi Frequency App.
This special notice is to inform dealers to return the parts listed if it meets the criteria provided.
The fault occurs with ATF temperature below 60 C.
Read full bulletin
Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
This bulletin contains information on noises from the instrument cluster installation area.
This bulletin contains instructions for properly cleaning and removing a musty odor from the heating and ventilation...
Read full bulletin
system.
This is an informational bulletin containing information about the outside temperature reading.
Dealer Communication: Vehicle Sales Reporting, Reinstatement, and Audit Policy
This informational bulletin contains instructions on how to download and use the Audi Frequency App.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This bulletin contains instructions for identifying and mixing factory fill coolants.
This bulletin contains instructions for identifying and mixing factory fill coolants.
Quick reference specification book.
Elso pro reminder.
ODIS Quick Reference Guide was sent to all dealer technicians (non-corporate
Several weeks ago, the ODIS Quick Reference Guide was sent to all dealer technicians (non-corporate
74 Front center armrest is stuck, does not slide, or is inoperative.
This informational bulletin gives instructions for identifying chip tuning.
This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant...
Read full bulletin
expansion tank cap.
This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.
This information bulletin states to remove the car wash bristle and advise the customer to go somewhere else to prevent...
Read full bulletin
it from occurring again.
This special notice is to inform dealers to return the parts listed if it meets the criteria provided.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This bulletin contains instructions for determining unexpected Audi presense interventions.
This bulletin contains instructions for properly cleaning and removing a musty odor in the vehicle.
This bulletin contains information on noises from the instrument cluster installation area.
This information bulletin contains a background on the outside air temperature reading.
This bulletin contains a cleaning procedure from leftover residue from suction cups or labels.
This bulletin contains instructions for determining if a repair is needed when coolant touches a poly V-belt and/or a...
Read full bulletin
toothed belt.
This informational bulletin contains instructions on how to download and use the Audi Frequency App.
This informational bulletin covers the condition of when license plate mounting bracket threaded inserts are stripped.
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't...
Read full bulletin
exist or it is inoperative/constant warning.
This bulletin contains instructions for addressing discoloration due to moisture on a new vehicle.
This special notice is to inform dealers to return the part numbers listed (State of California only).
Added new graphic to reflect where to find MY 21 information
This information bulletin contains a background on the outside air temperature reading.
This bulletin contains instructions for identifying and mixing factory fill coolants.
This bulletin contains instructions for correcting the phonebook.
This informational bulletin contains instructions on how to use the QR code in a TSB.
This bulletin contains instructions for properly cleaning and removing a musty odor in the vehicle.
This special notice is to inform dealers to return the parts listed if it meets the criteria provided.
This bulletin contains information on noises from the instrument cluster installation area.
This information bulletin contains a background on the outside air temperature reading.
This bulletin contains a cleaning procedure from leftover residue from suction cups or labels.
New document 2004-2020 A4 allroad, A6 allroad, A8L, R8 Spyder
Engine
72 bulletinsThis bulletin provides information on the zirconium insercts in the brake piston (ceramic brakes only).
This bulletin provides informaiton when the engine is not running smoothly, misfiring.
This bulletin provides information regarding UV leak additive for finding oil leaks.
This bulletin provides information on the zirconium insercts in the brake piston (ceramic brakes only).
This bulleitn provides information regarding UV Leak additive for finding oil leaks.
This bulletin provides informatin when the engine does not run smoothly at idling speeds.
This bulletin provides information when the MIL is on; DTCs for misfire, air/fuel ratio imbalance, or lean fuel system...
Read full bulletin
stored in the ECM P030000.
This bulletin provides informatin when the engine does not run smoothly at idling speeds.
This bulletin provides informaion regarding zirconium inserts in the bake piston for vehicle equipped with ceramic...
Read full bulletin
brakes.
This bulletin provides information when ther is an Engine: start/stop system fault shown and start/stop system not is...
Read full bulletin
working; mileage below 50 km/32 miles.
This bulletin provides information when there is a fault shown; Engine: start/stop system, and the start system is not...
Read full bulletin
working; mileage below 50 km/32 miles.
Rattling or knocking noise from front end when driving over bumps.
Rattling/knocking noise from front end over bumps
Rattling or knocking noise from front end when driving over bumps
Rattling or knocking noise from front end when driving over bumps
Rattling or knocking noise from front end when driving over bumps
Rattling or knocking noise from front end when driving over bumps
Rattling or knocking noise from front end when driving over bumps
Rattling/knocking noise from front end over bumps
This Document informs dealers on the new oil consumption & piston fracture warranty extension for 2012 A4, A5, A6, Q5 &...
