2025 Alfa Romeo Tonale TSBs

fails to detect the key fob inside the cabin, and a Low Battery message is displayed on the Instrument Panel Cluster (IPC). This bulletin involves replacing the key fob battery.

NOTE: The depleted battery is due to a high Ignition Off Draw (IOD) current. This bulletin involves reprogramming the BCM with the latest available software.

BCM, a flash file does not appear / display in wiTECH

'Cabin Preconditioning Unavailable' message present when the scheduled cabin condition is not performed as planned. This bulletin involves reprogramming the Auxiliary Hybrid Control Processor (AHCP) and Hybrid Control Processor (HCP) also known as PIM, with the latest available software

Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): B1E21-96 - Backup Battery Component Internal Failure.

the radio: "Battery of Uconnect Box requires service. SOS call and related functions may be unavailable. Please visit an authorized dealer." PLEASE do not Replace the TBM module, only replace TBM Internal Battery (inside Telematics Box Module) and order PN68493347

Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): B1E21-96 - Backup Battery Component Internal Failure

Upon further investigation the technician must find the following Diagnostic Trouble Code (DTC) has been set:** C1409-97 - Radar Sensor Blind - Component Or System Operation Obstructed Or Blocked. In addition, the customer must also comment on one or more of the following: "ACC not available" message displayed on the Instrument Panel Cluster (IPC). "Highway Assist not available" message displayed on the IPC.** Highway Assist steering wheel vibration This bulletin involves updating the DASM with the latest available software.

Avoid Damage to the Integrated Dual Charge Module (IDCM)

and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P2450 - Fuel Tank Isolation Valve "A" Circuit Open. Customers may experience the following: Fuel door will not open This bulletin involves reprogramming the PCM with the latest available software.

Confirm if coolant is visibly dripping from the weeper chamber. 2.Root Cause identification The weeper chamber is designed to collect small amounts of coolant (< 3 ml/h) that pass through the dynamic seal. Red traces or shadows around the chamber may appear during initial operation due to seal adaptation or vapor condensation. These traces are not necessarily signs of a leak. Continuous dripping of coolant, however, indicates a malfunction. 3.Service Repair Procedure Lift the vehicle using an elevator. Verify if coolant is actively dripping from the weeper chamber. Run the engine at idle, alternating speed between 2000 4000 rpm for 15 minutes. Observe the weeper chamber during this test: If coolant continues to drip: Replace the water pump (possible permanent damage to the dynamic seal). If dripping stops: No further action is needed; the vehicle can be returned to the customer. 4.Clarify Leak Sources Do not confuse leaks from: The Press-In-Place rubber gasket (between water pump and engine block), or The inlet pipe nipples with leaks from the weeper chamber.

Upon further investigation the technician must find one or more of the following Diagnostic Trouble Codes (DTC)s have been set: P012C - Turbocharger/Supercharger Inlet Air Pressure Sensor 1 Circuit Low. P012D - Turbocharger/Supercharger Inlet Air Pressure Sensor 1 Circuit High. P006C-MAP - Turbocharger Inlet Air Pressure Correlation. "

on the Instrument Panel Cluster (IPC) shortly after taking delivery of the vehicle within 6,437 Km (4,000 mi). This bulletin involves resetting the oil life monitor and if necessary, changing the engine oil and filter. "

If the block machining is not complete according to information in SOL, a new long block will need to be ordered.

This bulletin involves ordering a new key fob and handing the it to the customer or placing it in the vehicle."

involves ordering a new keyfob and handing the it to the customer or placing it in the vehicle. "

missing, display abnormal or screen blank

missing, display abnormal or screen blank

TBM Setting Stored Or Pending DTCs B22A9, B1560, B1561, B1562

Follow the Infotainment Ordering guide available under the "Parts" section of Dealer Connect: DealerCONNECT> Parts> News& Information> Audio & Electronic Products Exchange Process

Condensation/water intrusion can be seen inside the liftgate tail lamp assembly. This bulletin involves inspecting and possibly replacing the liftgate tail lamp assembly and nameplate.

chatter/streak/jump/skip/smear or make noise while traveling across the windshield. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.

performing a scheduled cabin preconditioning. 'Cabin Preconditioning Unavailable' message present in the Instrument Panel Cluster (IPC) when the scheduled cabin condition is not performed as planned.** , Labor Description, Repair Procedure steps

lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*

Possible DTCs P2453, P2455, P2461.

that their Heated Seats and Heated Steering Wheel will turn off or become disabled (button grayed out on display screen) while driving the vehicle.

This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from 5.49.0, 5.53.0 or 5.43 to 5.53 software level. NOTE: National launch for this FOTA update is expected to begin: April 14, 2025.

show the Charge/Climate Summary popup after key off. Performance Pages disappear. Blind spot chime does not work if CAN activation signals duration is less than two seconds.** Speed limit sign on Instrument Panel Cluster (IPC) is showing incorrect speed. Touch freeze/Disassociated Center Stack Display (DCSD) off. CP/AA wireless disconnection This bulletin involves inspecting radio software level and if the software level is at or below U27.52, updating it with a USB to U29.42 first and then a second update to U33.43.**

C and TSB 08-044-24 REV.C