Read full bulletin
TT / 2013 A4, A5, A6, Q5 & TT / 2014 A4, A5, A6, Q5 & TT / 2016 A3 & TT / 2017 A3 & TT vehicles
Unnecessary High Pressure Fuel Pumps replacement due to Guided Fault Finding test plans not being performed or...
Read full bulletin
interrupted when the following DTC? s are present in the engine control module:
The Audi 2.0L Third Generation TDI Engine
This bulletin provides information on checking for debris when replacing an engine.
This bulletin provides information on the discontinuation and mixing of Audi-approved engine coolants.
Idenifying and mixing factory fill engine coolants
Because there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL...
Read full bulletin
to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
Because there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL...
Read full bulletin
to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
Under extreme driving conditions with the A/C compressor switched off (e.g., long idle periods or extended stop-and-go...
Read full bulletin
traffic), high temperatures can build up in the fuel rail and may lead to fluctuations in fuel pressure, possibly causing DTC P008700 to be stored. Coolant temperature above 102?C in the freeze frame data can be an indicator of those extreme driving conditions.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
Read full bulletin
When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows...
Read full bulletin
that the oil level is not okay.
Because there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL...
Read full bulletin
to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
Because there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL...
Read full bulletin
to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
Under extreme driving conditions with the A/C compressor switched off (e.g., long idle periods or extended stop-and-go...
Read full bulletin
traffic), high temperatures can build up in the fuel rail and may lead to fluctuations in fuel pressure, possibly causing DTC P008700 to be stored. Coolant temperature above 102?C in the freeze frame data can be an indicator of those extreme driving conditions.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
Read full bulletin
When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows...
Read full bulletin
that the oil level is not okay.
Because there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL...
Read full bulletin
to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
Because there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL...
Read full bulletin
to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
Under extreme driving conditions with the A/C compressor switched off (e.g., long idle periods or extended stop-and-go...
Read full bulletin
traffic), high temperatures can build up in the fuel rail and may lead to fluctuations in fuel pressure, possibly causing DTC P008700 to be stored. Coolant temperature above 102?C in the freeze frame data can be an indicator of those extreme driving conditions.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
Read full bulletin
When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows...
Read full bulletin
that the oil level is not okay.
The circlip connecting the turbo wastegate actuator rod and the wastegate flap lever can fall of due to low tension of the clip.
Read full bulletin
Consequently, the wastegate linkage becomes disconnected, causing MIL on and DTC P029900.
The circlip connecting the turbo wastegate actuator rod and the wastegate flap lever can fall of due to low tension of the clip.
Read full bulletin
Consequently, the wastegate linkage becomes disconnected, causing MIL on and DTC P029900.
Fuel level sensor, circuit range/performance - The ?check engine light? might illuminate with DTC P0461 stored in the engine control module.
Read full bulletin
No engine-related problems are present, and the vehicle is safe to drive.
Fuel level sensor, circuit range/performance - The ?check engine light? might illuminate with DTC P0461 stored in the engine control module.
Read full bulletin
No engine-related problems are present, and the vehicle is safe to drive.
Fuel level sensor, circuit range/performance - The ?check engine light? might illuminate with DTC P0461 stored in the engine control module.
Read full bulletin
No engine-related problems are present, and the vehicle is safe to drive.
Engine oils that meet Audi Oil Quality Standards.
After the engine is switched off, the fuel system creates a natural vacuum as the fuel in the fuel tank cools off.
Read full bulletin
If the natural vacuum leak detection (NVLD) system cannot detect this natural vacuum during the system self-test, the DTC will be stored in the ECM.
A small amount of dry or crusted coolant is seen on the coolant pump housing (Figure 1, Figure 2, and Figure 3).
Read full bulletin
The coolant level warning is not on. A minor coolant leak is possible during the break-in phase of the coolant seal on the coolant pump. The dry coolant marks are normal.
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not...
Read full bulletin
available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not...
Read full bulletin
available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines...
Read full bulletin
consume a certain amount of engine oil. Oil consumption varies from engine to engine, and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner?s Manual for specific break-in procedures.
In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines...
Read full bulletin
consume a certain amount of engine oil. Oil consumption varies from engine to engine, and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner?s Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, and the ambient temperature and road conditions. Additional factors include the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil. Utilizing the advanced sensor technology integrated in models equipped with the 3.0 TFSI engine, it is possible to measure oil consumption electronically via a Guided Function test plan.
Engine oil service - filter cartridge replacement.
Read full bulletin
When changing the oil filter and installing the new filter seal(s) in the oil filter housing, special attention is required.
The programmed values for the misfire adaption are not automatically reset when the memory is deleted.
Read full bulletin
The adaption must be reset after the engine is installed.
Humming or metallic rattling noise from under the vehicle, heard most consistently during engine idle or slow acceleration.
Read full bulletin
Initial inspection indicates that the noise is coming from the exhaust system. Relative movements in the rear mounting of the exhaust system (rear silencer).
The engine judders or runs erratically.
Read full bulletin
The vehicle judders during acceleration. No event entry is stored in the engine control module (ECM). The air mass meter is suspected to be faulty. Possible incorrect function on the sensor elements of the air mass meter.
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously.
Read full bulletin
Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously.
Read full bulletin
Drivers who consciously or unconsciously drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. As a result, application of the brake and accelerator pedals at the same time (brake pedal with left foot and accelerator pedal with right foot) results in the following: ? Brake pedal function (normal at all times) overrides any throttle application. ? Diagnostic Trouble Codes (DTCs) will not be stored. ? When the brake pedal is applied while the accelerator is depressed, engine RPMs will return to idle speeds of 1400 RPMs after approximately two seconds. ? When the accelerator is applied while the brake pedal is depressed, the vehicle accelerates slower than usual (reduced engine torque).
Battery testing and charging for vehicles equipped with a Battery Data Manager (BDM - J367).
Read full bulletin
When the InCharge 940 is used as a battery charger in auto mode, it performs a battery condition test and may prematurely fail the battery if the charging takes place at the jumper posts in the engine compartment. This is due to the added resistance in the system between the battery and jumper posts. When the InCharge 940 is used as a battery charger in manual mode, the battery condition test is not performed.
Humming or metallic rattling noise from under the vehicle, heard most consistently during engine idle or slow acceleration.
Read full bulletin
Initial inspection indicates that the noise is coming from the exhaust system. Relative movements in the rear mounting of the exhaust system (rear silencer).
This bulletin contains instructions for using the UV additive to find engine oil leaks.
The customer complains of hearing a creaking or knocking noise.
After the engine is switched off, the fuel system creates a natural vacuum as the fuel in the fuel ank cools off.
Read full bulletin
If the natural vacuum leak detection (NVLD)
Electronic oil consumption measurement.
This bulletin contains instructions for resolving a coolant leak.
This technical service bulletin reminds the reader to check for metal debris when replacing an engine.
This Document informs dealers on the new turbo warranty extension for 2013-2016 A4, 2013-2017 A5/Q5, and 2012-2015 A6...
Read full bulletin
vehicles
This bulletin contains instructions for resolving a coolant leak.
This bulletin contains instructions for resolving a coolant leak.
This bulletin contains instructions for using the UV additive to find engine oil leaks.
This bulletin contains instructions for resolving a coolant leak.
This bulletin contains instructions for using the UV additive to find engine oil leaks.
Steering
43 bulletinsThis bulletin provides information about vibrations and rotational steering vibrations.
This bulletin provides informaiotn regarding squeaking noises when steering or maneuvering.
This bulletin provides information about vibrations and rotational steering vibrations.
This bulletin provides information about the steering wheel alignment.
This bulletin provides information when there are vibrations and rotational steering wheel vibrations.
This bulletin provides information vibrations and rotational steering wheel vibrations.
This bulletin provides information vibrations and rotational steering wheel vibrations.
This bulletin provides information when there is noise while steering.
This bulletin provides information when there is noise while steering.
This bulletin provides information for when there is noise when steering.
This bulletin provides information if there is noise when steering the vehicle.
Steering wheel vibration and/or oscillation at low mileage - Repair Authorization
Steering wheel shimmy, vibration and/or oscillation
Steering wheel vibration and/or oscillation at low mileage - Repair Authorization
Steering wheel shimmy, vibration and/or oscillation
Steering wheel vibration and/or oscillation at low mileage - Repair Authorization
Steering rack control unit cannot be coded
Steering wheel shimmy, vibration and/or oscillation
Steering wheel vibration and/or oscillation at low mileage - Repair Authorization
Steering feels stiff when turning
Squeaking noises when steering or maneuvering
Steering wheel leather damage, all vehicles
Steering wheel shimmy, vibration, and/or oscillation
Squeaking noises when steering or maneuvering
This bulletin contains repair information for when there is a creaking/squeaking from the steering column when steering...
Read full bulletin
slowly.
Steering wheel shimmy, vibration and/or oscillation
Power Steering Control Unit Software (NVLW)
This bulletin provides information for instances where the steering wheel leather is damaged.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This bulletin states that squeaking noises which may be more prevalent in wet weather during steering is normal and...
Read full bulletin
repair is not needed.
This bulletin provides instructions for when a vibration is felt in the floor, seat, footwell, pedals or steering wheel...
Read full bulletin
while driving at highway speeds from 55 - 80 mph.
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering...
Read full bulletin
wheel isn't heating evenly.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This information bulletin provides an explanation for squeaking noises heard when the steering wheel is turned or...
Read full bulletin
maneuvered.
Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel.
This technical service bulletin informs the reader that damage to the appearance of the leather steering wheel caused by...
Read full bulletin
outside influence is not covered under warranty.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This Document informs dealers on the new electromechanical steering unit warranty extension for 2012-2015 Model Year...
Read full bulletin
Audi B8 (A4, Q5 & SQ5) and C7 (A6) Vehicles
This bulletin contains instructions for calibrating the steering angel sender G85.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
Electrical
42 bulletinsThe high-voltage batteries in electric vehicles are subject to various ageing effects which could lead to the energy...
Read full bulletin
content (energy density) being reduced. This reduction in the energy content, which is due to factors. Revised header. Added Model years
This bulletin provides additoinal information to assist in determining the energy content of lithium-ion high-voltage...
Read full bulletin
batteries.
This is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle...
Read full bulletin
programming function: The hotfix is to correct the issue: Issue seen: ODS5003E Infrastructure Guided Fault Finding: An internal fatal error occurred during the G929 - Vehicle Interior Carbon Dioxide Concentration Sensor function test plan. NOTE: This ODS error could show up on any other GFF function test plans as well.
This TSB provides information when the Audi advanced key is inoperative; door handle touch sensors.
This bulletin provides service-info relating to lithium-ion high-voltage batteries; determining energy content.
This bulletin provides service-info relating to lithium-ion high-voltage batteries; determining energy content.
This bulletin provides service-info relating to lithium-ion high-voltage batteries; determining energy content.
This bulletin provides information when the door handle touch sensors for Audi advanced key are inoperative.
This bulletin provides information when the door handle touch sensors for Audi advanced key are inoperative.
AC Pressure/Temperature Sensor
AC Pressure/Temperature Sensor
ECM Software Update (FED_EMS)
ECM Software Update (FED_EMS)
ECM Software Update
AC Pressure/Temperature Sensor
AC Pressure/Temperature Sensor (NVLW)
AC Pressure/Temperature Sensor (NVLW)
AC Pressure/Temperature Sensor
i-wire new wiring diagram application
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
Support for Customers Affected by Alternator Back-order
A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
Lane Change Assistant "Sensors Blocked" warning in DIS (DTC C1114F3 and C1115F5)
Lane Change Assistant "Sensors Blocked" warning in DIS (DTC C1114F3 and C1115F5)
A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
The NVLD pressure switch may erroneously detect a very small leak.
Read full bulletin
New pressure sensors in production: ? For vehicles with a fuel tank pressure sensor, G400, and a fuel tank leak detection control module, J909, that are separate (two components): part numbers 8K0906253 and 8K0906253B supersede to 8K0906253D. ? For vehicles with a fuel tank pressure sensor, G400, and a fuel tank leak detection control module, J909, which are integrated (one component): part numbers 8K0906253A and 8K0906253C supersede to 8K0906253E.
The customer complains of one or more of the following issues: ? When the vehicle is completely refueled, the vehicle...
Read full bulletin
range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. ? The displayed vehicle range drops inconsistently. ? After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. ? When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. ? There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Customer vehicle is fitted with unauthorized ECM tuning.
ECM software needs to be updated.
Key does not stay or engage in ignition lock
Low battery charge: Diagnosis tips and TAC instructions
Low battery charge: excess current draw location
Battery testing and charging - vehicles with BDM
It is possible that objects have been inserted into the ignition lock, which causes the slide of the ignition lock to...
Read full bulletin
become stuck in the rear part of the lock (S-contact position). The stuck slide is not allowed to return to the starting point (0-position).
This TSB provides basic diagnosis steps for discharged batteries, general tips for working with batteries, and system...
Read full bulletin
verification steps to ensure that the vehicle is configured correctly. For additional information on known current draw issues, refer to the following TSBs: ? 2014127: 27 Battery dead or low after returning to the vehicle (2007 A6, A8, Q7) ? 2019143: 27 Battery discharged on some vehicles with Advanced Key (2005 - 2008 A6, Q7)
Possible incorrect function on the sensor elements of the air mass meter.
90 "Ignition lock faulty" message in cluster information display.
This informational bulletin provides an explanation for the customer regarding known software issues with the MIB &...
Read full bulletin
MMI3G+ bluetooth security profile.
Brakes
32 bulletinsThis bulletin provides information about the general approach for brake vibration concerns.
This bulletin provides information when there is an ABS/ESC speed sensor implausible signal.
This bulletin provides information for all models regarding brake sounds.
This bulletin provides information for all models regarding brake sounds.
This bulletin provides information regarding the general approach for all Audi vehicles regarding brake vibrations.
This bulletin provides information when there is an ABS/ESC speed sensor implausible signal.
This bulletin provides information regarding the general approach to brakes rubbing.
This bulleitn provides information when there is an implausible signal in the ABS/ESC speed sensor.
Diagnosed and confirmed malfunction of the vehicles AEB system that resulted from failure or malfunction of the AEB...
Read full bulletin
systems control unit, camera(s), LIDAR, and/or sensor(s) which enable automatic emergency braking functionality.
Diagnosed and confirmed malfunction of the vehicles AEB system that resulted from failure or malfunction of the AEB...
Read full bulletin
systems control unit, camera(s), LIDAR, and/or sensor(s) which enable automatic emergency braking functionality.
ABS warning light on with additional warning lights on (EPB/TPMS/EPC/MIL) - Wire harness damage
Brake noise analysis and handling
Brake noise analysis and handling
Brake noise analysis and handling
Brake pulsation diagnostic guidelines
Shock absorber leaks: assessment aid
Brake pad wear warning - pads not at minimum
Shock absorber leaks: assessment aid
This bulletin provides information for when the ABS/ESC speed sensor has an implausible signal.
This bulletin provides information for when one or more DC is stored in the ABS control unit related to the parking...
Read full bulletin
switch; DTC C100C07 and/or C100C29.
This bulletin provides information for when there are noises when braking, and the brake pad thickness is OK.
This bulletin provides instructions for brake noise analysis and handling.
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
ABS warning light on - wire harness damage
This technical service bulletin provides troubleshooting for brake noise.
This technical service bulletin provides troubleshooting for brake noise.
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
This informational bulletin provides diagnostic information for brake conditions.
This technical service bulletin provides troubleshooting for brake noise.
This informational contains an explanation for when the customer hears creaking noises when braking at almost standstill...
Read full bulletin
(crawling when pulling away or briefly before standstill).
This technical service bulletin provides troubleshooting for brake noise.
This informational bulletin provides diagnostic information for brake conditions.
Infotainment
29 bulletinsThis bulletin provides information when there are speaker rattles, vibrations, or audio interference.
This bulleitn provides information whent here are complaints about route guidance with Navigation.
This bulletin provides information regarding various comlaints related to Apple CarPlay with Apple iOS devices.
This bulletin provides information when speaker rattles, vibrations, or audio interference is noted.
This bulletin proves information when the bluetooth does not work, adaption channel deactivated.
This bulletin proves information when the bluetooth does not work, adaption channel deactivated.
This bulletin provides informaiton when there are speaker rattles, vibrations or audio interference in the sound system.
This bulletin provides informaiton when there are speaker rattles, vibrations, or audio interference.A1
This bulletin provides information when there are speaker rattles, vibration or audio interference.
This bulletin provides informaiton when there are speaker rattles, vibrations, or audio interference.A1
This bulletin provides information when there are speaker rattles, vibration or audio interference.
This bulletin provides information pertaining to MMI Navigation database concerns.
This bulletin provides information for when the customer has concerns about the navigation route guidance.
This bulletin provides information on how to update the navigation map.
91 Generation III radio: Loose or broken control knobs
This bulletin advises that the MMI screen may freeze, or go blank and then restart when a special character like a...
Read full bulletin
symbol or emoticon is used in the name field for contact(s).
Radio station or Media track information does not show in cluster DIS - Gen 3 Concert Radio
This informational bulletin contains instructions for when the message "Audi pre sense currently restricted.
Read full bulletin
See owner's manual" is displayed in the instrument cluster without DTCs.
This informational bulletin contains instructions about updating the navigation map.
The navigation DVD or other CD/DVD cannot be ejected.
Components on the doors or the parcel shelf vibrate while heavy bass audio is played.
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
Elsa2Go campaign information is now 100% aligned with ElsaPro.
Read full bulletin
This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time without any discrepancy.
This informational bulletin contains instructions about updating the navigation map.
This bulletin contains a guide for troubleshooting HD radio issues.
This informational bulletin explains when the range display is empty in the on-board computer.
This technical service bulletin provides troubleshooting for issues with the navigation map database.
This informational bulletin contains instructions for when a phone is connected to the vehicle via Bluetooth, one of the...
Read full bulletin
following conditions occurs when the user searches for a contact name in the MMI address book (by using the MMI control knob or the voice recognition system): *The MMI screen goes blank then restarts. *The MMI screen freezes for a few minutes then recovers.
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
Software & Calibration
27 bulletinsThis is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle...
Read full bulletin
programming function: A software fix is needed to correct the issue: The ODIS Audi Brand update 2.41.1 is setting a ODS5003E error code when you perform the 90TV SVM flash.
This bulletin provides information on how to set up and use the FMC for obtaining vehicle software updates (SD Creator...
Read full bulletin
decomissioned).
Removed expiration date, Updated part numbers in parts and claiming sections, General circular updates
Removed expiration date, Updated part numbers in parts and claiming sections, General circular updates
This bulletin provides information for when the lane change assist radars cannot be calibrated after replacement.
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
Technical bulletins and updates
ElsaPro Software update and technical bulletins
Technical bulletins and updates
Technical bulletins and updates
Updates and suggestions
Diagnostics and updates
Technical bulletins and updates
Technical bulletins and updates
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM)...
Read full bulletin
software update for any TSB or Update.
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM)...
Read full bulletin
software update for any TSB or Update.
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM)...
Read full bulletin
software update for any TSB or Update.
This bulletin contains general instructions for software updates.
Dealer Communication - Vehicle Sales Reporting, Reinstatement, and Audit Policy Update - Effective September 30, 2021
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
SERV_ACT - After-Run Coolant Pump - Updated claiming and work instructions: A single part number per criteria will now...
Read full bulletin
be used.
Fuel System
24 bulletinsThis bulletin provides information when there is corrosion on the exhaust tail pipes.
This bulletin provides information when there are functional restrictions or driving behavior due to diesel detected in...
Read full bulletin
petrol.
This bulletin provides service information ror when the fuel tank cannot be fully filled.
This bulletin provides information when there are functional restrictions or driving behavior due to diesel detected in...
Read full bulletin
petrol.
This bulletin provides service information ror when the fuel tank cannot be fully filled.
Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the...
Read full bulletin
State of Minnesota.
Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the...
Read full bulletin
State of Minnesota.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
EVAP System Leak Detected NVLD very small leak
Under extreme driving conditions with the A/C compressor switched off, high temperatures can build up in the fuel rail...
Read full bulletin
and may lead to fluctuations in fuel pressure, possibly causing DTC P008700 to be stored.
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more...
Read full bulletin
conditions.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis.
Read full bulletin
Media files can now be viewed on any smartphone or tablet.
Under extreme driving conditions with the A/C compressor switched off, high temperatures can build up in the fuel rail...
Read full bulletin
and may lead to fluctuations in fuel pressure, possibly causing DTC P008700 to be stored.
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more...
Read full bulletin
conditions.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis.
Read full bulletin
Media files can now be viewed on any smartphone or tablet.
Under extreme driving conditions with the A/C compressor switched off, high temperatures can build up in the fuel rail...
Read full bulletin
and may lead to fluctuations in fuel pressure, possibly causing DTC P008700 to be stored.
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more...
Read full bulletin
conditions.
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis.
Read full bulletin
Media files can now be viewed on any smartphone or tablet.
EVAP System Leak Detected NVLD (very small leak))
These noises may be a result of contact between an exhaust heat shield and the body of the vehicle.
Read full bulletin
Rattling noises are heard coming from underneath the vehicle.
Rattling noises are heard coming from underneath the vehicle.
Read full bulletin
These noises may be a result of contact between an exhaust heat shield and the body of the vehicle.
The informational bulletin explains why during COVID-19 there is winter-blend fuel during a warmer season and causing...
Read full bulletin
some issues.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
Body & Paint
22 bulletinsThis TSB describes a corrosion issue due to outside influence and the prohibition of warranty in these cases.
This bulletin provides information when there is a paint issue on alloy wheels.
This bulletin provides information when there is a film/visible rings on the clear glass cover of the headlight when the...
Read full bulletin
dipped beam is switched on.
This bulletin provides information when tehre is a paint issue on alloy wheels.
This bulletin provides information when there is corrosion on the tailpipes.
This TSB provides information when the exterior rubber trim is spotted.
This bulletin provides informationw hen there are car was brush bristles trapped in the seam between the headlight and...
Read full bulletin
fender.
This bulletin provides information when the sunglass holder will not close or is stuck closed.
This bulletin provides information for when there are noises from the headliner/sunroof area.
This bulletin provides information on how to set up and use the SD Creator for obtaining vehicle software updates via...
Read full bulletin
the Mirror Server.
This bulletin provides information for when exterior glass cleaning is needed.
This bulletin provides information for when car wash bristles become stuck in the body gap between the headlight and...
Read full bulletin
fender.
This bulletin describes the process to clean sticker residue from the windshield.
Windows XP- End of Support (EOS) and new VAS diagnostic services
This bulletin provides instructions for when the exterior trim has spots.
This bulletin provides instructions for when faint images appear on the windshield from the production sticker, or an...
Read full bulletin
image of the suction cups used to install the windshield in production.
96 Alarm sounds when driver door is unlocked with mechanical key
Sunglass holder will not close
This bulletin provides instructions on how to properly clean exterior glass.
Wind noise from Exterior Mirror.
This bulletin provides instructions on how to clean exterior glass.
This bulletin provides instructions on how to clean exterior glass.
Tires & Wheels
22 bulletinsThis TSB provides information regarding rotational and other steerihng wheel vibrations.
This bulletin provides information when noises from wheel input shaft/drive shaft are reported.
This bulletin provides information regarding wheel alignment.
This bulletin provides service information pertaining to noises from wheel input shaft/drive shaft.
Alignment - Repair Authorization
Tightening wheel bolts
Alignment - Repair Authorization
Message "TPMS" in dash insert
Message "TPMS" in instrument cluster
Tightening wheel bolts
Audi Normal Load Condition Tire Pressure Table
Audi Tire Chain Information by Vehicle -- MY 2014
Audi Tire Chain Information by Vehicle -- MY 2014
Audi Tire Chain Information by Vehicle -- MY 2014
Tire Pressure Table.
Tire Pressure Table.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
2014 Audi Normal Load Condition Tire Pressure Table.
This informational bulletin explains how the temporary/collapsible spare wheel inflates.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
Read full bulletin
2015-2020 A3 Cabriolet, 2016-2018 A3 Sportback, 2008-2009 S4 Cabriolet, 2008 and 2010 RS4 Cabriolet, 2018-2020 A5 Sportback, 2010-2012 and 2018-2020 RS5 Cabriolet, 2018-2020 S5 Sportback, 2008 A7, 2008-2011 S7
Lighting
18 bulletinsThis TSB provides informatin when the cigarette lighter element does not eject, or the cigarette lighter is inoperable.
This bulletin provides informationw hen there are optical concerns with the tail lights.
This bulletin provides informationw hen there are optical concerns with the tail lights.
This bulletin provides information on visual concerns with the headlight lens.
This bulletin provides information pertaining to when there are foreign objects inside of a headlight or taillight.
2014 Scheduled Maintenance Intervals\
This bulletin provides detailed information on the proper documentation of optical concerns for headlights and...
Read full bulletin
taillights.
This bulletin provides details on how to properly document optical concerns in headlights and taillights for warranty...
Read full bulletin
submissions.
When oil is drained through the drain plug, the oil might spill on components around the oil pan area.
Read full bulletin
If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
When oil is drained through the drain plug, the oil might spill on components around the oil pan area.
Read full bulletin
If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
When oil is drained through the drain plug, the oil might spill on components around the oil pan area.
Read full bulletin
If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
This informational bulletin contains information on the different shading of LED headlights.
This bulletin contains information regarding when the message 'Vehicle lights: malfunction' appears with DTC 03280,...
Read full bulletin
01800, or B126AF0.
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
Exterior lights, moisture accumulation 2013-2021 A3 Cabriolet, 2016-2018 Sportback, 2004-2005 A4 Cabriolet, 2004-2008...
Read full bulletin
S4 Cabriolet, 2008 RS4 Cabriolet, 2010-2021 A4 allroad, 2018-2021 A5 Sportback, 2010-2012, 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2004-2006 A7, 2004-2011 S7, 2021 RS6 Avant, 2004-2006 S8
This informational bulletin contains instructions for when car wash bristles are stuck in the headlights.
Read full bulletin
2015-2021 A3 Cabriolet, 2015-2018 A3 e-tron, 2011-2021 A4 allroad, 2018-2021 A5 Sportback, 2011-2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 RS6 Avant
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
Read full bulletin
2015-2021 A3 Cabriolet, 2016-2018 A3 Sportback, 2018-2021 A5 Sportback, 2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 RS 6 Avant
Pre-Delivery & Maintenance
16 bulletinsThis bulletin provides service infrmation for workshop mode with Audi connect vehicles.
This service information TSB describes a cosmetic issue after using a car wash.
Vehicle Concerns Before Recall Repair Available
Pending service solutions and bulletins
Product quality is Announcing a new innovation in technical service bulletins: portable, easy to access videos
This bulletin contains instructions for when the zirconium inserts found to be not firmly attached during service work.
SAFETY RECALLS, COMPLIANCE RECALLS and STOP SALES
This technical service bulletin provides troubleshooting information for the vehicle locking system.
Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts.
Read full bulletin
In an effort to gain information on the DTC code listed above, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any potential issues with the condition noted above.
Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts.
Read full bulletin
In an effort to gain information on the DTC code listed above, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any potential issues with the condition noted above.
Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts.
Read full bulletin
In an effort to gain information on the DTC code listed above, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any potential issues with the condition noted above.
Maintenance.
This technical service bulletin provides troubleshooting information for the vehicle locking system.
This informational contains instruction on how to document optical concerns for warranty claims.
Recall Reminder Part Labels
The communication contains the details of the water pump extended warranty.
Transmission
15 bulletinsThis bulletin provides infomraiotn when there is a gearbox malfunction message in the instrument clostuer; DTC P0706;...
Read full bulletin
vehicles with 0AW gearbox.
This bulleitn procides informaiton when tehre is a transmission warning mssage in the instrument cluster; P074100 is...
Read full bulletin
stored in the TCM.
This bulletin provides informaiton when the transmission warning message appears in the cluster; P074100 stored in the...
Read full bulletin
TCM.
This bulletin provides information about replacing the clutch end cover.
This bulletin provides information about replacing the clutch end cover.
Jerky accelerator response in reverse gear
Transmission warning message in cluster (P074100 stored in TCM)
Rough gear changes both when accelerating and slowing down
Customer may report harsh shift concerns; no faults are stored and concern is reproducible
Vehicle does not start or only starts when the clutch pedal is pressed very firmly
TAC must be contacted before any repairs are attempted.
Read full bulletin
Specific information about the concern must be gathered (as described in the Service portion of this bulletin) before TAC is contacted. Customer may report harsh shift concerns, but the customer is unable to determine the shift point because there is no gear indicator in the cluster. The concern can be reproduced.
A jerky accelerator response is felt when the vehicle is pulled away from a stop in reverse.
Read full bulletin
Incorrect calibration of clutch program. New software in the transmission control module (TCM), J217 (address word 02) addressed the condition.
After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component.
Read full bulletin
This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
There may be clutch mechanism wear.
Read full bulletin
Customer may report that the vehicle does not start or only starts when the clutch pedal is pressed very firmly. The message ?Press clutch pedal to start vehicle? may appear in the instrument cluster.
This bulletin contains instructions for addressing a leak from the transmission oil pan gasket or transfer case.
HVAC & Climate
13 bulletinsThis bulletin provides information on the GFF test plan required for AC compressor replacements regardless of the...
Read full bulletin
concern.
This bujlletin provides information regarding the GFF test plan required for A/C compressor replacements regardless of...
Read full bulletin
the concern.
This bulletin provides information regarding the GFF test plan required for A/C compressr replaements regardless of the...
Read full bulletin
concern.
This bulletin provides information when a GFF test plan required for A/C compressor replacements regardless of concern.
This bulletin provides information pertaining to the GFF test plan required for A/C compressore replacements, regardless...
Read full bulletin
of the concern.
This bulletin provides informatin for the GFF test plan that is requied for AC compressor replacements.
This bulletin provides information when the air conditioning is no longer operative; DTC 00457, 00256, 01592.
This bulletin provides information on the GFF test plan required when replacing the A/C compressor.
This bulletin provides instructions for when the customer advises that there is insufficient or uneven cabin heating...
Read full bulletin
from the HVAC system.
This informational bulletin details on how to get a GFF test plan for A/C compressor replacements.
This informational bulletin details on how to get a GFF test plan for A/C compressor replacements.
This bulletin contains repair instructions for when there is radio static when the rear heater is active.
This bulletin contains instructions for addressing an insufficient or uneven heating performance from the HVAC system.
Suspension
10 bulletinsNoise from rear suspension - Repair Authorization
Rattle noise from rear suspension
Rattle noise from rear suspension
Noise from rear suspension - Repair Authorization
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
This bulletin describes the proper procedure to address a clicking or clacking noise from the wheel bearing
This bulletin describes the proper procedure to address a clicking or clacking noise from the wheel bearing
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
This bulletin contains instructions for determining if bushings need to be replaced.
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
Air Bags & Safety
5 bulletinsThis Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the...
Read full bulletin
airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent warning regarding counterfeit...
Read full bulletin
replacement airbag inflators that are being installed in used vehicles.
This Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the...
Read full bulletin
airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.
This bulletin advises on identifying when a foreign object has obstructed normal operation of the seat belt.
This bulletin contains instructions for additional reporting requirements for safety related inquiries...
Read full bulletin
(airbag/seatbelts, accidents, fire and overheat damage).
Hybrid & EV
2 bulletinsThis document provides clarity on the MY24 Audi Q5 Hybrid fault code with technical service bulletin release on Monday,...
Read full bulletin
June 24.
This document provides clarity on the MY24 Audi Q5 Hybrid fault code with technical service bulletin release on Monday,...
Read full bulletin
June 24.